Smart design of scaffolds obtained by biofabrication for tissue engineering applications

A engenharia de tecidos é um domínio tecnológico emergente em rápido desenvolvimento que se destina a produzir substitutos viáveis para a restauração, manutenção ou melhoria da função dos tecidos ou órgãos humanos. Uma das estratégias mais predominantes em engenharia de tecidos envolve crescimento celular sobre matrizes de suporte (scaffolds), biocompatíveis e biodegradáveis. Estas matrizes devem possuir não só elevadas propriedades mecânicas e vasculares, mas também uma elevada porosidade. Devido à incompatibilidade destes dois parâmetros, é necessário desenvolver estratégias de simulação de forma a obter estruturas optimizadas. A previsão real das propriedades mecânicas, vasculares e topológicas das matrizes de suporte, produzidas por técnicas de biofabricação, é muito importante para as diversas aplicações em engenharia de tecidos. A presente dissertação apresenta o estado da arte da engenharia de tecidos, bem como as técnicas de biofabricação envolvidas na produção de matrizes de suporte. Para o design optimizado de matrizes de suporte foi adoptada uma metodologia de design baseada tanto em métodos de elementos finitos para o cálculo do comportamento mecânico, vascular e as optimizações topológicas, como em métodos analíticos para a validação das simulações estruturais utilizando dados experimentais. Considerando que as matrizes de suporte são estruturas elementares do tipo LEGO, dois tipos de famílias foram consideradas, superfícies não periódicas e as superfícies triplas periódicas que descrevem superfícies naturais. Os objectivos principais desta dissertação são: i) avaliar as técnicas existentes de engenharia de tecidos; ii) avaliar as técnicas existentes de biofabricação para a produção de matrizes de suporte; iii) avaliar o desempenho e comportamento das matrizes de suporte; iv) implementar uma metodologia de design de matrizes de suporte em variáveis tais como a porosidade, geometria e comportamento mecânico e vascular por forma a auxiliar o processo de design; e por fim, v) validar experimentalmente a metodologia adoptada.

Volatile terpenoids and C13 norisoprenoids in wines: development of rapid methods of analysis and evaluation of the sesquiterpenoids biological potential

Vitis vinifera L., the most widely cultivated fruit crop in the world, was the starting point for the development of this PhD thesis. This subject was exploited following on two actual trends: i) the development of rapid, simple, and high sensitive methodologies with minimal sample handling; and ii) the valuation of natural products as a source of compounds with potential health benefits. The target group of compounds under study were the volatile terpenoids (mono and sesquiterpenoids) and C13 norisoprenoids, since they may present biological impact, either from the sensorial point of view, as regards to the wine aroma, or by the beneficial properties for the human health. Two novel methodologies for quantification of C13 norisoprenoids in wines were developed. The first methodology, a rapid method, was based on the headspace solid-phase microextraction combined with gas chromatography-quadrupole mass spectrometry operating at selected ion monitoring mode (HS-SPME/GC-qMS-SIM), using GC conditions that allowed obtaining a C13 norisoprenoid volatile signature. It does not require any pre-treatment of the sample, and the C13 norisoprenoid composition of the wine was evaluated based on the chromatographic profile and specific m/z fragments, without complete chromatographic separation of its components. The second methodology, used as reference method, was based on the HS-SPME/GC-qMS-SIM, allowing the GC conditions for an adequate chromatographic resolution of wine components. For quantification purposes, external calibration curves were constructed with β-ionone, with regression coefficient (r2) of 0.9968 (RSD 12.51 %) and 0.9940 (RSD of 1.08 %) for the rapid method and for the reference method, respectively. Low detection limits (1.57 and 1.10 μg L-1) were observed. These methodologies were applied to seventeen white and red table wines. Two vitispirane isomers (158-1529 L-1) and 1,1,6-trimethyl-1,2-dihydronaphthalene (TDN) (6.42-39.45 μg L-1) were quantified. The data obtained for vitispirane isomers and TDN using the two methods were highly correlated (r2 of 0.9756 and 0.9630, respectively). A rapid methodology for the establishment of the varietal volatile profile of Vitis vinifera L. cv. 'Fernão-Pires' (FP) white wines by headspace solid-phase microextraction combined with comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry (HS-SPME/GCxGC-TOFMS) was developed. Monovarietal wines from different harvests, Appellations, and producers were analysed. The study was focused on the volatiles that seem to be significant to the varietal character, such as mono and sesquiterpenic compounds, and C13 norisoprenoids. Two-dimensional chromatographic spaces containing the varietal compounds using the m/z fragments 93, 121, 161, 175 and 204 were established as follows: 1tR = 255-575 s, 2tR = 0,424-1,840 s, for monoterpenoids, 1tR = 555-685 s, 2tR = 0,528-0,856 s, for C13 norisoprenoids, and 1tR = 695-950 s, 2tR = 0,520-0,960 s, for sesquiterpenic compounds. For the three chemical groups under study, from a total of 170 compounds, 45 were determined in all wines, allowing defining the "varietal volatile profile" of FP wine. Among these compounds, 15 were detected for the first time in FP wines. This study proposes a HS-SPME/GCxGC-TOFMS based methodology combined with classification-reference sample to be used for rapid assessment of varietal volatile profile of wines. This approach is very useful to eliminate the majority of the non-terpenic and non-C13 norisoprenic compounds, allowing the definition of a two-dimensional chromatographic space containing these compounds, simplifying the data compared to the original data, and reducing the time of analysis. The presence of sesquiterpenic compounds in Vitis vinifera L. related products, to which are assigned several biological properties, prompted us to investigate the antioxidant, antiproliferative and hepatoprotective activities of some sesquiterpenic compounds. Firstly, the antiradical capacity of trans,trans-farnesol, cis-nerolidol, α-humulene and guaiazulene was evaluated using chemical (DPPH• and hydroxyl radicals) and biological (Caco-2 cells) models. Guaiazulene (IC50= 0.73 mM) was the sesquiterpene with higher scavenger capacity against DPPH•, while trans,trans-farnesol (IC50= 1.81 mM) and cis-nerolidol (IC50= 1.48 mM) were more active towards hydroxyl radicals. All compounds, with the exception of α-humulene, at non-cytotoxic levels (≤ 1 mM), were able to protect Caco-2 cells from oxidative stress induced by tert-butyl hydroperoxide. The activity of the compounds under study was also evaluated as antiproliferative agents. Guaiazulene and cis-nerolidol were able to more effectively arrest the cell cycle in the S-phase than trans,trans-farnesol and α-humulene, being the last almost inactive. The relative hepatoprotection effect of fifteen sesquiterpenic compounds, presenting different chemical structures and commonly found in plants and plant-derived foods and beverages, was assessed. Endogenous lipid peroxidation and induced lipid peroxidation with tert-butyl hydroperoxide were evaluated in liver homogenates from Wistar rats. With the exception of α-humulene, all the sesquiterpenic compounds under study (1 mM) were effective in reducing the malonaldehyde levels in both endogenous and induced lipid peroxidation up to 35% and 70%, respectively. The developed 3D-QSAR models, relating the hepatoprotection activity with molecular properties, showed good fit (R2LOO > 0.819) with good prediction power (Q2 > 0.950 and SDEP < 2%) for both models. A network of effects associated with structural and chemical features of sesquiterpenic compounds such as shape, branching, symmetry, and presence of electronegative fragments, can modulate the hepatoprotective activity observed for these compounds. In conclusion, this study allowed the development of rapid and in-depth methods for the assessment of varietal volatile compounds that might have a positive impact on sensorial and health attributes related to Vitis vinifera L. These approaches can be extended to the analysis of other related food matrices, including grapes and musts, among others. In addition, the results of in vitro assays open a perspective for the promising use of the sesquiterpenic compounds, with similar chemical structures such as those studied in the present work, as antioxidants, hepatoprotective and antiproliferative agents, which meets the current challenges related to diseases of modern civilization.

Analysis, modeling, design and optimization of future communications systems: from theory to practice

Esta tese descreve uma framework de trabalho assente no paradigma multi-camada para analisar, modelar, projectar e optimizar sistemas de comunicação. Nela se explora uma nova perspectiva acerca da camada física que nasce das relações entre a teoria de informação, estimação, métodos probabilísticos, teoria da comunicação e codificação. Esta framework conduz a métodos de projecto para a próxima geração de sistemas de comunicação de alto débito. Além disso, a tese explora várias técnicas de camada de acesso com base na relação entre atraso e débito para o projeto de redes sem fio tolerantes a atrasos. Alguns resultados fundamentais sobre a interação entre a teoria da informação e teoria da estimação conduzem a propostas de um paradigma alternativo para a análise, projecto e optimização de sistemas de comunicação. Com base em estudos sobre a relação entre a informação recíproca e MMSE, a abordagem descrita na tese permite ultrapassar, de forma inovadora, as dificuldades inerentes à optimização das taxas de transmissão de informação confiáveis em sistemas de comunicação, e permite a exploração da atribuição óptima de potência e estruturas óptimas de pre-codificação para diferentes modelos de canal: com fios, sem fios e ópticos. A tese aborda também o problema do atraso, numa tentativa de responder a questões levantadas pela enorme procura de débitos elevados em sistemas de comunicação. Isso é feito através da proposta de novos modelos para sistemas com codificação de rede (network coding) em camadas acima da sua camada física. Em particular, aborda-se a utilização de sistemas de codificação em rede para canais que variam no tempo e são sensíveis a atrasos. Isso foi demonstrado através da proposta de um novo modelo e esquema adaptativo, cujos algoritmos foram aplicados a sistemas sem fios com desvanecimento (fading) complexo, de que são exemplos os sistemas de comunicação via satélite. A tese aborda ainda o uso de sistemas de codificação de rede em cenários de transferência (handover) exigentes. Isso é feito através da proposta de novos modelos de transmissão WiFi IEEE 801.11 MAC, que são comparados com codificação de rede, e que se demonstram possibilitar transferência sem descontinuidades. Pode assim dizer-se que esta tese, através de trabalho de análise e de propostas suportadas por simulações, defende que na concepção de sistemas de comunicação se devem considerar estratégias de transmissão e codificação que sejam não só próximas da capacidade dos canais, mas também tolerantes a atrasos, e que tais estratégias têm de ser concebidas tendo em vista características do canal e a camada física.

Caracterização experimental e modelação numérica de espumas metálicas

As espumas de alumínio são materiais ultraleves, o que as torna atractivas para um largo espectro de aplicações comerciais na área da defesa, na indústria automóvel e aeroespacial, entre outras. Actualmente, há um grande interesse na utilização de espumas de alumínio em componentes estruturais ultraleves, incorporados em sistemas de absorção de energia para protecção contra o impacto. O recurso à simulação numérica para resolver problemas de engenharia em várias áreas é cada vez mais comum. A modelação numérica dos materiais assume vital importância quando o problema envolve a análise de processos tecnológicos como, por exemplo, a conformação plástica de materiais, ou a análise de estruturas. Deste modo, torna-se imprescindível garantir que a modelação dos materiais é de tal forma rigorosa que permite simular o melhor possível o seu comportamento real nas condições concretas da análise a realizar. A forma mais comum de garantir o rigor dos modelos utilizados é a validação dos modelos numéricos tendo por base resultados experimentais. Neste trabalho, fez-se a caracterização do comportamento mecânico das espumas de alumínio com nome comercial ALPORAS!, obtidas pelo processo de fabrico denominado expansão directa do metal fundido por adição de um agente expansor. Esta caracterização consistiu num conjunto de ensaios experimentais quer no regime quasi-estático, quer no regime dinâmico. No regime quasi-estático realizaram-se ensaios de compressão uniaxial e de compressão multiaxial. Para a caracterização no regime dinâmico foram realizados ensaios em barras de Hopkinson de polimetil-metacrilato (PMMA). Com base nos resultados experimentais obtidos determinaram-se os parâmetros dos dois modelos constitutivos para espumas metálicas implementados no programa comercial Abaqus™/Explicit. Estes modelos, e os respectivos parâmetros determinados, foram validados reproduzindo numericamente alguns ensaios experimentais quasi-estáticos e dinâmicos. Assim, verificou-se a adequabilidade dos modelos em diversas condições quer em termos de esforços quer em termos de regime de taxa de deformação Por último, desenvolveu-se uma estrutura inovadora para absorção de energia durante um impacto, constituída por componentes perfilados em liga de alumínio e por componentes em espumas de alumínio. Esta estrutura foi testada exclusivamente com recurso à simulação numérica, utilizando os modelos constitutivos validados anteriormente.

Ruthenium(II)-trithiacyclononane complexes as potential antitumourals

Os únicos complexos metálicos presentemente utilizados em quimioterapia compreendem exclusivamente compostos de platina, com as desvantagens de apresentarem um leque de acção restrito e de provocarem sérios efeitos secundários. Na constante procura por novos fármacos antineoplásicos metálicos, os complexos de ruténio têm sido apresentados como uma alternativa adequada e existem já dois complexos de Ru(III) em ensaios clínicos. Estes são descritos como pró-fármacos, postulando-se que o seu mecanismo de acção envolva redução in vivo para originar complexos de Ru(II) activos. Assim, o actual desenvolvimento de fármacos antitumorais baseados em ruténio passará por criar novos complexos de Ru(II). O trabalho aqui descrito enquadra-se neste objectivo, tendo sido sintetizados complexos de ruténio(II)-tritiaciclononano com ligandos biologicamente activos, e avaliada a sua actividade antitumoral in vitro. Os ligandos utilizados compreendem um hidroxifenilpirazole, aminoácidos e derivados, flavonóides e quinonas. No primeiro capítulo do trabalho são apresentados os actuais desafios no desenvolvimento de complexos metálicos para quimioterapia e é ilustrada a importância dos complexos de Ru(II) aqui descritos no panorama actual de investigação. No capítulo dois, é apresentada uma descrição pormenorizada dos procedimentos experimentais, materiais e equipamentos utilizados na síntese, caracterização e ensaios biológicos. O capítulo três é dividido em duas sub-secções, a primeira analisando os resultados das sínteses e a caracterização estrutural dos complexos, e a segunda apresentando os resultados da sua actividade antiproliferativa. Foram obtidos onze novos complexos de ruténio(II)-tritiaciclononano, com rendimentos razoáveis. São apresentadas propostas das suas estruturas moleculares, sendo que estas mostram uma variedade interessante de modos de coordenação de acordo com os diferentes ligandos, ou seja, N, N,O, O,O e O. A actividade antiproliferativa dos complexos e dos respectivos ligandos foi avaliada em quatro linhas celulares tumorais, representativas de três tipos de cancro: osso (MG-63), próstata (PC-3) e mama (MCF-7 e MDA-MB-231). Quatro dos novos complexos demonstraram uma actividade antiproliferativa promissora, ou seja, aqueles que apresentam um hidroxifenilpirazole, a 3,7-dihidroxiflavona, a plumbagina ou a juglona na sua esfera de coordenação. Entre estes resultados, destacam-se os valores de IC50 para a linha celular MDA-MB-231 por se apresentarem inferiores ao apresentado pelo complexo de Ru(II)-tritiaciclononano mais activo descrito na literatura.

Biofabricação de enxertos porosos de PCL/FastOs™: aplicação óssea

A Engenharia de Tecidos é um domínio multidisciplinar que combina especialistas de múltiplos domínios, no sentido de se desenvolverem substitutos biológicos para a regeneração, reparação ou restauração de funções de órgãos ou tecidos. A estratégia mais comum em engenharia de tecidos consiste na utilização de matrizes de suporte (scaffolds) tridimensionais, biocompatíveis, biodegradáveis e altamente porosos, os quais servem de substrato físico ao processo de adesão, proliferação e diferenciação celular. O objectivo deste trabalho de investigação centrou-se na produção e caracterização de scaffolds de PCL e de PCL com partículas de biovidro, abordando um processo de biofabricação, que teve por base o princípio da extrusão. Utilizou-se para tal um equipamento patenteado pelo Centro para o Desenvolvimento Rápido e Sustentado do Produto (CDRsp) designado Bioextruder. Trata-se de um sistema concebido para a produção de matrizes com ou sem encapsulamento de células, de uma forma automática, flexível e integrada. As estruturas obtidas caracterizaram-se quanto às propriedades térmicas, químicas, morfológicas e mecânicas. Realizaram-se ainda, testes de bioactividade e testes de degradação in vitro. Os resultados obtidos mostram que as condições de processamento não induzem qualquer alteração no que diz respeito às propriedades térmicas e químicas dos materiais, que o aumento do teor de biovidro conduz a uma fragmentação da matriz polimérica num período de tempo mais curto, que os scaffolds obtidos apresentam uma geometria bem definida e uma distribuição de poros uniforme. Demonstra-se assim, que a combinação da matriz polimérica (PCL) com o biovidro, sob a forma de scaffolds é promissora para aplicações em Engenharia de Tecidos e Medicina Regenerativa.

Metal-organic frameworks based on phosphonate linkers

During the last few decades, Metal-Organic Frameworks (MOFs), also known as Coordination Polymers, have attracted worldwide research attentions due to their incremented fascinating architectures and unique properties. These multidimensional materials have been potential applications in distinct areas: gas storage and separation, ion exchange, catalysis, magnetism, in optical sensors, among several others. The MOF research group at the University of Aveiro has prepared MOFs from the combination of phosphonate organic primary building units (PBUs) with, mainly, lanthanides. This thesis documents the last findings in this area involving the synthesis of multidimensional MOFs based on four di- or tripodal phosphonates ligands. The organic PBUs were designed and prepared by selecting and optimizing the best reaction conditions and synthetic routes. The self-assembly between phosphonate PBUs and rare-earths cations led to the formation of several 1D, 2D and 3D families of isotypical MOFs. The preparation of these materials was achieved by using distinct synthetic approaches: hydro(solvo)thermal, microwave- and ultrasound-assisted, one-pot and ionothermal synthesis. The selection of the organic PBUs showed to have an important role in the final architectures: while flexible phosphonate ligands afforded 1D, 2D and dense 3D structures, a large and rigid organic PBU isolated a porous 3D MOF. The crystal structure of these materials was successfully unveiled by powder or single-crystal X-ray diffraction. All multidimensional MOFs were characterized by standard solid-state techniques (FT-IR, electron microscopy (SEM and EDS), solid-state NMR, elemental and thermogravimetric analysis). Some MOF materials exhibited remarkable thermal stability and robustness up to ca. 400 ºC. The intrinsic properties of some MOFs were investigated. Photoluminescence studies revealed that the selected organic PBUs are suitable sensitizers of Tb3+ leading to the isolation of intense green-emitting materials. The suppression of the O−H quenchers by deuteration or dehydration processes improves substantially the photoluminescence of the optically-active Eu3+-based materials. Some MOF materials exhibited high heterogeneous catalytic activity and excellent regioselectivity in the ring-opening reaction of styrene oxide (PhEtO) with methanol (100% conversion of PhEtO at 55 ºC for 30 min). The porous MOF material was employed in gas separation processes. This compound showed the ability to separate propane over propylene. The ionexchanged form of this material (containing K+ cations into its network) exhibited higher affinity for CO2 being capable to separate acetylene over this environment non-friendly gas.

A tale of two bioprocesses

Bioprocesses use microorganisms or cells in order to produce and/or obtain some desired products. Nowadays these strategies appear as a fundamental alternative to the traditional chemical processes. Amongst the many advantages associated to their use in the chemical, oil or pharmaceutical industries, their low cost, easily scale-up and low environmental impact should be highlighted. This work reports two examples of bioprocesses as alternatives to traditional chemical processes used by the oil and pharmaceutical industries. In the first part of this work it was studied an example of a bioprocess based on the use of microorganisms in enhanced oil recovery. Currently, due to high costs of oil and its scarcity, the enhanced oil recovery techniques become very attractive. Between the available techniques the use of microbial enhanced oil recovery (MEOR) has been highlighted. This process is based on the stimulation of indigenous microorganisms or by the injection of microorganism consortia to produce specific metabolites and hence increase the amount of oil recovered. In the first chapters of this work the isolation of several microorganisms from samples of paraffinic Brazilian oils is described, and their tensioactive and biodegradability properties are presented. Furthermore, the chemical structures of the biosurfactants produced by those isolates were also characterized. In the final chapter of the first part, the capabilities of some isolated bacteria to enhance the oil recovery of paraffinic Brazilian oils entrapped in sand-pack columns were evaluated. In the second part of this work it was investigated aqueous two-phase systems or aqueous biphasic systems (ABS) as extractive strategies for antibiotics directly from the fermented broth in which they are produced. To this goal, several aqueous two-phase systems composed of ionic liquids (ILs) and polymers were studied for the first time and their phase diagrams were determined. The novel ATPS appear as effective and economic methods to extract different biomolecules or/and biological products. Thus, aiming the initial antibiotics extraction purpose it was studied the influence of a wide range of ILs and polymers in the aqueous two-phase formation ability, as well as their influence in the partitioning of several type-molecules, such as amino acids, alkaloids and dyes. As a final chapter it is presented the capacity of these novel systems to extract the antibiotic tetracycline directly from the fermented broth of Streptomyces aureofaciens.

Revenue diversification in higher education: the case of Portugal

Socio-economic changes, alterations in societal expectations and new public policies have put pressures on higher education public funding, bringing the issue of funding diversification to the forefront. Income diversification, namely, generation of funds from private, as well as from competitive public sources, has become increasingly important in European higher education due to a complex financial environment and perceived deficit of innovation transfer. Although there are numerous studies about changes in national funding systems and allocation mechanisms, few have focused on diversification of funding sources, especially in the European context, making Portugal no exception. Thus, this study aims at exploring income diversification at the institutional level and its influence on the internal organisational structures. For this purpose two Portuguese public universities were chosen as case studies. The empirical material was collected through semi-structured interviews with top management and middle management of each university and through documentary analysis. Data analysis demonstrated that both universities are in the process of institutionalizing and formalising practices of income diversification, notably by getting more professional in how they are dealing with external stakeholders, such as businesses, local community, and students. However, the study also revealed that there is no formal, organised strategy to deal with income diversification. In general, the universities are reacting to external demands rather than pro-actively exploring opportunities. In this respect, the analysis determined several factors that promote or inhibit income diversification activities. Quality and favourable organizational culture were named by the interviewees as the most relevant factors for successful income diversification. External factors such as legal arrangements and funding conditions were cited as major constraints. This research has also revealed that revenue diversification activities tend to develop along the continuum towards higher sophistication and systematisation of activities that are supported by a powerful infrastructure. Together with efforts at the institutional level, the role of government policies proves to be crucial in providing tools and incentives to higher education institutions and creating a harmonious higher education system.

Optimisation of viscoelastic treatments using genetic algorithms

Viscoelastic treatments are one of the most efficient treatments, as far as passive damping is concerned, particularly in the case of thin and light structures. In this type of treatment, part of the strain energy generated in the viscoelastic material is dissipated to the surroundings, in the form of heat. A layer of viscoelastic material is applied to a structure in an unconstrained or constrained configuration, the latter proving to be the most efficient arrangement. This is due to the fact that the relative movement of both the host and constraining layers cause the viscoelastic material to be subjected to a relatively high strain energy. There are studies, however, that claim that the partial application of the viscoelastic material is just as efficient, in terms of economic costs or any other form of treatment application costs. The application of patches of material in specific and selected areas of the structure, thus minimising the extension of damping material, results in an equally efficient treatment. Since the damping mechanism of a viscoelastic material is based on the dissipation of part of the strain energy, the efficiency of the partial treatment can be correlated to the modal strain energy of the structure. Even though the results obtained with this approach in various studies are considered very satisfactory, an optimisation procedure is deemed necessary. In order to obtain optimum solutions, however, time consuming numerical simulations are required. The optimisation process to use the minimum amount of viscoelastic material is based on an evolutionary geometry re-design and calculation of the modal damping, making this procedure computationally costly. To avert this disadvantage, this study uses adaptive layerwise finite elements and applies Genetic Algorithms in the optimisation process.

Control design for multicast-aware class-based networks

The expectations of citizens from the Information Technologies (ITs) are increasing as the ITs have become integral part of our society, serving all kinds of activities whether professional, leisure, safety-critical applications or business. Hence, the limitations of the traditional network designs to provide innovative and enhanced services and applications motivated a consensus to integrate all services over packet switching infrastructures, using the Internet Protocol, so as to leverage flexible control and economical benefits in the Next Generation Networks (NGNs). However, the Internet is not capable of treating services differently while each service has its own requirements (e.g., Quality of Service - QoS). Therefore, the need for more evolved forms of communications has driven to radical changes of architectural and layering designs which demand appropriate solutions for service admission and network resources control. This Thesis addresses QoS and network control issues, aiming to improve overall control performance in current and future networks which classify services into classes. The Thesis is divided into three parts. In the first part, we propose two resource over-reservation algorithms, a Class-based bandwidth Over-Reservation (COR) and an Enhanced COR (ECOR). The over-reservation means reserving more bandwidth than a Class of Service (CoS) needs, so the QoS reservation signalling rate is reduced. COR and ECOR allow for dynamically defining over-reservation parameters for CoSs based on network interfaces resource conditions; they aim to reduce QoS signalling and related overhead without incurring CoS starvation or waste of bandwidth. ECOR differs from COR by allowing for optimizing control overhead minimization. Further, we propose a centralized control mechanism called Advanced Centralization Architecture (ACA), that uses a single state-full Control Decision Point (CDP) which maintains a good view of its underlying network topology and the related links resource statistics on real-time basis to control the overall network. It is very important to mention that, in this Thesis, we use multicast trees as the basis for session transport, not only for group communication purposes, but mainly to pin packets of a session mapped to a tree to follow the desired tree. Our simulation results prove a drastic reduction of QoS control signalling and the related overhead without QoS violation or waste of resources. Besides, we provide a generic-purpose analytical model to assess the impact of various parameters (e.g., link capacity, session dynamics, etc.) that generally challenge resource overprovisioning control. In the second part of this Thesis, we propose a decentralization control mechanism called Advanced Class-based resource OverpRovisioning (ACOR), that aims to achieve better scalability than the ACA approach. ACOR enables multiple CDPs, distributed at network edge, to cooperate and exchange appropriate control data (e.g., trees and bandwidth usage information) such that each CDP is able to maintain a good knowledge of the network topology and the related links resource statistics on real-time basis. From scalability perspective, ACOR cooperation is selective, meaning that control information is exchanged dynamically among only the CDPs which are concerned (correlated). Moreover, the synchronization is carried out through our proposed concept of Virtual Over-Provisioned Resource (VOPR), which is a share of over-reservations of each interface to each tree that uses the interface. Thus, each CDP can process several session requests over a tree without requiring synchronization between the correlated CDPs as long as the VOPR of the tree is not exhausted. Analytical and simulation results demonstrate that aggregate over-reservation control in decentralized scenarios keep low signalling without QoS violations or waste of resources. We also introduced a control signalling protocol called ACOR Protocol (ACOR-P) to support the centralization and decentralization designs in this Thesis. Further, we propose an Extended ACOR (E-ACOR) which aggregates the VOPR of all trees that originate at the same CDP, and more session requests can be processed without synchronization when compared with ACOR. In addition, E-ACOR introduces a mechanism to efficiently track network congestion information to prevent unnecessary synchronization during congestion time when VOPRs would exhaust upon every session request. The performance evaluation through analytical and simulation results proves the superiority of E-ACOR in minimizing overall control signalling overhead while keeping all advantages of ACOR, that is, without incurring QoS violations or waste of resources. The last part of this Thesis includes the Survivable ACOR (SACOR) proposal to support stable operations of the QoS and network control mechanisms in case of failures and recoveries (e.g., of links and nodes). The performance results show flexible survivability characterized by fast convergence time and differentiation of traffic re-routing under efficient resource utilization i.e. without wasting bandwidth. In summary, the QoS and architectural control mechanisms proposed in this Thesis provide efficient and scalable support for network control key sub-systems (e.g., QoS and resource control, traffic engineering, multicasting, etc.), and thus allow for optimizing network overall control performance.

Innovation in tourism: the role of regional innovation systems

Esta tese tem como principal objetivo analisar as características, a importância e o papel da inovação territorial em turismo e o seu impacto no desenvolvimento dos destinos. Consiste num estudo multidisciplinar suportado numa exaustiva revisão da literatura sobre temas como desenvolvimento, inovação e modelos de inovação territorial. Com base nas principais conclusões de natureza conceptual, considerou-se o modelo dos sistemas regionais de inovação como o mais adequado para aplicação ao sistema turístico, e a constituição de redes como estruturas fundamentais para a sua operacionalização. A partir desta abordagem teórica, foi desenvolvido um quadro conceptual para a análise da inovação sistémica no sector do turismo. Esta abordagem permitiu a definição de um conjunto de hipóteses, as quais foram testadas através dos resultados da parte empírica da tese. Foram desenvolvidos dois estudos empíricos distintos, mas complementares nas regiões do Douro e de Aveiro. O primeiro teve como objetivo inquirir empresas turísticas, enquanto o segundo foi dirigido a instituições regionais com intervenção no sector do turismo ou na inovação. Os resultados obtidos conduziram a importantes conclusões sobre o desempenho das empresas e regiões em termos de inovação, os padrões de networking desenvolvidos no âmbito de processos de inovação, a importância do conhecimento existente nas regiões e os fatores específicos das mesmas para a inovação em turismo, a perceção das empresas turísticas sobre o ambiente de inovação e o seu contributo para a evolução e para o sucesso dos destinos turísticos. A tese recorre a uma abordagem quantitativa que inclui estatística descritiva e indutiva e ao método da análise de redes (sociometria). A combinação de métodos levou a importantes conclusões sobre a inovação em turismo, com uma focalização especial no que a relaciona com os sistemas regionais de inovação. As conclusões permitem avançar com um conjunto de implicações e sugestões para futuros projetos de investigação sobre o tema, bem como para a gestão dos destinos turísticos, uma vez que contribui para um maior e mais aprofundado conhecimento do fenómeno da inovação em turismo desenvolvida a nível regional. Os resultados demonstram que diferentes regiões apresentam sistemas regionais de inovação distintos. Assim, não existe um modelo único que possa ser aplicado indistintamente em todas as regiões. Contudo, as conclusões apontam para a existência de padrões e práticas que aperfeiçoam o seu funcionamento, aumentando o desempenho ao nível da inovação, bem como a competitividade global do destino.

All-optical routing functionalities

All-optical solutions for switching and routing packet-based traffic are crucial for realizing a truly transparent network. To meet the increasing requirements for higher bandwidth, such optical packet switched networks may require the implementation of digital functions in the physical layer. This scenario stimulated us to research and develop innovative high-speed all-optical storage memories, focusing mainly on bistables whose state switching is triggered by a pulsed clock signal. In clocked devices, a synchronization signal is responsible for controlling the enabling of the bistable. This thesis also presents novel solutions to implement optical logic gates, which are basic building blocks of any processing system and a fundamental element for the development of complex processing functionalities. Most of the proposed schemes developed in this work are based on SOA-MZI structures due to their inherent characteristics such as, high extinction ratio, high operation speed, high integration capability and compactness. We addressed the experimental implementation of an all-optical packet routing scheme, with contention resolution capability, using interconnected SOAMZIs. The impact on the system performance of the reminiscent power of the blocked packets, from the non ideal switching performed by the SOA-MZIs, was also assessed.

Determinação e aplicações dos frutooligossacarídeos de Yacon (Smallanthus sonchifolius)

Torna-se cada vez mais importante fortalecer o vínculo entre o setor agrário, as universidades e o setor industrial. Através de estudos científicos pode-se aprimorar a produção agrícola, valorizar comercialmente os produtos manufaturados e permitir usos biotecnológicos anteriormente indisponíveis. Este trabalho ambicionou gerar dados que incentivassem e permitissem o suporte técnico-científico adequado ao pequeno e médio agricultor do litoral da Grande-Florianópolis, no estado de Santa Catarina (Brasil) viabilizando a exploração comercial das raízes de yacon (Smallanthus sonchifolius). Primeiro, o enfoque agronómico que objetivou ofertar dados científicos da adequação climática do plantio de yacon na região do litoral de Florianópolis (SC) com a finalidade de otimizar a produção e rentabilizá-la. Por cromatografia líquida de alta eficiência foram quantificados os valores de frutooligossacarídeos (fração de interesse, alimento funcional com efeito prebiótico), frutose, glucose e sacarose e avaliaram-se os efeitos diretos dos fatores climáticos na produção fazendo uso da análise multivariada para sua interpretação. Os resultados mostram que a produção de FOS não consegue atingir valores similares aos de outras regiões onde o yacon é explorado economicamente. Igualmente a produção de FOS parece ter uma grande dependência do clima, especialmente da amplitude térmica e da chuva. O segundo enfoque foi a possibilidade de exploração comercial, através de secagem em estufa. O processo de secagem, especialmente em amostras produzidas em condições climatológicas mais drásticas induzem modificações provocadas pela reacção de Maillard, como foi verificado por estudos de GCxGC-Tof-Ms e ESI-MS. O terceiro enfoque foi biotecnológico e consistiu em aproveitar frutooligossacarídeos comerciais para utilizá-los como matriz polimérica para produção de estruturas em escala nano e micrométrica através da eletropulverização. Foram observadas, nesta etapa, os aspetos morfológicos e as características das partículas formadas e a sua capacidade de servir como veículo transportador de compostos com características anti-oxidantes.

Characterization of water-soluble organic matter from urban aerosols

Water-soluble organic matter (WSOM) from atmospheric particles comprises a complex array of molecular structures that play an important role on the physic-chemical properties of atmospheric particles and, therefore, are linked to several global-relevant atmospheric processes which impact the climate and public health. Due to the large variety of sources and formation processes, adequate knowledge on WSOM composition and its effects on the properties of atmospheric aerosol are still limited. Therefore, this thesis aims at providing new insights on the molecular composition of WSOM from fine atmospheric aerosols typical of an urban area (Aveiro, Portugal). In a first step, adsorption phenomena of semivolatile organic compounds on quartz fibre filters employed in the collection of atmospheric aerosols were assessed. Afterwards, atmospheric aerosol samples were collected during fifteen months, on a weekly basis. A mass balance of aerosol samples was performed in order to set the relative contribution of elemental carbon, WSOM and water-insoluble organic matter to the aerosol mass collected at the urban area of Aveiro, with a special focus on the assessment of the influence of different meteorological conditions. In order to assess the chemical complexity of the WSOM from urban aerosols, their structural characteristics were studied by means of Fourier transform infrared infrared - Attenuated Total Reflectance (FTIR-ATR) and solid-state cross polarization with magic angle spinning 13C nuclear magnetic resonance (CPMAS 13C NMR) spectroscopies, as well as their elemental composition. The structural characterization of aerosol WSOM samples collected in the urban area highlighted a highly complex mixture of functional groups. It was concluded that aliphatic and aromatic structures, hydroxyl groups and carboxyl groups are characteristic to all samples. The semi-quantitative assessment of the CPMAS 13C NMR data showed different distributions of the various functional groups between the aerosol samples collected at different seasons. Moreover, the presence of signals typical of lignin-derived structures in both CPMAS 13C NMR and FTIR-ATR spectra of the WSOM samples from the colder seasons, highlights the major contribution of biomass burning processes in domestic fireplaces, during low temperature conditions, into the bulk chemical properties of WSOM from urban aerosols. A comprehensive two-dimensional liquid chromatography (LC x LC) method, on-line coupled to a diode array, fluorescence, and evaporative light scattering detectors, was employed for resolving the chemical heterogeneity of the aerosol WSOM samples and, simultaneously, to map the hydrophobicity versus the molecular weight distribution of the samples. The LC x LC method employed a mixed-mode hydrophilic interaction column operating under aqueous reversed phase mode in the first dimension, and a size-exclusion column in the second dimension, which was found to be useful for separating the aerosol WSOM samples into various fractions with distinct molecular weight and hydrophobic features. The estimative of the average molecular weight (Mw) distribution of the urban aerosol WSOM samples ranged from 48 to 942 Da and from 45 to 1241 Da in terms of UV absorption and fluorescence detection, respectively. Findings suggest that smaller Mw group fractions seem to be related to a more hydrophobic nature.