EFFECT OF MOLECULAR-WEIGHT OF PMMA ON BETA PHASE CRYSTALLIZATION IN HIGHLY ORIENTED PVF2 FILMS

Polyvinylidene fluoride (PVF_2) exhibits at least four crystalline phases (α, β, γ, and δ). Among them, β phase is the most important one because it is directly related to the piezoand pyro-electric activities of PVF_2. In recent years, more attention has been paid to the β

EFFECT OF CRYSTAL-FIELD AND BONDING PROPERTIES ON SPECTRAL STRUCTURE OF EU-2+

Five Eu~(2+)-doped simple fluorides and six Eu~(2+)-doped complex fluorides are synthesized by solid reactions. The strength of the crystal-field at the sites of Eu~(2+) ion, and the degroe of covalenco of Eu—F bond in these hosts are discussed. The f-f transition emission of Eu~(2+) ion is observed in the hosts which has lower coordination number and strong crystal-field. The f-f transition emission of Eu~(2+) ion is observed for the first time in the simple fluoride AlF_3.

STUDY ON ION-IMPLANTATION OF EUROPIUM INTO CAF2 SINGLE-CRYSTAL

CaF_2 single crystal is very useful as optical host materials. It has been systematically studied and widely used in thermoluminescence that rare earth ions were doped into CaF_2 single crystal with chemical methods. However, the ion implan-

Studies on the hemolytic activity of tentacle extracts of jellyfish Rhopilema esculentum Kishinouye: Application of orthogonal test

The present work is first reporting the hemolytic activity of venom from jellyfish Rhopilema esculentum Kishinouye extracted by different phosphate buffer solutions and incubated at different temperature according to the orthogonal test L6(1) x 3(6). Of the seven controllable independent variables, incubated temperature and phenylmethylsulfonyl fluoride (PMSF) had strongest effect on the hemolytic activity. (c) 2006 Elsevier B.V. All rights reserved.

基于PVDF的亚μN微力传感器的研究

本文设计了一种新颖的微力感知传感器及其标定方法,以获得亚μN(micro Newton)的可靠的、高精度力反馈信息。可靠的、高精度的微力感知和控制在提高微装配的效率上具有重要的作用。目前微装配中还没有可靠的亚μN分辨率的传感器。本文以PVDF(polyvinylidene fluoride)为基本材料,建立出PVDF传感器所受的微力与输出电压之间的关系模型,开发出相应的信号处理电路,并对PVDF传感器的上述模型进行了标定。实验结果表明本文开发的PVDF传感器具有亚μN的分辨率,同时验证了本文建立的PVDF传感器模型的正确性,并证明了信号处理电路以及标定方法是有效的。本文设计的微力传感器为微装配和微操作中微接触力的反馈控制提供了可靠的解决方法,并将促进微装配和微操作的自动化加工技术水平,实现微型装备的可靠、高产量的批量制造。

氟代谢平衡及其在地方性氟中毒防治中的应用研究

本文通过氟代谢平衡法，研究了大鼠在不同氟摄入量条件下以及食物高钙、高蛋白质、酸性饮水、碱性饮水，大鼠氟的摄入、排泄和蓄积的特征；并对氟代谢的指标之一，尿氟含量在地方性氟中毒防治中的应用进行了分析；同时，以大鼠氟代谢作为低氟玉米样品氟富集的载体，采用生物富集方法，探索性测定了测定超低氟含量玉米样品。通过实验观察，得到以下几点主要认识： 1. 氟的蓄积量从高到低的次序是：常规食料组＞碱性饮水组＞酸性饮水组＞富蛋白饲料组＞富钙饲料组。高钙和高蛋白饮食减少了大鼠的饮水量和摄食量，使高氟含量的饮水和食物进入机体的量减少，从而减少了摄氟量。高钙食物和高蛋白质食物，促使尿氟浓度显著增高，骨氟浓度减低，降低了大鼠的氟蓄积。高钙食物使粪排氟量比例增加，高蛋白食物使尿排氟量比例增加。 2. 大鼠生长过程中，一般在3个月时代谢旺盛，摄氟量、蓄积量和排氟量大幅增加。 3. 大鼠摄入过量氟导致骨形态学改变。随着实验时间加长，大鼠摄氟量增加，电镜下骨细胞出现凋亡和坏死数量增多，有的成骨细胞出现细胞器变性，骨基质发育不良；骺板仅见软骨细胞减少，未见细胞器变性，软骨基质未见异常。 4. 人群群体尿氟，对于氟中毒评价病情、环境氟暴露有重要意义，在地方性氟中毒防治工作中是一个可用于实际工作的指标。判定病区与非病区表准的人群尿氟几何均数为：成人1.6mg/L，儿童1.4mg/L。 5. 利用大鼠氟代谢平衡法测得新鲜玉米氟含量为：0.35mg/kg，其范围可能在0.01~0.69mg/kg之间，此方面还需进一步研究。

花岗岩-LiF-NaF-H_2O体系液相不混溶的实验研究

Liquid segregation phenomena have been found and explained in the F(Li)-rich granites in south China by Wang Linakui et al. (1979; 1983). A number of experimental investigations into the liquid immiscibilities in the granites systems have been carried out (Anfilogov et al., 1983; Glyuk et al., 1971; Glyuk et al., 1973a; 1973b; kovalenko, 1978; Wang Liangkui et al., 1987). Nevertheless, the detailed scenarios of the liquid immiscibilities in the granitic magmas are much less understood. This experimental study is amide to get access to this problem. Starting materials are biotite granite +LiF(3-10%)+NaF(3-10%)+H_2O(30%). The experimental results have shown that the liquid immiscibilities of melts of different compositions occur at 1 kbar and 840 ℃ when 5wt% (LiF + NaF) are added to the granite samples. three kinds of glasses indicating of three types of coexisting immiscible melts have been observed: light blue matrix glass, melanocratic glass balls and leucocratic glass balls. It is interesting that we have observed various kinds of textures as follows: spherulitic texture, droplets, flow bands, swirls. All these textures can be comparable to those in the natural granitic bodies. Electron microprobe data suggest that these different kinds of glasses are of different chemical compositions respectively; matrix glasses are F-poor silicate melts; melanocratic balls correspond to F-rich silicate melts; and leucocratic balls are the melts consisting mainly of fluorides. Raman spectrometric data have indicated that different glasses have different melt structures. TFM Diagrams at 1000 * 10~5 Pa have been plotted, in which two miscible gaps are found. One of the two gaps corresponds to the immiscibility between F - poor silicate melt and F-rich silicate melt, another to that between the silicate melt and fluoride melt. The experiments at different pressures have suggested that the decreases in pressures are favorable to the liquid immiscibility. Several reversal experiments have indicated that the equilibria in different runs have been achieved. We have applied the experimental results to explain the field evidence of immiscibilities in some of granites associated with W-Sn-Nb-Ta mineralization. These field phenomena include flow structure, globular structures,mineralized globular patche and glass inclusions in topaz. We believe that the liquid immiscibility (liquid segregation) is a possible way of generation of F(Li)-rich granites. During the evolution of the granitic magmas, the contents of Li, F, H_2O and ore-forming elements in the magmas become higher and higher. The granites formed in the extensional tectonic settings commonly bear higher abundences of the above-mentioned elements. the pressures of the granitic magmas are relatively lower during the processes of their emplacements and cooling. The late-staged magmas will produce liquid immiscibilities, leading to the production of several coexisting immiscible melts with different chemical compositions. The flow of immiscible consisting magmas will produce F(Li)-rich granites. It is also considered that liquid immiscibilities are of great significance in the production of rare metal granites. The ore-forming processes and magmatic crystallization and metasomatic processes can be occur at the same time. The mineralisations of rare metals are related to both magmatic and hydrothermal processes.

Direct synthesis and characterization of titanium-substituted mesoporous molecular sieve SBA-15

Ti-substituted mesoporous SBA-15 (Ti-SBA-15) materials have been synthesized by using a new approach in which the hydrolysis of the silicon precursor (tetramethoxysilane, TMOS) is accelerated by fluoride. These materials were characterized by powder X-ray diffraction patterns (XRD), X-ray fluorescence spectroscopy (Y-RF), N-2 sorption isotherms, diffuse-reflectance UV-visible (UV-vis) and UV-Raman spectroscopy, Si-29 MAS NMR, and the catalytic epoxidation reaction of styrene. Experiments show that Ti-SBA-15 samples of high quality can be obtained under the following conditions: F/Si greater than or equal to 0.03 (molar ratio), pH less than or equal to 1.0, aging temperature less than or equal to 80 degreesC, and Ti/Si less than or equal to 0.01. It was found that the hydrolysis rate of TMOS was remarkably accelerated by fluoride, which was suggested to play the main role in the formation of Ti-SBA-15 materials of high quality. There is no stoichiometric incorporation of Ti, and the Ti contents that are obtained are quite low in the case of the approach that is proposed. The calcined Ti-SBA-15 materials show highly catalytic activity in the epoxidation of styrene.

Highly ordered periodic mesoporous ethanesilica synthesized under neutral conditions

Highly ordered mesoporous ethanesilica (MES) with 2D hexagonal structure was synthesized from 1,2-bis(trimethoxysilyl) ethane under neutral conditions for the first time. Divalent salts, such as NiCl2, MgCl2, ZnCl2, ZnSO4 and Zn(NO3)(2), were used to help the formation of the ordered mesostructure. The MES samples were characterized by powder X-ray diffraction, nitrogen sorption, transmission electron microscopy, FT-IR, C-13 and Si-29 solid-state NMR and thermal gravimetric analysis. A phase transition from a disordered wormhole-like structure to an ordered P6mm structure was observed upon the addition of inorganic salts. The pore size of the MES decreases from 4.7 to 3.9 nm with increasing content of the inorganic salts. Fluoride was also found to be important for the formation of ordered MES under neutral conditions.

Vacinas Anticárie

Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Ciências Farmacêuticas

Ionómero de vidro vs. resina composta em odontopediatria

Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Medicina Dentária

In vivo inhibition of elevated myocardial beta-adrenergic receptor kinase activity in hybrid transgenic mice restores normal beta-adrenergic signaling and function.

BACKGROUND: The clinical syndrome of heart failure (HF) is characterized by an impaired cardiac beta-adrenergic receptor (betaAR) system, which is critical in the regulation of myocardial function. Expression of the betaAR kinase (betaARK1), which phosphorylates and uncouples betaARs, is elevated in human HF; this likely contributes to the abnormal betaAR responsiveness that occurs with beta-agonist administration. We previously showed that transgenic mice with increased myocardial betaARK1 expression had impaired cardiac function in vivo and that inhibiting endogenous betaARK1 activity in the heart led to enhanced myocardial function. METHODS AND RESULTS: We created hybrid transgenic mice with cardiac-specific concomitant overexpression of both betaARK1 and an inhibitor of betaARK1 activity to study the feasibility and functional consequences of the inhibition of elevated betaARK1 activity similar to that present in human HF. Transgenic mice with myocardial overexpression of betaARK1 (3 to 5-fold) have a blunted in vivo contractile response to isoproterenol when compared with non-transgenic control mice. In the hybrid transgenic mice, although myocardial betaARK1 levels remained elevated due to transgene expression, in vitro betaARK1 activity returned to control levels and the percentage of betaARs in the high-affinity state increased to normal wild-type levels. Furthermore, the in vivo left ventricular contractile response to betaAR stimulation was restored to normal in the hybrid double-transgenic mice. CONCLUSIONS: Novel hybrid transgenic mice can be created with concomitant cardiac-specific overexpression of 2 independent transgenes with opposing actions. Elevated myocardial betaARK1 in transgenic mouse hearts (to levels seen in human HF) can be inhibited in vivo by a peptide that can prevent agonist-stimulated desensitization of cardiac betaARs. This may represent a novel strategy to improve myocardial function in the setting of compromised heart function.

Atherosclerosis: Viewing the problem from a different perspective including possible treatment options

This paper proposes that atherosclerosis is initiated by a signaling event that deposits calcium hydroxyapatite (Ca-HAP). This event is preceded by a loss of mechanical structure in the arterial wall. After Ca-HAP has been deposited, it is unlikely that it will be reabsorbed because the solubility product constant (K sp) is very small, and the large stores of Ca +2 and PO 4-3 in the bones oppose any attempts to dissolve Ca-HAP by decreasing the common ions. The hydroxide ion (OH -) of Ca-HAP can be displaced in nature by fluoride (F -) and carbonate (CO 3-2) ions, and it is proposed that anions associated with cholesterol ester hydrolysis and, in very small quantities, the enolate of 7-ketocholesterol could also displace the OH -of Ca-HAP, forming an ionic bond. The free energy of hydration of Ca-HAP at 310 K is most likely negative, and the ionic radii of the anions associated with the hydrolysis of cholesterol ester are compatible with the substitution. Furthermore, examination of the pathology of atherosclerotic lesions by Raman and NMR spectroscopy and confocal microscopy supports deposition of Ca-HAP associated with cholesterol. Investigating the affinity of intermediates of cholesterol hydrolysis for Ca-HAP compared to lipoproteins such as HDL, LDL, and VLDL using isothermic titration calorimetry could add proof of this concept and may lead to the development of a new class of medications targeted at the deposition of cholesterol within Ca-HAP. Treatment of acute ischemic events as a consequence of atherosclerosis with denitrogenation and oxygenation is discussed. © the author(s), publisher and licensee Libertas Academica Ltd.

Dust in the wind: How climate variables and volcanic dust affect rates of tooth wear in Central American howling monkeys.

OBJECTIVES: Two factors have been considered important contributors to tooth wear: dietary abrasives in plant foods themselves and mineral particles adhering to ingested food. Each factor limits the functional life of teeth. Cross-population studies of wear rates in a single species living in different habitats may point to the relative contributions of each factor. MATERIALS AND METHODS: We examine macroscopic dental wear in populations of Alouatta palliata (Gray, 1849) from Costa Rica (115 specimens), Panama (19), and Nicaragua (56). The sites differ in mean annual precipitation, with the Panamanian sites receiving more than twice the precipitation of those in Costa Rica or Nicaragua (∼3,500 mm vs. ∼1,500 mm). Additionally, many of the Nicaraguan specimens were collected downwind of active plinian volcanoes. Molar wear is expressed as the ratio of exposed dentin area to tooth area; premolar wear was scored using a ranking system. RESULTS: Despite substantial variation in environmental variables and the added presence of ash in some environments, molar wear rates do not differ significantly among the populations. Premolar wear, however, is greater in individuals collected downwind from active volcanoes compared with those living in environments that did not experience ash-fall. DISCUSSION: Volcanic ash seems to be an important contributor to anterior tooth wear but less so in molar wear. That wear is not found uniformly across the tooth row may be related to malformation in the premolars due to fluorosis. A surge of fluoride accompanying the volcanic ash may differentially affect the premolars as the molars fully mineralize early in the life of Alouatta.

Review paper: role of aluminum in glass-ionomer dental cements and its biological effects

The role of aluminum in glass-ionomers and resin-modified glass-ionomers for dentistry is reviewed. Aluminum is included in the glass component of these materials in the form of Al(2)O(3) to confer basicity on the glass and enable the glass to take part in the acid-base setting reactions. Results of studies of these reactions by FTIR and magic-angle spinning (MAS)-NMR spectroscopy are reported and the role of aluminum is discussed in detail. Aluminum has been shown to be present in the glasses in predominantly 4-coordination, as well as 5- and 6-coordination, and during setting a proportion of this is converted to 6-coordinate species within the matrix of the cement. Despite this, mature cements may contain detectable amounts of both 4- and 5-coordinate aluminum. Aluminum has been found to be leached from glass-ionomer cements, with greater amounts being released under acidic conditions. It may be associated with fluoride, with which it is known to complex strongly. Aluminum that enters the body via the gastro-intestinal tract is mainly excreted, and only about 1% ingested aluminum crosses the gut wall. Calculation shows that, if a glass-ionomer filling dissolved completely over 5 years, it would add only an extra 0.5% of the recommended maximum intake of aluminum to an adult patient. This leads to the conclusion that the release of aluminum from either type of glass-ionomer cement in the mouth poses a negligible health hazard.