Modificação de superfícies de titânio tratadas por plasma de Ar + N2 + O2 visando aplicações biomédicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES

Estudo da deposição de filmes finos de BaTi(1-X)Zr(X)O3 por meio de planejamento Box-Behnken

Ferroelectric ceramics with perovskite structure (ABO3) are widely used in solid state memories (FeRAM’s and DRAM's) as well as multilayered capacitors, especially as a thin films. When doped with zirconium ions, BaTiO3-based materials form a solid solution known as barium zirconate titanate (BaTi1-xZrxO3). Also called BZT, this material can undergo significant changes in their electrical properties for a small variation of zirconium content in the crystal lattice. The present work is the study of the effects of deposition parameters of BaTi0,75Zr0,25O3 thin films by spin-coating method on their morphology and physical properties, through an experimental design of the Box-Behnken type. The resin used in the process has been synthesized by the polymeric precursor method (Pechini) and subsequently split into three portions each of which has its viscosity adjusted to 10, 20 and 30 mPa∙s by means of a rotary viscometer. The resins were then deposited on Pt/Ti/SiO2/Si substrates by spin-coating method on 15 different combinations of viscosity, spin speed (3000, 5500 and 8000 rpm) and the number of deposited layers (5, 8 and 11 layers) and then calcined at 800 ° C for 1 h. The phase composition of the films was analyzed by X-ray diffraction (XRD) and indexed with the JCPDS 36-0019. Surface morphology and grain size were observed by atomic force microscopy (AFM) indicating uniform films and average grain size around 40 nm. Images of the cross section of the films were obtained by scanning electron microscopy field emission (SEM-FEG), indicating very uniform thicknesses ranging from 140-700 nm between samples. Capacitance measurements were performed at room temperature using an impedance analyzer. The films presented dielectric constant values of 55-305 at 100kHz and low dielectric loss. The design indicated no significant interaction effects between the deposition parameters on the thickness of the films. The response surface methodology enabled better observes the simultaneous effect of variables.

Levantamento do Tamanho Médio de Bolhas em Escoamento Bifásico Vertical por Técnica Fotográfica

Para confirmar e validar códigos computacionais de escoamento de fluidos, importantes na segurança de reatores nucleares, é preciso que sejam realizadas medidas experimentais. Como a geração de vapor no fluido refrigerante diminui a eficiência de troca térmica a fração de vazio passa a ser um dos parâmetros mais importantes a ser obtido, e que, num escoamento vertical, pode ser conhecido através da quantidade de bolha e seu diâmetro médio.

Determinantes da Estrutura de Capital de Companhias Abertas Brasileiras Não-Financeiras: Um Estudo Empírico com Dados em Painel

When a company desires to invest in a project, it must obtain resources needed to make the investment. The alternatives are using firm s internal resources or obtain external resources through contracts of debt and issuance of shares. Decisions involving the composition of internal resources, debt and shares in the total resources used to finance the activities of a company related to the choice of its capital structure. Although there are studies in the area of finance on the debt determinants of firms, the issue of capital structure is still controversial. This work sought to identify the predominant factors that determine the capital structure of Brazilian share capital, non-financial firms. This work was used a quantitative approach, with application of the statistical technique of multiple linear regression on data in panel. Estimates were made by the method of ordinary least squares with model of fixed effects. About 116 companies were selected to participate in this research. The period considered is from 2003 to 2007. The variables and hypotheses tested in this study were built based on theories of capital structure and in empirical researches. Results indicate that the variables, such as risk, size, and composition of assets and firms growth influence their indebtedness. The profitability variable was not relevant to the composition of indebtedness of the companies analyzed. However, analyzing only the long-term debt, comes to the conclusion that the relevant variables are the size of firms and, especially, the composition of its assets (tangibility).This sense, the smaller the size of the undertaking or the greater the representation of fixed assets in total assets, the greater its propensity to long-term debt. Furthermore, this research could not identify a predominant theory to explain the capital structure of Brazilian

Ciclos econômicos e emissão de CO2 no Brasil: uma análise dinâmica para políticas ambientais ótimas

Este artigo estuda como as políticas ambientais devem responder de forma ótima aos ciclos econômicos no Brasil. Para isso utilizamos um modelo de ciclos reais de negócios (RBC) com externalidades de poluição. Os resultados indicam que o custo de mitigação de emissões de carbono é mais baixo que o da poluição no Brasil, justificando a adoção de políticas restritivas. Além disso, diante de choques de produtividade, o comportamento ótimo é uma política de mitigação pró-cíclica, onde o imposto e o teto de emissões devem aumentar em períodos de expansão da economia e diminuir em períodos de crise. Também definimos uma regra de decisão para a dinâmica da política de mitigação.

A evolução da distribuição do tamanho das cidades: caso do nordeste brasileiro

A proposta deste artigo foi estudar a evolução do tamanho das cidades dos estados do nordeste do Brasil para os anos de 1990, 2000 e 2010 através da regularidade empírica conhecida como lei de Zipf, a qual pode ser representada por meio da distribuição de Pareto. Por meio da análise na dinâmica da distribuição das populações através do tempo, o crescimento urbano revelou uma persistência hierárquica das cidades de Salvador, Fortaleza e Recife, enquanto que São Luís experimentou o quarto lugar no rankinging das maiores cidades, que persistiu nas duas últimas décadas. A lei de Zipf não se verificou quando se considerou as cidades do Nordeste em conjunto, que pode ser devido ao menor grau de desenvolvimento urbano das cidades dessa região. Na análise dos estados em separado, também não se observou a lei de Zipf, embora tenha se verificado a lei de Gibrat, a qual postula que o crescimento das cidades é independente de seu tamanho. Por fim, acredita-se que a instalação do complexo minerometalúrgico do Maranhão tenha contribuído para o desenvolvimento e para a redução da desigualdade urbana intracidade nesta área.

Development of Zirconia based phosphors for application in lighting and as luminescent bioprobes

The strong progress evidenced in photonic and optoelectronic areas, accompanied by an exponential development in the nanoscience and nanotechnology, gave rise to an increasing demand for efficient luminescent materials with more and more exigent characteristics. In this field, wide band gap hosts doped with lanthanide ions represent a class of luminescent materials with a strong technological importance. Within wide band gap material, zirconia owns a combination of physical and chemical properties that potentiate it as an excellent host for the aforementioned ions, envisaging its use in different areas, including in lighting and optical sensors applications, such as pressure sensors and biosensors. Following the demand for outstanding luminescent materials, there is also a request for fast, economic and an easy scale-up process for their production. Regarding these demands, laser floating zone, solution combustion synthesis and pulsed laser ablation in liquid techniques are explored in this thesis for the production of single crystals, nanopowders and nanoparticles of lanthanides doped zirconia based hosts. Simultaneously, a detailed study of the morphological, structural and optical properties of the produced materials is made. The luminescent characteristics of zirconia and yttria stabilized zirconia (YSZ) doped with different lanthanide ions (Ce3+ (4f1), Pr3+ (4f2), Sm3+ (4f5), Eu3+ (4f6), Tb3+ (4f8), Dy3+ (4f9), Er3+ (4f11), Tm3+ (4f12), Yb3+ (4f13)) and co-doped with Er3+,Yb3+ and Tm3+,Yb3+ are analysed. Besides the Stokes luminescence, the anti- Stokes emission upon infrared excitation (upconversion and black body radiation) is also analysed and discussed. The comparison of the luminescence characteristics in materials with different dimensions allowed to analyse the effect of size in the luminescent properties of the dopant lanthanide ions. The potentialities of application of the produced luminescent materials in solid state light, biosensors and pressure sensors are explored taking into account their studied characteristics.

Desempenho de soja associado à posição do fertilizante e tamanho de sementes

The seed size used for seeding has caused doubts among soybean producers. The study aimed to determine whether there may be differences between seed size with respect to depth of fertilizer deposition. The field experiment was conducted at the Experimental Area UTFPR Campus Pato Branco, using a precision seeder for direct seeding. The design was a randomized blocks, with five repetitions. The treatments were composed by the combination of two seed sizes (large seed with 6,5 mm and 5,5 mm with small seed) and two fertilizer deposition depths in relation to the seed (fertilizer near the seed with about 3 cm away and fertilizer distant from the seeds with about 10 cm). Data were subjected to analysis of variance. When the test value F was significant at 5% probability was applied to the Duncan test for comparison of means. The shallower depth of fertilizer deposition provided larger number of pods per plant and increased number of grains per plant. Already the largest depth of fertilizer deposition provided greater plant height at 30 days after sowing and R2 stage, greater ground area mobilized, higher plant population in all periods, greater depth of deposition of seeds and a higher rate of emergency speed.

Aplicação da metodologia numérica “fast bounds crack” para uma estimativa eficiente da evolução do tamanho de trinca

A significant part of the life of a mechanical component occurs, the crack propagation stage in fatigue. Currently, it is had several mathematical models to describe the crack growth behavior. These models are classified into two categories in terms of stress range amplitude: constant and variable. In general, these propagation models are formulated as an initial value problem, and from this, the evolution curve of the crack is obtained by applying a numerical method. This dissertation presented the application of the methodology "Fast Bounds Crack" for the establishment of upper and lower bounds functions for model evolution of crack size. The performance of this methodology was evaluated by the relative deviation and computational times, in relation to approximate numerical solutions obtained by the Runge-Kutta method of 4th explicit order (RK4). Has been reached a maximum relative deviation of 5.92% and the computational time was, for examples solved, 130,000 times more higher than achieved by the method RK4. Was performed yet an Engineering application in order to obtain an approximate numerical solution, from the arithmetic mean of the upper and lower bounds obtained in the methodology applied in this work, when you don’t know the law of evolution. The maximum relative error found in this application was 2.08% which proves the efficiency of the methodology "Fast Bounds Crack".

PRODUÇÃO DE MUDAS DE UMBUZEIRO ( Spondias tuberosa Arruda Câmara) EM DIFERENTES SUBSTRATOS E TAMANHO DE RECIPIENTES

A espécie Spondias tuberosa Arr. Cam. (umbuzeiro) destaca-se como uma das espécies arbóreas de maior potencial do semiárido brasileiro. Apesar de sua relevante importância socioeconômica e ambiental, há falta de estudos voltados para o estabelecimento de um modelo de produção de mudas da espécie. O objetivo desse trabalho foi avaliar a produção de mudas de Spondias tuberosa utilizando diferentes substratos e tamanho de recipientes. O experimento foi conduzido no viveiro do Laboratório de Ecologia Vegetal (LEV) do Centro de Ciências Agrárias (CCA) da Universidade Federal da Paraíba (UFPB), Areia - PB. O delineamento experimental usado foi em blocos casualizados em esquema fatorial 2 x 7 e parcelas subdivididas, sendo que os recipientes representaram as parcelas e os substratos as subparcelas. Foram utilizados substratos formulados a partir da mistura de terra de subsolo (37,5-100%), areia lavada (12,5- 25%) e esterco bovino curtido (10-50%). Os recipientes utilizados foram sacos de polietileno preto com volumes de 1900 cm3 (15 x 27 cm) e 5000 cm3 (25 x 26 cm). Para a obtenção das plântulas, sementes de Spondias tuberosa foram semeadas em sementeira de alvenaria até a repicagem (90 dias após o semeio). Aos 78 dias, após a repicagem, as mudas foram avaliadas quanto à altura, diâmetro do colo, relação altura/ diâmetro do colo, diâmetro do xilopódio, comprimento de raiz, massa seca da parte aérea e raiz. Os dados obtidos foram submetidos à análise de variância e ao teste F, sendo as médias comparadas pelo teste de Tukey ao nível de 5% de probabilidade, utilizando o software SISVAR®. Os substratos com esterco bovino curtido proporcionaram os maiores valores em altura e comprimento de raiz. Para a produção de mudas de Spondias tuberosa, é recomendado o substrato contendo terra de subsolo (45%) + Areia (15%) + Esterco bovino (40%).

Determinantes da Estrutura de Capital de Companhias Abertas Brasileiras Não-Financeiras: Um Estudo Empírico com Dados em Painel

When a company desires to invest in a project, it must obtain resources needed to make the investment. The alternatives are using firm s internal resources or obtain external resources through contracts of debt and issuance of shares. Decisions involving the composition of internal resources, debt and shares in the total resources used to finance the activities of a company related to the choice of its capital structure. Although there are studies in the area of finance on the debt determinants of firms, the issue of capital structure is still controversial. This work sought to identify the predominant factors that determine the capital structure of Brazilian share capital, non-financial firms. This work was used a quantitative approach, with application of the statistical technique of multiple linear regression on data in panel. Estimates were made by the method of ordinary least squares with model of fixed effects. About 116 companies were selected to participate in this research. The period considered is from 2003 to 2007. The variables and hypotheses tested in this study were built based on theories of capital structure and in empirical researches. Results indicate that the variables, such as risk, size, and composition of assets and firms growth influence their indebtedness. The profitability variable was not relevant to the composition of indebtedness of the companies analyzed. However, analyzing only the long-term debt, comes to the conclusion that the relevant variables are the size of firms and, especially, the composition of its assets (tangibility).This sense, the smaller the size of the undertaking or the greater the representation of fixed assets in total assets, the greater its propensity to long-term debt. Furthermore, this research could not identify a predominant theory to explain the capital structure of Brazilian

Emissão UAb n.º 15, do dia 3 de julho de 2011 : mesa redonda sobre o pescado

Emissão UAb n.º 15, do dia 3 de julho de 2011: mesa redonda sobre o pescado, com a participação das Professoras Ana Pinto de Moura e Sónia Seixas (minutos 19:21-26:44)