Distributed Orientation Agreement in a Group of Robots

In this article, a method for the agreement of a set of robots on a common reference orientation based on a distributed consensus algorithm is described. It only needs that robots detect the relative positions of their neighbors and communicate with them. Two different consensus algorithms based on the exchange of information are proposed, tested and analyzed. Systematic experiments were carried out in simulation and with real robots in order to test the method. Experimental results show that the robots are able to agree on the reference orientation under certain conditions. Scalability with an increasing number of robots was tested successfully in simulation with up to 49 robots. Experiments with real robots succeeded proving that the proposed method works in reality.

Kinematic analysis of a novel 2-d.o.f. orientation device

This paper presents the development of a new parallel robot designed for helping with bone milling surgeries. The robot is a small modular wrist with 2 active degrees of freedom, and it is proposed to be used as an orientation device located at the end of a robotic arm designed for bone milling processes. A generic kinematic geometry is proposed for this device. This first article shows the developments on the workspace optimization and the analysis of the force field required to complete a reconstruction of the inferior jawbone. The singularities of the mechanism are analyzed, and the actuator selection is justified with the torque requirements and the study of the force space. The results obtained by the simulations allow building a first prototype using linear motors. Bone milling experiment video is shown as additional material.

Influence of substrate type and orientation on the morphology and optical properties of selective area growth of GaN and InGaN nanocolumns

A relevant issue concerning optoelectronic devices based on III-nitrides is the presence of strong polarization fields that may reduce efficiency.

Relating dominance of dialogue participants with their verbal intelligence scores

In this work we investigated whether there is a relationship between dominant behaviour of dialogue participants and their verbal intelligence. The analysis is based on a corpus containing 56 dialogues and verbal intelligence scores of the test persons. All the dialogues were divided into three groups: H-H is a group of dialogues between higher verbal intelligence participants, L-L is a group of dialogues between lower verbal intelligence participant and L-H is a group of all the other dialogues. The dominance scores of the dialogue partners from each group were analysed. The analysis showed that differences between dominance scores and verbal intelligence coefficients for L-L were positively correlated. Verbal intelligence scores of the test persons were compared to other features that may reflect dominant behaviour. The analysis showed that number of interruptions, long utterances, times grabbed the floor, influence diffusion model, number of agreements and several acoustic features may be related to verbal intelligence. These features were used for the automatic classification of the dialogue partners into two groups (lower and higher verbal intelligence participants); the achieved accuracy was 89.36%.

Improving Collaborative Filtering Based Recommender Systems Using Pareto Dominance

Los sistemas de recomendación son un tipo de solución al problema de sobrecarga de información que sufren los usuarios de los sitios web en los que se pueden votar ciertos artículos. El sistema de recomendación de filtrado colaborativo es considerado como el método con más éxito debido a que sus recomendaciones se hacen basándose en los votos de usuarios similares a un usuario activo. Sin embargo, el método de filtrado de colaboración tradicional selecciona usuarios insuficientemente representativos como vecinos de cada usuario activo. Esto significa que las recomendaciones hechas a posteriori no son lo suficientemente precisas. El método propuesto en esta tesis realiza un pre-filtrado del proceso, mediante el uso de dominancia de Pareto, que elimina los usuarios menos representativos del proceso de selección k-vecino y mantiene los más prometedores. Los resultados de los experimentos realizados en MovieLens y Netflix muestran una mejora significativa en todas las medidas de calidad estudiadas en la aplicación del método propuesto. ABSTRACTRecommender systems are a type of solution to the information overload problem suffered by users of websites on which they can rate certain items. The Collaborative Filtering Recommender System is considered to be the most successful approach as it make its recommendations based on votes of users similar to an active user. Nevertheless, the traditional collaborative filtering method selects insufficiently representative users as neighbors of each active user. This means that the recommendations made a posteriori are not precise enough. The method proposed in this thesis performs a pre-filtering process, by using Pareto dominance, which eliminates the less representative users from the k-neighbor selection process and keeps the most promising ones. The results from the experiments performed on Movielens and Netflix show a significant improvement in all the quality measures studied on applying the proposed method.

Dominance intensity measure within fuzzy weight oriented MAUT: an application

We introduce a dominance intensity measuring method to derive a ranking of alternatives to deal with incomplete information in multi-criteria decision-making problems on the basis of multi-attribute utility theory (MAUT) and fuzzy sets theory. We consider the situation where there is imprecision concerning decision-makers’ preferences, and imprecise weights are represented by trapezoidal fuzzy weights.The proposed method is based on the dominance values between pairs of alternatives. These values can be computed by linear programming, as an additive multi-attribute utility model is used to rate the alternatives. Dominance values are then transformed into dominance intensity measures, used to rank the alternatives under consideration. Distances between fuzzy numbers based on the generalization of the left and right fuzzy numbers are utilized to account for fuzzy weights. An example concerning the selection of intervention strategies to restore an aquatic ecosystem contaminated by radionuclides illustrates the approach. Monte Carlo simulation techniques have been used to show that the proposed method performs well for different imprecision levels in terms of a hit ratio and a rank-order correlation measure.

A new dominance intensity method to deal with ordinal information about a DM's preferences within MAVT

Dominance measuring methods are a new approach to deal with complex decision-making problems with imprecise information. These methods are based on the computation of pairwise dominance values and exploit the information in the dominance matrix in dirent ways to derive measures of dominance intensity and rank the alternatives under consideration. In this paper we propose a new dominance measuring method to deal with ordinal information about decision-maker preferences in both weights and component utilities. It takes advantage of the centroid of the polytope delimited by ordinal information and builds triangular fuzzy numbers whose distances to the crisp value 0 constitute the basis for the de?nition of a dominance intensity measure. Monte Carlo simulation techniques have been used to compare the performance of this method with other existing approaches.

Dominance intensity methods for ranking of alternatives in mcdm with imprecise information

Los decisores cada vez se enfrentan a problemas más complejos en los que tomar una decisión implica tener que considerar simultáneamente muchos criterios que normalmente son conflictivos entre sí. En la mayoría de los problemas de decisión es necesario considerar criterios económicos, sociales y medioambientales. La Teoría de la Decisión proporciona el marco adecuado para poder ayudar a los decisores a resolver estos problemas de decisión complejos, al permitir considerar conjuntamente la incertidumbre existente sobre las consecuencias de cada alternativa en los diferentes atributos y la imprecisión sobre las preferencias de los decisores. En esta tesis doctoral nos centramos en la imprecisión de las preferencias de los decisores cuando éstas pueden ser representadas mediante una función de utilidad multiatributo aditiva. Por lo tanto, consideramos imprecisión tanto en los pesos como en las funciones de utilidad componentes de cada atributo. Se ha considerado el caso en que la imprecisión puede ser representada por intervalos de valores o bien mediante información ordinal, en lugar de proporcionar valores concretos. En este sentido, hemos propuesto métodos que permiten ordenar las diferentes alternativas basados en los conceptos de intensidad de dominación o intensidad de preferencia, los cuales intentan medir la fuerza con la que cada alternativa es preferida al resto. Para todos los métodos propuestos se ha analizado su comportamiento y se ha comparado con los más relevantes existentes en la literatura científica que pueden ser aplicados para resolver este tipo de problemas. Para ello, se ha realizado un estudio de simulación en el que se han usado dos medidas de eficiencia (hit ratio y coeficiente de correlación de Kendall) para comparar los diferentes métodos. ABSTRACT Decision makers increasingly face complex decision-making problems where they have to simultaneously consider many often conflicting criteria. In most decision-making problems it is necessary to consider economic, social and environmental criteria. Decision making theory provides an adequate framework for helping decision makers to make complex decisions where they can jointly consider the uncertainty about the performance of each alternative for each attribute, and the imprecision of the decision maker's preferences. In this PhD thesis we focus on the imprecision of the decision maker's preferences represented by an additive multiattribute utility function. Therefore, we consider the imprecision of weights, as well as of component utility functions for each attribute. We consider the case in which the imprecision is represented by ranges of values or by ordinal information rather than precise values. In this respect, we propose methods for ranking alternatives based on notions of dominance intensity, also known as preference intensity, which attempt to measure how much more preferred each alternative is to the others. The performance of the propose methods has been analyzed and compared against the leading existing methods that are applicable to this type of problem. For this purpose, we conducted a simulation study using two efficiency measures (hit ratio and Kendall correlation coefficient) to compare the different methods.

TEM study of the AlN grain orientation grown on NCD diamond substrate

Piezoelectric AlN layer grain orientation, grown by room temperature reactive sputtering, is analyzed by transmission electron microscopy (TEM).Two types of samples are studied: (i) AlN grown on well-polished NCD (nano-crystalline diamond) diamond, (ii) AlN grown on an up-side down NCD layer previously grown on a Si substrate, i.e. diamond surface as smooth as that of Si substrates. The second set of sample show a faster lignment of their AlN grain caxis attributed to it smoother diamond free surface. No grain orientation relationship between diamond substrate grain and the AlN ones is evidenced, which seems to indicate the preponderance role of the surface substrate state.

Dominance measuring methods within MAVT/MAUT with imprecise information concerning decision-makers'preferences

Dominance measuring methods are an approach for dealing with complex decision-making problems with imprecise information within multi-attribute value/utility theory. These methods are based on the computation of pairwise dominance values and exploit the information in the dominance matrix in different ways to derive measures of dominance intensity and rank the alternatives under consideration. In this paper we review dominance measuring methods proposed in the literature for dealing with imprecise information (intervals, ordinal information or fuzzy numbers) about decision-makers? preferences and their performance in comparison with other existing approaches, like SMAA and SMAA-II or Sarabando and Dias? method.

What is the optimal stitching orientation from an aerial survey perspective?

Mosaicing is a technique that allows obtaining a large high resolution image by stitching several images together. These base images are usually acquired from an elevated point of view. Until recently, low-altitude image acquisition has been performed typically by using using airplanes, as well as other manned platforms. However, mini unmanned aerial vehicles (MUAV) endowed with a camera have lately made this task more available for small for cicil applications, for example for small farmers in order to obtain accurate agronomic information about their crop fields. The stitching orientation, or the image acquisition orientation usually coincides with the aircraft heading assuming a downwards orientation of the camera. In this paper, the efect of the image orientation in the eficiency of the aerial coverage path planning is studied. Moreover, an algorithm to compute an optimal stitching orientation angle is proposed and results are numerically compared with classical approaches.

Veto values in Group Decision Making within MAUT: aggregating complete rankings derived from dominance intensity measures

We consider a groupdecision-making problem within multi-attribute utility theory, in which the relative importance of decisionmakers (DMs) is known and their preferences are represented by means of an additive function. We allow DMs to provide veto values for the attribute under consideration and build veto and adjust functions that are incorporated into the additive model. Veto functions check whether alternative performances are within the respective veto intervals, making the overall utility of the alternative equal to 0, where as adjust functions reduce the utilty of the alternative performance to match the preferences of other DMs. Dominance measuring methods are used to account for imprecise information in the decision-making scenario and to derive a ranking of alternatives for each DM. Specifically, ordinal information about the relative importance of criteria is provided by each DM. Finally, an extension of Kemeny's method is used to aggregate the alternative rankings from the DMs accounting for the irrelative importance.

Orientation in operator algebras

A concept of orientation is relevant for the passage from Jordan structure to associative structure in operator algebras. The research reported in this paper bridges the approach of Connes for von Neumann algebras and ourselves for C*-algebras in a general theory of orientation that is of geometric nature and is related to dynamics.

Orientation-dependent and sequence-specific expansions of CTG/CAG trinucleotide repeats in Saccharomyces cerevisiae

A quantitative and selective genetic assay was developed to monitor expansions of trinucleotide repeats (TNRs) in yeast. A promoter containing 25 repeats allows expression of a URA3 reporter gene and yields sensitivity to the drug 5-fluoroorotic acid. Expansion of the TNR to 30 or more repeats turns off URA3 and provides drug resistance. When integrated at either of two chromosomal loci, expansion rates were 1 × 10−5 to 4 × 10−5 per generation if CTG repeats were replicated on the lagging daughter strand. PCR analysis indicated that 5–28 additional repeats were present in 95% of the expanded alleles. No significant changes in CTG expansion rates occurred in strains deficient in the mismatch repair gene MSH2 or the recombination gene RAD52. The frequent nature of CTG expansions suggests that the threshold number for this repeat is below 25 in this system. In contrast, expansions of the complementary repeat CAG occurred at 500- to 1,000-fold lower rates, similar to a randomized (C,A,G) control sequence. When the reporter plasmid was inverted within the chromosome, switching the leading and lagging strands of replication, frequent expansions were observed only when CTG repeats resided on the lagging daughter strand. Among the rare CAG expansions, the largest gain in tract size was 38 repeats. The control repeats CTA and TAG showed no detectable rate of expansions. The orientation-dependence and sequence-specificity data support the model that expansions of CTG and CAG tracts result from aberrant DNA replication via hairpin-containing Okazaki fragments.