Influência do método de aquecimento de revestimentos fosfatados sobre sua resistência à compressão e sobre a rugosidade de superfície e estabilidade dimensional de ligas de Ni-Cr e Ni-Cr-Ti

Pós-graduação em Odontologia - FOA

Estudo metaloproteômico do mércurio em amostras de tecido hepático de peixes coletados na área de influência do AHE JIRAU - Bacia do rio Madeira

Pós-graduação em Biologia Geral e Aplicada - IBB

O grafeno versus gás de elétrons 2d: filtro fano relativístico de spins por meio de pontas de afm e stm

Pós-graduação em Ciência dos Materiais - FEIS

Two-and tridimensional analysis of periapical repair after endodontic surgery

Objective The aim of this study was to evaluate repair after endodontic surgery using two- and tridimensional imaging methods. Materials and methods Periapical radiographs and cone beam computed tomography (CBCT) were performed before the surgeries and after 48 h (baseline), 4 months, and 8 months. The area (square millimeters) of periapical lesions in CBCT and in radiographs was compared regarding the percentage of repair. In the CBCT, multiple areas were converted to volume. Repeated-measures analyses and paired t tests (α=0.05) were used to compare the methods. Correlation coefficients were calculated between the periods of evaluation within the CBCT volumetric analysis. Bland-Altman plots were used to compare the methods, based on the 95 % limits of agreement for the difference of the means. Results Baseline showed a larger lesion volume (192.54 mm3 ) than 4-month (79.79 mm3 ) and 8-month (47.51 mm3 ) periods. No differences were found in the percentage of repair in the first 4 months and after 8 months. The volumetric analysis showed a higher percentage of repair when the first and last 4 months were compared. No differences were found in the percentage of repair by area in the CBCTs. Repair of 73 % was obtained after 8 months. Similar results were observed by the Bland-Altman agreement analyses. Conclusions The percentage of repair varied after 8 months, when lower values were obtained by volumetric evaluation. Clinical relevance Considering the outcome at follow-up periods over 4 months, tridimensional evaluation by CBCT is more capable of determining the absence of periapical bone repair than conventional two-dimensional radiographs. Therefore, the use of CBCT would be suggested only for more complex cases with slower evolution of repair or for the association of factors that make prognosis difficult after surgery.

Análise comparativa dos resultados obtidos pelos métodos de calibração de campo tridimensional e bidimensional

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Weakly bound states of two- and three-boson systems in the crossover from two to three dimensions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Search for heavy neutrinos and W bosons with right-handed couplings in proton-proton collisions at root s=8TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Detection of glucose and triglycerides using information visualization methods to process impedance spectroscopy data

In this paper we discuss the detection of glucose and triglycerides using information visualization methods to process impedance spectroscopy data. The sensing units contained either lipase or glucose oxidase immobilized in layer-by-layer (LbL) films deposited onto interdigitated electrodes. The optimization consisted in identifying which part of the electrical response and combination of sensing units yielded the best distinguishing ability. It is shown that complete separation can be obtained for a range of concentrations of glucose and triglyceride when the interactive document map (IDMAP) technique is used to project the data into a two-dimensional plot. Most importantly, the optimization procedure can be extended to other types of biosensors, thus increasing the versatility of analysis provided by tailored molecular architectures exploited with various detection principles. (C) 2012 Elsevier B.V. All rights reserved.

New Equation for Prediction of Reverse Remodeling after Cardiac Resynchronization Therapy

Objectives: To integrate data from two-dimensional echocardiography (2D ECHO), three-dimensional echocardiography (3D ECHO), and tissue Doppler imaging (TDI) for prediction of left ventricular (LV) reverse remodeling (LVRR) after cardiac resynchronization therapy (CRT). It was also compared the evaluation of cardiac dyssynchrony by TDI and 3D ECHO. Methods: Twenty-four consecutive patients with heart failure, sinus rhythm, QRS = 120 msec, functional class III or IV and LV ejection fraction (LVEF) = 0.35 underwent CRT. 2D ECHO, 3D ECHO with systolic dyssynchrony index (SDI) analysis, and TDI were performed before, 3 and 6 months after CRT. Cardiac dyssynchrony analyses by TDI and SDI were compared with the Pearson's correlation test. Before CRT, a univariate analysis of baseline characteristics was performed for the construction of a logistic regression model to identify the best predictors of LVRR. Results: After 3 months of CRT, there was a moderate correlation between TDI and SDI (r = 0.52). At other time points, there was no strong correlation. Nine of twenty-four (38%) patients presented with LVRR 6 months after CRT. After logistic regression analysis, SDI (SDI > 11%) was the only independent factor in the prediction of LVRR 6 months of CRT (sensitivity = 0.89 and specificity = 0.73). After construction of receiver operator characteristic (ROC) curves, an equation was established to predict LVRR: LVRR =-0.4LVDD (mm) + 0.5LVEF (%) + 1.1SDI (%), with responders presenting values >0 (sensitivity = 0.67 and specificity = 0.87). Conclusions: In this study, there was no strong correlation between TDI and SDI. An equation is proposed for the prediction of LVRR after CRT. Although larger trials are needed to validate these findings, this equation may be useful to candidates for CRT. (Echocardiography 2012;29:678-687)

Proteomic profiling of the rat hypothalamus

Background: The hypothalamus plays a pivotal role in numerous mechanisms highly relevant to the maintenance of body homeostasis, such as the control of food intake and energy expenditure. Impairment of these mechanisms has been associated with the metabolic disturbances involved in the pathogenesis of obesity. Since rodent species constitute important models for metabolism studies and the rat hypothalamus is poorly characterized by proteomic strategies, we performed experiments aimed at constructing a two-dimensional gel electrophoresis (2-DE) profile of rat hypothalamus proteins. Results: As a first step, we established the best conditions for tissue collection and protein extraction, quantification and separation. The extraction buffer composition selected for proteome characterization of rat hypothalamus was urea 7 M, thiourea 2 M, CHAPS 4%, Triton X-100 0.5%, followed by a precipitation step with chloroform/methanol. Two-dimensional (2-D) gels of hypothalamic extracts from four-month-old rats were analyzed; the protein spots were digested and identified by using tandem mass spectrometry and database query using the protein search engine MASCOT. Eighty-six hypothalamic proteins were identified, the majority of which were classified as participating in metabolic processes, consistent with the finding of a large number of proteins with catalytic activity. Genes encoding proteins identified in this study have been related to obesity development. Conclusion: The present results indicate that the 2-DE technique will be useful for nutritional studies focusing on hypothalamic proteins. The data presented herein will serve as a reference database for studies testing the effects of dietary manipulations on hypothalamic proteome. We trust that these experiments will lead to important knowledge on protein targets of nutritional variables potentially able to affect the complex central nervous system control of energy homeostasis.

Structural and Interaction Studies of Bacterial Polysaccharides by NMR Spectroscopy

An introduction to bacterial polysaccharides and the methods for structural determination are described in the first two parts of the thesis. In a structural elucidation of bacterial polysaccharides NMR experiments are important as is component analysis. A short description of immunochemical methods such as enzyme immunoassays is included. Two NMR techniques used for interaction studies, trNOE and STD NMR, are also discussed. The third part of the thesis discusses and summarizes the results from the included papers. The structures of the exopolysaccharides produced by two lactic acid bacteria are determined by one- and two dimensional NMR experiments. One is a heteropolysaccharide produced by Streptococcus thermophilus and the other a homopolysaccharide produced by Propionibacterium freudenreichii. The structure of an acidic polysaccharide from a marine bacterium with two serine residues in the repeating unit is also investigated. The structural and immunological relationship between two O-antigenic polysaccharides from Escherichia coli strain 180/C3 and O5 is discussed and investigated. Finally, interaction studies of an octasaccharide derived from the Salmonella enteritidis O-antigen and a bacteriophage are described which were performed with NMR experiments.

A 2D BEM-FEM approach for time harmonic fluid-structure interaction analysis of thin elastic bodies.

[EN]This paper deals with two-dimensional time harmonic fluid-structure interaction problems when the fluid is at rest, and the elastic bodies have small thicknesses. A BEM-FEM numerical approach is used, where the BEM is applied to the fluid, and the structural FEM is applied to the thin elastic bodies.

Untersuchung magnetischer Nanostrukturen mittels Rastertunnelspektroskopie und Kerr-Magnetometrie am Beispiel von Fe, Co, Co-Fe und Fe-Mn Nanostrukturen

Nach einer kurzen Einführung in die Entwicklung der magnetischen Anwendungen, werden in Kapitel 2 und 3 die physikalischen Grundlagen der Messmethoden, insbesondere die Rastertunnelspektroskopie und Kerr-Magnetometrie, sowie der experimentelle Aufbau erläutert. Kapitel 4 beschäftigt sich mit den magnetischen Eigenschaften von quasi ein-dimensionalen ferromagnetischen Nanostreifen und Monolagen, die durch Selbstorganisation auf einem Wolfram(110)-Einkristall mit vizinaler und glatter Oberfläche präpariert werden. Hierbei wird die Temperaturabhängigkeit der magnetischen Größen, wie Remanenz, Sättigungsmagnetisierung und Suszeptibilität, sowie die Auswirkung einer Abdeckung des Systems auf die Domänenwandenergie und Anisotropie untersucht. Zusätzlich wird die Kopplung von parallelen Nanostreifen in Abhängigkeit des Streifenabstandes betrachtet. In Kapitel 5 werden das Wachstum und die Morphologie von Co-Monolagen auf W(110) untersucht. Der Übergang von pseudomorphem zu dicht gepacktem Wachstum in der Monolage wird mit Hilfe der Rastertunnelspektroskopie sichtbar gemacht, ebenso wie unterschiedliche Stapelfolgen in Tripellagen Co-Systemen. Atomar aufgelöste Rastertunnelmikroskopie erlaubt die genauen Atompositionen der Oberfläche zu bestimmen und mit theoretischen Wachstumsmodellen zu vergleichen. Auf die Untersuchung zwei-dimensionaler binärer Co-Fe und Fe-Mn Legierungen auf W(110) wird in Kapitel 6 eingegangen. Mit einer Präparationstemperatur von T=520 K ist es möglich, atomar geordnete Co-Fe Legierungsmonolagen wachsen zu lassen. Ein direkter Zusammenhang zwischen der Magnetisierung und der lokalen Zustandsdichte in Abhängigkeit der Legierungszusammensetzung wird gezeigt.

Vergleichende computergestützte funktionsmorphologische Analyse an Molaren cercopithecoider Primaten

Die Analyse funktioneller Zusammenhänge zwischen Ernährung und Zahnmorphologie ist ein wichtiger Aspekt primatologischer und paläontologischer Forschung. Als überdauernder Teil des Verdauungssystems geben Zähne die bestmöglichen Hinweise auf die Ernährungsstrategien (ausgestorbener) Arten und eine Fülle weiterer Informationen. Aufgrund dessen ist es für die wissenschaftliche Arbeit von größter Bedeutung, die Zähne so detailliert und exakt wie möglich in ihrer gesamten Struktur zu erfassen. Bisher wurden zumeist zweidimensionale Parameter verwendet, um die komplexe Kronenmorphologie von Primatenmolaren vergleichend zu untersuchen. Die vorliegende Arbeit hatte das Ziel, Zähne verschiedener Arten von Altweltaffen mittels computerbasierter Methoden dreidimensional zu erfassen und neue Parameter zu definieren, mit denen die Form dieser Zähne objektiv erfasst und funktionell interpretiert werden kann. Mit einem Oberflächen-Scanner wurden die Gebisse einer Stichprobe von insgesamt 48 Primaten von fünf verschiedenen Arten eingescannt und mit Bildverarbeitungsmethoden so bearbeitet, dass dreidimensionale digitale Modelle einzelner Backenzähne zur Analyse vorlagen. Es wurden dabei sowohl Arten ausgewählt, die eine für ihre Gattung typische Ernährungsweise besitzen - also Frugivorie bei den Cercopithecinen und Folivorie bei den Colobinen - als auch solche, die eine davon abweichende Alimentation bevorzugen. Alle Altweltaffen haben sehr ähnliche Molaren. Colobinen haben jedoch höhere und spitzere Zahnhöcker, dünneren Zahnschmelz und scheinen ihre Zähne weniger stark abzukauen als die Meerkatzen. Diese Beobachtungen konnten mit Hilfe der neuen Parameter quantifiziert werden. Aus der 3D-Oberfläche und der Grundfläche der Zähne wurde ein Index gebildet, der die Stärke des Oberflächenreliefs angibt. Dieser Index hat bei Colobinen deutlich höhere Werte als bei Cercopithecinen, auch bei Zähnen, die schon stark abgekaut sind. Die Steilheit der Höcker und ihre Ausrichtung wurden außerdem gemessen. Auch diese Winkelmessungen bestätigten das Bild. Je höher der Blätteranteil an der Ernährung ist, desto höher sind die Indexwerte und umso steiler sind die Höcker. Besonders wichtig war es, dies auch für abgekaute Zähne zu bestätigen, die bisher nicht in funktionelle Analysen miteinbezogen wurden. Die Ausrichtung der Höckerseiten gibt Hinweise auf die Kaubewegung, die zum effizienten Zerkleinern der Nahrung notwendig ist. Die Ausrichtung der Höcker der Colobinen deutet darauf hin, dass diese Primaten flache, gleitende Kaubewegungen machen, bei denen die hohen Höcker aneinander vorbei scheren. Dies ist sinnvoll zum Zerschneiden von faserreicher Nahrung wie Blättern. Cercopithecinen scheinen ihre Backenzähne eher wie Mörser und Stößel zu verwenden, um Früchte und Samen zu zerquetschen und zu zermahlen. Je nachdem, was neben der hauptsächlichen Nahrung noch gekaut wird, unterscheiden sich die Arten graduell. Anders als bisher vermutet wurde, konnte gezeigt werden, dass Colobinen trotz des dünnen Zahnschmelzes ihre Zähne weniger stark abkauen und weniger Dentin freigelegt wird. Dies gibt eindeutige Hinweise auf die Unterschiede in der mechanischen Belastung, die während des Kauvorgangs auf die Zähne wirkt, und lässt sich gut mit der Ernährung der Arten in Zusammenhang bringen. Anhand dieser modellhaften Beobachtungen können in Zukunft ausgestorbene Arten hinsichtlich ihrer Ernährungsweise mit 3D-Techniken untersucht werden.

High-Speed Laser Processing of Thin Single and Multi-Layer Films

Theoretical models are developed for the continuous-wave and pulsed laser incision and cut of thin single and multi-layer films. A one-dimensional steady-state model establishes the theoretical foundations of the problem by combining a power-balance integral with heat flow in the direction of laser motion. In this approach, classical modelling methods for laser processing are extended by introducing multi-layer optical absorption and thermal properties. The calculation domain is consequently divided in correspondence with the progressive removal of individual layers. A second, time-domain numerical model for the short-pulse laser ablation of metals accounts for changes in optical and thermal properties during a single laser pulse. With sufficient fluence, the target surface is heated towards its critical temperature and homogeneous boiling or "phase explosion" takes place. Improvements are seen over previous works with the more accurate calculation of optical absorption and shielding of the incident beam by the ablation products. A third, general time-domain numerical laser processing model combines ablation depth and energy absorption data from the short-pulse model with two-dimensional heat flow in an arbitrary multi-layer structure. Layer removal is the result of both progressive short-pulse ablation and classical vaporisation due to long-term heating of the sample. At low velocity, pulsed laser exposure of multi-layer films comprising aluminium-plastic and aluminium-paper are found to be characterised by short-pulse ablation of the metallic layer and vaporisation or degradation of the others due to thermal conduction from the former. At high velocity, all layers of the two films are ultimately removed by vaporisation or degradation as the average beam power is increased to achieve a complete cut. The transition velocity between the two characteristic removal types is shown to be a function of the pulse repetition rate. An experimental investigation validates the simulation results and provides new laser processing data for some typical packaging materials.