Pk-yritysten kehittäminen työllisyyden näkökulmasta

Tämän työn tarkoituksena on hahmottaa pk-yrityksien työllistämismahdollisuuksia teollisuuden rakennemuutoksen karsiessa suurteollisuuden työpaikkoja. Tutkimuksessa selvitetään työllistämistä estäviä ja vaikeuttavia tekijöitä pk-yrityksissä sekä pyritään löytämään niihin liittyviä kehittämisehdotuksia. Tutkimus on kirjallisuuspohjainen katsaus, johon liittyy haastattelututkimus, jossa kohderyhmänä ovat julkisen sektorin edustajat ja toisena osapuolena yksityisen sektorin yrittäjät. Tutkimuksen työn pääongelmana on kartoittaa työllistämisesteitä pk-yrityksissä ja etsiä kehittämistoimenpiteitä, joilla työllistämismahdollisuuksien edistämiseksi. Lisäksi etsitään keinoja edistää yrittäjyyttä erityisesti työllisyyden näkökulmasta. Yrittäjyys ja pk-yritykset ovat voimavara, jonka kasvu- ja kehitysongelmia pienentämällä voidaan merkittävästi vaikuttaa uusien työpaikkojen syntymiseen. Työn alaongelmia ovat: irtisanomissuoja, keskitetty työmarkkinajärjestelmä ja ay-liike, työaikamääräykset, työvoimakustannukset ja paikallisen sopimisen puutteellisuus. Muita työllistämisen ongelmia ovat mm. ammattitaitoisen työvoiman saanti, työttömyysturva ja ensimmäisen työntekijän palkkaaminen. Työn lopputuloksina esitetään mm. irtisanomissuojan heikentämistä, ay-liikkeen saamista mukaan paikalliseen sopimiseen ja joustoihin, työaikamääräysten joustoja, työvoimakustannuksista verotuksen kannustavammaksi rakentamista ja sova-maksujen porrastamista pk-yrityksille oikealla tavalla ja paikallisen sopimisen vahvistamista. Lisäksi työttömyys-turvaa tulee muuttaa kannustavammaksi, ammattitaitoisen työvoiman saantia edistää ja ensimmäisen työntekijän palkkaamista on tuettava.

Pk-yritysten kehittäminen työllisyyden näkökulmasta

Tämän työn tarkoituksena on hahmottaa pk-yrityksien työllistämismahdollisuuksia teollisuuden rakennemuutoksen karsiessa suurteollisuuden työpaikkoja. Tutkimuksessa selvitetään työllistämistä estäviä ja vaikeuttavia tekijöitä pk-yrityksissä sekä pyritään löytämään niihin liittyviä kehittämisehdotuksia. Tutkimus on kirjallisuuspohjainen katsaus, johon liittyy haastattelututkimus, jossa kohderyhmänä ovat julkisen sektorin edustajat ja toisena osapuolena yksityisen sektorin yrittäjät. Tutkimuksen työn pääongelmana on kartoittaa työllistämisesteitä pk-yrityksissä ja etsiä kehittämistoimenpiteitä, joilla työllistämismahdollisuuksien edistämiseksi. Lisäksi etsitään keinoja edistää yrittäjyyttä erityisesti työllisyyden näkökulmasta. Yrittäjyys ja pk-yritykset ovat voimavara, jonka kasvu- ja kehitysongelmia pienentämällä voidaan merkittävästi vaikuttaa uusien työpaikkojen syntymiseen. Työn alaongelmia ovat: irtisanomissuoja, keskitetty työmarkkinajärjestelmä ja ay-liike, työaikamääräykset, työvoimakustannukset ja paikallisen sopimisen puutteellisuus. Muita työllistämisen ongelmia ovat mm. ammattitaitoisen työvoiman saanti, työttömyysturva ja ensimmäisen työntekijän palkkaaminen. Työn lopputuloksina esitetään mm. irtisanomissuojan heikentämistä, ay-liikkeen saamista mukaan paikalliseen sopimiseen ja joustoihin, työaikamääräysten joustoja, työvoimakustannuksista verotuksen kannustavammaksi rakentamista ja sova-maksujen porrastamista pk-yrityksille oikealla tavalla ja paikallisen sopimisen vahvistamista. Lisäksi työttömyysturvaa tulee muuttaa kannustavammaksi, ammattitaitoisen työvoiman saantia edistää ja ensimmäisen työntekijän palkkaamista on tuettava.

Past, present and future - assessing changes in aquatic environments using subfossil diatoms

The deterioration of surface waters is one of the most important issues in the environmental management of the European Union. Thus, the EU Water Framework Directive 2000/60/EC (WFD) requires “good ecological and chemical status” of surface waters by 2015 allowing only a slight departure from ecological reference conditions characterized by the biological communities typical for the conditions of minimal anthropogenic impact. The WFD requires the determination of ecological reference conditions and the present ecological status of surface waters. To meet this legislative demand, sedimentary diatom assemblages were used in these studies with various methods 1) to assess natural and human activity induced environmental changes, 2) to characterize background conditions 3) to evaluate the present ecological status and 4) to predict the future of the water bodies in the light of palaeolimnological data. As the WFD refers to all surface waters, both coastal and inland sites were included. Two long and two short sediment cores from the Archipelago Sea in the northern Baltic Sea were examined for their siliceous microfossils in order to assess (1) the Holocene palaeoenvironmental history and (2) the recent eutrophication of the area. The diatom record was divided into local diatom assemblage zones (LDAZ, long cores) and diatom assemblage zones (DAZ, short cores). Locally weighted weighted averaging regression and calibration (LWWA) was applied for the quantitative reconstruction of past TN concentrations (short cores). An age model for the long cores was constructed by using independent palaeomagnetic and AMS-14C methods. The short cores were dated using radiometric (210Pb, 226Ra and 137Cs) methods. The long cores date back to the early history of the Archipelago Sea, which was freshwater – no salinity increase referable to the brackish phase of the Yoldia Sea is recognized. The nutrient status of the lacustrine phase was slightly higher in the Archipelago Sea than in the Baltic Proper. Initial brackish-water influence is observed at 8 150 ±80 cal. BP (LDAZ4), but fully brackish conditions were established at 7 700 ±80 cal. BP (LDAZ5). The diatom assemblages indicate increasing salinity, warming climate and possible eutrophic conditions during the lacustrine to brackish-water transition. The decreasing abundance of Pseudosolenia calcar-avis (Schultze) Sundström and the increasing abundance of the ice-cover indicator species Pauliella taeniata (Grunow) Round and Basson indicate decreasing salinity and climatic cooling after ca. 5 000 cal. BP. Signs of eutrophication are visible in the most recent diatom assemblage zones of both short cores. Diatom-inferred total nitrogen (DI-TN) reconstructions partially fail to trace the actual measured total nitrogen concentrations especially from the late 1980s to the mid 1990s. This is most likely due to the dominating diatom species Pauliella taeniata, Thalassiosira levanderi Van Goor and Fragilariopsis cylindrus (Grunow) W. Krieger being more influenced by factors such as the length of the ice-season rather than nutrient concentrations. It is concluded that the diatom assemblages of the study sites are principally governed by climate fluctuations, with a slight influence of eutrophication visible in the most recent sediments. There are indications that global warming, with reduced ice cover, could impact the spring blooming diatom species composition in the Archipelago Sea. In addition, increased sediment accumulation in the early 90s coincides with the short ice-seasons suggesting that warming climate with decreasing ice-cover may increase sedimentation in the study area. The diverse diatom assemblages dominated by benthic species (54 %) in DAZ1 in the Käldö Fjärd core can be taken as background diatom assemblages for the Archipelago Sea. Since then turbidity has increased and the diatom assemblages have been dominated by planktonic diatoms from around the mid 1800s onwards. The reconstructed reference conditions for the total nitrogen concentrations fluctuate around 400 μg l-1. Altogether two short sediment cores and eight short cores for top-bottom analysis were retrieved from Lake Orijärvi and Lake Määrjärvi to assess the impact of the acid mine drainage (AMD) derived metals from the Orijärvi mine tailings on the diatom communities of the lakes. The Cu (Pb, Zn) mine of Orijärvi (1757 – 1956) was the first one in Finland where flotation techniques (1911 – 1955) were used to enrich ore and large quantities of tailings were produced. The AMD derived metal impact to the lakes was found to be among the heaviest thus far recorded in Finland. Concentrations of Cu, Pb and Zn in Lake Orijärvi sediments are two to three orders of magnitude higher than background values. The metal inputs have affected Lake Orijärvi and Lake Määrjärvi diatom communities at the community levels through shifts in dominant taxa (both lakes) and at the individual level through alteration in frustule morphology (Lake Orijärvi). At present, lake water still has elevated heavy metal levels, indicating that the impact from the tailings area continues to affect both lakes. Lake Orijärvi diatom assemblages are completely dominated by benthic species and are lacking planktonic diatoms. In Lake Määrjärvi the proportion of benthic and tychoplanktonic diatoms has increased and the planktonic taxa have decreased in abundance. Achnanthidium minutissimum Kützing and Brachysira vitrea (Grun.) R. Ross in Hartley were the most tolerant species to increased metal concentrations. Planktonic diatoms are more sensitive to metal contamination than benthic taxa, especially species in the genus Cyclotella (Kützing) Brébisson. The ecological reference conditions assessed in this study for Lake Orijärvi and Lake Määrjärvi comprise diverse planktonic and benthic communitites typical of circumneutral oligotrophic lakes, where the planktonic diatoms belonging to genera Cyclotella , Aulacoseira Thwaites, Tabellaria Ehrenberg and Asterionella Hassall dominate in relative abundances up to ca. 70%. The benthic communities are more diverse than the planktonic consisting of diatoms belonging to the genera Achnanthes Bory, Fragilaria Lyngbye and Navicula St. Vincent. This study clearly demonstrates that palaeolimnological methods, especially diatom analysis, provide a powerful tool for the EU Water Frame Work Directive for defining reference conditions, natural variability and current status of surface waters. The top/bottom approach is a very useful tool in larger-scale studies needed for management purposes. This “before and after” type of sediment sampling method can provide a very time and cost effective assessment of ecological reference conditions of surface waters.

Kuivatuotetoimitusketjun kehittäminen

Diplomityön tarkoituksena on selvittää kuivatuotetoimitusketjun haasteet ja kehittää toimintaan parannuskeinoja. Kuivatuotetoimitusketjun kehittämisessä pyritään varmistamaan tärkeimpien asiakkaiden tilauksien toimitusvarmuus sekä parantamaan asiakkailta saatavaa kysyntätietoa. Näistä kahdesta osa-alueesta muodostuu kokonaisuus, jonka avulla parannetaan toimitusketjun suorituskykyä. Työn tuloksena kysynnän ennustettavuutta kehitetään lähtötilanteesta toteutetulla kysyntäennustelomakkeella, jonka avulla kerätään tietoa tärkeimpien asiakkaiden tulevasta kysynnästä. Analyyseissä valmisvarastoille määritetään optimitasot, jolloin materiaalinohjausta voidaan hallita systemaattisemmin. Laskelmien yksityiskohtaisia tuloksia ei sisällytetä työhön. Työssä tarkastellaan myös varastotilan riittävyyttä sekä vaihtoehtoja kapasiteetin lisäämiseksi.

Elintarvikkeiden saatavuuden varmistamisen keinot ja ostotilausprosessin kehittäminen tukkuliikkeessä

Työn tavoitteena oli selvittää, miten elintarviketukun suurtaloustuotteiden saatavuus voitaisiin varmistaa. Nykyisellään suurtalouselintarvikkeiden kysynnän vaihtelut ovat vaikeasti hallittavia, mikä nostaa niiden varastotasoja aiheuttaen ongelmia kohdeyrityksen ahtaaksi käyneessä varastossa. Lisäksi tuotteiden tilaaminen työllistää neljä henkilöä ja mahdollinen tilausmäärien kasvu lisäisi henkilöstötarvetta entisestään. Työn tuloksena yrityksen tuotteet sekä toimittajat jaettiin neljään eri ryhmään: paras a-ryhmä, haasteryhmä, testiryhmä ja poistoryhmä. Näiden ryhmien varastojen ja tilausten hallitsemiseksi esitettiin puolestaan kolme eri tapaa: Automaattiset ostotilaukset sopivat kaikille tasaisen kysynnän tuotteille. Suuren kysynnän vaihtelun tuotteille voidaan käyttää nykyistä tilaustapaa sekä hyödyntää mahdollisuuksien mukaan asiakkailta saatavia menekkiennusteita tilaamisen tukena. Ongelmallisten suuren kysynnän vaihtelun ja pienen menekin tuotteiden kohdalla tuot-teet voidaan joko poistaa kokonaan yrityksen valikoimasta tai niiden tilaaminen voidaan muuttaa varasto-ohjauksen sijaan tilausohjautuvaksi.

Scalable algorithms for height field illumination

Global illumination algorithms are at the center of realistic image synthesis and account for non-trivial light transport and occlusion within scenes, such as indirect illumination, ambient occlusion, and environment lighting. Their computationally most difficult part is determining light source visibility at each visible scene point. Height fields, on the other hand, constitute an important special case of geometry and are mainly used to describe certain types of objects such as terrains and to map detailed geometry onto object surfaces. The geometry of an entire scene can also be approximated by treating the distance values of its camera projection as a screen-space height field. In order to shadow height fields from environment lights a horizon map is usually used to occlude incident light. We reduce the per-receiver time complexity of generating the horizon map on N N height fields from O(N) of the previous work to O(1) by using an algorithm that incrementally traverses the height field and reuses the information already gathered along the path of traversal. We also propose an accurate method to integrate the incident light within the limits given by the horizon map. Indirect illumination in height fields requires information about which other points are visible to each height field point. We present an algorithm to determine this intervisibility in a time complexity that matches the space complexity of the produced visibility information, which is in contrast to previous methods which scale in the height field size. As a result the amount of computation is reduced by two orders of magnitude in common use cases. Screen-space ambient obscurance methods approximate ambient obscurance from the depth bu er geometry and have been widely adopted by contemporary real-time applications. They work by sampling the screen-space geometry around each receiver point but have been previously limited to near- field effects because sampling a large radius quickly exceeds the render time budget. We present an algorithm that reduces the quadratic per-pixel complexity of previous methods to a linear complexity by line sweeping over the depth bu er and maintaining an internal representation of the processed geometry from which occluders can be efficiently queried. Another algorithm is presented to determine ambient obscurance from the entire depth bu er at each screen pixel. The algorithm scans the depth bu er in a quick pre-pass and locates important features in it, which are then used to evaluate the ambient obscurance integral accurately. We also propose an evaluation of the integral such that results within a few percent of the ray traced screen-space reference are obtained at real-time render times.

Heterogeneous mass transfer in fluidized beds by computational fluid dynamics

The main objective of this research is to estimate and characterize heterogeneous mass transfer coefficients in bench- and pilot-scale fluidized bed processes by the means of computational fluid dynamics (CFD). A further objective is to benchmark the heterogeneous mass transfer coefficients predicted by fine-grid Eulerian CFD simulations against empirical data presented in the scientific literature. First, a fine-grid two-dimensional Eulerian CFD model with a solid and gas phase has been designed. The model is applied for transient two-dimensional simulations of char combustion in small-scale bubbling and turbulent fluidized beds. The same approach is used to simulate a novel fluidized bed energy conversion process developed for the carbon capture, chemical looping combustion operated with a gaseous fuel. In order to analyze the results of the CFD simulations, two one-dimensional fluidized bed models have been formulated. The single-phase and bubble-emulsion models were applied to derive the average gas-bed and interphase mass transfer coefficients, respectively. In the analysis, the effects of various fluidized bed operation parameters, such as fluidization, velocity, particle and bubble diameter, reactor size, and chemical kinetics, on the heterogeneous mass transfer coefficients in the lower fluidized bed are evaluated extensively. The analysis shows that the fine-grid Eulerian CFD model can predict the heterogeneous mass transfer coefficients quantitatively with acceptable accuracy. Qualitatively, the CFD-based research of fluidized bed process revealed several new scientific results, such as parametrical relationships. The huge variance of seven orders of magnitude within the bed Sherwood numbers presented in the literature could be explained by the change of controlling mechanisms in the overall heterogeneous mass transfer process with the varied process conditions. The research opens new process-specific insights into the reactive fluidized bed processes, such as a strong mass transfer control over heterogeneous reaction rate, a dominance of interphase mass transfer in the fine-particle fluidized beds and a strong chemical kinetic dependence of the average gas-bed mass transfer. The obtained mass transfer coefficients can be applied in fluidized bed models used for various engineering design, reactor scale-up and process research tasks, and they consequently provide an enhanced prediction accuracy of the performance of fluidized bed processes.

A Project Portfolio Tool for Forecasting Small Projects Profitability

The case company in this study is a large industrial engineering company whose business is largely based on delivering a wide-range of engineering projects. The aim of this study is to create and develop a fairly simple Excel-based tool for the sales department. The tool’s main function is to estimate and visualize the profitability of various small projects. The study also aims to find out other possible and more long-term solutions for tackling the problem in the future. The study is highly constructive and descriptive as it focuses on the development task and in the creation of a new operating model. The developed tool focuses on estimating the profitability of the small orders of the selected project portfolio currently on the bidding-phase (prospects) and will help the case company in the monthly reporting of sales figures. The tool will analyse the profitability of a certain project by calculating its fixed and variable costs, then further the gross margin and operating profit. The bidding phase of small project is a phase that has not been covered fully by the existing tools within the case company. The project portfolio tool can be taken into use immediately within the case company and it will provide fairly accurate estimate of the profitability figures of the recently sold small projects.

Telahiomon tuotannon läpimenoajan ja laadun optimointi

Tämän diplomityön tarkoituksena on tunnistaa UPM Kymin telahiomon tuotannon läpimenoaikaan sekä laatuun vaikuttavia tekijöitä ja löytää keinot niiden optimoimiseksi, jotta hiontatuotannon kustannustehokkuus parantuisi. Tutkimusmenetelminä työssä käytetään Kymin telahiomon tuotannon läpimenoaikojen telakohtaista mittaamista ja hionnasta tehtyjen mittausraporttien, pinnoituksista ja hionnoista tehtyjen ostotilauksien sekä SAP R/3-toiminnanohjausjärjestelmästä saatavan kunnossapitodatan tutkintaa. Tiedon lähteenä on käytetty myös kirjallisuutta ja UPM henkilöstön sekä toimittajien haastatteluita. Muiden telahiomojen aikaansaamaan laatuun ja tuotannon läpimenoaikaan verrattuna Kymin telahiomon keskimääräiset hiontatuotannon läpimenoajat ovat telasta riippuen kaksinkertaisia tai jopa lähes nelinkertaisia, vaikka pinnankarheus jää osassa teloista alle asetetun tavoitteen. Telahiomojen muototoleransseissa ei ole niin merkittäviä eroja, mitkä selittäisivät Kymin pidemmät hiontatuotannon läpimenoajat. Tämän takia muototoleransseja ei ole päädytty muuttamaan työn aikana, mutta käyttökokemusten mukaan pinnankarheusvaatimusta voidaan laskea. Telahiontaprosessin muotohiontavaihe on suurin hiontatuotannon läpimenoaikaan ja kustannuksiin vaikuttava tekijä. Hiontamenetelmien ja hionta-arvojen optimoimisella, hiontatyökalujen lastuamiskyvyn ylläpitämisellä, telahiontatuotannon yliprosessoinnin ehkäisyllä ja laatutoleransseihin tyytymisellä voidaan lyhentää kymmeniä tunteja telahiomon tuotannon läpimenoaikaa. Mittausraporttien mukaan merkittävin muutos telahiontaprosessin kustannuksiin ja hiontatuotannon läpimenoaikaan saadaan noudattamalla laatutoleransseja. Telojen kunnossapitoon liittyviä kustannuksia syntyy turhaan lisää, kun vaihdetaan ja hiotaan käyttökelpoisia teloja sekä uudelleen pinnoitetaan teloja, joiden pinnoitepaksuus on vielä riittävä. Pinnoitepaksuuden seurannalla voidaan minimoida telojen ennenaikaiset uudelleenpinnoitukset. Mittalaitteiden avulla pystyy optimoimaan telojen hiontavälit. Hiontavälien optimointi lyhentää myös hiontajonoa. Tällöin voidaan hyödyntää suunnitellun hiontajärjestyksen tuomia etuja tehokkaammin ja saavuttaa nopeampia tuotannon läpimenoaikoja.

Federal-provincial relations and the environment : attaining sustainable development through cooperation /

A study of intergovernmental relations in the area of the environment will determine whether the current Canadian federal structure represents a dangerous impediment to the promotion of sustainable development. This paper examines the interjurisdictional quagmire that has developed from the fact that authority over the environment is a functionally concurrent field for the two orders of government. A history of federal-provincial relations in the area of environmental protection is followed by an analysis of the advantages and disadvantages associated with competitive and cooperative federalism. For the purpose of this paper, cooperative federalism is characterized by the presence of a formal institutional system to facilitate interaction between politicians and bureaucrats from both orders of government. Competitive federalism is defined as a system that lacks a formal institutional structure to promote discussion and coordination between federal and provincial officials in a specific field of interest. Last, I examine thirty sustainable development issues following the structure established in Agenda 21 to determine the impact of the present federal system on the development of these objectives. This study concludes that Canadian federalism is not a dangerous impediment to the promotion of sustainable development. Cooperative federalism in a form that does not eliminate the ability of governments to revert to competition promotes the emergence of an institutional system that facilitates information-sharing and discussion between the two orders of government, thus leading to coordinated efforts in the field of the environment. Respect for the current division of powers in this area is also essential to the cohesiveness of Canadian society. Policy-makers and advocates for a sustainable society should focus on working within the present system.

Phonon dispersion curves and atomic mean square displacement for several fcc and bcc materials

The atomic mean square displacement (MSD) and the phonon dispersion curves (PDC's) of a number of face-centred cubic (fcc) and body-centred cubic (bcc) materials have been calclllated from the quasiharmonic (QH) theory, the lowest order (A2 ) perturbation theory (PT) and a recently proposed Green's function (GF) method by Shukla and Hiibschle. The latter method includes certain anharmonic effects to all orders of anharmonicity. In order to determine the effect of the range of the interatomic interaction upon the anharmonic contributions to the MSD we have carried out our calculations for a Lennard-Jones (L-J) solid in the nearest-neighbour (NN) and next-nearest neighbour (NNN) approximations. These results can be presented in dimensionless units but if the NN and NNN results are to be compared with each other they must be converted to that of a real solid. When this is done for Xe, the QH MSD for the NN and NNN approximations are found to differ from each other by about 2%. For the A2 and GF results this difference amounts to 8% and 7% respectively. For the NN case we have also compared our PT results, which have been calculated exactly, with PT results calculated using a frequency-shift approximation. We conclude that this frequency-shift approximation is a poor approximation. We have calculated the MSD of five alkali metals, five bcc transition metals and seven fcc transition metals. The model potentials we have used include the Morse, modified Morse, and Rydberg potentials. In general the results obtained from the Green's function method are in the best agreement with experiment. However, this improvement is mostly qualitative and the values of MSD calculated from the Green's function method are not in much better agreement with the experimental data than those calculated from the QH theory. We have calculated the phonon dispersion curves (PDC's) of Na and Cu, using the 4 parameter modified Morse potential. In the case of Na, our results for the PDC's are in poor agreement with experiment. In the case of eu, the agreement between the tlleory and experiment is much better and in addition the results for the PDC's calclliated from the GF method are in better agreement with experiment that those obtained from the QH theory.

An anharmonic contribution to the Helmholtz free energy O(lambda 6)

The anharmonic contributions of order A6 to the Helmholtz free energy for a crystal in which every atom is on a site of inversion symmetry, have been evaluated The cor~esponding diagrams in the various orders of the perturbation theory have been presented The validity of the expressions given is for high temperatures. Numerical calculations for the diagrams which contribute to the free energy have been worked out for a nearest-n~ighbour central-force model of a facecentered cubic lattice in the high-temperature limit and in the leading term and the Ludwig approximations. The accuracy of the Ludwig approximation in evaluating the Brillouin-zone sums has been investigated. Expansion for all diagrams in the high-temperature limit has been carried out The contribution to the specific heat involves a linear as well as cubic term~ We have applied Lennard-Jones, Morse and Exponential 6 types of potentials. A comparison between the contribution to the free energy of order A6 to that of order A4 has been made.

Laura Dexter letter, commenting on the McLeod murder trial, October 5, 1841

Alexander McLeod was Deputy Sheriff of the Niagara District during the Rebellion of 1837-38 in Upper Canada. On December 24, 1837, he became aware of a scheme by the rebels to use the American steamboat Caroline to provide supplies to William Lyon Mackenzie and his followers on Navy Island in the Niagara River. McLeod notified the authorities in Upper Canada about the situation. A few days later, on December 29, Commodore Andrew Drew led a band of men, including McLeod, to the American side, where the Caroline was moored at Schlosser’s Wharf. A scuffle ensued, in which American Amos Durfee was killed. The Caroline was then released from its moorings, set on fire, and drifted downstream before sinking. Many Americans viewed the incident as a violation of their sovereignty. Tensions between the United States and England were already strained over a boundary dispute between Maine and New Brunswick, and the situation with the Caroline further escalated the tension. McLeod was subsequently arrested in November, 1840 in Lewiston, NY and indicted for arson and murder. The British foreign secretary, Lord Palmerston, insisted that McLeod be released and could not be held personally responsible for the incident, as he was acting on orders from authorities in Canada. Eventually, McLeod was acquitted.

Flippable Pairs and Subset Comparisons in Comparative Probability Orderings and Related Simple Games

We show that every additively representable comparative probability order on n atoms is determined by at least n - 1 binary subset comparisons. We show that there are many orders of this kind, not just the lexicographic order. These results provide answers to two questions of Fishburn et al (2002). We also study the flip relation on the class of all comparative probability orders introduced by Maclagan. We generalise an important theorem of Fishburn, Peke?c and Reeds, by showing that in any minimal set of comparisons that determine a comparative probability order, all comparisons are flippable. By calculating the characteristics of the flip relation for n = 6 we discover that the regions in the corresponding hyperplane arrangement can have no more than 13 faces and that there are 20 regions with 13 faces. All the neighbours of the 20 comparative probability orders which correspond to those regions are representable. Finally we define a class of simple games with complete desirability relation for which its strong desirability relation is acyclic, and show that the flip relation carries all the information about these games. We show that for n = 6 these games are weighted majority games.

L'intervention du juge canadien avant et durant un arbitrage commercial international

"Thèse présentée à la Faculté des études supérieures de l'Université de Montréal en vue de l'obtention du grade de Docteur en droit (LL.D.) et à l'Université Panthéon-Assas (Paris II) Droit-économie-Sciences Sociales en vue de l'obtention du grade de Docteur en droit (Arrêté du 30 mars 1992 modifié par l'arrêté du 25 avril 2002)"