The Pico de Navas slump (Burgos, Spain): a large rocky landslide caused by underlying clayey sand fluidification

The Pico de Navas landslide was a large-magnitude rotational movement, affecting 50x106m3 of hard to soft rocks. The objectives of this study were: (1) to characterize the landslide in terms of geology, geomorphological features and geotechnical parameters; and (2) to obtain an adequate geomechanical model to comprehensively explain its rupture, considering topographic, hydro-geological and geomechanical conditions. The rupture surface crossed, from top to bottom: (a) more than 200 m of limestone and clay units of the Upper Cretaceous, affected by faults; and (b) the Albian unit of Utrillas facies composed of silty sand with clay (Kaolinite) of the Lower Cretaceous. This sand played an important role in the basal failure of the slide due to the influence of fine particles (silt and clay), which comprised on average more than 70% of the sand, and the high content presence of kaolinite (>40%) in some beds. Its geotechnical parameters are: unit weight (δ) = 19-23 KN/m3; friction angle (φ) = 13º-38º and cohesion (c) = 10-48 KN/m2. Its microstructure consists of accumulations of kaolinite crystals stuck to terrigenous grains, making clayey peds. We hypothesize that the presence of these aggregates was the internal cause of fluidification of this layer once wet. Besides the faulted structure of the massif, other conditioning factors of the movement were: the large load of the upper limestone layers; high water table levels; high water pore pressure; and the loss of strength due to wet conditions. The 3D simulation of the stability conditions concurs with our hypothesis. The landslide occurred in the Recent or Middle Holocene, certainly before at least 500 BC and possibly during a wet climate period. Today, it appears to be inactive. This study helps to understand the frequent slope instabilities all along the Iberian Range when facies Utrillas is present.

Qual a contribuição das características antropométricas na velocidade de corrida de curta distância ?

v. 19, n. 2, abr./jun. 2016.

La inevitable inconsistencia del Zeus/Júpiter épico

Durante años la investigación literaria ha encontrado fruición en buscar y encontrar inconsistencias narrativas en la Tebaida de Estacio. Concretamente, hay cierto grado de consenso respecto a que las incongruencias en que incurre Júpiter son debidas a negligencia o incuria por parte del poeta. De hecho, no se puede negar que el soberano del cielo se contradice en las ocasiones en que alude a su relación con el Destino. No obstante, no será únicamente el poeta flavio el objeto de mi atención en este artículo. Hoy día se continúa acudiendo a la autoridad filosófica de Séneca (fundamentalmente a Dial. 1.5.8) siempre que el Zeus/Júpiter poshomérico (también el virgiliano) incurre en lo que hemos dado en considerar «incoherencias». Sin embargo, excepción hecha de las composiciones hesiódicas, el estatuto teológico de Zeus/Júpiter es altamente inestable en toda la tradición literaria griega y romana. Quizá deberíamos aceptar, entonces, que durante siglos los que estudiamos literatura antigua hemos tendido a prescindir de la voz autorial y de su autoridad omnímoda para manipular el material literario preexistente con el objeto de generar nuevos significados y nuevas cosmovisiones. En definitiva, nos hemos mostrado proclives a calificar de inconsistencias todo aquello que no se adecua a nuestras expectativas o prejuicios.

Structure et biogéographie des communautés de pico- et de nanoeurcaryotes pélagiques autour de l'archipel du Svalbard

L’Arctique s’est réchauffé rapidement et il y a urgence d’anticiper les effets que cela pourrait avoir sur les protistes à la base de la chaîne alimentaire. Le phytoplancton de l’Océan Arctique inclut les pico- et nano-eucaryotes (0.45-10 μm diamètre de la cellule) et plusieurs de ceux-ci sont des écotypes retrouvés seulement dans l’Arctique alors que d’autres sont introduits des océans plus méridionaux. Alors que les océans tempérés pénètrent dans l’Arctique, il devient pertinent de savoir si ces communautés microbiennes pourraient être modifiées. L’archipel du Svalbard est une région idéale pour observer la biogéographie des communautés microbiennes sous l’influence de processus polaires et tempérés. Bien qu’ils soient géographiquement proches, les régions côtières entourant le Svalbard sont sujettes à des intrusions alternantes de masses d’eau de l’Arctique et de l’Atlantique en plus des conditions locales. Huit sites ont été échantillonnés en juillet 2013 pour identifier les protistes selon un gradient de profondeur et de masses d’eau autour de l’archipel. En plus des variables océanographiques standards, l’eau a été échantillonnée pour synthétiser des banques d’amplicons ciblant le 18S SSU ARNr et son gène pour ensuite être séquencées à haut débit. Cinq des sites d’étude avaient de faibles concentrations de chlorophylle avec des compositions de communauté post-efflorescence dominée par les dinoflagellés, ciliés, des alvéolés parasites putatifs, chlorophycées et prymnesiophytées. L’intrusion des masses d’eau et les conditions environnementales locales étaient corrélées avec la structure des communautés ; l’origine de la masse d’eau contribuant le plus à la distance phylogénétique des communautés microbiennes. Au sein de trois fjords, de fortes concentrations de chlorophylle sous-entendaient des activités d’efflorescence. Un fjord était dominé par Phaeocystis, un deuxième par un clade arctique identifié comme un Pelagophyceae et un troisième par un assemblage mixte. En général, un signal fort d’écotypes liés à l’Arctique prédominait autour du Svalbard.

Pico Cell Integration to Operator’s Incident Management Process

Mobile network coverage is traditionally provided by outdoor macro base stations, which have a long range and serve several of customers. Due to modern passive houses and tightening construction legislation, mobile network service is deteriorated in many indoor locations. Typically, solutions for indoor coverage problem are expensive and demand actions from the mobile operator. Due to these, superior solutions are constantly researched. The solution presented in this thesis is based on Small Cell technology. Small Cells are low power access nodes designed to provide voice and data services.. This thesis concentrates on a specific Small Cell solution, which is called a Pico Cell. The problem regarding Pico Cells and Small Cells in general is that they are a new technological solution for the mobile operator, and the possible problem sources and incidents are not properly mapped. The purpose of this thesis is to figure out the possible problems in the Pico Cell deployment and how they could be solved within the operator’s incident management process. The research in the thesis is carried out with a literature research and a case study. The possible problems are investigated through lab testing. Pico Cell automated deployment process was tested in the lab environment and its proper functionality is confirmed. The related network elements were also tested and examined, and the emerged problems are resolvable. Operators existing incident management process can be used for Pico Cell troubleshooting with minor updates. Certain pre-requirements have to be met before Pico Cell deployment can be considered. The main contribution of this thesis is the Pico Cell integrated incident management process. The presented solution works in theory and solves the problems found during the lab testing. The limitations in the customer service level were solved by adding the necessary tools and by designing a working question pattern. Process structures for automated network discovery and pico specific radio parameter planning were also added for the mobile network management layer..

Neuromuscular adaptations in football athletes with prior history of hamstring strain injury

Background: Hamstring strain injuries (HSI) are one of the most common injuries in a wide variety of running-sports, resulting in a considerable loss of competition and training time. One of the most problematic consequences regarding HSI is the recurrence rate and its non-decrease over the past decades, despite increasing evidence. Recent studies also found several maladaptations post-HSI probably due to neuromuscular inhibition and it has been proposed that these adaptations post-injury may contribute as risk factors for the injury-reinjury cycle and high recurrence rates. Furthermore it has been recently proposed not to disregard the inter-relationship between these adaptations and risk-factors post-injury in order to better understand the mechanisms of this complex injury. Objective: To determine, analyze and correlate neuromuscular adaptations in amateur football players with prior history of HSI per comparison to uninjured athletes in similar conditions. Methodology: Every participant was subjected to isokinetic concentric (60 and 240deg.sec) and eccentric (30 and 120deg.sec¯¹) testing, and peak torque, angle of peak torque and hamstrings to quadriceps (H:Q) conventional ratios were measured, myoelectrical activity of Bicep Femoris (BF) and Medial Hamstrings (MH) were also measured during isokinetic eccentric testing at both velocities and muscle activation percentages were calculated at 30, 50 and 100ms after onset of contraction. Furthermore active and passive knee extension, knee joint position sense (JPS) test, triple-hop distance (THD) test and core stability (flexors and extensors endurance, right and left side bridge test) were used and correlated. Results: Seventeen players have participated in this study: 10 athletes with prior history of HSI, composing the Hamstring injury group (HG) and 7 athletes without prior severe injuries as control group (CG). We found statistical significant differences between HG injured and uninjured sides in the BF myoelectrical activity at almost all times in both velocities and between HG injured and CG non-dominant sides at 100ms in eccentric 120deg.sec¯¹ velocity (p<.05). We found no differences in MH activity. Regarding proprioception we found differences between the HG injured and uninjured sides (p=.027). We found no differences in the rest of used tests. However, significant correlation between myoelectrical activation at 100ms in 120deg.sec¯¹ testing and JPS with initial position at 90º (r-.372; p=0.031) was found, as well as between isokinetic H:Q ratio at 240deg.sec and THD score (r=-.345; p=.045). Conclusion: We found significant differences that support previous research regarding neuromuscular adaptations and BF inhibition post-HSI. Moreover, to our knowledge, this was the first study that found correlation between these adaptations, and may open a door to new perspectives and future studies.

Análise e proposição de estratégias de estimação e controle de velocidade para motores de indução trifásicos

This study presents a proposal of speed servomechanisms without the use of mechanical sensors (sensorless) using induction motors. A comparison is performed and propose techniques for pet rotor speed, analyzing performance in different conditions of speed and load. For the determination of control technique, initially, is performed an analysis of the technical literature of the main control and speed estimation used, with their characteristics and limitations. The proposed technique for servo sensorless speed induction motor uses indirect field-oriented control (IFOC), composed of four controllers of the proportional-integral type (PI): rotor flux controller, speed controller and current controllers in the direct and quadrature shaft. As the main focus of the work is in the speed control loop was implemented in Matlab the recursive least squares algorithm (RLS) for identification of mechanical parameters, such as moment of inertia and friction coefficient. Thus, the speed of outer loop controller gains can be self adjusted to compensate for any changes in the mechanical parameters. For speed estimation techniques are analyzed: MRAS by rotóricos fluxes MRAS by counter EMF, MRAS by instantaneous reactive power, slip, locked loop phase (PLL) and sliding mode. A proposition of estimation in sliding mode based on speed, which is performed a change in rotor flux observer structure is displayed. To evaluate the techniques are performed theoretical analyzes in Matlab simulation environment and experimental platform in electrical machinery drives. The DSP TMS320F28069 was used for experimental implementation of speed estimation techniques and check the performance of the same in a wide speed range, including load insertion. From this analysis is carried out to implement closed-loop control of sensorless speed IFOC structure. The results demonstrated the real possibility of replacing mechanical sensors for estimation techniques proposed and analyzed. Among these, the estimator based on PLL demonstrated the best performance in various conditions, while the technique based on sliding mode has good capacity estimation in steady state and robustness to parametric variations.

História eruptiva do sistema vulcânico fissural dos picos e avaliação da susceptibilidade a escoadas lávicas (ilha de S. Miguel - Açores)

Tese de Doutoramento, Geologia (Vulcanologia), 18 de Julho 2013, Universidade dos Açores.

Influência na qualidade final de metais retificados através da variação da velocidade de mergulho

A retificação, processo final de usinagem de uma peça, utiliza fluidos de corte com a finalidade de lubrificação, refrigeração e remoção de cavacos. No entanto, esses fluidos são extremamente agressivos com o meio. Com o avanço tecnológico a tendência mundial é produzir peças cada vez mais sofisticadas, com elevado grau de tolerância geométrica, dimensional, com bom acabamento superficial, com baixo custo e, principalmente, sem causar danos ao meio. Para tanto, ao processo de retificação está intrínseca a reciclagem do fluido de corte, que se destaca pelo seu custo. Através da variação da velocidade de avanço no processo de retificação cilíndrica externa do aço ABNT D6, racionalizando a aplicação de dois fluidos de corte e usando um rebolo superabrasivo de CBN (nitreto de boro cúbico) com ligante vitrificado, avaliaram-se os parâmetros de saída da força tangencial de corte, emissão acústica, rugosidade, circularidade, desgaste da ferramenta, tensão residual e a integridade superficial através da microscopia eletrônica de varredura (MEV) dos corpos-de-prova. Com a análise do desempenho do fluido, do rebolo e da velocidade de mergulho, encontraram-se as melhores condições de usinagem propiciando a diminuição do volume de fluido de corte e a diminuição do tempo de usinagem, sem prejudicar os parâmetros geométricos e dimensionais, o acabamento superficial e a integridade superficial dos componentes.

As Festas do Espírito Santo : Pico

Recursos Educativos - Humanidades

Efeitos do treinamento resistido com máquinas pneumáticas e resistência elástica progressiva na força, capacidade funcional e equilíbrio em mulheres idosas : um ensaio clínico randomizado

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Educação Física, Programa de Pós-Graduação Strictu-Sensu em Educação Física, 2015.

Química geral : velocidade das reacções

Académico - Licenciaturas

Intervenção psicomotora nas dificuldades intelectuais e desenvolvimentais : Centro de Atividades Ocupacionais, Santa Casa da Misericórdia da Madalena do Pico

Ao longo do presente relatório de estágio, é apresentado o trabalho desenvolvido pela estagiária durante o estágio inserido no Ramo de Aprofundamento de Competências Profissionais do Mestrado em Reabilitação Psicomotora. Este decorreu no Centro de Atividades Ocupacionais da Santa Casa da Misericórdia da Madalena, durante 8 meses e meio sendo dirigido à intervenção psicomotora em jovens e adultos com Dificuldades Intelectuais e Desenvolvimentais. A intervenção psicomotora incidiu sobre intervenções individuais/grupais e atividade motora, onde foi promovido o bem-estar, qualidade de vida, funcionalidade e autonomia dos clientes, através da aplicação de atividades lúdico-pedagógicas, de mediatização corporal e terapêuticas. Assim, este documento apresenta o percurso de trabalho da estagiária, desde a sua integração na instituição, passando pela observação e conhecimento dos clientes, avaliação inicial, planeamento do processo terapêutico, avaliação final de resultados e reflexão pessoal acerca de todo o processo de estágio profissionalizante.

Associações entre a potência muscular dos membros inferiores e a saúde óssea avaliada através de ultrassonografia quantitativa

Objetivo: Analisar as associações entre a potência muscular dos membros inferiores e a saúde óssea avaliada através de ultrassonografia quantitativa. Métodos: A amostra incluiu 63 crianças de 9 anos de idade. A velocidade de som (VS) do rádio e da tíbia foi avaliada através de ultrassonografia quantitativa, a potência de salto foi estimada a partir de um salto vertical com contramovimento e a maturidade somática foi determinada a partir da estimação do pico de velocidade em altura. O estado geral de saúde e o historial de fraturas foram avaliados através de questionário. As associações entre medidas dos parâmetros ósseos e a potência de salto foram analisadas através de correlações bivariadas, com as variáveis expressas em valores absolutos e relativos (estandardizados). Resultados: Foram observadas associações positivas entre a maturidade somática e a potência de salto expressa tanto em valores absolutos como relativos (p <0,05). A maturidade somática correlacionou-se ainda positivamente com a VS da tíbia nas raparigas (r=0,358, p=0,045), enquanto nos rapazes se verificou uma associação negativa, embora não significativa (r=-0,290, p=0,126). Observou-se uma associação ou propensão para associação negativa entre a VS da tíbia e a potência de salto nos rapazes (r=-0,490, p=0,007) e nas raparigas (r=-0,344, p=0,054). Conclusão: A potência de salto não parece constituir um bom marcador da saúde óssea de rapazes e raparigas de 9 anos de idade quando avaliada através de ultrassom.

Efeito da velocidade de aquecimento nas propriedades de produtos da cerâmica estrutural

Heating rate is one of the main variables that determine a fire cycle. In industrial processes that use high temperatures, greater fire great can reduce the cost of production and increase productivity. The use of faster and more efficient fire cycles has been little investigated by the structural ceramic industry in Brazil. However, one of the possibilities that aims at modernizing the sector is the use of roller kilns and the inclusion of natural gas as fuel. Thus, the purpose of this study is to investigate the effect of heating rate on the technological properties of structural ceramic products. Clay raw materials from the main ceramic industries in the state of Rio Grande do Norte were characterized. Some of the raw materials characterized were formulated to obtain the best physical and mechanical properties. Next, raw materials and formulations were selected to study the influence of heating rate on the final properties of the ceramic materials. The samples were shaped by pressing and extrusion and submitted to rates of 1 °C/min, 10 °C/min and 20 °C/min, with final temperatures of 850 °C, 950 °C and 1050 °C. Discontinuous cycles with rates of 10 °C/min or 15 °C/min up to 600 °C and a rate of 20 °C/min up to final temperature were also investigated. Technological properties were determined for all the samples and microstructural analysis was carried out under a number of fire conditions. Results indicate that faster and more efficient fire cycles than those currently in practice could be used, limiting only some clay doughs to certain fire conditions. The best results were obtained for the samples submitted to slow cycles up to 600 °C and fast fire sinterization up to 950 °C. This paper presents for the first time the use of a fast fire rate for raw materials and clay formulations and seeks to determine ideal dough and processing conditions for using shorter fire times, thus enabling the use of roller kilns and natural gas in structural ceramic industries