Sexual Reproduction and Early Development in the Estuarine Sea Anemone, Nematostella vectensis Stephenson, 1935

This dissertation: 1) determines the factor(s) responsible for spawning induction in NematosteJla vectensis; 2) isolates, describes, and documents the source of jelly from egg masses of N. vectensis; and 3) describes N. vectensis' early development. Namatostella vectensis were maintained on a 7-day mussel feeding/water change regime over 159 days. Within 36 hours of mussel feeding/water change. 69.1% of females and 78.5% of males spawned reliably. Through manipulation of feeding, water change, oxygen and nitrogenous waste concentrations, spawning induction was found to be triggered by the oxygen concentration associated with water change, and not by feeding. Ammonia, anemones' major waste product, inhibited this induction in a concentration-dependent manner. Female N. vectensis release eggs in a persistent jellied egg mass which is unique among the Actiniaria. The major component of this egg mass jelly was a positive periodic acid-Schiffs staining, 39.5-40.5 kD glycoprotein. Antibodies developed in rabbits against this glycoprotein bound to jelly of intact egg masses and to granules (~ 2.8 IJm in diameter) present in female anemone mesenteries and their associated filaments. Antibodies did not label male tissues. Nematostella vecfensis embryos underwent first karyokinesis -60 minutes following the addition of sperm to eggs. Second nuclear division took place, followed by first cleavage, 90-120 minutes later. Each of the 4 blastomeres that resulted from first cleavage contained a single nucleus. Arrangement of these blastomeres ranged from radial to pseudospiral. Embryonic development was both asynchronous and holoblastic. Following formation of the 4-cell stage, 71% of embryos proceeded to cleave again to form an 8-cell stage. In each of the remaining 29% of embryos, a fusion of from 2-4 blastomeres resulted in 4 possible patterns which had no affect on either cleavage interval timing or subsequent development. The fusion event was not due to ooplasmic segregation. Blastomeres isolated from 4-celled embryos were regulative and developed into normal planula larvae and juvenile anemones that were 1/4 the size of those that developed from intact 4-celled embryos. Embryos exhibiting the fusion phenomenon were examined at the fine structural level. The fusion phenomenon resulted in formation of a secondary syncytium and was not a mere compaction of blastomeres.

The intramolecular Buchner reaction of α-diazo-β-ketonitriles : development and application to the total synthesis of (+)-Salvileucalin B

Since its discovery in 1896, the Buchner reaction has fascinated chemists for more than a century. The highly reactive nature of the carbene intermediates allows for facile dearomatization of stable aromatic rings, and provides access to a diverse array of cyclopropane and seven-membered ring architectures. The power inherent in this transformation has been exploited in the context of a natural product total synthesis and methodology studies.

The total synthesis work details efforts employed in the enantioselective total synthesis of (+)-salvileucalin B. The fully-substituted cyclopropane within the core of the molecule arises from an unprecedented intramolecular Buchner reaction involving a highly functionalized arene and an α-diazo-β-ketonitrile. An unusual retro-Claisen rearrangement of a complex late-stage intermediate was discovered on route to the natural product.

The unique reactivity of α-diazo-β-ketonitriles toward arene cyclopropanation was then investigated in a broader methodological study. This specific di-substituted diazo moiety possesses hitherto unreported selectivity in intramolecular Buchner reactions. This technology was enables the preparation of highly functionalized norcaradienes and cyclopropanes, which themselves undergo various ring opening transformations to afford complex polycyclic structures.

Finally, an enantioselective variant of the intramolecular Buchner reaction is described. Various chiral copper and dirhodium catalysts afforded moderate stereoinduction in the cyclization event.

Molecular neurogenetics of eye development in Drosophila

The compound eye of Drosophila melanogaster begins to differentiate during the late third larval instar in the eye-antennal imaginal disc. A wave of morphogenesis crosses the disc from posterior to anterior, leaving behind precisely patterned clusters of photoreceptor cells and accessory cells that will constitute the adult ommatidia of the retina. By the analysis of genetically mosaic eyes, it appears that any cell in the eye disc can adopt the characteristics of any one of the different cell types found in the mature eye, including photoreceptor cells and non-neuronal accessory cells such as cone cells. Therefore, cells within the prospective retinal epithelium assume different fates presumably via information present in the environment. The sevenless^+ (sev^+) gene appears to play a role in the expression of one of the possible fates, since the mutant phenotype is the lack of one of the pattern elements, namely, photoreceptor cell R7. The sev^+ gene product had been shown to be required during development of the eye, and had also been shown in genetic mosaics to be autonomous to presumptive R7. As a means of better understanding the pathway instructing the differentiation R7, the gene and its protein product were characterized.

The sev+ gene was cloned by P-element transposon tagging, and was found to encode an 8.2 kb transcript expressed in developing eye discs and adult heads. By raising monoclonal antibodies (MAbs) against a sev^+- β-galactosidase fusion protein, the expression of the protein in the eye disc was localized by immuno-electronmicroscopy. The protein localizes to the apical cell membranes and microvilli of cells in the eye disc epithelium. It appears during development at a time coincident with the initial formation of clusters, and in all the developing photoreceptors and accessory cone cells at a time prior to the overt differentiation of R7. This result is consistent with the pluripotency of cells in the eye disc. Its localization in the membranes suggests that it may receive information directing the development of R7. Its localization in the apical membranes and microvilli is away from the bulk of the cell contacts, which have been cited as a likely regions for information presentation and processing. Biochemical characterization of the sev^+ protein will be necessary to describe further its role in development.

Other mutations in Drosophila have eye phenotypes. These were analyzed to find which ones affected the initial patterning of cells in the eye disc, in order to identify other genes, like sev, whose gene products may be involved in generating the pattern. The adult eye phenotypes ranged from severe reduction of the eye, to variable numbers of photoreceptor cells per ommatidium, to sub de defects in the organization of the supporting cells. Developing eye discs from the different strains were screened using a panel of MAbs, which highlight various developmental stages. Two identified matrix elements in and anterior to the furrow, while others identified the developing ommatidia themselves, like the anti-sev MAb. Mutation phenotypes were shown to appear at many stages of development. Some mutations seem to affect the precursor cells, others, the setting up of the pattern, and still others, the maintenance of the pattern. Thus, additional genes have now been identified that may function to support the development of a complex pattern.

Optimal procurement and contracting with research and development

Government procurement of a new good or service is a process that usually includes basic research, development, and production. Empirical evidences indicate that investments in research and development (R and D) before production are significant in many defense procurements. Thus, optimal procurement policy should not be only to select the most efficient producer, but also to induce the contractors to design the best product and to develop the best technology. It is difficult to apply the current economic theory of optimal procurement and contracting, which has emphasized production, but ignored R and D, to many cases of procurement.

In this thesis, I provide basic models of both R and D and production in the procurement process where a number of firms invest in private R and D and compete for a government contract. R and D is modeled as a stochastic cost-reduction process. The government is considered both as a profit-maximizer and a procurement cost minimizer. In comparison to the literature, the following results derived from my models are significant. First, R and D matters in procurement contracting. When offering the optimal contract the government will be better off if it correctly takes into account costly private R and D investment. Second, competition matters. The optimal contract and the total equilibrium R and D expenditures vary with the number of firms. The government usually does not prefer infinite competition among firms. Instead, it prefers free entry of firms. Third, under a R and D technology with the constant marginal returns-to-scale, it is socially optimal to have only one firm to conduct all of the R and D and production. Fourth, in an independent private values environment with risk-neutral firms, an informed government should select one of four standard auction procedures with an appropriate announced reserve price, acting as if it does not have any private information.

Development of Asymmetric Protonation Reactions for the Synthesis of Indoline Alkaloids

Nitrogen-containing heterocycles, such as indolines and pyrroloindolines, are prevalent in a variety of diverse natural products, many of which exhibit remarkable biological activities. These frameworks have inspired innovative research aimed at discovering novel methods for their stereoselective preparation.

We have developed an enantioselective synthesis of pyrroloindolines based on a formal (3 + 2) cycloaddition of indoles and 2-amidoacrylates. This reaction is promoted by (R)-BINOL•SnCl₄; this complex is a Lewis acid-assisted Brønsted acid that effects a highly face-selective catalyst-controlled protonation of an enolate. Mechanistic studies also determined that the initial product of this reaction is an indolinium ion, which upon aqueous workup undergoes cyclization to the pyrroloindoline.

Based on this result, we investigated alternative nucleophiles to trap the indolinium ion. First, addition of sodium borohydride to the optimized reaction conditions yields indoline-containing amino acid derivatives.

Next, carbon nucleophiles were explored. Indole substrates incorporating a tethered alkene were exposed to the conditions for the formal (3 + 2) cycloaddition, resulting in a conjugate addition/asymmetric protonation/Prins cyclization cascade. In this transformation, the indolinium ion is attacked by the olefin, and the resulting carbocation is quenched by a chloride ion. Zirconium tetrachloride was found to be the optimal Lewis acid. Stoichiometric proton and chloride sources were also found to be crucial for reactivity.

A modelling approach to the development of an active management strategy for the Queen Elizabeth II reservoir

This article outlines the outcome of work that set out to provide one of the specified integral contributions to the overarching objectives of the EU- sponsored LIFE98 project described in this volume. Among others, these included a requirement to marry automatic monitoring and dynamic modelling approaches in the interests of securing better management of water quality in lakes and reservoirs. The particular task given to us was to devise the elements of an active management strategy for the Queen Elizabeth II Reservoir. This is one of the larger reservoirs supplying the population of the London area: after purification and disinfection, its water goes directly to the distribution network and to the consumers. The quality of the water in the reservoir is of primary concern, for the greater is the content of biogenic materials, including phytoplankton, then the more prolonged is the purification and the more expensive is the treatment. Whatever good that phytoplankton may do by way of oxygenation and oxidative purification, it is eventually relegated to an impurity that has to be removed from the final product. Indeed, it has been estimated that the cost of removing algae and microorganisms from water represents about one quarter of its price at the tap. In chemically fertile waters, such as those typifying the resources of the Thames Valley, there is thus a powerful and ongoing incentive to be able to minimise plankton growth in storage reservoirs. Indeed, the Thames Water company and its predecessor undertakings, have a long and impressive history of confronting and quantifying the fundamentals of phytoplankton growth in their reservoirs and of developing strategies for operation and design to combat them. The work to be described here follows in this tradition. However, the use of the model PROTECH-D to investigate present phytoplankton growth patterns in the Queen Elizabeth II Reservoir questioned the interpretation of some of the recent observations. On the other hand, it has reinforced the theories underpinning the original design of this and those Thames-Valley storage reservoirs constructed subsequently. The authors recount these experiences as an example of how simulation models can hone the theoretical base and its application to the practical problems of supplying water of good quality at economic cost, before the engineering is initiated.

Commodity and product identification for value chain analysis.

This commodity and product identification research was undertaken in the context of the CGIAR Research Program on Aquatic Agricultural Systems (AAS). AAS seeks to reduce poverty and improve food security for the millions of small-scale fishers and farmers who depend on the world’s floodplains, deltas and coasts. The objective of this research is to strengthen the capacity of AAS to undertake value chain studies with high potential impact on smallholders. The capacity-building aspect of this research was focused on the process of commodity and product identification for value chain analysis. Its scope was limited to fish and other aquatic animals and products in the Tonle Sap area identified for AAS intervention. The result of the identification process was the selection of a number of commodities and products that were deemed to involve a high number of smallholders along the value chain and that have high market development potential.

Development of canned products from Indian major carp, catla (Catla catla)

Pieces of catla fish (Catla catla, a major carp of lndian subcontinent) of length 10 to 11 cm and thickness 1.0 to 1.5cm were precooked by two methods; steam precooking and frying. The precooked pieces were packed_in No.1 tall can (30lx411) with various hot filling media like oil, brine, tomato sauce and curry. Cans were seamed by a hand seamer and retorted at 117.2° C (12 psi) for 90 minutes. All the canned products had satisfactory cut-out, biochemical and organoleptic characteristics. Steam precooked canned products had moisture content of 65.6 to 74%, protein content of 20.8 to 22%, fat content of 1.1 to 6.6% and ash content of 2.1 to 2.5%; whereas fried canned products had moisture content of 65.4 to 68.2%, protein content of 21.3 to 22%, fat content of 7 to 10.2% and ash content of 2.1 to 2.7% on wet wt. basis. Salt content in steam precooked and fried canned products varied from 1.2 to 1.9% and 2.0 to 2.5% respectively. All the canned products were organoleptically good. However, degree of preference varied for different products. Canned fried catla in curry was the best product among all types of packs. Among the precooking methods, frying was more efficient than steam precooking in controlling the amount of exudate to a desirable limit in canned products. However, crispness, the characteristic quality for a fried fish, was lost during retorting. There was no change in quality characteristics during a storage period of 3 months at ambient temperature (32±2°C).

Utilization of trash fish for human consumption. 3: Studies on the development of fish pickle from Nemipterus japonicus

A method for the preparation of fish pickles from a lean variety of fish namely pink perch (Nemipterus japonicus) is described. Dipping the fish in 10% sodium chloride solution containing 6% acetic acid before pickling, was found desirable for retaining the meaty texture of the product. The product has no fish smell or flavour and has a shelf life of more than six months at ambient temperatures and scored very well in organoleptic tests.

Exploring the impacts of the interactions between lifecycles and other dynamics that influence the development of technology-based industries

To address future uncertainty within strategy and innovation, managers extrapolate past patterns and trends into the future. Several disciplines make use of lifecycles, often with a linear sequence of identified phases, to make predictions and address likely uncertainties. Often the aggregation of several cycles is then interpreted as a new cycle - such as product lifecycles into an industry lifecycle. However, frequently different lifecycle terms - technology, product, industry - are used interchangeably and without clear definition. Within the interdisciplinary context of technology management, this juxtaposition of dynamics can create confusion, rather than clarification. This paper explores some typical dynamics associated with technology-based industries, using illustrative examples from the automotive industry. A wide range of dimensions are seen to influence the path of a technology-based industry, and stakeholders need to consider the likely causality and synchronicity of these. Some curves can simply present the aggregation of components; other dynamics incur time lags, rather than being superimposed, but still have a significant impact. To optimise alignment of the important dimensions within any development, and for future strategy decisions, understanding these interactions will be critical. © 2011 IEEE.

A policy dimension required for technology roadmapping: Learning from the development of emerging wind energy industry in China

Innovation policies play an important role throughout the development process of emerging industries. However, existing policy studies view the process as a black-box, and fail to understand the policy-industry interactions through the process. This paper aims to develop an integrated technology roadmapping tool, in order to facilitate the better understanding of policy heterogeneity at the different stages of new energy industries in China. Through the case study of Chinese wind energy equipment manufacturing industry, this paper elaborates the dynamics between policy and the growth process of the industry. Further, this paper generalizes some Chinese specifics for the policy-industry interactions. As a practical output, this study proposes a policy-technology roadmapping framework that maps policy-market-product- technology interactions in response to the requirement for analyzing and planning the development of new industries in emerging economies (e.g. China). This paper will be of interest to policy makers, strategists, investors, and industrial experts. © 2011 IEEE.

Development of canned fish curry

A process for canning sardine in two different curry media is presented. One curry medium yields a product with medium pungency while the second one has a low pungency. Sardine canned in curry medium having medium pungency developed signs of internal corrosion as well as slight bitter taste at the end of 15 months storage at ambient temperature. Similar phenomenon took place in the other product only at the end of 18 months storage. Being a ready to serve product it needs no further preparation for the table.

Development of a process for canning fresh water fish rohu (Labeo rohita)

Results of experiments conducted to work out a process for canning fresh water fish rohu (Labeo rohita) from culture sources are presented. In order to impart a proper firm texture to the meat cold blanching the skinless boneless meat in 15% brine containing 0.25% calcium chloride was found necessary. Increasing the concentration of calcium chloride beyond 0.25% resulted in impairing the quality of meat, the texture becoming more fibrous and the flavour being adversely affected. Other firming agents tried did not yield any beneficial effect. The meat so blanched yielded a good product when canned in natural style.