Some common defects in prawn processing: their sources and remedies

The processing of prawns has assumed very great importance in India because processed prawn products have become one of the most important foreign exchange earners in the country.

Studies on the possible sources of microbial contaminations of processed fishery products

An attempt has been made in the present study to estimate and describe in detail the nature and extent of contamination of processed fishery products. In large scale prawn processing when the preprocess preparation is elaborate, the industry in India has found it advantageous to establish the primary processing centers away from the processing factories. The data collected have clearly indicated that if such processing centers are not properly organized there is a possibility of greater contamination of the products at this stage. The data collected during the course of this investigation have given the basis for the measures to be taken for the maintenance of bacterial quality of prawn during different stages of processing.

Binding of radio-iodinated gonadotropin to the ovary of exotic carp (Cyprinus carpio Lin.)

Heterologous murrel gonadotropic hormone (m-GtH) binds to common carp oocyte plasma membrane and enhances steroid secretion. With increasing concentration of radio-labelled hormone the receptor binding is also found to increase linearly up to a certain concentration and then decrease. The [¹²⁵I] murrel GtH binding characteristics to a preparation of common carp ovarian plasma membrane shows saturability with high affinity. Scat chard plot analysis gave dissociation constant (Kd) of 0.81 X 10(super -9) M and maximum binding capacity (MBC) of 22.05 f mole/mg protein.

Effects of pedestal suppression on gain-switched laser sources for 40 Gbit/s OTDM transmission

The performance of 40 Gbit/s optical time-division multiplexed (OTDM) communication systems can be severely limited when the extinction ratio of the optical pulses is low. This is a consequence of the coherent interference noise between individual OTDM channels. When taken alone, the multiple quantum well-distributed feedback laser+dispersion compensating fiber source exhibits a relatively poor extinction ratio which impairs its potential for use in a 40 Gbit/s OTDM system. However, with the addition of an electroabsorption modulator to suppress the pulse pedestals to better than 30 dB extinction, coherent interference noise is reduced, the bit-error-rate performance is greatly improved, and the source shows good potential for 40 Gbit/s OTDM communication.

Process development on the monolithic fabrication of an ultra-compact 4×4 optical switch matrix on InP/InGaAsP material

We have fabricated an ultra-compact 4×4 optical matrix on InP/InGaAsP material. 1×4 MMI couplers and TIR mirrors are employed to produce a compact 1×2 mm2 device. A CH4/H2/O2 RIE dry etch process has been used to realize two-level dry etching: deep-etch for both the MMI couplers and the mirrors and shallow-etch for the rest of the routing waveguides. It was found that a metal/dielectric bilayer mask is essential for multi-dry-etch processes and high profile verticality. We have found a Ti intermediate mask for the deep-etch process which is removable by SF6 dry-etch before the following shallow process. Dry-etch removal of the intermediate mask is necessary to protect the deep-etched mirror sidewall.

Influence of voltage and frequency dimming on power losses in HF electronic ballasts for compact fluorescent lamps

Compact Fluorescent Lamps (CFL) incorporating electronic ballasts are widely used in lighting. In many cases the ability to dim the lamp is a requirement Dimming can be achieved by varying the voltage supplied to the inverter or by changing the switching frequency of the inverter. The effect of dimming by both approaches on the power losses in the inverter is studied in this work. The lamp and associated inverter has been modeled in PSPICE, using a behavioral model for the CFL. Predicted losses are in good agreement with experimental data obtained from calorimetry. The model was then used to determine the distribution of losses within the inverter, enabling a comparison of the effects of the two dimming methods to be made. © 2006 IEEE.

Losses in inductor-less piezoelectric transformer ballast for compact fluorescent lamps

In this study an inductor-less piezoelectric transformer (PT) based ballast for a 5 W CFL has been designed and simulated. The predictions of circuit currents and losses closely match experimentally measured values. The total simulated loss figure was confirmed against practically determined losses using a precision mini-calorimeter. Using simulation to disaggregate the total loss figure, it is seen that the PT makes the largest contribution to the total losses in such ballast.