Measuring population mobility speed from space

Ad-hoc population dynamics in Krugman’s type core and periphery models adjust population share of a region, based on its real wage rate deviation from national average, at pre-specified speed of population mobility. Whereas speed of population mobility is expected to be different across countries, for geographical, cultural, technological, etc. reasons, one common speed is often applied in theoretical and simulation analysis, due to spatially patchy, and temporally infrequent, availability of sub-national regional data. This article demonstrates how, increasingly available, high definition spatio-temporal remote-sensing data, and their by-products, can be used to measure speed of population mobility in national and sub-national level.

Price Formation and Real Estate Characteristics Residential Real Estate, Lisbon - Portugal

Análisis del proceso de formación de precios en el mercado residencial de Lisboa desde el punto de vista de la eliminación de los aspectos subjetivos de la apreciación por el tasador de las características de los inmuebles

Adaptive fuzzy knowledge-based systems for control metabots' mobility on virtual environments

The confluence of three-dimensional (3D) virtual worlds with social networks imposes on software agents, in addition to conversational functions, the same behaviours as those common to human-driven avatars. In this paper, we explore the possibilities of the use of metabots (metaverse robots) with motion capabilities in complex virtual 3D worlds and we put forward a learning model based on the techniques used in evolutionary computation for optimizing the fuzzy controllers which will subsequently be used by metabots for moving around a virtual environment.

Absorption and mobility of foliar-applied boron in soybean as affected by plant boron status and application as a polyol complex

In the present study (i) the impact of plant Boron (B) status on foliar B absorption and (ii) the effect of B complexation with polyols (sorbitol or mannitol) on B absorption and translocation was investigated. Soybean (Glycine max (L.) Meer.) plants grown in nutrient solution containing 0 μM, 10 μM, 30 μM or 100 μM 11B labelled boric acid (BA) were treated with 50 mM 10B labelled BA applied to the basal parts of two leaflets of one leaf, either pure or in combination with 500 mM sorbitol or mannitol. After one week, 10B concentrations in different plant parts were determined. In B deficient leaves (0 μM 11B), 10B absorption was significantly lower than in all other treatments (9.7% of the applied dose vs. 26%–32%). The application of BA in combination with polyols increased absorption by 18–25% as compared to pure BA. The absolute amount of applied 10B moving out of the application zone was lowest in plants with 0 μM 11B supply (1.1% of the applied dose) and highest in those grown in 100 μM 11B (2.8%). The presence of sorbitol significantly decreased the share of mobile 10B in relation to the amount absorbed. The results suggest that 11B deficiency reduces the permeability of the leaf surface for BA. The addition of polyols may increase 10B absorption, but did not improve 10B distribution within the plant, which was even hindered when applied a sorbitol complex.

Review of the Performance of Residential PV systems in Belgium

The main objective of this paper is to review the state of the art of residential PV systems in Belgium by the analysis of the operational data of 993 installations. For that, three main questions are posed: how much energy do they produce? What level of performance is associated to their production? Which are the key parameters that most influence their quality? This work brings answers to these questions. A middling commercial PV system, optimally oriented, produces a mean annual energy of 892 kWh/kWp. As a whole, the orientation of PV generators causes energy productions to be some 6% inferior to optimally oriented PV systems. The mean performance ratio is 78% and the mean performance index is 85%. That is to say, the energy produced by a typical PV system in Belgium is 15% inferior to the energy produced by a very high quality PV system. Finally, on average, the real power of the PV modules falls 5% below its corresponding nominal power announced on the manufacturer's datasheet. Differences between real and nominal power of up to 16% have been detected.

Review of the Performance of Residential PV systems in France

The main objective of this paper is to review the state of the art of residential PV systems in France. This is done analyzing the operational data of 6868 installations. Three main questions are posed. How much energy do they produce? What level of performance is associated to their production? Which are the key parameters that most influence their quality? During the year 2010, the PV systems in France have produced a mean annual energy of 1163 kWh/kWp. As a whole, the orientation of PV generators causes energy productions to be some 7% inferior to optimally oriented PV systems. The mean Performance Ratio is 76% and the mean Performance Index is 85%. That is to say, the energy produced by a typical PV system in France is 15% inferior to the energy produced by a very high quality PV system. On average, the real power of the PV modules falls 4.9% below its corresponding nominal power announced on the manufacturer's datasheet. A brief analysis by PV modules technology has led to relevant observations about two technologies in particular. On the one hand, the PV systems equipped with heterojunction with intrinsic thin layer (HIT) modules show performances higher than average. On the other hand, the systems equipped with the copper indium (di)selenide (CIS) modules show a real power that is 16% lower than their nominal value.

Next Generation of Energy Residential Gateways for Demand Response and Dynamic Pricing

Predictions about electric energy needs, based on current electric energy models, forecast that the global energy consumption on Earth for 2050 will double present rates. Using distributed procedures for control and integration, the expected needs can be halved. Therefore implementation of Smart Grids is necessary. Interaction between final consumers and utilities is a key factor of future Smart Grids. This interaction is aimed to reach efficient and responsible energy consumption. Energy Residential Gateways (ERG) are new in-building devices that will govern the communication between user and utility and will control electric loads. Utilities will offer new services empowering residential customers to lower their electric bill. Some of these services are Smart Metering, Demand Response and Dynamic Pricing. This paper presents a practical development of an ERG for residential buildings.

Temperature and time dependent threshold voltage characterization of AlGaN/GaN high electron mobility transistors

Relacionado con línea de investigación del GDS del ISOM ver http://www.isom.upm.es/dsemiconductores.php

Performance Analysis of 10,000 Residential PV Systems in France and Belgium

The main objective of this paper is to review the state of the art of residential PV systems in France and Belgium. This is done analyzing the operational data of 10650 PV systems (9657 located in France and 993 in Belgium). Three main questions are posed. How much energy do they produce? What level of performance is associated to their production? Which are the key parameters that most influence their quality? During the year 2010, the PV systems in France have produced a mean annual energy of 1163 kWh/kWp in France and 852 kWh/kWp in Belgium. As a whole, the orientation of PV generators causes energy productions to be some 7% inferior to optimally oriented PV systems. The mean Performance Ratio is 76% in France and 78% in Belgium, and the mean Performance Index is 85% in both countries. On average, the real power of the PV modules falls 4.9% below its corresponding nominal power announced on the manufacturer?s datasheet. A brief analysis by PV modules technology has lead to relevant observations about two technologies in particular. On the one hand, the PV systems equipped with Heterojunction with Intrinsic. Thin layer (HIT) modules show performances higher than average. On the other hand, the systems equipped with Copper Indium (di)Selenide (CIS) modules show a real power that is 16 % lower than their nominal value.

The Economic Value of Residential Land in Historical Areas: An Application of the Residual Method to the Secondary Market

Land value bears significant weight in house prices in historical town centers. An essential aim for regulating the mortgage market, particularly in the financial and property crisis that countries such as Spain are undergoing, is to have at hand objective procedures for its valuation, whatever the conditions (location, construction, planning). Of all the factors contributing to house price make-up, the land is the only one whose value does not depend on acquisition cost, but rather on the location-time binomial. That is to say, the specific circumstances at that point and at the exact moment of valuation. For this reason, the most commonly applied procedure for land valuation in town centers is the use of the residual method: once the selling price of new housing in a district is known, the other necessary costs and expenses of development are deducted, including those of building and the developer’s profit. The value left is that of the land. To apply these procedures it is vital to have figures such as building costs, technical fees, tax costs, etc. But, above all, it is essential to obtain the selling price of the new housing. This is not always feasible, on account of the lack of newbuild development in this location. This shortage of information occurs in historical town cities, where urban renewal is slight due to the heritage-protection policies, and where, nevertheless there is substantial activity in the secondary market. In these circumstances, as an alternative for land valuation in consolidated urban areas, we have the adaptation of the residual method to the particular characteristics of the secondary market. To these ends, there is the proposal for the appreciation of the dwelling which follows, in a backwards direction, the application of traditional depreciation methods proposed by the various valuation manuals and guidelines. The reliability of the results obtained is analyzed by contrasting it with published figures for newly-built properties, according to different rules applied in administrative appraisals in Spain and the incidence of an eventual correction due to conservation state.

Environmental analysis of residential building facades through energy consumption, GHG emissions and costs

This paper provides some results on the potential to minimize environmental impacts in residential buildings life cycle, through façade design strategies, analyzing also their impact on costs from a lifecycle perspective. On one hand, it assesses the environmental damage produced by the materials of the building envelope, and on the other, the benefits they offer in terms of habitability and liveability in the use phase. The analysis includes several design parameters used both for rehabilitation of existing facades, as for new facades, trying to cover various determinants and proposing project alternatives. With this study we intended to contribute to address the energy challenges for the coming years, trying also to propose pathways for innovative solutions for the building envelope.

PV self-consumption optimization with storage and Active DSM for the residential sector

With the rising prices of the retail electricity and the decreasing cost of the PV technology, grid parity with commercial electricity will soon become a reality in Europe. This fact, together with less attractive PV feed-in-tariffs in the near future and incentives to promote self-consumption suggest, that new operation modes for the PV Distributed Generation should be explored; differently from the traditional approach which is only based on maximizing the exported electricity to the grid. The smart metering is experiencing a growth in Europe and the United States but the possibilities of its use are still uncertain, in our system we propose their use to manage the storage and to allow the user to know their electrical power and energy balances. The ADSM has many benefits studied previously but also it has important challenges, in this paper we can observe and ADSM implementation example where we propose a solution to these challenges. In this paper we study the effects of the Active Demand-Side Management (ADSM) and storage systems in the amount of consumed local electrical energy. It has been developed on a prototype of a self-sufficient solar house called “MagicBox” equipped with grid connection, PV generation, lead–acid batteries, controllable appliances and smart metering. We carried out simulations for long-time experiments (yearly studies) and real measures for short and mid-time experiments (daily and weekly studies). Results show the relationship between the electricity flows and the storage capacity, which is not linear and becomes an important design criterion.

Empowering and assisting natural human mobility: The simbiosis walker

This paper presents the complete development of the Simbiosis Smart Walker. The device is equipped with a set of sensor subsystems to acquire user-machine interaction forces and the temporal evolution of user's feet during gait. The authors present an adaptive filtering technique used for the identification and separation of different components found on the human-machine interaction forces. This technique allowed isolating the components related with the navigational commands and developing a Fuzzy logic controller to guide the device. The Smart Walker was clinically validated at the Spinal Cord Injury Hospital of Toledo - Spain, presenting great acceptability by spinal chord injury patients and clinical staff

Optimization of urban mobility measures to achieve win-win strategies

European cities are essential in the development of Europe as they constitute the living environment of more than 60% of the population in the European Union and are drivers of the European economy – just under 85% of the EU’s gross domestic product is produced in urban areas (EC, 2007a). The car has been one of the main factors of development during the 20th century, but it is at the same time the origin of the key problems cities have to face: traffic increase. This has resulted in chronic congestion with many adverse consequences such as air pollution and noise. This loss of environmental quality is one of the reasons for urban sprawl in European cities during recent decades. But this urban sprawl at the same time worsens the environmental conditions. We must return to the dense city, but clean and competitive, and this implies reducing car use yet provides quality transport alternatives sufficient to recover and maintain the competitiveness of cities (EC, 2007a). Consequently, European cities need to establish an urban transport strategy which helps reduce their environmental problems –mainly emissions and noise – but without decreasing their trip attraction. This aspect is very important because a loss of trip attraction would result in an increase of people moving to more disperse areas, contributing towards worsening the current situation. This thesis is an attempt to contribute solutions to this problem in two ways: 1) The first is to analyze the complementarity and possible synergies of several urban transport measures aimed at improving a modal split to a more sustainable means of transport. This analysis will focus on the three aspects already mentioned: emissions, noise and attractiveness or competitiveness. 2) Once possible synergies and complementarities have been analyzed, the second objective is to propose the best combination of these measures, in terms of level of implementation, to achieve the maximum benefit with respect to the three aspects previously established: emissions, noise and attractiveness or competitiveness. Therefore, within the wide range of measures enhancing sustainable urban transport, three of them have been be selected in this thesis to establish a methodology for achieving these objectives. The analysis will be based on the region of Madrid, which is also the case study selected for this research. Las ciudades europeas son piezas fundamentales para el desarrollo europeo, ya que son el lugar de residencia de más del 60% de la población de la unión europea así como los motores de su economía – casi el 85% del PIB europeo se produce en áreas urbanas (EC, 2007a). El coche ha sido uno de los principales motores de desarrollo de las ciudades durante el siglo XX, pero se ha terminado por convertir a su vez en uno de los principales problemas con los que tiene que lidiar las ciudades: el aumento del tráfico. Esto ha derivado en unos niveles crónicos de congestión, con multitud de efectos adversos, entre los que cabe destacar la contaminación del aire y el ruido. Esta pérdida de calidad ambiental es una de las razones que ha propiciado la dispersión urbana que han experimentado las ciudades europeas en las últimas décadas. Pero esta dispersión urbana a su vez contribuye a empeorar las condiciones ambientales de las ciudades. Debemos retornar a la ciudad densa, pero limpia y competitiva, y esto implica reducir el uso del coche, pero proporcionando alternativas de transporte que permitan recuperar y mantener la competitividad de las ciudades (EC, 2007a). Por lo tanto, las ciudades europeas necesitan encontrar una estrategia de transporte urbano que ayude a reducir sus problemas medio ambientales – principalmente ruido y emisiones – pero sin hacerlas perder atractividad o competitividad. Este aspecto tiene gran importancia porque una pérdida de la misma se traduciría en un aumento de dispersión de la población hacia áreas periféricas, contribuyendo a empeorar la situación actual. Esta tesis contribuye a solucionar este problema de dos maneras: 1) La primera, analizando la complementariedad y posibles sinergias de diferentes medidas de transporte urbano orientadas a promover un reparto modal hacia modos más sostenibles. Este análisis se centrará en los tres aspectos anteriormente citados: emisiones, ruido y atractividad o competitividad. 2) Una vez las posibles sinergias y complementariedades se han analizado, el segundo objetivo es proponer la mejor combinación de estas medidas – en términos de grado de aplicación - para lograr el máximo beneficio en lo que respecta a los tres objetivos previamente establecidos. Para ello, en esta tesis se han seleccionado una serie de medidas que permitan establecer una metodología para alcanzar estos objetivos previamente definidos. El análisis se centra en la ciudad de Madrid y su área metropolitana, la cual se ha escogido como caso de estudio para realizar esta investigación.

Implicaciones de la accesibilidad configuracional en la movilidad peatonal. El caso de Madrid = The implications of configurational accessibility in pedestrian mobility. The case of Madrid

- Resumen La hipótesis que anima esta tesis doctoral es que algunas de las características del entorno urbano, en particular las que describen la accesibilidad de su red de espacio público, podrían estar relacionadas con la proporción de viajes a pie o reparto modal, que tiene cada zona o barrio de Madrid. Uno de los puntos de partida de dicha hipótesis que el entorno urbano tiene una mayor influencia sobre los viaje a pie que en sobre otros modos de transporte, por ejemplo que en los viajes de bicicleta o en transporte público; y es que parece razonable suponer que estos últimos van a estar más condicionadas por ejemplo por la disponibilidad de vías ciclistas, en el primer caso, o por la existencia de un servicio fiable y de calidad, en el segundo. Otra de las motivaciones del trabajo es que la investigación en este campo de la accesibilidad del espacio público, en concreto la denominada “Space Syntax”, ha probado en repetidas ocasiones la influencia de la red de espacio público en cómo se distribuye la intensidad del tráfico peatonal por la trama urbana, pero no se han encontrado referencias de la influencia de dicho elemento sobre el reparto modal. De acuerdo con la hipótesis y con otros trabajos anteriores se propone una metodología basada en el análisis empírico y cuantitativo. Su objetivo es comprobar si la red de espacio público, independientemente de otras variables como los usos del suelo, incluso de las variables de ajenas entorno no construido, como las socioeconómicas, está o no relacionada estadísticamente con la proporción de peatones viajes en las zonas urbanas. Las técnicas estadísticas se utilizan para comprobar sistemáticamente la asociación de las variables del entorno urbano, denominadas variables independientes, con el porcentaje de viajes a pie, la variable dependiente. En términos generales, la metodología es similar a la usada en otros trabajos en este campo como los de CERVERÓ y KOCKLEMAN (1997), CERVERÓ y DUNCAN (2003), o para los que se utilizan principalmente en la revisión general de TRB (2005) o, más recientemente, en ZEGRAS (2006) o CHATMAN (2009). Otras opciones metodológicas, como los métodos de preferencias declaradas (ver LOUVIERE, HENSHER y SWAIT, 2000) o el análisis basado en agentes (PENN & TURNER, 2004) fueron descartados, debido a una serie de razones, demasiado extensas para ser descritas aquí. El caso de estudio utilizado es la zona metropolitana de Madrid, abarcándola hasta la M-50, es decir en su mayor parte, con un tamaño aproximado de 31x34 Km y una población de 4.132.820 habitantes (aproximadamente el 80% de la población de la región). Las principales fuentes de datos son la Encuesta Domiciliaria de Movilidad de 2004 (EDM04), del Consorcio Regional de Transportes de Madrid que es la última disponible (muestra: > 35.000 familias,> 95.000 personas), y un modelo espacial del área metropolitana, integrando el modelo para calcular los índices de Space Syntax y un Sistema de Información Geográfica (SIG). La unidad de análisis, en este caso las unidades espaciales, son las zonas de transporte (con una población media de 7.063 personas) y los barrios (con una población media de 26.466 personas). Las variables del entorno urbano son claramente el centro del estudio. Un total de 20 índices (de 21) se seleccionan de entre los más relevantes encontrados en la revisión de la producción científica en este campo siendo que, al mismo tiempo, fueran accesibles. Nueve de ellos se utilizan para describir las características de los usos del suelo, mientras que otros once se usan para describir la red de espacios públicos. Estos últimos incluyen las variables de accesibilidad configuracional, que son, como se desprende de su título, el centro del estudio propuesto. La accesibilidad configuracional es un tipo especial de accesibilidad que se basa en la configuración de la trama urbana, según esta fue definida por HILLIER (1996), el autor de referencia dentro de esta línea de investigación de Space Syntax. Además se incluyen otras variables de la red de espacio público más habituales en los estudios de movilidad, y que aquí se denominan características geométricas de los elementos de la red, tales como su longitud, tipo de intersección, conectividad, etc. Por último se incluye además una variable socioeconómica, es decir ajena al entorno urbano, para evaluar la influencia de los factores externos, pues son varios los que pueden tener un impacto en la decisión de caminar (edad, género, nivel de estudios, ingresos, tasa de motorización, etc.). La asociación entre las variables se han establecido usando análisis de correlación (bivariante) y modelos de análisis multivariante. Las primeras se calculan entre por pares entre cada una de las 21 variables independientes y la dependiente, el porcentaje de viajes a pie. En cuanto a los segundos, se han realizado tres tipos de estudios: modelo multivariante general lineal, modelo multivariante general curvilíneo y análisis discriminante. Todos ellos son capaces de generar modelos de asociación entre diversas variables, pudiéndose de esta manera evaluar con bastante precisión en qué medida cada modelo reproduce el comportamiento de la variable dependiente, y además, el peso o influencia de cada variable en el modelo respecto a las otras. Los resultados fundamentales del estudio se expresan en dos modelos finales alternativos, que demuestran tener una significativa asociación con el porcentaje de viajes a pie (R2 = 0,6789, p <0,0001), al explicar las dos terceras partes de su variabilidad. En ellos, y en general en todo el estudio realizado, se da una influencia constante de tres índices en particular, que quedan como los principales. Dos de ellos, de acuerdo con muchos de los estudios previos, corresponden a la densidad y la mezcla de usos del suelo. Pero lo más novedoso de los resultados obtenidos es que el tercero es una medida de la accesibilidad de la red de espacio público, algo de lo que no había referencias hasta ahora. Pero, ¿cuál es la definición precisa y el peso relativo de cada uno en el modelo, es decir, en la variable independiente? El de mayor peso en la mayor parte de los análisis realizados es el índice de densidad total (n º residentes + n º puestos de trabajo + n º alumnos / Ha). Es decir, una densidad no sólo de población, sino que incluye algunas de las actividades más importantes que pueden darse una zona para generar movilidad a pie. El segundo que mayor peso adquiere, llegando a ser el primero en alguno de los análisis estadísticos efecturados, es el índice de accesibuilidad configuracional denominado integración de radio 5. Se trata de una medida de la accesibilidad de la zona, de su centralidad, a la escala de, más un menor, un distrito o comarca. En cuanto al tercero, obtiene una importancia bastante menor que los anteriores, y es que representa la mezcla de usos. En concreto es una medida del equilibrio entre los comercios especializados de venta al por menor y el número de residentes (n º de tiendas especializadas en alimentación, bebidas y tabaco / n º de habitantes). Por lo tanto, estos resultados confirman buena parte de los de estudios anteriores, especialmente los relativas a los usos del suelo, pero al mismo tiempo, apuntan a que la red de espacio público podría tener una influir mayor de la comprobada hasta ahora en la proporción de peatones sobre el resto de modos de transportes. Las razones de por qué esto puede ser así, se discuten ampliamente en las conclusiones. Finalmente se puede precisar que dicha conclusión principal se refiere a viajes de una sola etapa (no multimodales) que se dan en los barrios y zonas del área metropolitana de Madrid. Por supuesto, esta conclusión tiene en la actualidad, una validez limitada, ya que es el resultado de un solo caso — Abstract The research hypothesis for this Ph.D. Thesis is that some characteristics of the built environment, particularly those describing the accessibility of the public space network, could be associated with the proportion of pedestrians in all trips (modal split), found in the different parts of a city. The underlying idea is that walking trips are more sensitive to built environment than those by other transport modes, such as for example those by bicycle or by public transport, which could be more conditioned by, e.g. infrastructure availability or service frequency and quality. On the other hand, it has to be noted that the previously research on this field, in particular within Space Syntax’s where this study can be referred, have tested similar hypothesis using pedestrian volumes as the dependent variable, but never against modal split. According to such hypothesis, research methodology is based primarily on empirical quantitative analysis, and it is meant to be able to assess whether public space network, no matter other built environment and non-built environment variables, could have a relationship with the proportion of pedestrian trips in urban areas. Statistical techniques are used to check the association of independent variables with the percentage of walking in all trips, the dependent one. Broadly speaking this methodology is similar to that of previous studies in the field such as CERVERO&KOCKLEMAN (1997), CERVERO & DUNCAN (2003), or to those used mainly in the general review of T.R.B. (2005) or, more recently in ZEGRAS (2006) or CHATMAN (2009). Other methodological options such as stated choice methods (see LOUVIERE, HENSHER & SWAIT, 2000) or agent based analysis (PENN & TURNER, 2004), were discarded, due to a number of reasons, too long to be described here. The case study is not the entire Madrid’s metropolitan area, but almost (4.132.820 inhabitants, about 80% of region´s population). Main data sources are the Regional Mobility Home Based Survey 2004 (EDM04), which is the last available (sample: >35.000 families, > 95.000 individuals), and a spatial model of the metropolitan area, developed using Space Syntax and G.I.S. techniques. The analysis unit, in this case spatial units, are both transport zones (mean population = 7.063) and neighborhoods (mean population = 26.466). The variables of the built environment are clearly the core of the study. A total of 20 (out of 21) are selected from among those found in the literature while, at the same time, being accessible. Nine out of them are used to describe land use characteristics while another eleven describe the network of public spaces. Latter ones include configurational accessibility or Space Syntax variables. This is a particular sort of accessibility related with the concept of configuration, by HILLIER (1996), one of the main authors of Space Syntax, But it also include more customary variables used in mobility research to describe the urban design or spatial structure (here public space network), which here are called geometric characteristics of the such as its length, type of intersection, conectivity, density, etc. Finally a single socioeconomic variable was included in order to assess the influence non built environment factors that also may have an impact on walking (age, income, motorization rate, etc.). The association among variables is worked out using bi-variate correlation analysis and multivariate-analysis. Correlations are calculated among the 21 independent variables and the dependent one, the percentage of walking trips. Then, three types of multi-variate studies are run: general linear, curvilinear and discriminant multi-variate analysis. The latter are fully capable of generating complex association models among several variables, assessing quite precisely to what extent each model reproduces the behavior of the dependent variable, and also the weight or influence of each variable in the model. This study’s results show a consistent influence of three particular indexes in the two final alternative models of the multi-variate study (best, R2=0,6789, p<0,0000). Not surprisingly, two of them correspond to density and mix of land uses. But perhaps more interesting is that the third one is a measure of the accessibility of the public space network, a variable less important in the literature up to now. Additional precisions about them and their relative weight could also be of some interest. The density index is not only about population but includes most important activities in an area (nº residents + nº jobs+ nº students/Ha). The configurational index (radius 5 integration) is a measure of the accessibility of the area, i.e. centrality, at the scale of, more a less, a district. Regarding the mix of land uses index, this one is a measure of the balance between retail, in fact local basic retail, and the number of residents (nº of convenience shops / nº of residents). Referring to their weights, configurational index (radius 5 integration) gets the higher standardized coefficient of the final equation. However, in the final equations, there are a higher number of indexes coming from the density or land use mix categories than from public space network enter. Therefore, these findings seem to support part of the field’s knowledge, especially those concerning land uses, but at the same time they seem to bring in the idea that the configuration of the urban grid could have an influence in the proportion of walkers (as a part of total trips on any transport mode) that do single journey trips in the neighborhoods of Madrid, Spain. Of course this conclusion has, at present, a limited validity since it’s the result of a single case. The reasons of why this can be so, are discussed in the last part of the thesis.