Modelling of the kinetics of municipal solid waste composting in full-scale mechanical-biological treatment plants

A thesis submitted in fulfilment of the requirements for the Degree of Doctor of Philosophy in Sanitary Engineering in the Faculty of Sciences and Technology of the New University of Lisbon

Clinical and laboratory findings of disseminated Mycobacterium avium complex infection (DMAC) in a pair matched case-control study

A pair matched case/control study was conducted from January 1991 to 30 June 1992 in order to define clinical and laboratory findings associated with DMAC infection in AIDS patients. Since DMAC infection is usually associated with advanced immunodeficiency, and therefore also with other opportunistic illnesses, in addition to the number of CD4+ lymphocytes, cases and controls were matched using the following criteria: date of AIDS diagnosis and antiretroviral therapy, number and severity of associated opportunistic infections and, whenever possible, type of Pneumocystis carinii prophylaxis, age and gender, in this order of relevance. Cases (defined as patients presenting at least one positive culture for MAC at a normally sterile site) and controls presented CD4+ lymphocyte counts below 50 cel/mm3. A significantly higher prevalence of general, digestive and respiratory signs, increased LDH levels, low hemoglobin levels and CD4+ cell counts were recorded for cases when compared to controls. Increases in gGT and alkaline phosphatase levels seen in cases were also recorded for controls. In conclusion, the strategy we used for selecting controls allowed us to detect laboratory findings associated to DMAC infection not found in other advanced immunossupressed AIDS patients without DMAC.

Contribution to the laboratory diagnosis of human cryptosporidiosis

Human cryptosporidiosis is an infection caused by Cryptosporidium spp, a coccidial protozoan of emergencial pathogenicity and responsible for severe and prostrating watery diarrhea, mainly in immunocompromised patients. Smears of stools submitted to concentration and staining by carbol fuchsin technique has been used in our laboratory as a diagnostic procedure for cryptosporidiosis. The long time observing the smears in the microscope due to the small size of the forms and the low contrast of the staining led us to introduce some modifications in the original protocol for the acid-fast staining. The smears were treated with the carbol fuchsin solution for 3 minutes as recommended by LENNETTE et al., 1985 and the solution of the ethyl alcohol 70%-chloride acid 0.5% was used instead of the ethyl alcohol-sulfuric acid 5% recommended by HENRIKSEN & POHLENZ, 1981. Smears were treated with the discoloration solution for 2 minutes. These modifications promoted a better washing out of the excess of carbol fuchsin therefore increasing the dye efficiency. In such conditions, the visualization of protozoan oocysts on the slides examined became easier. They were observed by the contrast of their intense pink-reddish pigmentation against the blue background. It's worthwhile to emphasize that these modifications offer advantages when time and accuracy are concerned.

Condicionamento acústico e certificação energética de edifícios

O presente relatório desenvolvido no âmbito do estágio curricular realizado na empresa – ASL & Associados, com duração de seis meses, tem como objetivo a elaboração e desenvolvimento de estudos acústicos de edifícios e elaboração de certificados energéticos de edifícios existentes. Inicialmente, será feita uma descrição da empresa acolhedora expondo a sua missão, valores e o portfólio abarcando projetos e revisão de projetos, certificação energética, ensaios acústicos, gestão e fiscalização de empreendimentos. As atividades desenvolvidas no estágio englobam a certificação energética de edifícios existentes aplicando a nova regulamentação térmica (REH), apresentando as simplificações de cálculo aplicadas a edifícios existentes e dois exemplos específicos de uma fração autónoma e um edifício unifamiliar. No campo da acústica foram estudados três edifícios, um habitacional, um misto e um de serviços. Para o condicionamento acústico dos casos de estudo serão aplicados métodos de cálculo utilizados na empresa e um método de cálculo para avaliação e classificação da qualidade acústica, o qual foi desenvolvido pelo Laboratório Nacional de Engenharia Civil – LNEC. Por fim, foram elaborados as ponderações sobre a experiência vivida, como considerações sobre os resultados obtidos tendo em conta os objetivos propostos para o desenvolvimento do estágio.

The clothing industry as a globalized sector: implications for work organisation, quality of work and job content

The clothing sector in several countries is still seen, in many aspects as a traditional sector with some average characteristics, nevertheless is a very important sector in terms of labour market. Globalization and de-localization are having a strong impact in the organisation of work and in occupational careers. Very few companies are able to keep a position in the market without changes in organisation of work and workers, founding different ways to face this reality according to size, capital and position. We could find two main paths: one where companies outsource production to another territory, close and/ or dismissal the workers; other path, where companies up skilled their capacities. This paper will present some results from the European project WORKS – Work organisation and restructuring in the knowledge society (6th Framework Programme), focusing the Portuguese case studies in several clothing companies in a comparative analysis with some other European countrie

Foresight studies on work in the knowledge society: a 2nd international conference at UNL

The 2nd International Conference on "Foresight Studies on Work in the Knowledge Society" was organised by IET, the Research Centre on Enterprise and Work Innovation, at the Faculty of Sciences and Technology of "Universidade Nova de Lisboa" (FCT-UNL), and took place on January 26 and 27 of 2009 with the support of the European project WORKS-Work Organisation Re-structuring in the Knowledge Society (financed by the European Commission, and co-ordinated by HIVA Leuven)

Comparison of different methods for work accidents investigation in hospitals: A Portuguese case study

BACKGROUND: The hospital environment has many occupational health risks that predispose healthcare workers to various kinds of work accidents. OBJECTIVE: This study aims to compare different methods for work accidents investigation and to verify their suitability in hospital environment. METHODS: For this purpose, we selected three types of accidents that were related with needle stick, worker fall and inadequate effort/movement during the mobilization of patients. A total of thirty accidents were analysed with six different work accidents investigation methods. RESULTS: The results showed that organizational factors were the group of causes which had the greatest impact in the three types of work accidents. CONCLUSIONS: The methods selected to be compared in this paper are applicable and appropriate for the work accidents investigation in hospitals. However, the Registration, Research and Analysis of Work Accidents method (RIAAT) showed to be an optimal technique to use in this context.

Botulism: a laboratory investigation on biological and food samples from cases and outbreaks in Brazil (1982-2001)

Laboratory investigation of botulism from 1982 to 2001 confirmed the occurrence of eight positive outbreaks/cases of botulism in Brazil. From those, type A botulism was observed in seven of them. Biological material of one case (serum and feces) was positive in the first step of the bioassay, but the amount of sample was not sufficient for typification. One of the outbreaks that occurred in 2001 was negative for botulinum toxin in samples of serum, gastric washing and feces, collected eight days before the onset of the symptoms in the affected person who was clinically diagnosed as presenting the disease. Other two cases presenting compatible clinical diagnoses presented negative results. However, in those cases, the collection of samples was (1) after antiserum administration or (2) later than eight days of the onset of symptoms. Investigation was performed by mouse bioassay, as described in the Compendium of Methods for the Microbiological Examination of Foods (compiled by American Public Health Association - APHA)11, using specific antiserum from Centers for Disease Control (CDC), USA.

The influence of task design on upper limb muscles fatigue during low-load repetitive work: A systematic review

Ergonomic interventions such as increased scheduled breaks or job rotation have been proposed to reduce upper limb muscle fatigue in repetitive low-load work. This review was performed to summarize and analyze the studies investigating the effect of job rotation and work-rest schemes, as well as, work pace, cycle time and duty cycle, on upper limb muscle fatigue. The effects of these work organization factors on subjective fatigue or discomfort were also analyzed. This review was based on relevant articles published in PubMed, Scopus and Web of Science. The studies included in this review were performed in humans and assessed muscle fatigue in upper limbs. 14 articles were included in the systematic review. Few studies were performed in a real work environment and the most common methods used to assess muscle fatigue were surface electromyography (EMG). No consistent results were found related to the effects of job rotation on muscle activity and subjective measurements of fatigue. Rest breaks had some positive effects, particularly in perceived discomfort. The increase in work pace reveals a higher muscular load in specific muscles. The duration of experiments and characteristics of participants appear to be the factors that most have influenced the results. Future research should be focused on the improvement of the experimental protocols and instrumentation, in order to the outcomes represent adequately the actual working conditions. Relevance to industry: Introducing more physical workload variation in low-load repetitive work is considered an effective ergonomic intervention against muscle fatigue and musculoskeletal disorders in industry. Results will be useful to identify the need of future research, which will eventually lead to the adoption of best industrial work practices according to the workers capabilities.

Clinical and laboratory findings of Plasmodium vivax malaria in Colombia, 2001

A descriptive study was carried out in 104 patients with Plasmodium vivax malaria, from the region of Turbo (Antioquia, Colombia). Clinical features and levels of hemoglobin, glycemia, serum bilirubin, alanine-aminotransferase (ALT), aspartate-aminotransferase (AST), creatinine and complete blood cell profile were established. 65% of the studied individuals were men and their mean age was 23. Of all individuals 59% had lived in the region for > 1 year and 91% were resident in the rural area. 42% were farmers and 35% had a history of malaria. The mean parasitaemia was 5865 parasites/mm³. The evolution of the disease was short (average of 4.0 days). Fever, headache and chills were observed simultaneously in 91% of the cases while the most frequent signs were palmar pallor (46%), jaundice (15%), hepatomegaly (17%), and spleen enlargement (12%). Anemia was found in 39% of the women and in 51% of the men, 8% of individuals had thrombocytopaenia and 41% had hypoglycemia.

Design and Development of a Solar Dryer for Microalgae Retrieval - An EPS@ISEP 2013 Spring Project

Currently excessive fossil fuel consumption has become a serious problem. People are searching for new solutions of energy production and there are several options to obtain alternative sources of energy without further devastating the already destroyed environment. One of these solutions is growing microalgae, from which biodiesel can be obtained. The microalgae production is a growing business because of its many useful compounds. In order to collect these compounds microalgae must first be harvested and then dried. Nowadays the solutions used for drying use too much energy and therefore are too expensive and not sustainable. The goal of this project, one of the possible choices during the EPS@ISEP 2013 Spring, was to develop a solar microalgae dryer. The multinational team involved in its development was composed of five students, from distinct countries and fields of study, and was the responsible for designing a solar microalgae dryer prototype for the microalgae laboratory of the chemical engineering department at ISEP, suitable for future tests and incorporating control process (in order not to destroy the microalgae during the drying process). The solar microalgae dryer was built to work as a distiller that gets rid of the excess water from the microalgae suspension. This paper presents a possible solution for this problem, the steps to create the device to harvest the microalgae by drying them with the use of solar energy (also used as an energy source for the solar dryer control system), the technologies used to build the solar microalgae dryer, and the benefits it presents compared to current solutions. It also presents the device from the ethical and sustainable viewpoint. Such alternative to already existing methods is competitive as far as energy usage is concerned.