(1)H NMR Fingerprinting of Brazilian Commercial Gasoline: Pattern-Recognition Analyses for Origin Authentication Purposes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Yield of four Agaricus bisporus strains in three compost formulations and chemical composition analyses of the mushrooms

Três formulações de composto, à base de palhas de Cynodom dactylon (L.) Pers. (cultivares Coast-cross e Tyfton) e Aveia-Avena sativa, foram testadas no cultivo das linhagens ABI-01/01, ABI-04/02, ABI-05/03 e ABI-06/04 de A. bisporus. O delineamento experimental foi em esquema fatorial, inteiramente casualizado com 12 tratamentos (4 linhagens de A. bisporus x 3 tipos de composto) e 8 repetições. Cada unidade experimental constou de uma caixa com 1212,5 kg de composto fresco úmido. Os dados foram submetidos à análise de variância e as médias foram comparadas pelo teste de Tukey. de acordo com os resultados obtidos verificou-se que a produção de cogumelos foi influenciada pela linhagem e/ou pelo tipo de composto. Também verificou-se que o teor de proteína bruta, cinzas e fibra bruta de basidiomas variou com a linhagem de A. bisporus e com o tipo de palha utilizada na formulação do composto.

Cytogenetic analyses of two Curimatidae species (Pisces; Characiformes) from the Paranapanema and Tietê Rivers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of high and low molecular weight glutenin subunits, and subunits of gliadin on physicochemical parameters of different wheat genotypes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Analyses of fatigue data in 4340 high strength steel after cadmium electroplating

Bending fatigue tests were carried out to clarify the effects of heat treatment parameters: temperature and time after cadmium electroplating on a high strength steel, to avoid hydrogen embrittlement. Temperatures heat of 190 degrees C, 230 degrees C, 250 degrees C and 300 degrees C at 3, 8 and 24 hours together with the base material electroplated, with and without heat treatment, resulted in 14 conditions studied with respect to fatigue behaviour. Statistical data analysis was performed to identify the best combination temperature/time regarding fatigue strength of the ABNT 4340 steel and the results obtained revealed that the fatigue strength depend on temperature/time conditions.

Physicochemical properties of sildenafil citrate (Viagra) and sildenafil base

Sildenafil citrate (Viagra) [I] and sildenafil base [II] are easily and unequivocally characterized by a set of physicochemical methods that include X-ray diffractometry, infrared spectroscopy, and thermal analysis. Monoclinic lattice constants: [I]: a = 26.98 Angstrom; b = 11.95 Angstrom; c = 16.68 Angstrom; beta = 106.97degrees. [II]: a = 8.66 Angstrom; b = 34.27 Angstrom; c = 8.93 Angstrom; beta = 96.63'. Both compounds decompose at 189.4degreesC [I] and 251.9degreesC [II]. Densities and refractive indices are given. (C) 2003 Wiley-Liss, Inc.

Microbiological analyses of poultry litter used for ruminant feeding

The aims of this study were to estimate the changes in total bacterial counts (TBC) in poultry litter samples, consisting of rice hulls, after storage, and to identify pathogenic bacteria. For the countings Plate Count agar (Difco) was used. Enrichment and selective media such as blood agar, MacConkey, Baird Parker, brain and heart agar, and egg yolk solid media, and cooked meat and brain and heart infusion, incubated under aerobic or anaerobic conditions were used to isolate Staphylococcus aureus, Salmonella sp, Clostridium perfringens, C. botulinum, C. chauvoei, Campylobacter sp, Escherichia coli, and Corynebacterium sp. Litter samples were collected from the houses of the Veterinary School experimental aviary. A fully randomized experimental design was used with four treatments and four replications, for a total of 16 samples. A decrease in TBC was detected when treatment T1 (zero days of storage) was compared with treatments T2 (14 days of storage). on the other hand the treatments T3 (28 days of storage) and T4 (42 days of storage) presented significantly superior counting in relation to treatment T1. Some pathogenic bacteria of Enterobacteriaceae such as Escherichia coil, Proteus, Arizona, Providencia, Edwardsiella, as well as Staphylococcus aureus, S. epidermidis, different species of genus Clostridium as C. perfringens, C. sordelli, C. chauvoei, C. tetani and C. novyi as well as some strains of Corynebacterium pyogenes were isolated.

A natural triploid in Trichomycterus davisi (Siluriformes, Trichomycteridae): mitotic and meiotic characterization by chromosome banding and synaptonemal complex analyses

Within a total of 50 analyzed specimens a male individual of Trichomycterus davisi has been recorded with 81 chromosomes including 60 metacentric, 18 submetacentric and three subtelocentric chromosomes. When compared with diploid individuals (2n = 54) and the morphological standard of chromosomes, this male is a triploid with 3 = 81 chromosomes. Since staining with silver nitrate indicates three active nucleolar organizer regions (NORs), the three NOR- bearing chromosomes in this individual are genetically active. Analysis of the synaptonemal complex (SC) by electronic microscopy shows that there is an incomplete pairing of the third set of chromosomes in the triploid individual.

Physicochemical properties and morphology of spongolite from Mato Grosso do Sul (Brazil)

The physicochemical properties and morphology of spongolite, a fibrous hollow material from Mato Grosso do Sul State (Brazil) have been studied. The results of thermal analysis, scanning electron microscopy (SEM), X-ray diffraction and NMR spectroscopy indicated that external and internal surfaces of silica spicules are covered by silica gel layers. The water evolved in the range 120-350degreesC is the result of silanol groups condensation to siloxane bonds. Total homogenization of the needles is achieved by heating spongolite over 900degreesC. This mineral may be considered as a natural composite material containing surface-immobilized reactive species. The presence of active silica gel layers opens the possibilities of attaching functional groups to spongolite surface. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Partial characterization of the polluting load of swine wastewater treated with an integrated biodigestion system

The stabilization of swine wastewaters from swine confined housing by the combination of a upflow anaerobic sludge blanket (UASB) reactor and waste stabilization ponds is a viable alternative to minimize the environmental impact caused by inadequate disposal of swine wastewaters. In the present study, the polluting load of pre-decanted swine wastewater treated with a series of two 0.705 m(3) UASB reactors and then in parallel in aerated and non-aerated stabilization tanks was investigated from January to July, 2000. Physicochemical and microbiological analyses were made adopting standard methods (Standard Methods for Examination of Water and Wastewater, 19th ed., American Public Health Association, Washington, DC, 1995). COD values decreased as the wastewater ran through the integrated biodigestion system dropping from about 3492 +/- 511-4094 mg l(-1) +/- 481 to 124 +/- 52-490 mg l(-1) +/- 230, while nitrate and nitrite levels increased in stabilization tanks, ranging respectively from 4 +/- 0 to 20 mg l(-1) +/- 3 and 3 +/- 1 to 11 mg l(-1) +/- 24. Although the removal of Escherichia coli was more than 97% +/- 6, the effluents of the treatment system still contained unacceptable levels of E. coli (1.6 x 10(3)-1.2 x 10(6) 100 ml(-1)) according to WHO guidelines for use of wastewater in agriculture and aquaculture. These results indicate the necessity of changes on operational characteristics of the treatment system such as an increase of the hydraulic retention time in UASB reactors or in stabilization tanks. (C) 2003 Published by Elsevier Ltd.

Use of comet assay to assess DNA damage in patients infected by Helicobacter pylori - Comparisons between visual and image analyses

Studies of DNA damage in gastric epithelial cells of Helicobacter pylori (H. pylori)-infected patients are conflicting, possibly due to different methods used for scoring DNA damage by Comet assay. Therefore, we compared the sensitivity of visual microscopic analysis (arbitrary units-scores and comets%) and image analysis system (tail moment), in the gastric epithelial cells from the antrum and corpus of 122 H. pylori-infected and 32 non-infected patients. The feasibility of cryopreserved peripheral blood lymphocytes and whole-blood cells for DNA damage biomonitoring was also investigated. In the antrum, the levels of DNA damage were significantly higher in H. pylori-infected patients with gastritis than in non-infected patients with normal mucosa, when evaluated by image analysis system, arbitrary units and comets%. In the corpus, the comets% was not sufficiently sensitive to detect the difference between H. pylori-infected patients with gastritis and non-infected patients with normal mucosa. The image analysis system was sensitive enough to detect differences between non-infected patients and H. pylori-infected patients with mild gastritis and between infected patients with moderate and severe gastritis, in both antrum, and corpus, while arbitrary units and comets% were unable to detect these differences. In cryopreserved peripheral blood lymphocytes, the levels of DNA damage (tail moment) were significantly higher in H. pylori-infected patients with moderate and severe gastritis than in non-infected patients. Overall, our results indicate that the image analysis system is more sensitive and adequate to measure the levels of DNA damage in gastric epithelial cells than the other methods assayed. (c) 2005 Elsevier B.V. All rights reserved.

Structural carbon/epoxy prepregs properties comparison by thermal and rheological analyses

Two different carbon/epoxy prepreg materials were characterized and compared using thermal (DSC, TGA, and DMA) and rheological analyses. A prepreg system (carbon fiber preimpregnated with epoxy resin F584) that is currently used in the commercial airplane industry was compared with a prepreg system that is a prospective candidate for the same applications (carbon fiber prepreg/epoxy resin 8552). The differences in the curing kinetics mechanisms of both prepreg systems were identified through the DSC, TGA, DMA, and rheological analyses. Based on these thermal analysis techniques, it was verified that the curing of both epoxy resin systems follow a cure kinetic of n order. Even though their reaction heats were found to be slightly different, the kinetics of these systems were nevertheless very similar. The activation energies for both prepreg systems were determined by DSC analysis, using Arrhenius's method, and were found to be quite similar. DMA measurements of the cured prepregs demonstrated that they exhibited similar degrees of cure and different glass transition temperatures. Furthermore, the use of the rheological analysis revealed small differences in the gel temperatures of the two prepreg systems that were examined.

Structural and physicochemical characteristics of lintnerized native and sour cassava starches

The comprehension of the structure of starch granules is important for the understanding of its physicochemical properties. Native and sour cassava starches after being analyzed with respect to their pasting properties and baking expansion capacity, were treated with 2.2 N HCl at 38 degreesC for a maximum of nine days. The starch granules remaining after lintnerization were analyzed for amylose content and intrinsic viscosity, by X-ray diffraction, scanning electron microscopy and chromatographic analysis. The results indicated that the acid hydrolysis on all starches occurred in two steps. The first one, with high hydrolysis rate, was characterized by a quick degradation of the amorphous part of the granules whereas the second step, with lower hydrolysis rate, was characterized by a higher resistance of the organized areas of the granules to acid treatment. Most of the amylose chains were found in the amorphous areas of starch granules only a small percentage was involved in the crystalline regions. The microscopic and chromatographic analysis demonstrated that the acid hydrolysis was not able to disrupt the entire granular crystalline structure. Fermented starch showed amylose and/or amylopectin chain fractions resistant to pullulanase, probably due to structural alterations during fermentation.