Impact strength and abrasion resistance of high strength concrete with rice husk ash and rubber tires

The paper discusses the application of High Strength Concrete (HSC) technology for concrete production with the incorporation of Rice Husk Ash (RHA) residues by replacing a bulk of the material caking and rubber tires with partial aggregate volume, assessing their influence on the mechanical properties and durability. For concrete with RHA and rubber, it was possible to reduce the brittleness by increasing the energy absorbing capacity. With respect to abrasion, the RHA and rubber concretes showed lower mass loss than the concrete without residues, indicating that this material is attractive to be used in paving. It is thus hoped that these residues may represent a technological and ecological alternative for the production of concrete in construction works.

Avaliação do comportamento reológico na retração plástica e na fissuração de argamassas de concreto auto-adensável

This paper investigated the influence of the amount of superplasticizer and mineral adding - silica fume and basaltic filer - in plastic shrinkage and cracking of self-compacting concrete (SCC) mortars. Initially analysis was performed of the rheological behavior of cement paste and mortars phases of the compositions of SCC. Then the deformations of mortars were measured by the effect of shrinkage and evaluation of cracking. On plastic shrinkage and cracking, the composition with silica fume showed superior results, independent of wind and superplasticizer content, relative to the composition with addition of basalt filler. However, the composition with silica fume showed superior results only in the tests with imposed ventilation at vertical plastic deformation. The rheological behavior affected directly the plastic shrinkage and cracking at early ages, fact confirmed by the analysis of capillary pressures of mortars tested.

Estrutura das comunidades de macroalgas da bacia de drenagem do rio Cascavel, Estado do Paraná, Brasil

The drainage basin of Cascavel River is almost entirely within the urban perimeter of Guarapuava, Paraná State, Brazil. Seven stream segments were sampled in two seasons (summer and winter). We found 12 taxa of macroalgae with a dominance of Chlorophyta (seven taxa) followed by Cyanophyta (three taxa), Heterokontophyta and Rhodophyta (one taxon each). Richness, diversity, and evenness were higher during the winter while the abundance and dominance were higher in the summer. Among the microenvironmental characteristics, the current velocity was the only one that differed significantly between the periods. The regression analysis revealed that the richness of the substrate was responsible for the variation in richness, diversity, evenness, and dominance during the summer period. During the winter the current velocity was responsible for the variation of species diversity. A cluster analysis of macroalgal communities did not group points in the same temporal period. The Canonical Correspondence Analysis (CCA) showed that the segments were close to each other because of the occurrence of one or a few species in common. The patterns of spatial and temporal distribution of stream macroalgae seem to be strongly influenced by microhabitat characteristics at different scales.However, they aresupported by regional variables.

Análise da durabilidade do concreto de alto desempenho com adição de cinza de casca de arroz e borracha de pneu

Since the Seventies, there has been a growing degradation of concrete structures in Brazil. For that reason, much research has been made on the durability of those structures, aiming at contributing towards quality improvement and reduction of maintenance and repair costs. This study evaluates the behavior of the durability of high-performance concrete with additions, replacing part of the cement and aggregates with rice husk ash and tire rubber, respectively. Durability tests were carried out in which concrete was subjected to several degradation processes, such as the action of water, temperature, salts and acid solution. The results indicated that the addition of active silica or rice husk ash, both with tire rubber did not worsen the durability of concrete. In fact, rubber proved to be very effective in preventing the action of chemical agents, high temperatures and the penetration of water. Rice husk ash, despite the larger diameter of particles, had similar results to that of the active silica.

Qualidade espermática após seleção por centrifugação em Ovipure® ou gradiente de Percoll® do sêmen ovino criopreservado

Pós-graduação em Biotecnologia Animal - FMVZ

Longitudinal patterns of fish assemblages in mountain streams from tropical forest biome

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da partícula e do momento de jateamento na caracterização superficial da zircônia e na resistência de união com cimento resinoso

Pós-graduação em Reabilitação Oral - FOAR

Estudo da passagem de diferentes concentrações de ácido fosfórico através da dentina e observação da morfologia dentinária pelo microscópio eletrônico de varredura

Pós-graduação em Odontologia Restauradora - ICT

Avaliação da resistência adesiva entre a superfície de uma cerâmica aluminizada e um cimento resinoso

Pós-graduação em Odontologia Restauradora - ICT

Avaliação da resistência adesiva entre um cimento resinoso e ligas para metalo-cerâmica submetidas a dois diferentes condicionamentos de supefície

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cultura organizacional: uma análise da microempresa familiar informal

Analyze possible relationships between the bankruptcy and the family structure of informal micro-enterprises in Fortaleza city, Brazil. The analysis began with a research among micro-entrepreneurs who were beneficiaries of PROFITEC loans in bankruptcy and non-bankruptcy situation in 1997-1999 period. Evaluate whether the overlap of family and professional relationship inside the organizational structure of those micro-enterprises is a factor leading to bankruptcy. The comparative analysis divides the micro-enterprises into two groups: one that which had complied with the loan obligations (abiding firms) and another which had not (non-abiding firms). The analysis pointed out the familiar structure as having positive and negative influences over organizational work in both groups. The research also realized that those groups of family informal micro-enterprises do not recognize the professional problems related to the family, giving room for managerial conflicts related to the compliance, work time and use of profit. We cannot say that family structure of the informal microenterprises is the decisive cause for non-abidance, since there are also family firms which have the same disadvantages of both groups, but are complying with their obligations. The personal relationships in the informal family firms, however, define good practices and behaviors that definitely affect their operations.

Caracterização de superfície, adesiva e mecânica de uma zircônia parcialmente estabilizada por ítria em função da partícula ou do momento do jateamento

Pós-graduação em Reabilitação Oral - FOAR

Avaliação experimental de eficiência térmica de um recuperador de calor e caldeira em um sistema de cogeração

Pós-graduação em Engenharia Mecânica - FEB

Estudo químico e atividade mutagênica e antirradicalar de caesalpinia ferrea

Pós-graduação em Química - IQ

Estudo do processo SOL-GEL para a obtenção de xerogéis e aerogéis monolíticos

O presente trabalho descreve uma pequena parte da história do Processo Sol-Gel e sua implantação em nosso Departamento. É dedicado ao estudo do processo para a preparação de Xerogéis e Aerogéis monolíticos de Sílica, puros e dopados. O processo compreende a hidrólise ácida do Tetraethoxisilano estimulada por ultra-som e subseqüente policondensação, envelhecimento e secagem em condições normais (Xerogéis) e via extração hipercrítica do CO2, (Aerogéis). Também descreve de maneira sucinta, a química do processo Sol-Gel dos alcooxisilanos e os possíveis produtos, sua nomenclatura, algumas vantagens e desvantagens. Apresenta um método original que permite identificar os parâmetros que influenciam as reações de hidrólise dos alcooxisilanos e determinar as melhores condições experimentais para a obtenção de amostras monolíticas. Descreve também a técnica de preparação de aerogéis via extração hipercrítica do CO2 e caracterizações óticas e térmicas de várias amostras obtidas em nosso laboratório. O processo Sol-Gel, não é um método adequado para a produção de grandes quantidades de produtos de uso comum. Também não substitui os processos industriais convencionais, mas torna-se particularmente interessante para a preparação de materiais vítreos impossíveis de serem preparados por técnicas convencionais de fusão, como é o caso das matrizes de SiO2 dopadas com polímeros e corantes orgânicos.