Fabrication technology and applications of fiber Bragg gratings

In this thesis theoretical and technological aspects of fiber Bragg gratings (FBG) are considered. The fabrication of uniform and chirped fiber Bragg gratings using phase mask technique has been exploited throughout this study. Different requires of FBG inscription were considered and implemented experimentally to find economical and effective procedure. The hydrogen loading was used as a method for enhancement the photosensitivity of the fiber. The minimum loading time for uniform and chirped fiber Bragg gratings was determined as 3 days and 7 days at T = 50°C and hydrogen pressure 140 bar, respectively. The post-inscription annealing was considered to avoid excess losses induced by the hydrogen. The wavelength evolution during annealing was measured. The strain and temperature sensor application of FBG was considered. The wavelength shifts caused by tension and temperature were studied for both uniform and chirp fiber Bragg gratings.

Clustering and international competitiveness of information technology industry in the Saint Petersburg area

The main objective of this study is to assess the potential of the information technology industry in the Saint Petersburg area to become one of the new key industries in the Russian economy. To achieve this objective, the study analyzes especially the international competitiveness of the industry and the conditions for clustering. Russia is currently heavily dependent on its natural resources, which are the main source of its recent economic growth. In order to achieve good long-term economic performance, Russia needs diversification in its well-performing industries in addition to the ones operating in the field of natural resources. The Russian government has acknowledged this and started special initiatives to promote such other industries as information technology and nanotechnology. An interesting industry that is basically less than 20 years old and fast growing in Russia, is information technology. Information technology activities and markets are mainly concentrated in Russia’s two biggest cities, Moscow and Saint Petersburg, and areas around them. The information technology industry in the Saint Petersburg area, although smaller than Moscow, is especially dynamic and is gaining increasing foreign company presence. However, the industry is not yet internationally competitive as it lacks substantial and sustainable competitive advantages. The industry is also merely a potential global information technology cluster, as it lacks the competitive edge and a wide supplier and manufacturing base and other related parts of the whole information technology value system. Alone, the industry will not become a key industry in Russia, but it will, on the other hand, have an important supporting role for the development of other industries. The information technology market in the Saint Petersburg area is already large and if more tightly integrated to Moscow, they will together form a huge and still growing market sufficient for most companies operating in Russia currently and in the future. Therefore, the potential of information technology inside Russia is immense.

Marketing in support of sales in industrial high technology company

The aim of this study is to find out how Metso Paper’s marketing could better support sales and how sales people are executing marketing during the sales processes. This study is done from sales people’s point of view. The study is limited to cover only company’s internal environment. This research was executed through literature review and qualitative theme interviews, where 20 of Metso Paper’s sales people were interviewed. The interviewees were asked to tell their opinions about marketing’s support, marketing materials, information and the relationship between sales and marketing. The results of this study show that the relationship between marketing and sales is rather good, but there is still a great need for improvements. It is hoped that marketing would take more part in the selling processes. In addition, more information about the launches and schedules were also hoped for. Marketing is told to be quite Finland centric and sales people are wishing for more adopted marketing materials and occasions. It came up during the interviews, that sales people are not so willing to give regular feedback to marketing and quite often they think that marketing’s role in Metso Paper is not important at all.

Handover aspects in Unlicensed Mobile Access Technology

Fixed Mobile Convergence is the recent buzz in the field of telecommunication technology. Unlicensed Mobile Access (UMA) technology is a realistic implementation of Fixed Mobile Convergence. UMA involves communication between different types of networks. Handover is a very important issue in UMA. The study is an analysis of theoretical handover mechanism and practical test results. It includes a new proposal for handover performance test in UMA. It also provides an overview of basic handover operation on different scenarios in UMA. The practical test involves an experiment on handover performance test using network analyzers. The new proposal provides a different approach for an experimental setting on handover performance test without using network analyzers. The approach is not be implemented because of some technical problem in a network equipment in UMA. The analysis of the test results reveals that time of handover between UMA and Global System for Mobile Communication (GSM) network is similar to time of handover between inter base station controller (BSC) handover in GSM networks. The new approach is simple and provides measurement at the end point communicating entities. The study gives a general understanding of handover operation, an analysis of handover performance in UMA and specifically provides a new approach useful for further study of handover in different real world environments and scenarios.

Content and Language Integration as a part of a degree reform at Tampere University of Technology

Tampere University of Technology is undergoing a degree reform that started in 2013. One of the major changes in the reform was the integration of compulsory Finnish, Swedish and English language courses to substance courses at the bachelor level. The integration of content and language courses aims at higher quality language learning, more fluency in studies, and increased motivation toward language studies. In addition, integration is an opportunity to optimize the use of resources and to offer courses that are more tailored to the students' field of study and to the skills needed in working life. The reform also aims to increase and develop co-operation between different departments at the university and to develop scientific follow up. This paper gives an overview of the integration process conducted at TUT and gives examples of adjunct CLIL implementations in three different languages.

Population ageing and ICT: An exploratory review of technology innovation trough digital applications

The multidimensional process of physical, psychological, and social change produced by population ageing affects not only the quality of life of elderly people but also of our societies. Some dimensions of population ageing grow and expand over time (e.g. knowledge of the world events, or experience in particular situations), while others decline (e.g. reaction time, physical and psychological strength, or other functional abilities like reduced speed and tiredness). Information and Communication Technologies (ICTs) can help elderly to overcome possible limitations due to ageing. As a particular case, biometrics can allow the development of new algorithms for early detection of cognitive impairments, by processing continuous speech, handwriting or other challenged abilities. Among all possibilities, digital applications (Apps) for mobile phones or tablets can allow the dissemination of such tools. In this article, after presenting and discussing the process of population ageing and its social implications, we explore how ICTs through different Apps can lead to new solutions for facing this major demographic challenge.

The learning about imaging diagnosis technology

Objective To investigate the learning about management of the technology (efficient use, acquisition and maintenance of imaging diagnosis equipment) in the radiology residency program of Escola Paulista de Medicina - Universidade Federal de São Paulo, with a view to improving the education of radiologists. Materials and Methods Exploratory research where residents, faculty staff and tutors of the program were quantitative and qualitatively approached with Likert scale questionnaires (46), and deepening with recorded interviews (18) and categorization based upon meaning units (thematic analysis). Results Among the participants, 66% agreed that they had the opportunity of learning about the use of radiological equipment; for 61% the program should include knowledge on the importance of acquiring equipment; and 72% emphasized the lack of learning about equipment management and maintenance. Conclusion As the major moment in the education of specialists, the medical residency program provides residents with a favorable environment to the learning of the skills required to the future of their professional practice, but with limited emphasis on the management of the technology: efficient use, acquisition and mainly maintenance of equipment, still poorly explored. Both the investigated program and the medical residency in radiology should incorporate, whenever possible, the commitment with the training in supplementary skills related to equipment management, developing the competence of the future radiologists.

Towards automated specifications of scenarios in enhanced learning technology

Recent standardization efforts in e-learning technology have resulted in a number of specifications, however, the automation process that is considered essential in a learning management system (LMS) is a lessexplored one. As learning technology becomes more widespread and more heterogeneous, there is a growing need to specify processes that cross the boundaries of a single LMS or learning resource repository. This article proposes to obtain a specification orientated to automation that takes on board the heterogeneity of systems and formats and provides a language for specifying complex and generic interactions. Having this goal in mind, a technique based on three steps is suggested. The semantic conformance profiles, the business process management (BPM) diagram, and its translation into the business process execution language (BPEL) seem to be suitable for achieving it.

Technology Catching-up and the Role of Institutions

The aim of the paper is to investigate the role played by differences in Institutional Quality on the process of technology catch-up across countries. Empirical evidence shows how countries endowed with better institutions are those experiencing higher TFP growth rates, faster rates of technology adoption and hence being those more rapidly closing the gap with the frontier. Conversely, countries lacking some minimum institutional level are shown to diverge in the long run and not to catch-up. Some institutions, however, play an ambiguous role in the creation and adoption of technology. We find that the tightening of Intellectual Property Rights reduces the ability of followers to freely imitate technology slowing down their catchup rate. This negative effect is stronger the farther the countriesare found from the frontier. Other institutional categories such as openness to trade, instead, benefit both leaders and followers.

Process intensification: From optimised flow patterns to microprocess technology

This thesis is focused on process intensification. Several significant problems and applications of this theme are covered. Process intensification is nowadays one of the most popular trends in chemical engineering and attempts have been made to develop a general, systematic methodology for intensification. This seems, however, to be very difficult, because intensified processes are often based on creativity and novel ideas. Monolith reactors and microreactors are successful examples of process intensification. They are usually multichannel devices in which a proper feed technique is important for creating even fluid distribution into the channels. Two different feed techniques were tested for monoliths. In the first technique a shower method was implemented by means of perforated plates. The second technique was a dispersion method using static mixers. Both techniques offered stable operation and uniform fluid distribution. The dispersion method enabled a wider operational range in terms of liquid superficial velocity. Using dispersion method, a volumetric gas-liquid mass transfer coefficient of 2 s-1 was reached. Flow patterns play a significant role in terms of the mixing performance of micromixers. Although the geometry of a T-mixer is simple, channel configurations and dimensions had a clear effect on mixing efficiency. The flow in the microchannel was laminar, but the formation of vortices promoted mixing in micro T-mixers. The generation of vortices was dependent on the channel dimensions, configurations and flow rate. Microreactors offer a high ratio of surface area to volume. Surface forces and interactions between fluids and surfaces are, therefore, often dominant factors. In certain cases, the interactions can be effectively utilised. Different wetting properties of solid materials (PTFE and stainless steel) were applied in the separation of immiscible liquid phases. A micro-scale plate coalescer with hydrophilic and hydrophobic surfaces was used for the continuous separation of organic and aqueous phases. Complete phase separation occurred in less than 20 seconds, whereas the separation time by settling exceeded 30 min. Fluid flows can be also intensified in suitable conditions. By adding certain additives into turbulent fluid flow, it was possible to reduce friction (drag) by 40 %. Drag reduction decreases frictional pressure drop in pipelines which leads to remarkable energy savings and decreases the size or number of pumping facilities required, e.g., in oil transport pipes. Process intensification enables operation often under more optimal conditions. The consequent cost savings from reduced use of raw materials and reduced waste lead to greater economic benefits in processing.

Older consumers adopting information and communication technology: Evaluating opportunities for health care applications

The purpose of this dissertation is to analyse older consumers' adoption of information and communication technology innovations, assess the effect of aging related characteristic, and evaluate older consumers' willingness to apply these technologies in health care services. This topic is considered important, because the population in Finland (as in other welfare states) is aging and thus offers a possibility for marketers, but on the other hand threatens society with increasing costs for healthcare. Innovation adoption has been under research from several aspects in both organizational and consumer research. In the consumer behaviour, several theories have been developed to predict consumer responses to innovation. The present dissertation carefully reviews previous research and takes a closer look at the theory of planned behaviour, technology acceptance model and diffusion of innovations perspective. It is here suggested that there is a possibility that these theories can be combined and complemented to predict the adoption of ICT innovations among aging consumers, taking the aging related personal characteristics into account. In fact, there are very few studies that have concentrated on aging consumers in the innovation research, and thus there was a clear indent for the present research. ICT in the health care context has been studied mainly from the organizational point of view. If the technology is thus applied for the communication between the individual end-user and service provider, the end-user cannot be shrugged off. The present dissertation uses empirical evidence from a survey targeted to 55-79 year old people from one city in Southern-Carelia. The empirical analysis of the research model was mainly based on structural equation modelling that has been found very useful on estimating causal relationships. The tested models were targeted to predict the adoption stage of personal computers and mobile phones, and the adoption intention of future health services that apply these devices for communication. The present dissertation succeeded in modelling the adoption behaviour of mobile phones and PCs as well as adoption intentions of future services. Perceived health status and three components behind it (depression, functional ability, and cognitive ability) were found to influence perception of technology anxiety. Better health leads to less anxiety. The effect of age was assessed as a control variable, in order to evaluate its effect compared to health characteristics. Age influenced technology perceptions, but to lesser extent compared to health. The analyses suggest that the major determinant for current technology adoption is perceived behavioural control, and additionally technology anxiety that indirectly inhibit adoption through perceived control. When focusing on future service intentions, the key issue is perceived usefulness that needs to be highlighted when new services are launched. Besides usefulness, the perception of online service reliability is important and affects the intentions indirectly. To conclude older consumers' adoption behaviour is influenced by health status and age, but also by the perceptions of anxiety and behavioural control. On the other hand, launching new types of health services for aging consumers is possible after the service is perceived reliable and useful.