Theoretical results of QoS-guaranteed resource scaling for cloud-based MapReduce

Quality of Service (QoS) is a new issue in cloud-based MapReduce, which is a popular computation model for parallel and distributed processing of big data. QoS guarantee is challenging in a dynamical computation environment due to the fact that a fixed resource allocation may become under-provisioning, which leads to QoS violation, or over-provisioning, which increases unnecessary resource cost. This requires runtime resource scaling to adapt environmental changes for QoS guarantee. Aiming to guarantee the QoS, which is referred as to hard deadline in this work, this paper develops a theory to determine how and when resource is scaled up/down for cloud-based MapReduce. The theory employs a nonlinear transformation to define the problem in a reverse resource space, simplifying the theoretical analysis significantly. Then, theoretical results are presented in three theorems on sufficient conditions for guaranteeing the QoS of cloud-based MapReduce. The superiority and applications of the theory are demonstrated through case studies.

Comparison of three pollination methods for Eucalyptus argophloia, a small-flowered eucalypt

Context Most studies assess pollination success at capsule maturity, and studies of pre-zygotic processes are often lacking. Aims This study investigates the suitability of controlled pollination for a potential forestry plantation species, Eucalyptus argophloia, by examining pre- and post-zygotic pollination success. Methods Pollen tube development, capsule set and seed set are compared following three-stop pollination, artificially induced protogyny (AIP), AIP unpollinated and open pollination. The fecundity of stored pollen was compared with that of fresh pollen. Results Three-stop pollination, AIP and open pollination had similar numbers of pollen tubes, but AIP unpollinated had none. Open pollination produced significantly more capsules and total number of seeds than the other treatments. There were significantly more seeds per retained capsule for the open pollination and three-stop pollination treatments than for the AIP and AIP unpollinated pollination treatments. There were no significant differences relative to the age of pollen. Conclusions Pre-zygotic success in terms of pollen tubes was similar for open-pollinated, three stop and AIP, but was not reflected in post-zygotic success when the open pollination and three-stop method produced significantly more seeds per retained capsule than the AIP treatments and open pollination yielded more seeds. Capsule set and total seed set for open pollination, and fewer capsules in controlled pollinations, may reflect physical damage to buds because of the small E. argophloia flowers. Suitable alternative breeding strategies other than controlled pollinations are discussed for this species.

Three new species of Tilletia on Eriachne from north-western Australia

Three new species of Tilletia are described from species of Eriachne (Poaceae) in the arid tropics of north-western Australia. In Western Australia, T. mactaggartii sp. nov. infects E. burkittii, and T. geeringii sp. nov. infects E. festucacea. Tilletia marjaniae sp. nov. infects E. pulchella subsp. dominii in Western Australia and the Northern Territory. These species are the first records of Tilletia on Eriachne. Phylogenetic relationships of these species were inferred from internal transcribed spacer of ribosomal RNA region and large subunit ribosomal RNA gene sequences.

The host range of three biotypes of Dactylopius tomentosus (Lamarck) (Hemiptera: Dactylopiidae) and their potential as biological control agents of Cylindropuntia spp. (Cactaceae) in Australia

The host range of two newly imported biotypes of Dactylopius tomentosus and their potential as biological control agents of Cylindropuntia spp. were investigated. A third biotype (imbricata) of D. tomentosus previously released in Australia to control C. imbricata was also screened to determine if it will feed on other species of Cylindropuntia occurring in Australia. Efficacy trials were conducted to evaluate the ability of the biotypes to retard the growth or kill those plant species supporting development of four or more individuals in the host test trials. The host range of the three biotypes of D. tomentosus was restricted to the genus Cylindropuntia. However, the biotypes showed varying degrees of specificity within this genus. The imbricata biotype was the only biotype to develop on Australian C. rosea provenances, albeit with a range of developmental success on all C. rosea provenances tested. The Spanish provenance supported the highest development success followed by Grawin (NSW), Lorne Station (NSW) while the least preferred was the Mexican provenance. The rosea and cholla biotypes were unsuitable candidates to control C. rosea in Australia. However, the efficacy trials showed that the cholla biotype had a high impact on four of the eight naturalised Cylindropuntia species in Australia. This biotype established rapidly and the sustained feeding of one fecund female and her progeny killed potted plants of C. imbricata and C. fulgida at week 18. This biotype has the potential to be an effective agent against C. fulgida, C. imbricata, C. kleiniae and C. tunicata and, as a consequence, an application seeking its release in Australia has been lodged.

Determination of the optically equivalent model in three-dimensional photoelasticity

Any stressed photoelastic medium can be reduced to an optically equivalent model consisting of a linear retarder, with retardation 1 and principal axis at azimuth 1, and a pure rotator of power 2. The paper describes two simple methods to determine these quantities experimentally. Further, a method is described to overcome the problem of rotational effects in scattered-light investigations. This new method makes use of the experimentally determined characteristic parameters

School policies on bullying and cyberbullying: Perspectives across three Australian states

Background Despite decades of research, bullying in all its forms is still a significant problem within schools in Australia, as it is internationally. Anti-bullying policies and guidelines are thought to be one strategy as part of a whole school approach to reduce bullying. However, although Australian schools are required to have these policies, their effectiveness is not clear. As policies and guidelines about bullying and cyberbullying are developed within education departments, this paper explores the perspectives of those who are involved in their construction. Purpose This study examined the perspectives of professionals involved in policy construction, across three different Australian states. The aim was to determine how their relative jurisdictions define bullying and cyberbullying, the processes for developing policy, the bullying prevention and intervention recommendations given to schools and the content considered essential in current policies. Sample Eleven key stakeholders from three Australian states with similar education systems were invited to participate. The sample selection criteria included professionals with experience and training in education, cyber-safety and the responsibility to contribute to or make decisions which inform policy in this area for schools in their state. Design and methods Participants were interviewed about the definitions of bullying they used in their state policy frameworks; the extent to which cyberbullying was included; and the content they considered essential for schools to include in anti-bullying policies. Data were collected through in-depth, semi-structured interviews and analysed thematically. Findings Seven themes were identified in the data: - (1) Definition of bullying and cyberbullying; - (2) Existence of a policy template; - (3) Policy location; - (4) Adding cyberbullying; - (5) Distinguishing between bullying and cyberbullying; - (6) Effective policy, and; - (7) Policy as a prevention or intervention tool. The results were similar both across state boundaries and also across different disciplines. Conclusion Analysis of the data suggested that, across the themes, there was some lack of information about bullying and cyberbullying. This limitation could affect the subsequent development, dissemination and sustainability of school anti-bullying policies, which have implications for the translation of research to inform better student outcomes.

Sequence diversity and differential expression of major phenylpropanoid-flavonoid biosynthetic genes among three mango varieties

Background: Mango fruits contain a broad spectrum of phenolic compounds which impart potential health benefits; their biosynthesis is catalysed by enzymes in the phenylpropanoid-flavonoid (PF) pathway. The aim of this study was to reveal the variability in genes involved in the PF pathway in three different mango varieties Mangifera indica L., a member of the family Anacardiaceae: Kensington Pride (KP), Irwin (IW) and Nam Doc Mai (NDM) and to determine associations with gene expression and mango flavonoid profiles. Results: A close evolutionary relationship between mango genes and those from the woody species poplar of the Salicaceae family (Populus trichocarpa) and grape of the Vitaceae family (Vitis vinifera), was revealed through phylogenetic analysis of PF pathway genes. We discovered 145 SNPs in total within coding sequences with an average frequency of one SNP every 316bp. Variety IW had the highest SNP frequency (one SNP every 258bp) while KP and NDM had similar frequencies (one SNP every 369bp and 360bp, respectively). The position in the PF pathway appeared to influence the extent of genetic diversity of the encoded enzymes. The entry point enzymes phenylalanine lyase (PAL), cinnamate 4-mono-oxygenase (C4H) and chalcone synthase (CHS) had low levels of SNP diversity in their coding sequences, whereas anthocyanidin reductase (ANR) showed the highest SNP frequency followed by flavonoid 3'-hydroxylase (F3'H). Quantitative PCR revealed characteristic patterns of gene expression that differed between mango peel and flesh, and between varieties. Conclusions: The combination of mango expressed sequence tags and availability of well-established reference PF biosynthetic genes from other plant species allowed the identification of coding sequences of genes that may lead to the formation of important flavonoid compounds in mango fruits and facilitated characterisation of single nucleotide polymorphisms between varieties. We discovered an association between the extent of sequence variation and position in the pathway for up-stream genes. The high expression of PAL, C4H and CHS genes in mango peel compared to flesh is associated with high amounts of total phenolic contents in peels, which suggest that these genes have an influence on total flavonoid levels in mango fruit peel and flesh. In addition, the particularly high expression levels of ANR in KP and NDM peels compared to IW peel and the significant accumulation of its product epicatechin gallate (ECG) in those extracts reflects the rate-limiting role of ANR on ECG biosynthesis in mango. © 2015 Hoang et al.

Three-dimensional corner reflector of arbitrary apex angle

A method of analysing a 3-dimensional corner reflector antenna of arbitrary apex angle is given. Expressions have been obtained for the far field of the 3-dimensional corner reflector fed by a dipole. The radiation resistance and the directive gain of the antenna have been calculated. The method described is applicable even when the feed dipole is arbitrarily oriented. It is found that the radiation along a prescribed direction can be circularly polarised (right or left) by suitably orienting the feed dipole.

Drug discovery approaches utilizing three-dimensional cell culture

Historically, two-dimensional (2D) cell culture has been the preferred method of producing disease models in vitro. Recently, there has been a move away from 2D culture in favor of generating three-dimensional (3D) multicellular structures, which are thought to be more representative of the in vivo environment. This transition has brought with it an influx of technologies capable of producing these structures in various ways. However, it is becoming evident that many of these technologies do not perform well in automated in vitro drug discovery units. We believe that this is a result of their incompatibility with high-throughput screening (HTS). In this study, we review a number of technologies, which are currently available for producing in vitro 3D disease models. We assess their amenability with high-content screening and HTS and highlight our own work in attempting to address many of the practical problems that are hampering the successful deployment of 3D cell systems in mainstream research.

The conformation of (μ-butatriene)hexacarbonyldiiron complex from proton NMR studies in three nematic phases

Proton NMR spectroscopy in three different liquid crystals has been used to determine two conformational angles of (μ-butatriene)hexacarbonyldiiron complex, namely the angle between the two CH2 planes and the dihedral angle between the two planes containing four carbon atoms of the butatriene moiety. The values are 44 and 46°, respectively. The direct and the indirect geminal HH couplings are shown to be of the same sign in the liquid crystals with positive diamagnetic anisotropy.

Using Big Data to manage safety-related risk in the upstream oil and gas industry: A research agenda

Despite considerable effort and a broad range of new approaches to safety management over the years, the upstream oil & gas industry has been frustrated by the sector’s stubbornly high rate of injuries and fatalities. This short communication points out, however, that the industry may be in a position to make considerable progress by applying “Big Data” analytical tools to the large volumes of safety-related data that have been collected by these organizations. Toward making this case, we examine existing safety-related information management practices in the upstream oil & gas industry, and specifically note that data in this sector often tends to be highly customized, difficult to analyze using conventional quantitative tools, and frequently ignored. We then contend that the application of new Big Data kinds of analytical techniques could potentially reveal patterns and trends that have been hidden or unknown thus far, and argue that these tools could help the upstream oil & gas sector to improve its injury and fatality statistics. Finally, we offer a research agenda toward accelerating the rate at which Big Data and new analytical capabilities could play a material role in helping the industry to improve its health and safety performance.

Identification of I-7 expands the repertoire of genes for resistance to Fusarium wilt in tomato to three resistance gene classes

The tomato I-3 and I-7 genes confer resistance to Fusarium oxysporum f. sp. lycopersici (Fol) race 3 and were introgressed into the cultivated tomato, Solanum lycopersicum, from the wild relative Solanum pennellii. I-3 has been identified previously on chromosome 7 and encodes an S-receptor-like kinase, but little is known about I-7. Molecular markers have been developed for the marker-assisted breeding of I-3, but none are available for I-7. We used an RNA-seq and single nucleotide polymorphism (SNP) analysis approach to map I-7 to a small introgression of S. pennellii DNA (c. 210 kb) on chromosome 8, and identified I-7 as a gene encoding a leucine-rich repeat receptor-like protein (LRR-RLP), thereby expanding the repertoire of resistance protein classes conferring resistance to Fol. Using an eds1 mutant of tomato, we showed that I-7, like many other LRR-RLPs conferring pathogen resistance in tomato, is EDS1 (Enhanced Disease Susceptibility 1) dependent. Using transgenic tomato plants carrying only the I-7 gene for Fol resistance, we found that I-7 also confers resistance to Fol races 1 and 2. Given that Fol race 1 carries Avr1, resistance to Fol race 1 indicates that I-7-mediated resistance, unlike I-2- or I-3-mediated resistance, is not suppressed by Avr1. This suggests that Avr1 is not a general suppressor of Fol resistance in tomato, leading us to hypothesize that Avr1 may be acting against an EDS1-independent pathway for resistance activation. The identification of I-7 has allowed us to develop molecular markers for marker-assisted breeding of both genes currently known to confer Fol race 3 resistance (I-3 and I-7). Given that I-7-mediated resistance is not suppressed by Avr1, I-7 may be a useful addition to I-3 in the tomato breeder's toolbox.

Three-component assembly of a metal-inorganic 3D Co(II) polymer containing bridging hydrazine

Three-component metal-inorganic assembly of a Co(II) network representing the first example of a 3D coordination polymer containing a hydrazine bridging ligand, has been synthesized and characterized.