Carbon Nanotubes as Material for Supercapacitor Electrodes

Electrochemical double-layer supercapacitors have an intermediate position between rechargeable batteries, which can store high amounts of energy, and dielectric capacitors, which have high output power. Supercapacitors are widely suggested to be used in automobiles (recuperation during braking, facilitate engine starting, electric stabilization of the system), industry (forklifts, elevators), hybrid off-road machinery and also in consumer electronics. Supercapacitor electrodes require highly porous material. Typically, activated carbon is used. Specific surface area of activated carbon is approximately 1000 m2 per gram. Carbon nanotubes represent one of prospective materials. According to numerous studies this material allows to improve the properties of supercapacitors. The task of this Master‘s Thesis was to test multiwalled carbon nanotubes and become confident with the testing methods.

Value added logistics in supply and demand chain : COSTFIX : New operation model for maintenance material logistics in paper industry

This research report illustrates and examines new operation models for decreasing fixed costs and transforming them into variable costs in the field of paper industry. The report illustrates two cases – a new operation model for material logistics in maintenance and an examination of forklift truck fleet outsourcing solutions. Conventional material logistics in maintenance operation is illustrated and some problems related to conventional operation are identified. A new operation model that solves some of these problems is presented including descriptions of procurement and service contracts and sources of added value. Forklift truck fleet outsourcing solutions are examined by illustrating the responsibilities of a host company and a service provider both before and after outsourcing. The customer buys outsourcing services in order to improve its investment productivity. The mechanism of how these services affect the customer company’s investment productivity is illustrated.

Fast pyrolysis in circulating fluidized bed: feasibility study

Today the limitedness of fossil fuel resources is clearly realized. For this reason there is a strong focus throughout the world on shifting from fossil fuel based energy system to biofuel based energy system. In this respect Finland with its proven excellent forestry capabilities has a great potential to accomplish this goal. It is regarded that one of the most efficient ways of wood biomass utilization is to use it as a feedstock for fast pyrolysis process. By means of this process solid biomass is converted into liquid fuel called bio-oil which can be burnt at power plants, used for hydrogen generation through a catalytic steam reforming process and as a source of valuable chemical compounds. Nowadays different configurations of this process have found their applications in several pilot plants worldwide. However the circulating fluidized bed configuration is regarded as the one with the highest potential to be commercialized. In the current Master’s Thesis a feasibility study of circulating fluidized bed fast pyrolysis process utilizing Scots pine logs as a raw material was conducted. The production capacity of the process is 100 000 tonne/year of bio-oil. The feasibility study is divided into two phases: a process design phase and economic feasibility analysis phase. The process design phase consists of mass and heat balance calculations, equipment sizing, estimation of pressure drops in the pipelines and development of plant layout. This phase resulted in creation of process flow diagrams, equipment list and Microsoft Excel spreadsheet that calculates the process mass and heat balances depending on the bio-oil production capacity which can be set by a user. These documents are presented in the current report as appendices. In the economic feasibility analysis phase there were at first calculated investment and operating costs of the process. Then using these costs there was calculated the price of bio-oil which is required to reach the values of internal rate of return of 5%, 10%, 20%, 30%, 40%, and 50%.

The effects of location, feedstock availability, and supply-chain logistics on the greenhouse gas emissions of forest-biomass energy utilization in Finland

Forest biomass represents a geographically distributed feedstock, and geographical location affects the greenhouse gas (GHG) performance of a given forest-bioenergy system in several ways. For example, biomass availability, forest operations, transportation possibilities and the distances involved, biomass end-use possibilities, fossil reference systems, and forest carbon balances all depend to some extent on location. The overall objective of this thesis was to assess the GHG emissions derived from supply and energy-utilization chains of forest biomass in Finland, with a specific focus on the effect of location in relation to forest biomass’s availability and the transportation possibilities. Biomass availability and transportation-network assessments were conducted through utilization of geographical information system methods, and the GHG emissions were assessed by means of lifecycle assessment. The thesis is based on four papers in which forest biomass supply on industrial scale was assessed. The feedstocks assessed in this thesis include harvesting residues, smalldiameter energy wood and stumps. The principal implication of the findings in this thesis is that in Finland, the location and availability of biomass in the proximity of a given energyutilization or energy-conversion plant is not a decisive factor in supply-chain GHG emissions or the possible GHG savings to be achieved with forest-biomass energy use. Therefore, for the greatest GHG reductions with limited forest-biomass resources, energy utilization of forest biomass in Finland should be directed to the locations where most GHG savings are achieved through replacement of fossil fuels. Furthermore, one should prioritize the types of forest biomass with the lowest direct supply-chain GHG emissions (e.g., from transport and comminution) and the lowest indirect ones (in particular, soil carbon-stock losses), regardless of location. In this respect, the best combination is to use harvesting residues in combined heat and power production, replacing peat or coal.

Critical aspects on the behavior of material from the mechanical tool-workpiece interaction in single point diamond turning

Some material aspects such as grain size, purity and anisotropy exert an important influence on surface quality, especially in single point diamond turning. The aim of this paper is to present and discuss some critical factors that can limit the accuracy of ultraprecision machining of non-ferrous metals and to identify the effects of them on the cutting mechanism with single point diamond tools. This will be carried out through observations of machined surfaces and chips produced using optical and scanning electron microscopy. Solutions to reduce the influence of some of these limiting factors related with the mechanism of generation of mirror-like surfaces will be discussed.

Kestävä kehitys ja yritysvastuu – yritysvastuun raportointi suomalaisissa pörssiyrityksissä

Yritysvastuun ja kestävän kehityksen merkitys yritystoiminnassa kasvaa jatkuvasti tuoden mukanaan myös uusia vaatimuksia yrityksen toiminnalle ja raportoinnille. Tämän tutkimuksen tavoitteena on antaa kokonaiskuva yritysvastuun raportoinnista suurissa suomalaisessa pörssiyhtiössä. Tutkimuksessa selvitetään myös GRI:n merkitystä raportoinnissa ja sen taloudellisten indikaattoreiden hyödyntämistä. Tutkimuksessa analysoidaan tarkemmin yritysvastuun taloudellista ulottuvuutta, mittareita ja tavoitteita ja tarkastellaan, onko niissä havaittavissa toimialakohtaisia eroja. Tutkimus on kvalitatiivinen, mutta siinä on hyödynnetty myös määrällistä analyysiä. Tutkimuksen empiirinen aineisto koostuu 26 suuren suomalaisen pörssiyhtiön vuoden 2010 yritysvastuuraporteista ja vuosikertomuksista. Suurin osa kohdeyrityksistä raportoi yritysvastuusta, mutta raportoinnin laajuudessa on eroja. Yritykset julkaisevat toteumatietoja laajemmin kuin tavoitteita. Tavoitepoikkeamien analysointi on vielä vähäistä. Rahoitustoimiala raportoi yritysvastuusta muita toimialoja vähemmän. Kaksi kolmasosaa tutkimuksen kohdeyrityksistä ilmoitti soveltavansa GRI:n mukaista raportointioh-jeistoa. Yritysten väliset erot raportointiohjeiston soveltamisen välillä ovat suuret. Merkittäviä toimialakohtaisia eroja yritysvastuun tai taloudellisen vastuun raportoinnissa ei ole.

Unidirectional fiber-reinforced composite as an oral implant abutment material: Experimental studies of E-glass fiber/BisGMA-TEGDMA polymer in vitro

Fiber-reinforced composites (FRCs) are a new group of non-metallic biomaterials showing a growing popularity in many dental and medical applications. As an oral implant material, FRC is biocompatible in bone tissue environment. Soft tissue integration to FRC polymer material is unclear. This series of in vitro studies aimed at evaluating unidirectional E-glass FRC polymer in terms of mechanical, chemical, and biological properties in an attempt to develop a new non-metallic oral implant abutment alternative. Two different types of substrates were investigated: (a) Plain polymer (BisGMA 50%–TEGDMA 50%) and (b) Unidirectional FRC. The mechanical behavior of high fiber-density FRCs was assessed using a three-point bending test. Surface characterization was performed using scanning electron and spinning disk confocal microscopes. The surface wettability/energy was determined using sessile drop method. The blood response, including blood-clotting ability and platelet morphology was evaluated. Human gingival fibroblast cell responses - adhesion kinetics, adhesion strength, and proliferation activity - were studied in cell culture environment using routine test conditions. A novel tissue culture method was developed and used to evaluate porcine gingival tissue graft attachment and growth on the experimental composite implants. The analysis of the mechanical properties showed that there is a direct proportionality in the relationship between E-glass fiber volume fraction and toughness, modulus of elasticity, and load bearing capacity; however, flexural strength did not show significant improvement when high fiber-density FRC is used. FRCs showed moderate hydrophilic properties owing to the presence of exposed glass fibers on the polymer surface. Blood-clotting time was shorter on FRC substrates than on plain polymer. The FRC substrates also showed higher platelet activation state than plain polymer substrates. Fibroblast cell adhesion strength and proliferation rate were highly pronounced on FRCs. A tissue culture study revealed that gingival epithelium and connective tissue established an immediate close contact with both plain polymer and FRC implants. However, FRC seemed to guide epithelial migration outwards from the tissue/implant interface. Due to the anisotropic and hydrophilic nature of FRC, it can be concluded that this material enhances biological events related with soft tissue integration on oral implant surface.

Defining of the material models for stainless steels to be used in FE modeling

The aim of this work is to study the results of tensile tests for austenitic stainless steel type 304 and make accurate FE-models according to the results of the tests. Tensile tests were made at Central Research Institute of Structural Material, Prometey at Saint Petersburg and Mariyenburg in Russia. The test specimens for the tensile tests were produced at Lappeenranta University of Technology in a Laboratory of Steel Structures. In total 4 different tests were made, two with base material specimens and two with transverse butt weld specimens. Each kind of a specimen was tested at room temperature and at low temperature. By comparing the results of room and low temperature tests of similar test specimen we get to study the results of work hardening that affect the austenitic steels at below room temperature. The produced specimens are to be modeled accurately and then imported for nonlinear FEM- analyzing. Using the data gained from the tensile tests the aim is to get the models work like the specimens did during the tests. By using the analyzed results of the FE-models the aim is to calculate and get the stress-strain curves that correspond to the results acquired from the tensile tests.

Mineraalisen rakennusjätteen hyötykäyttö maarakentamisessa

Työn tavoitteena on osoittaa betonimurskeen ympäristökelpoisuus maarakennuskäytössä sekä vertailla betonimurskeen ja luonnonmateriaalien elinkaaren aikaisia ympäristövaikutuksia maarakentamisessa. Teoriaosassa käsitellään betonimurskeen maarakennuskäyttöön vaikuttavaa lainsäädäntöä ja sen mahdollisia ympäristövaikutuksia. Lisäksi käydään läpi neitseellisten maarakennusmate-riaalien otosta aiheutuvia ympäristövaikutuksia. Työn kokeellinen osa koostuu kahdesta osasta: materiaalien haitallisten aineiden liukoisuuden mää-rityksistä ja elinkaariarvioinnista. Liukoisuuden määritykset tehtiin kenttäkokeina luonnonolosuhteissa Lahden tiede- ja yrityspuisto Oy:n Jokimaan pilot-luokan maaperätutkimuskeskuksessa. Lisäksi liukoisuudet määritettiin laboratoriossa valtioneuvoston asetuksen eräiden jätteiden hyödyntämisestä maarakentamisessa vaatimusten mukaisesti. Elinkaariarvioinnissa vertailtiin betonimursketta neitseellisiin maarakennusmateriaaleihin skenaarioissa, jotka sisälsivät materiaalin valmistuksen ja kuljetuksen käyttökohteeseen. Neitseellisiä materiaaleja käytettäessä oletettiin, että betoni loppusijoitetaan kaatopaikalle. Elinkaariarvioinnissa käytettiin Gabi-elinkaarimallinnusohjelmaa ja skenaarioita vertailtiin hiilidioksidiekvivalenttipäästöihin. Lisäksi elinkaariarviointiin otettiin mukaan vielä kehitysvaiheessa oleva menetelmä maankäytön indikaattoreiden määrittämiseen. Menetelmällä tutkittiin soranoton vaikutusta soraharjun maaperän laadulle ennen ja jälkeen soranoton. Tulokseksi liukoisuuden määrityksistä saatiin, että betonimurskekerroksen läpi suotautuneen sade-veden pH nousee hyvin emäksiseksi. pH:n nousu vaikuttaisi korreloivan positiivisesti tiettyjen metallien liukoisuuteen. Huomattavaa on, että kenttäkokeiden liukoisuudet ja laboratoriossa määritetyt liukoisuudet poikkesivat joltain osin toisistaan. Elinkaaritarkastelussa hiilidioksidiekvivalentti päästöjen suhteen suurin päästö aiheutuu, jos betoni loppusijoitetaan kaatopaikalle hyötykäytön sijaan. Maaperän laadun muutoksien määrittämisen menetelmä ei vielä ole käyttökelpoinen lähtötietojen yksinkertaistuksien ja puutteiden takia. Betonimurskeen hyötykäyttö maarakentamisessa ei aiheuta merkittäviä ympäristövaikutuksia, kun altistus vedelle minimoidaan. Lisäksi hyötykäyttö on suositeltava vaihtoehto loppusijoitukselle kaatopaikan rakentamisen ja käytön aiheuttamien ympäristövaikutusten takia.

Potential utilization ways of recovered chemical products from digestate

The study evaluates the potential application of chemical substances, obtained from biogas plants` by-products. Through the anaerobic digestion process with biogas the large amount of digestate is produced. This digestate mainly consists on the organic matter with the high concentration of nutrients such as nitrogen and phosphorus. During ammonia stripping and phosphorus precipitation the products- ammonia water, ammonium sulfate, ammonium nitrate, ferrous phosphate, aluminum phosphate, calcium phosphate and struvite can be recovered. These chemicals have potential application in different industrial sectors. According to Finnish market and chemicals properties, the most perspective industrial applications were determined. Based on the data, obtained through the literature review and market study, the ammonia water was recognized as a most perspective recovered substances. According to interview provided among Finnish companies, ammonia water is used for flue gas treatment in SNCR technology. This application has a large scale in the framework of Finnish industrial sectors. As well nitrogen with phosphorous can be used as a source of nutrients in the biological wastewater treatment plants of paper mills.

Ensuring the efficient utilization of Business Intelligence

In recent years, chief information officers (CIOs) around the world have identified Business Intelligence (BI) as their top priority and as the best way to enhance their enterprises competitiveness. Yet, many enterprises are struggling to realize the business value that BI promises. This discrepancy causes important questions, for example: what are the critical success factors of Business Intelligence and, more importantly, how it can be ensured that a Business Intelligence program enhances enterprises competitiveness. The main objective of the study is to find out how it can be ensured that a BI program meets its goals in providing competitive advantage to an enterprise. The objective is approached with a literature review and a qualitative case study. For the literature review the main objective populates three research questions (RQs); RQ1: What is Business Intelligence and why is it important for modern enterprises? RQ2: What are the critical success factors of Business Intelligence programs? RQ3: How it can be ensured that CSFs are met? The qualitative case study covers the BI program of a Finnish global manufacturer company. The research questions for the case study are as follows; RQ4: What is the current state of the case company’s BI program and what are the key areas for improvement? RQ5: In what ways the case company’s Business Intelligence program could be improved? The case company’s BI program is researched using the following methods; action research, semi-structured interviews, maturity assessment and benchmarking. The literature review shows that Business Intelligence is a technology-based information process that contains a series of systematic activities, which are driven by the specific information needs of decision-makers. The objective of BI is to provide accurate, timely, fact-based information, which enables taking actions that lead to achieving competitive advantage. There are many reasons for the importance of Business Intelligence, two of the most important being; 1) It helps to bridge the gap between an enterprise’s current and its desired performance, and 2) It helps enterprises to be in alignment with key performance indicators meaning it helps an enterprise to align towards its key objectives. The literature review also shows that there are known critical success factors (CSFs) for Business Intelligence programs which have to be met if the above mentioned value is wanted to be achieved, for example; committed management support and sponsorship, business-driven development approach and sustainable data quality. The literature review shows that the most common challenges are related to these CSFs and, more importantly, that overcoming these challenges requires a more comprehensive form of BI, called Enterprise Performance Management (EPM). EPM links measurement to strategy by focusing on what is measured and why. The case study shows that many of the challenges faced in the case company’s BI program are related to the above-mentioned CSFs. The main challenges are; lack of support and sponsorship from business, lack of visibility to overall business performance, lack of rigid BI development process, lack of clear purpose for the BI program and poor data quality. To overcome these challenges the case company should define and design an enterprise metrics framework, make sure that BI development requirements are gathered and prioritized by business, focus on data quality and ownership, and finally define clear goals for the BI program and then support and sponsor these goals.

The many faces of strikes : attitudes towards industrial action by labour, management and human resources

Strikes provide a current, fresh but also a seldom-addressed issue to study from economic sciences perspective. This study provides to filling this research gap by trying to identify attitudes towards strikes that can be found inside organizations. The research problem this study then sets out to answer is: “What kinds of attitudes exist inside organizations towards industrial actions and how attitudes vary between labour, management and human resources?” This study has been planned with a view to test how qualitative attitudinal research, as a method, is suited to studying a phenomenon such as strike. At the heart of this research approach lies an assumption linked to rhetoric social psychology, that attitude is a phenomenon that can be identified in argumentation. For this research 10 semi-structured interviews in 4 organizations were conducted utilizing statements and pictures as stimulants for discussion. The material was transcribed and analysed following the two levels, categorical and interpretive, demanded by the chosen method. Altogether five attitudes were discovered; three of them negative, one indifferent and one positive by nature. The negative attitudes of unfairness, failure and personification towards strikes represented the side of strikes that was perhaps the most anticipated, portraying the contradictions between employees and employer. The attitude of ordinariness, which portrayed indifference, and the positive attitude of change however, were more unanticipated findings. They reflect shared understanding and trust between conflict parties. The utilization of qualitative attitudinal approach to study strikes was deemed successful. The results of this study support prior literature on workplace conflicts for example in regards of the definition of conflict and typologies conflicts. In addition the multifaceted nature of strikes can be perceived as one statement supported by this study. It arises in the nature of the attitudes, the diversity of discussion themes during the interviews as well as in the extent of possible theories to apply.

Crowdfunding and its utilization for startup finance in Finland – factors of a successful campaign

This thesis studies crowdfunding with qualitive methods to introduce the phenomenon as well as provide guidance to those interested in its utilization. Knowledge and ideas were gathered form several sources, from academic literature to commercial media and expert interviews. Crowdfunding has already demonstrated its ability to impact the startup scene but is still far from being utilized to its full extent, especially in Finland, where even its legality has been questioned. Crowd financing can provide capital to entrepreneurs who might not otherwise be able to obtain funding as well as enable crowdsourcing the funders in several ways. A successful campaign, however, requires a wealth of knowledge on the subject, careful planning and hard work on the implementation. The thesis will provide most benefit to entrepreneurs who are considering the use of this new form of finance, but should also be of value for investors, academics, politicians and everyone else interested in the subject.

Uuden tiedon hankinta ja hyödyntäminen organisaation innovaatioprosesseissa

Tämän tutkimuksen tavoitteena oli tutkia, miten uuden ja erityisesti tulevaisuuteen suuntautuvan tiedon hankintaa ja hyödyntämistä organisaatioiden innovaatioprosesseissa voidaan tarkastella ja jäsentää sekä kehittää avoimen innovaatioteorioiden pohjalta. Tulevaisuustiedon järjestelmällinen hyödyntäminen on yhä tärkeämmässä asemassa 2010-luvun organisaatioiden innovatiivisuuden ja kilpailukyvyn kannalta. Tämä on abstraktin luonteensa vuoksi erittäin haasteellista mutta teoriassa mahdollista, jos uuden tiedon liittämisestä organisaation käyttöön on tehty tärkeä ja selkeä osa koko organisaation strategiaa. Uuden tiedon tehokkaaseen käsittelemiseen ja siirtämiseen organisaatiossa tarvitaan suunnitelmallista ennakointitoimintaa, sosiaalisia sovittelumekanismeja ja rakentavaa yhteistyötä myös ulkopuolisten toimijoiden kanssa. Valitun teoriakehyksen pohjalta laadittiin yksinkertaistettu kyselytutkimus, johon oli liitetty absorptiiviseen kapasiteettiin, visionääriseen kyvykkyyteen, ennakointitoimintaan ja uuden tiedon käsittelyyn liittyviä käsitteitä. Kyselyn tarkoituksena oli myös tarjota organisaatiolle mahdollisuus tarkastella nykyistä tilaansa uuden tiedon monivaiheisen hyödyntämisen kannalta. Kyselytutkimus lähetettiin suomalaisille teollisuusyrityksille ja saatuja vastauksia käytettiin empiirisenä aineistona. Empiiristä aineistoa tarkasteltiin kvantitatiivisin menetelmän ja tuloksista saatiin hyödyllistä tietoa yritysten toiminnasta käytännöntasolta.