Decomposição térmica de complexos de Zn e Cd com isomaleonitriladitiolato (imnt)

Thermal decomposition of [Bu4N]2[Zn(imnt)2] and [M(NH3)2(imnt)] complexes with M = Zn and Cd, and imnt = (bis 1,1-dicyanoethylene-2,2 dithiolate) in inert atmosphere was investigated by thermogravimetric analysis (TG) and differential scanning calorimetry (DSC). Pyrolysis studies at different temperatures, 300, 400, 500, and 600 ºC, in N2 atmosphere were performed and the products were characterized by X-ray diffraction (XRD), infrared and Raman spectroscopy, and scanning electron microscopy (SEM). The products were identified as sulfide sub-micron particles, along with amorphous carbon. Particle sizes estimated by SEM were ca. 50 nm for the cationic complexes and 500 nm for the neutral complexes.

Emprego do carvão ativado para remoção de cobre em cachaça

Copper content is of great concern among sugarcane-spirit producers. It is released from copper-made distillers, during the distillation process. Activated carbon has been used to remove copper. However, depending on the amount of carbon and the duration of reaction, it can also remove higher alcohols and esters, which are important in the final product. A sugarcane spirit with 9 mg L-1 of copper was shaken with 2 to 26 g L-1 of activated carbon, during 10 to 1440 minutes. Then, copper and organic compounds were measured. At least 12 g L-1 of carbon and 60 min shaking time were necessary to decrease copper bellow 5 mg L-1. However, other components of the product were also affected.

Produção de hidrogênio a partir da reforma a vapor de etanol utilizando catalisadores Cu/Ni/gama-Al2o3

Cu/Ni/gamma-Al2O3 catalysts were prepared by an impregnation method with 2.5 or 5% wt of copper and 5 or 15% wt of nickel and applied in ethanol steam reforming. The catalysts were characterized by atomic absorption spectrophotometry, X-ray diffraction, temperature programmed reduction with hydrogen and nitrogen adsorption. The samples showed low crystallinity, with the presence of CuO and NiO, both as crystallites and in dispersed phase, as well as of NiO-Al2O3. The catalytic tests carried out at 400 ºC, with a 3:1 water/ethanol molar ratio, indicated the 5Cu/5Ni/Al2O3 catalyst as the most active for hydrogen production, with a hydrogen yield of 77% and ethanol conversion of 98%.

Emprego de sílica gel organicamente modificada e impressa ionicamente para pré-concentração seletiva on-line de íons cobre

The present work purposes the preparation of a silica gel sorbent organically modified with 2-aminoethyl-3-aminobutylmethyldimethoxysilane (AAMDMS) and imprinted with Cu2+ ions by means surface imprinting technique and its use for selective on-line sorbent preconcentration of Cu2+ ions with further UV-VIS spectrophotometric determination by flow injection analysis. The Cu2+-imprinted silica gel, when compared with non imprinted silica gel and silica gel, showed from the binary mixture of Cu2+/Ni2+ relative selectivity coefficient (k') of 6.84 and 5.43 and 6.64 and 19.83 for the mixture Cu2+/Pb2+, thus demonstrating higher selectivity of Cu2+-imprinted silica gel towards Cu2+ ions. Under optimized condition, the on-line preconcentration method provided detection limit of 3.4 μg L-1 and linear range ranging from 30.0 up to 300.0 μg L-1 (r = 0.995). The accuracy of method was successfully assessed by analyzing different kind of spiked water samples with recovery values ranging from 92.2 up to 103.0%.

Improvement of genistein content in solid genistein/-cyclodextrin complexes β

Genistein:β-cyclodextrin complexes with high drug loading (19.22%) were prepared by freeze-drying and characterized by differential scanning calorimetry and hydrogen nuclear magnetic resonance spectroscopy. The spatial configuration of the complex was proposed by means of 2D-NOESY experiment combined with molecular modeling. According to the results obtained, the interaction of genistein with β -cyclodextrin in a 1:1 complex is supposed to occur mainly through the insertion of the guest A-ring in cyclodextrin cavity, without rule out the possibility of inclusion through the B-ring, as previously reported in the literature.

Determinação de 2,5-hexanodiona em urina empregando cromatografia líquida de alta eficiência, após derivatização com 2,4-dinitrofenil-hidrazina

A method for quantifying urinary 2,5-hexanedione was optimized and validated. Urine samples were hydrolyzed and derivatized with 2,4-dinitrophenylhydrazine. The analyte was separated in a high performance liquid chromatography system with a diode array detector, using a C18 column (150 x 4.6 mm, p.d. 5 µm) and a mobile phase composed of phosphate buffer pH 2.3:acetonitrile (40:60, v/v), at a flow rate of 1 mL/min. The chromatograms were monitored at 334 nm. Retention time was 7.3 minutes. Main validation parameters were: coefficient of determination: 0.9994, accuracy: 96 to 107%; intra-assay precision (RSD): 3.08 to 6.72%; inter-assay precision (RSD): 2.54 to 8.17% and limit of quantitation of 0.19 µg/mL.

UM MÉTODO EFICIENTE PARA A OBTENÇÃO DE DERIVADOS DE 1-ALQUILAMINO-2,4-DINITROBENZENO E A REDUÇÃO REGIOSSELETIVA PARA A OBTENÇÃO DE DERIVADOS DE 1-ALQUILAMINO-2-AMINO-4-NITROBENZENO

Both primary and secondary amines react with 2,4-dinitrochlorobenzene to give derivatives of 1-alkylamino-2,4-dinitrobenzene. These compounds are important intermediates for the synthesis of a diverse range of products. The methodology reported in the present study involves either the room temperature reaction or heating at 70 °C in ethanol in the presence of triethylamine. This transformation occurs via a nucleophilic substitution reaction. The 1-alkylamino-2,4-dinitrobenzene derivatives were obtained in greater than 90% purified yield. The selective reduction of dinitro compounds is an important synthetic strategy for the synthesis of intermediates for dyes, pharmaceuticals and agrochemicals. The use of SnCl2 as a suspension in EtOAc is a promising method for the regio- and chemo-selective reduction of 1-alkylamino-2,4-dinitrobenzenes to 1-alkylamino-2-amino-4-nitrobenzenes. These products are useful intermediates in organic synthesis.

Use of modified silica gel for concentrating Pb (II) and Cd (II) occurring in form of complex anions

The performance of silica gel, modified by the impregnation with a high molecular weight quaternary amine (triethyl octadecyl ammonium iodide), used for the concentration of heavy metals occurring in water is studied. The material under study captures Cd, Pb, which are capable of forming stable complexes with I- ions.The results obtained about the metal capture, under dynamic conditions, are described and metal ions are removed by desorption with EDTA and quantified by AAS.

Thermal and spectral properties of di-and trimethoxybenzoates of silver (I)

The complexes of silver(I) with 2,3-, 2,4-, 2,6-, 3,4-, 3,5-dimethoxy-, and 2,3,4- and 3,4,5-trimethoxybenzoic acid anions have been synthesized and characterized by elemental analysis, IR spectroscopy, thermogravimetric and X-ray studies. Their solubility in water has been also determined at 293K. All analysed complexes were found to be crystalline, anhydrous compounds with low symmetry. The carboxylate groups act as bidentate or monodentate ligands. The thermal stability of compounds has been examined in air in temperature range of 293-1173K. The analysed complexes were found to be stable at room temperature and their solubilities in water at 293K to be in the order of 10-4 mol.dm-3.

Complexes of 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III)

The complexes of 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III) have been synthesized as polycrystalline hydrated solids, and characterized by elemental analysis, spectroscopy, magnetic studies and also by X-ray diffraction and thermogravimetric measurements. The analysed complexes have the following colours: violet for Nd(III), white for Gd(III) and cream for Ho(III) compounds. The carboxylate groups bind as bidentate chelating (Ho) or bridging ligands (Nd, Gd). On heating to 1173K in air the complexes decompose in several steps. At first, they dehydrate in one step to form anhydrous salts, that next decompose to the oxides of respective metals. The gaseous products of their thermal decomposition in nitrogen were also determined and the magnetic susceptibilites were measured over the temperature range of 76-303K and the magnetic moments were calculated. The results show that 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III) are high-spin complexes with weak ligand fields. The solubility value in water at 293K for analysed 4-chlorophenoxyacetates is in the order of 10-4mol/dm³.

On Glucose Metabolism in Patients with the m.3243A>G Mutation

Background: The m.3243A>G mutation in mitochondrial DNA is the most common cause for mitochondrial diabetes. In addition, unexpected deaths related to the m.3243A>G associate with encephalopathy and cardiomyopathy. Failing mitochondrial respiratory chain in neurons, myocytes and beta cells is considered to underlie the multiorgan manifestations of the m.3243A>G. Aims: The primary aim of the study was to characterize the organ-specific glucose metabolism in patients with m.3243A>G and secondly, to study patients with or without signs of diabetes, cardiomyopathy or encephalopathy. The insulin-stimulated glucose metabolism in brain, heart, skeletal muscle, adipose tissue and liver were measured with 2-deoxy-2-[18F]fluoro-α-D-glucose in 15 patients and 14 controls. Brain oxygen metabolism was assessed with [15O]oxygen and insulin secretion was modelled based on oral glucose tolerance test. Results: The glucose oxidation in brain was globally decreased in patients with or without clinical encephalopathy. The insulin-stimulated glucose influx to skeletal muscle and adipose tissue was decreased in patients with or without diabetes as the hepatic glucose metabolism was normal. Impaired beta cell function and myocardial glucose uptake were associated with the high m.3243A>G heteroplasmy. Conclusions: This cross-sectional study suggests that: 1) The ability of insulin to stimulate glucose metabolism in skeletal muscle and adipose tissue is weakened before the beta cell failure results in mitochondrial diabetes. 2) Glucose oxidation defect is detected in otherwise unaffected cerebral regions in patients with the m.3243A>G, thus it likely precedes the clinical encephalopathy. 3) Uneconomical glucose hypometabolism during hyperinsulinemia contributes to the cardiac vulnerability in patients with high m.3243A>G heteroplasmy

Detection of immunoglobulin G in the lung and liver of hamsters with visceral leishmaniasis

Several organs are affected in visceral leishmaniasis, not only those rich in mononuclear phagocytes. Hypergammaglobulinemia occurs during visceral leishmaniasis; anti-Leishmania antibodies are not primarily important for protection but might be involved in the pathogenesis of tissue lesions. The glomerulonephritis occurring in visceral leishmaniasis has been attributed to immune complex deposition but in other organs the mechanism has not been studied. In the current study we demonstrated the presence of IgG in the lung and liver of hamsters with visceral leishmaniasis. Hamsters were injected intraperitoneally with 2 x 10(7) amastigotes of Leishmania (Leishmania) chagasi and the presence of IgG in the liver and lung was evaluated at 7, 15, 30, 45, 80 and 102 days postinfection (PI) by immunohistochemistry. The parasite burden in the spleen and liver increased progressively during infection. We observed a deposit of IgG from day 7 PI that increased progressively until it reached highest intensity around 30 and 45 days PI, declining at later times. The IgG deposits outlined the sinusoids. In the lung a deposit of IgG was observed in the capillary walls that was moderate at day 7 PI, but the intensity increased remarkably at day 30 PI and declined at later times of infection. No significant C3 deposits were observed in the lung or in the liver. We conclude that IgG may participate in the pathogenesis of the inflammatory process of the lung and liver occurring in experimental visceral leishmaniasis and we discuss an alternative mechanism other than immune complex deposition.

Early prediction of poor outcome in patients with acute asthma in the emergency room

Early identification of patients who need hospitalization or patients who should be discharged would be helpful for the management of acute asthma in the emergency room. The objective of the present study was to examine the clinical and pulmonary functional measures used during the first hour of assessment of acute asthma in the emergency room in order to predict the outcome. We evaluated 88 patients. The inclusion criteria were age between 12 and 55 years, forced expiratory volume in the first second below 50% of predicted value, and no history of chronic disease or pregnancy. After baseline evaluation, all patients were treated with 2.5 mg albuterol delivered by nebulization every 20 min in the first hour and 60 mg of intravenous methylprednisolone. Patients were reevaluated after 60 min of treatment. Sixty-five patients (73.9%) were successfully treated and discharged from the emergency room (good responders), and 23 (26.1%) were hospitalized or were treated and discharged with relapse within 10 days (poor responders). A predictive index was developed: peak expiratory flow rates after 1 h <=0% of predicted values and accessory muscle use after 1 h. The index ranged from 0 to 2. An index of 1 or higher presented a sensitivity of 74.0, a specificity of 69.0, a positive predictive value of 46.0, and a negative predictive value of 88.0. It was possible to predict outcome in the first hour of management of acute asthma in the emergency room when the index score was 0 or 2.

Indirect effects of oral tolerance to ovalbumin interfere with the immune responses triggered by Schistosoma mansoni eggs

The objective of the present study was to investigate whether the injection of a tolerated protein (indirect effects) affects the formation of granulomas around Schistosoma mansoni eggs trapped in the lungs after intravenous (iv) injection into normal (noninfected) C57BL/6 mice (6 animals per group). To induce oral tolerance to chicken egg ovalbumin a 1/5 dilution of egg white in water was offered ad libitum in a drinking bottle for 3 days. Control mice received water. After 7 days, control and experimental animals were injected iv with 2,000 S. mansoni eggs through a tail vein. In some mice of both groups the iv injection of eggs was immediately followed by intraperitoneal (ip) immunization with 10 µg of dinitrophenylated conjugates of ovalbumin (DNP-Ova) emulsified in complete Freund's adjuvant (CFA) or only CFA; 18 days later, mice were bled and killed by ether inhalation. The lungs were fixed in formalin and embedded in paraffin. Serial sections of 5 µm were stained with Giemsa, Gomori's silver reticulin and Sirius red (pH 10.2). Granuloma diameters were measured in histological sections previously stained with Gomori's reticulin. Anti-DNP and anti-soluble egg antigen (SEA) antibodies were analyzed by ELISA. In mice orally tolerant to ovalbumin the concomitant ip injection of DNP-Ova resulted in significantly lower anti-SEA antibodies (ELISA*: 1395 ± 352 in non-tolerant and 462 ± 146 in tolerant mice) and affected granuloma formation around eggs, significantly decreasing granuloma size (area: 22,260 ± 2478 to 12,993 ± 3242 µm²). Active mechanisms triggered by injection of tolerated antigen (ovalbumin) reduce granuloma formation.

Lightweight, liquid-cooled, direct-drive generator for highpower wind turbines: motivation, concept, and performance

Thesis: A liquid-cooled, direct-drive, permanent-magnet, synchronous generator with helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit offers an excellent combination of attributes to reliably provide economic wind power for the coming generation of wind turbines with power ratings between 5 and 20MW. A generator based on the liquid-cooled architecture proposed here will be reliable and cost effective. Its smaller size and mass will reduce build, transport, and installation costs. Summary: Converting wind energy into electricity and transmitting it to an electrical power grid to supply consumers is a relatively new and rapidly developing method of electricity generation. In the most recent decade, the increase in wind energy’s share of overall energy production has been remarkable. Thousands of land-based and offshore wind turbines have been commissioned around the globe, and thousands more are being planned. The technologies have evolved rapidly and are continuing to evolve, and wind turbine sizes and power ratings are continually increasing. Many of the newer wind turbine designs feature drivetrains based on Direct-Drive, Permanent-Magnet, Synchronous Generators (DD-PMSGs). Being low-speed high-torque machines, the diameters of air-cooled DD-PMSGs become very large to generate higher levels of power. The largest direct-drive wind turbine generator in operation today, rated just below 8MW, is 12m in diameter and approximately 220 tonne. To generate higher powers, traditional DD-PMSGs would need to become extraordinarily large. A 15MW air-cooled direct-drive generator would be of colossal size and tremendous mass and no longer economically viable. One alternative to increasing diameter is instead to increase torque density. In a permanent magnet machine, this is best done by increasing the linear current density of the stator windings. However, greater linear current density results in more Joule heating, and the additional heat cannot be removed practically using a traditional air-cooling approach. Direct liquid cooling is more effective, and when applied directly to the stator windings, higher linear current densities can be sustained leading to substantial increases in torque density. The higher torque density, in turn, makes possible significant reductions in DD-PMSG size. Over the past five years, a multidisciplinary team of researchers has applied a holistic approach to explore the application of liquid cooling to permanent-magnet wind turbine generator design. The approach has considered wind energy markets and the economics of wind power, system reliability, electromagnetic behaviors and design, thermal design and performance, mechanical architecture and behaviors, and the performance modeling of installed wind turbines. This dissertation is based on seven publications that chronicle the work. The primary outcomes are the proposal of a novel generator architecture, a multidisciplinary set of analyses to predict the behaviors, and experimentation to demonstrate some of the key principles and validate the analyses. The proposed generator concept is a direct-drive, surface-magnet, synchronous generator with fractional-slot, duplex-helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit to accommodate liquid coolant flow. The novel liquid-cooling architecture is referred to as LC DD-PMSG. The first of the seven publications summarized in this dissertation discusses the technological and economic benefits and limitations of DD-PMSGs as applied to wind energy. The second publication addresses the long-term reliability of the proposed LC DD-PMSG design. Publication 3 examines the machine’s electromagnetic design, and Publication 4 introduces an optimization tool developed to quickly define basic machine parameters. The static and harmonic behaviors of the stator and rotor wheel structures are the subject of Publication 5. And finally, Publications 6 and 7 examine steady-state and transient thermal behaviors. There have been a number of ancillary concrete outcomes associated with the work including the following. X Intellectual Property (IP) for direct liquid cooling of stator windings via an embedded coaxial coolant conduit, IP for a lightweight wheel structure for lowspeed, high-torque electrical machinery, and IP for numerous other details of the LC DD-PMSG design X Analytical demonstrations of the equivalent reliability of the LC DD-PMSG; validated electromagnetic, thermal, structural, and dynamic prediction models; and an analytical demonstration of the superior partial load efficiency and annual energy output of an LC DD-PMSG design X A set of LC DD-PMSG design guidelines and an analytical tool to establish optimal geometries quickly and early on X Proposed 8 MW LC DD-PMSG concepts for both inner and outer rotor configurations Furthermore, three technologies introduced could be relevant across a broader spectrum of applications. 1) The cost optimization methodology developed as part of this work could be further improved to produce a simple tool to establish base geometries for various electromagnetic machine types. 2) The layered sheet-steel element construction technology used for the LC DD-PMSG stator and rotor wheel structures has potential for a wide range of applications. And finally, 3) the direct liquid-cooling technology could be beneficial in higher speed electromotive applications such as vehicular electric drives.