846 resultados para Screen-printed electrode
Resumo:
Ceramics are known to be chemically stable, and the possibility to electrically dope polymer-derived ceramics makes it a material of interest for implantable electrode applications. We investigated cytotoxic characteristics of four polymer-derived ceramic candidates with either electrically conductive or insulating properties. Cytotoxicity was assessed by culturing C2C12 myoblast cells under two conditions: by exposing them to material extracts and by putting them directly in contact with material samples. Cell spreading was optically evaluated by comparing microscope observations immediately after the materials insertion and after 24 h culturing. Cell viability (MTT) and mortality (LDH) were quantified after 24-h incubation in contact with the materials. Comparison was made with biocompatible positive references (alumina, platinum, biocompatible stainless steel 1.4435), negative references (latex, stainless steel 1.4301) and controls (no material present in the culture wells). We found that the cytotoxic properties of tested ceramics are comparable to established reference materials. These ceramics, which are reported to be very stable, can be microstructured and electrically doped to a wide range of conductivity and are thus excellent candidates for implantable electrode applications including pacemakers.
Resumo:
OBJECTIVE Cochlear implants (CIs) have become the gold standard treatment for deafness. These neuroprosthetic devices feature a linear electrode array, surgically inserted into the cochlea, and function by directly stimulating the auditory neurons located within the spiral ganglion, bypassing lost or not-functioning hair cells. Despite their success, some limitations still remain, including poor frequency resolution and high-energy consumption. In both cases, the anatomical gap between the electrode array and the spiral ganglion neurons (SGNs) is believed to be an important limiting factor. The final goal of the study is to characterize response profiles of SGNs growing in intimate contact with an electrode array, in view of designing novel CI devices and stimulation protocols, featuring a gapless interface with auditory neurons. APPROACH We have characterized SGN responses to extracellular stimulation using multi-electrode arrays (MEAs). This setup allows, in our view, to optimize in vitro many of the limiting interface aspects between CIs and SGNs. MAIN RESULTS Early postnatal mouse SGN explants were analyzed after 6-18 days in culture. Different stimulation protocols were compared with the aim to lower the stimulation threshold and the energy needed to elicit a response. In the best case, a four-fold reduction of the energy was obtained by lengthening the biphasic stimulus from 40 μs to 160 μs. Similarly, quasi monophasic pulses were more effective than biphasic pulses and the insertion of an interphase gap moderately improved efficiency. Finally, the stimulation with an external electrode mounted on a micromanipulator showed that the energy needed to elicit a response could be reduced by a factor of five with decreasing its distance from 40 μm to 0 μm from the auditory neurons. SIGNIFICANCE This study is the first to show electrical activity of SGNs on MEAs. Our findings may help to improve stimulation by and to reduce energy consumption of CIs and thereby contribute to the development of fully implantable devices with better auditory resolution in the future.
Resumo:
Workshop „The Narrative in Eastern and Western Art“, Graduate School of Letters, Kyoto, 2-5 December 2013 Abstract by Ivo Raband, University of Berne Printed Narrative: The Festival Books for Ernest of Austria from Brussels and Antwerp 1594 During the early modern period the medium of the festival book became increasingly more important as an object of ‘political narration’ throughout Europe. Focusing on Netherlandish examples from the sixteenth and seventeenth centuries, my talk will focus on the festival books printed for the Joyous Entries of Archduke Ernest of Austria (1553–1595). Ernest was appointed Governor General of the Netherlands by King Philipp II in 1593, being the first Habsburg Prince to reside in Brussels since 30 years. In Brussels and Antwerp, the Archduke was greeted with the traditional Blijde Imkomst, Joyous Entry, which dates back to the fourteenth century and was a necessity to actually become the sovereign of Brabant and Antwerp and to uphold the privileges of the cities. Decorated with ephemeral triumphal arches, stages, and tableaux vivants, both cities welcomed Ernest and, at the same time, demonstrated their civic self-assurance and negotiated their statuses. In honor of these events of civic power, the city magistrates commissioned festival books. These books combine a Latin text with a description of the events and the ephemeral structures, including circa 30 engravings and etchings. Being the only visual manifestation of the Joyous Entries, the books became important representational objects. The prints featured in festival books will be my point of departure for discussing the importance of narrative political prints and the concept of the early modern festival book as a ‘political object’. By comparing the prints from Ernest’s entries with others from the period between 1549 and 1635, I will show how the prints became as important as the event itself. Thus, I want to pose the question of whether it would have been possible to substitute a printed version of the event for the actual ceremony.
Resumo:
BACKGROUND Deep brain stimulation (DBS) is recognized as an effective treatment for movement disorders. We recently changed our technique, limiting the number of brain penetrations to three per side. OBJECTIVES The first aim was to evaluate the electrode precision on both sides of surgery since we implemented this surgical technique. The second aim was to analyse whether or not the electrode placement was improved with microrecording and macrostimulation. METHODS We retrospectively reviewed operation protocols and MRIs of 30 patients who underwent bilateral DBS. For microrecording and macrostimulation, we used three parallel channels of the 'Ben Gun' centred on the MRI-planned target. Pre- and post-operative MRIs were merged. The distance between the planned target and the centre of the implanted electrode artefact was measured. RESULTS There was no significant difference in targeting precision on both sides of surgery. There was more intra-operative adjustment of the second electrode positioning based on microrecording and macrostimulation, which allowed to significantly approach the MRI-planned target on the medial-lateral axis. CONCLUSION There was more electrode adjustment needed on the second side, possibly in relation with brain shift. We thus suggest performing a single central track with electrophysiological and clinical assessment, with multidirectional exploration on demand for suboptimal clinical responses.
Resumo:
Domestic violence is a major public health problem, yet most physicians do not effectively identify patients at risk. Medical students and residents are not routinely educated on this topic and little is known about the factors that influence their decisions to include screening for domestic violence in their subsequent practice. In order to assess the readiness of primary care residents to screen all patients for domestic violence, this study utilized a survey incorporating constructs from the Transtheoretical Model, including Stages of Change, Decisional Balance (Pros and Cons) and Self-Efficacy. The survey was distributed to residents at the University of Texas Health Science Center Medical School in Houston in: Internal Medicine, Medicine/Pediatrics, Pediatrics, Family Medicine, and Obstetrics and Gynecology. Data from the survey was analyzed to test the hypothesis that residents in the earlier Stages of Change report more costs and fewer benefits with regards to screening for domestic violence, and that those in the later stages exhibit higher Self-Efficacy scores. The findings from this study were consistent with the model in that benefits to screening (Pros) and Self-Efficacy were correlated with later Stages of Change, however reporting fewer costs (Cons) was not. Very few residents were ready to screen all of their patients.^
Resumo:
This descriptive systematic review describes intervention trials for children and youth that targeted screen time (ST) as a way to prevent or control obesity and measured ST, and at least one of the following: physical activity, dietary intake, and adiposity. Both “hands-on” (e.g., video games) and “hands free” (e.g., television viewing) ST were included. Published, completed intervention trials (k=12), not-yet-published, completed trials (k=6), and in-progress trials (k=11) were identified through searches of electronic databases, including trial registries and bibliographies of eligible study reports. Study characteristics of the 29 identified trials were coded and presented in evidence tables. Considerable attention was paid to the type of ST addressed, measures used, and the type of interventions. Based on the number of in-progress and not-yet-published trials, the number of completed, published reports will double in the next three years. Most of the studies were funded by federal sources. General populations, not restricted by race, gender, or weight status, were targets of most interventions with children ages 9-12 yeas as the modal age group. Most trials used randomized control trials in which the majority of control or comparison group received an intervention. The mean number of participants was 242.8 (SD=314.7) and interventions were delivered over an average of 10.5 months and consisted of approximately 16 sessions, with a total time of about eight hours. The majority of completed trials evaluate each of the four constructs, however, most studies have more than one measure to assess each construct (e.g., BMI and tricep skinfold thickness to evaluate adiposity) and rarely did studies use the same measures. This is likely why the majority of studies produced at least one significant intervention effect on each outcome that was assessed. The four major outcomes should be evaluated in all interventions attempting to reduce screen time in order to determine the mechanisms involved that may contribute to obesity. More importantly researchers should work together to determine the best measures to evaluate the four main constructs to allow studies to be compared. Another area for consensus is the definition of ST. ^
Resumo:
Background. The high prevalence of obesity among children has spurred creation of a list of possible causative factors, including the advertising of foods of minimal nutritional value, a decrease in physical activity, and increased media use. Few studies show prevalence rates of these factors among large cohorts of children. ^ Methods. Using data from the 2004-2005 School Physical Activity and Nutrition project (SPAN), a secondary analysis of 7907 4th-grade children (mean age 9.74 years) was conducted. In addition, a comic-book–based intervention that addressed advertised food consumption, physical activity, and media use was developed and evaluated using a pre-post test design among 4th-grade children in an urban school district. ^ Results. Among a cohort of 4th-grade children across the state of Texas, children who had more than 2 hours of video game or computer time the previous day were more than twice as likely to drink soda and eat candy or pastries. In addition, children who watched more than 2 hours of TV the previous day were more than three times as likely to consume chips, punch, soda, candy, frozen desserts, or pastries (AOR 3.41, 95% CI: 1.58, 7.37). A comic-book based intervention held great promise and acceptance among 4th-grade children. Outcome evaluation showed that while results moved in a positive direction, they were not statistically significant. ^ Conclusion. Statistically significant associations were found between screen time and eating various types of advertised food. The comic book intervention was widely accepted by the children exposed to it, and pre-post surveys indicated they moved constructs in a positive direction. Further research is needed to look at more specific ways in which children are exposed to TV, and the relationship of the TV viewing time with their consumption of advertised foods. In addition, researchers should look at comic book interventions more closely and attempt to utilize them in more in studies with a longer follow-up time. ^
Resumo:
In spite of the increasing presence of Semantic Web Facilities, only a limited amount of the available resources in the Internet provide a semantic access. Recent initiatives such as the emerging Linked Data Web are providing semantic access to available data by porting existing resources to the semantic web using different technologies, such as database-semantic mapping and scraping. Nevertheless, existing scraping solutions are based on ad-hoc solutions complemented with graphical interfaces for speeding up the scraper development. This article proposes a generic framework for web scraping based on semantic technologies. This framework is structured in three levels: scraping services, semantic scraping model and syntactic scraping. The first level provides an interface to generic applications or intelligent agents for gathering information from the web at a high level. The second level defines a semantic RDF model of the scraping process, in order to provide a declarative approach to the scraping task. Finally, the third level provides an implementation of the RDF scraping model for specific technologies. The work has been validated in a scenario that illustrates its application to mashup technologies
Resumo:
Objective. The influence of an exercise programme performed by healthy pregnant women on maternal glucose tolerance was studied. Study design. A physical activity (PA, land/aquatic activities) programme during the entire pregnancy (three sessions per week) was conducted by a qualified instructor. 83 healthy pregnant women were randomly assigned to either an exercise group (EG, n=40) or a control (CG, n=43) group. 50 g maternal glucose screen (MGS), maternal weight gain and several pregnancy outcomes were recorded. Results. Significant differences were found between study groups on the 50 g MGS. Values corresponding to the EG (103.8±20.4 mg/dl) were better than those of the CG (126.9±29.5 mg/dl), p=0.000. In addition, no differences in maternal weight gain and no cases of gestational diabetes in EG versus 3 in CG (7%) (p>0.05) were found. Conclusion. A moderate PA programme performed during pregnancy improves levels of maternal glucose tolerance.
Resumo:
A theoretical model for the steady-state response of anodic contactors that emit a plasma current Ii and collect electrons from a collisionless, unmagnetized plasma is presented. The use of a (kinetic) monoenergetic population for the attracted species, well known in passive probe theory, gives both accuracy and tractability to the theory. The monoenergetic population is proved to behave like an isentropic fluid with radial plus centripetal motion, allowing direct comparisons with ad hoc fluid models. Also, a modification of the original monoenergetic equations permits analysis of contactors operating in orbit-limited conditions. Besides that, the theory predicts that, only for plasma emissions above certain threshold current a presheath/double layer/core structure for the potential is formed (the core mode), while for emissions below that threshold, a plasma contactor behaves exactly as a positive-ion emitter with a presheath/sheath structure (the no-core mode). Ion emitters are studied as a particular case. Emphasis is placed on obtaining dimensionless charts and approximate asymptotic laws of the current-voltage characteristic.
Resumo:
En este proyecto, se ha desarrollado una aplicación electrónica para un coche de competición, en concreto para la fórmula SAE (Society of Automotive Engineers), una competición universitaria en la que cada equipo, formado por estudiantes, debe diseñar, construir y probar un prototipo basándose en una serie de reglas. El objetivo final de la competición es proporcionar a los estudiantes el conocimiento práctico necesario para su futura labor profesional, del cual se pensaba que los estudiantes adolecían al acabar sus estudios universitarios cuando se creó esta competición. La aplicación desarrollada en este proyecto consiste en un sistema de telemetría, utilizado para transmitir los datos proporcionados por los sensores del vehículo a través de un sistema de radiofrecuencia, de manera que se pueda estudiar el comportamiento del coche durante los ensayos a la vez que el coche está rodando y así no depender de un sistema de adquisición de datos del que había que descargarse la información una vez finalizada la sesión de ensayo, como había que hacer hasta el momento. Para la implementación del proyecto, se ha utilizado un kit de desarrollo (Xbee Pro 868) que incluye dos módulos de radio, dos placas de desarrollo, dos cables USB y una antena, el cual ha permitido desarrollar la parte de radio del proyecto. Para transmitir los datos proporcionados por la centralita del vehículo, la cual recoge la información de todos los sensores presentes en el vehículo, se han desarrollado dos placas de circuito impreso. La primera de ellas tiene como elemento principal un microprocesador PIC de la marca Microchip (PIC24HJ64GP502), que recoge los datos proporcionados por la centralita del vehículo a través de su bus CAN de comunicaciones. La segunda placa de circuito impreso tiene como elemento fundamental el transmisor de radio. Dicho transmisor está conectado al microprocesador de la otra placa a través de línea serie. Como receptor de radio se ha utilizado una de las placas de prueba que integraba el kit de desarrollo Xbee Pro 868, la cual recoge los datos que han sido enviados vía radio y los manda a su vez a través de USB a un ordenador donde son monitorizados. Hasta aquí la parte hardware del sistema. En cuanto a la parte software, ha habido que desarrollar una aplicación en lenguaje C, que ejecuta el microprocesador PIC, que se encarga de recoger los datos enviados por la centralita a través del bus CAN (Controller Area Network) y transmitirlos a través de línea serie al chip de radio. Por último, para la monitorización de los datos se han desarrollado dos aplicaciones en LabVIEW, una que recoge los datos a través de USB, los muestra en pantalla y los guarda en un fichero y otra que lee los datos del fichero y los representa gráficamente para permitir un estudio más detallado del comportamiento del vehículo. ABSTRACT In this project, an electronic application has been developed for a race car – Formula SAE car-. Formula SAE is a university championship in which each team, made up of students, should design, construct and test a prototype within certain rules. The final goal of the competition is to enhance the practical knowledge of the students, which was thougth to be poor at the time the competition was created. The application developed in this project consists of a telemetry system, employed to transmit the data provided by the car’s sensors through a radio frequency system, so that it could be possible to study the behaviour of the vehicle during tests and do not depend on a datalogger system as it occurred until now. To carry out the radio module of the project, a Xbee Pro 868 development kit has been used, which includes two radio modules, two development boards, two USB cables and an antenna. To transmit the data provided by the ECU (Engine Control Unit) of the vehicle, which receives information from all the sensors the vehicle has, two printed circuit boards have been built. One of them has a PIC microprocessor of Microchip (PIC24HJ64GP502) which receives the data coming from CAN bus of the ECU. Tha main element of the other printed circuit board is the radio transmitter. This chip receives the data from the microprocessor through its serial line. The development board of the Xbee Pro 868 has been used as receiver. When data arrives to the receiver, it transmits them to a computer through USB where the data are displayed. All this composes the hardware of the system. Regarding the software, a C coded application has been developed. This application is executed by the microprocessor and its function is to receive the data from the bus CAN (Controller Area Network) and send them to the radio transmitter through the microprocessor’s serial line. To show the data on the computer, two LabVIEW applications has been developed. The first one receives the data through the USB port, displays them on the screen and save them to a file and the second one reads the data from the file while represents them graphically to allow studying the behaviour of the car on track.
Resumo:
Thermal imaging has been used to evaluate the response to drought and warm temperatures in a collection of Brachypodium distachyon lines adapted to varied environmental conditions. Thermographic records were able to separate lines from contrasting rainfall regimes. Genotypes from dryer environments showed warmer leaves under water deficit, which suggested that decreased evapotranspiration was related to a more intense stomatal closure. When irrigated and under high temperature conditions, drought-adapted lines showed cooler leaves than lines from wetter zones. The consistent, inverse thermographic response of lines to water stress and heat validates the reliability of this method to assess drought tolerance in this model cereal. It additionally supports the hypothesis that stomatal-based mechanisms are involved in natural variation for drought tolerance in Brachypodium. The study further suggests that these mechanisms are not constitutive but likely related to a more efficient closing response to avoid dehydration in adapted genotypes. Higher leaf temperature under water deficit seems a dependable criterion of drought tolerance, not only in B. distachyon but also in the main cereal crops and related grasses where thermography can facilitate high-throughput preliminary screening of tolerant materials.