Plasma nitriding of AA2011 alloy and surface characterization by NDT techniques

Al-Cu alloys are widely used in the aerospace and automotive industries due to their high specific strength in some tempered conditions. However, due to poor corrosion and wear resistance, they are often anodized and/or painted. Plasma nitriding has been proposed as an alternative, though the developments in this technique are still in a recent stage for Al alloys. Electrical characterization techniques are well implemented NDTs in the industry because of good accuracy associated with lower cost, compared to other methods. Some, like eddy currents and 4-point probe techniques, are often used in coating inspection. The objective of this study was to perform Al nitriding at low temperatures to minimize the tempering initial condition damage and to assess the feasibility of eddy currents technique as a method for evaluating surface properties. The work developed can be divided in two stages. The first one was the process tuning, done at the Shibaura Institute of Technology, in Tokyo; and the second was the electrical characterization done in Faculdade de Ciências e Tecnologia, UNL. Low temperature nitriding of AA2011 alloy specimens was successfully achieved. Electrical conductivity results show that lift-off measurements by eddy currents testing can be related to surface properties.

Surgical treatment of endocrine exophthalmos by removal of orbital fat: clinical experience

PURPOSE: To report a series of 73 patients with endocrine exophthalmos treated by removal of orbital fat using the transpalpebral approach during the period 1989 to 1999. METHODS: The operation was performed according to the technique described by Olivari. Aesthetic analysis was done preoperatively and postoperatively (more than 6 months after surgery). The number of complications was also observed. RESULTS: The average volume of resected fat was approximately 7.6 mL per orbit. No major complication was observed. In 9 patients with epiphora, all improved. One patient developed postoperative diplopia and 5 complained of temporary diplopia. Appearance improved in 62 patients (85%). CONCLUSION: Surgical removal of orbital fat associated with endocrine exophthalmos provides consistent improvement in appearance with a low rate of complications. Additional procedures may be indicated to improve the cosmetic outcome.

Nutrition for the pediatric surgical patient: approach in the peri-operative period

Nutrition is essential for maintenance of physiologic homeostasis and growth. Hypermetabolic states lead to a depletion of body stores, with decreased immunocompetence and increased morbidity and mortality. The purpose of this paper is to provide an update regarding the provision of appropriate nutrition for the pediatric surgical patient, emphasizing the preoperative and postoperative periods. Modern nutritional support for the surgical patient comprises numerous stages, including assessment of nutritional status, nutritional requirements, and nutritional therapy. Nutritional assessment is performed utilizing the clinical history, clinical examination, anthropometry, and biochemical evaluation. Anthropometric parameters include body weight, height, arm and head circumference, and skinfold thickness measurements. The biochemical evaluation is conducted using determinations of plasma levels of proteins, including album, pre-albumin, transferrin, and retinol-binding protein. These parameters are subject to error and are influenced by the rapid changes in body composition in the peri-operative period. Nutritional therapy includes enteral and/or parenteral nutrition. Enteral feeding is the first choice for nutritional therapy. If enteral feeding is not indicated, parenteral nutrition must be utilized. In all cases, an individualized, adequate diet (enteral formula or parenteral solution) is obligatory to decrease the occurrence of overfeeding and its undesirable consequences.

Endovascular techniques for placement of long-term chemotherapy catheters

PURPOSE: To analyze the results from using endovascular techniques to place long-term chemotherapy catheters when advancing the catheter using the external jugular vein is difficult due to obstructions or kinking. METHODS: Between July 1997 and August 2000, 320 long-term chemotherapy catheters were placed, and in 220 cases the external jugular vein was used as the primary venous approach. In 18 of these patients, correct positioning was not achieved and several endovascular techniques were then utilized to overcome these obstacles, including manipulation of a J-wire with a moveable core, venography, and the exchange wire technique. RESULTS: In 94.5% of the patients with difficulties in obtaining the correct positioning, we were able to advance the long-term catheter to the desired position with the assistance of endovascular techniques. CONCLUSIONS: Venography and endovascular guidance techniques are useful for the placement of long-term catheters in the external jugular vein.

Surgical treatment of rectal prolapse: experience and late results with 51 patients

The "best" surgical technique for the management of complete rectal prolapse remains unknown. Due to its low incidence, it is very difficult to achieve a representative number of cases, and there are no large prospective randomized trials to attest to the superiority of one operation over another. PURPOSE: Analyze the results of surgical treatment of complete rectal prolapse during 1980 and 2002. METHOD: Retrospective study. RESULTS: Fifty-one patients underwent surgical treatment during this period. The mean age was 56.7 years, with 39 females. Besides the prolapse itself, 33 patients complained of mucous discharge, 31 of fecal incontinence, 14 of constipation, 17 of rectal bleeding, and 3 of urinary incontinence. Abdominal operations were performed in 36 (71%) cases. Presacral rectopexy was the most common abdominal procedure (29 cases) followed by presacral rectopexy associated with sigmoidectomy (5 cases). The most common perineal procedure was perineal rectosigmoidectomy associated with levatorplasty (12 cases). Intraoperative bleeding from the presacral space developed in 2 cases, and a rectovaginal fistula occurred in another patient after a perineal rectosigmoidectomy. There were 2 recurrences after a mean follow-up of 49 months, which were treated by reoperation. CONCLUSION: Abdominal and perineal procedures can be used to manage complete rectal prolapse with safety and good long-term results. Age, associated medical conditions, and symptoms of fecal incontinence or constipation are the main features that one should bear in mind in order to choose the best surgical approach.

The reasons behind the progression in PISA scores: An education production function approach using semi-parametric techniques

Research Masters

Toxicity measurement techniques for building materials with wastes

The innovative Horizon 2020 program sponsored by the European Union (EU) aims to promote and develop processes of waste integration in construction materials. However, several potential health hazards caused by building materials have been identified and, there-fore, there is an ongoing need to develop new recycling methods for hazardous wastes and effi-cient barriers in order to prevent toxic releases from the new construction solutions with wastes. This paper presents an overview that focus on two main aspects: the identification of the health risks related to radioactivity and heavy metals present in building materials and identification of these toxic substances in new construction solutions that contain recycled wastes. Different waste materials were selected and distinct methodologies of toxicity evaluation are presented to analyse the potential hazardous, the feasibility of using those wastes and the achievement of op-timal construction solutions involving wastes.

Ancient materials and techniques to improve the earthen building durability

A substantial part of the world building heritage has been performed by earthen building. The durability of this existing heritage and mainly of the new buildings built with earth is particularly conditioned by the erosion caused by water action, especially in countries with high levels of rainfall. This research aims to contribute to the increase of knowledge about the ancient building techniques that provide enhanced durability. It is possible to analyse the ancestral practices used to protect the earth material from the water action in order to understand how the old earthen buildings were preserved over the centuries, resisting to harsh weather conditions. Among these techniques are: the incorporation of biopolymers (such as oils or fats from animal or vegetable origin); the addition of some minerals; and the earth stabilization with lime. However, this knowledge seems to be forgotten, probably due to the prejudice related to earthen constructions, which several times are associated with a poor building. This research also focuses on the study of new methods of earth stabilization with lime and biopolymers, adapting the ancient knowledge to improve the durability related to the water action. Therefore, alternative solutions can be obtained to improve the performance of earthen buildings, mainly the resistance of the material in the presence of water, reducing its permeability to water. In addition, with the proposed solutions it is possible to obtain good levels of water vapour permeability, one of the major advantages of the construction with earth.

Implementation and comparison of different switching techniques for shunt active power filters

This paper presents a comparison between three switching techniques that can be used in three-phase four-wire Shunt Active Power Filters (SAPFs). The implemented switching techniques are: Periodic-Sampling (PS), Triangular Carrier Pulse-Width Modulation (TC-PWM) and Space Vector PWM (SVPWM). The comparison between them is made in terms of the compensated currents THD%, implementation complexity, necessary CPU time and SAPF efficiency. To perform this comparison are presented and analyzed several experimental results, obtained with a 20 kVA Shunt Active Power Filter prototype, specially developed for this purpose. The control system of the developed SAPF is based in the p-q Theory with a grid synchronization algorithm p-PLL.

Refinement and variability techniques in model transformation of software requirements

Tese de Doutoramento em Tecnologias e Sistemas de Informação

Rockburst laboratory tests database - Application of data mining techniques

Rockburst is characterized by a violent explosion of a block causing a sudden rupture in the rock and is quite common in deep tunnels. It is critical to understand the phenomenon of rockburst, focusing on the patterns of occurrence so these events can be avoided and/or managed saving costs and possibly lives. The failure mechanism of rockburst needs to be better understood. Laboratory experiments are undergoing at the Laboratory for Geomechanics and Deep Underground Engineering (SKLGDUE) of Beijing and the system is described. A large number of rockburst tests were performed and their information collected, stored in a database and analyzed. Data Mining (DM) techniques were applied to the database in order to develop predictive models for the rockburst maximum stress (σRB) and rockburst risk index (IRB) that need the results of such tests to be determined. With the developed models it is possible to predict these parameters with high accuracy levels using data from the rock mass and specific project.

Global vs. local nonlinear optimization techniques for human-like movement of an anthropomorphic robot

In this paper a comparison between using global and local optimization techniques for solving the problem of generating human-like arm and hand movements for an anthropomorphic dual arm robot is made. Although the objective function involved in each optimization problem is convex, there is no evidence that the admissible regions of these problems are convex sets. For the sequence of movements for which the numerical tests were done there were no significant differences between the optimal solutions obtained using the global and the local techniques. This suggests that the optimal solution obtained using the local solver is indeed a global solution.

Relatório sobre “Surgical cases packages”

Problema apresentado pelo Hospital de Braga no 109th European Study Group with Industry 10 a 15 de maio de 2015. Departamento de Produção e Sistemas Escola de Engenharia da Universidade do Minho Guimarães Portugal 24 de julho de 2015

Accuracy comparison of implant impression techniques: A systematic review

Background Several studies link the seamless fit of implant-supported prosthesis with the accuracy of the dental impression technique obtained during acquisition. In addition, factors such as implant angulation and coping shape contribute to implant misfit. Purpose To identify the most accurate impression technique and factors affecting the impression accuracy. Material and Methods A systematic review of peer-reviewed literature was conducted analyzing articles published between 2009 and 2013. The following search terms were used: implant impression, impression accuracy, and implant misfit. A total of 417 articles was identified, 32 were selected for review. Results All 32 selected studies refer to in vitro studies. Fourteen articles compare open and closed impression technique, 8 advocate the open technique and 6 report similar results. Other 14 articles evaluate splinted and non-splinted techniques; all advocating the splinted technique. Polyether material usage was reported in 9; 6 studies tested vinyl polysiloane and 1 study used irreversible hydrocolloid. Eight studies evaluated different copings designs. Intra-oral optical devices were compared in 4 studies. Conclusions The most accurate results were achieved with two configurations: (1) the optical intra-oral system with powder; and (2) the open technique with splinted squared transfer copings, using polyether as impression material.

The role of liquid-based cytology and ancillary techniques in pleural and pericardic effusions: An institutional experience

BACKGROUND: Fine-needle aspiration cytology (FNAC) of serous membrane effusions may fulfil a challenging role in the diagnostic analysis of both primary and metastatic disease. From this perspective, liquid-based cytology (LBC) represents a feasible and reliable method for empowering the performance of ancillary techniques (ie, immunocytochemistry and molecular testing) with high diagnostic accuracy. METHODS: In total, 3171 LBC pleural and pericardic effusions were appraised between January 2000 and December 2013. They were classified as negative for malignancy (NM), suspicious for malignancy (SM), or positive for malignancy (PM). RESULTS: The cytologic diagnoses included 2721 NM effusions (2505 pleural and 216 pericardic), 104 SM effusions (93 pleural and 11 pericardic), and 346 PM effusions (321 pleural and 25 pericardic). The malignant pleural series included 76 unknown malignancies (36 SM and 40 PM effusions), 174 metastatic lesions (85 SM and 89 PM effusions), 14 lymphomas (3 SM and 11 PM effusions), 16 mesotheliomas (5 SM and 11 SM effusions), and 3 myelomas (all SM effusions). The malignant pericardic category included 20 unknown malignancies (5 SM and 15 PM effusions), 15 metastatic lesions (1 SM and 14 PM effusions), and 1 lymphoma (1 PM effusion). There were 411 conclusive immunocytochemical analyses and 47 molecular analyses, and the authors documented 88% sensitivity, 100% specificity, 98% diagnostic accuracy, 98% negative predictive value, and 100% positive predictive value for FNAC. CONCLUSIONS: FNAC represents a primary diagnostic tool for effusions and a reliable approach with which to determine the correct follow-up. Furthermore, LBC is useful for ancillary techniques, such as immunocytochemistry and molecular analysis, with feasible diagnostic and predictive utility.