Studies on the toxicological effects of Asulox-40 and Emisan-6 to eggs and early life history stages of Sarotherodon mossambicus

Toxicological effects of Asulox-40 and Emisan-6 to eggs and early life history stages of Sarotherodon mossambicus were reported. 80% of egg hatching occurred in the controls, 1 p.p.m and 5 p.p.m concentrations of Asulox-40. 10 p.p.m. and 50 p.p.m. concentrations of the same toxicants had 70% and 60% hatchings while in Emisan-6 in the same concentrations the hatching were 70% and! 40%. In 100 p.p.m. concentration of both toxicants 20% incomplete hatching occurred. In Emisan-6 Lc 50 and Lc 100 values were recorded at 32 hand 96h respectively in 10 p.p.m. concentrations. In Asulox-40 the same values were recorded in 24h and 40h respectively at 50 p.p.m. concentration. The fish activity during the experimental period showed initial hyper activity. It was established that the Emisan-6 is more harmful to S. mossambicus than Asulox-40. The harmless concentrations of these chemicals were 1.2 p.p.m. for Asulox-40 and 0.6 p.p.m. for Emisan-6.

Isolation of Salmonella braenderup (6, 7:e, h:e, n, z (sub15)) from Mussel meat

A brief account is given of the morphology, biochemistry and serology of Salmonella braenderup isolated from mussel meat, obtained from fish markets in Calicut, India. Possible implications regarding human salmonellosis are also considered.

Przewalskin A: A new C-23 terpenoid with a 6/6/7 carbon ring skeleton from Salvia przewalskii maxim

Przewalskin A (1), a novel C-23 terpenoid with a 6/6/7 carbon ring skeleton, was isolated from Salvia przewalskii. Its structure was determined by comprehensive 1D NMR, 2D NMR, and MS spectroscopic analysis and subsequently confirmed by a single-crystal X

4-Benzyl-5-ethyl-2-(2-furylcarbonylmethylsulfanyl) pyrimidin-6(1H)-one

The title compound, C19H18N2O3S, shows favourable activity against HIV-1. The phenyl ring is twisted with respect to the pyrimidine ring by 61.56 (9)degrees. Intermolecular N-H center dot center dot center dot O and C-H center dot center dot center dot O

Induced breeding of Indian carps using Des Gly^10 [D-Ala^6] LHRH ethylamide

Details are given of a study conducted in order to determine the efficacy of Des Gly^10 [D-Ala^6] LHRH ethylamide in the induction of spawning in Cirrhinus mrigala and Labeo fimbriatus . Findings shows this LHRH analogue to be a promising substitute for the pituitary gland extract which is currently used. Further studies are required to standardize the dose and method of administration in the various cultivable species in India.

First bi-lateral consultation meeting on Gulf of Mannar ecosystem, Rameshwaram, India, 5-6 September, 2011

Status papers on resources, livelihoods and ecosystem approach to fisheries in the Gulf of Mannar(GoM) were presented.Five priority initiatives were agreed: collaborative effort in conservation and management of charismatic species (e.g. dugong),capacity building and training,education and awareness building, strengthening of data collection and sharing of information.

An illustrated key to the Malacostraca (Crustacea) of the northern Arabian Sea. Part 6: Decapoda anomura

The key deals with the Decapoda, Anomura of the northern Arabian Sea, belonging to 3 super-families, 10 families, 32 genera and 104 species. With few exceptions, each species is accompanied by illustrations of taxonomic importance; its first reporter is referenced, supplemented by a subsequent record from the area. Necessary schematic diagrams explaining terminologies are also included.

Fish products of 6 Asian countries

The paper gives an overview of the 11 main categories of fish products resulting from the survey in Brunei Darussalam, Indonesia, Malaysia, Philippines, Singapore and Thailand.

牛胚胎在BRL/mTCM199和HECM-6/mTCM199培养体系中发育潜能的探讨

将受精卵置于下列两种培养体系中进行体外培养:(1)Buffalo rat liver细胞与改进的TCM199培养液共同培养系统(BRL/mTCM199);(2)半确定培养液两步培养系统[无血清的金黄地鼠培养液与改进的TCM199培养液(HECM-6/mTCM199]。结果表明:后者的囊胚率(50%)明显高于前者的囊胚率(41%,P<0.01)。表明牛胚胎早期分裂可在无蛋白培养条件下进行,并且在此培养条件下有良好的后续发育能力。这可能与两步培养体系中葡萄糖和氨基酸浓度不同有关。

Embodied Energy and Gas Emissions of Retaining Wall Structures

The embodied energy (EE) and gas emissions of four design alternatives for an embankment retaining wall system are analyzed for a hypothetical highway construction project. The airborne emissions considered are carbon dioxide (CO 2), methane (CH 4), nitrous oxide (N 2O), sulphur oxides (SO X), and nitrogen oxides (NO X). The process stages considered in this study are the initial materials production, transportation of construction machineries and materials, machinery operation during installation, and machinery depreciations. The objectives are (1) to determine whether there are statistically significant differences among the structural alternatives; (2) to understand the relative proportions of impacts for the process stages within each design; (3) to contextualize the impacts to other aspects in life by comparing the computed EE values to household energy consumption and car emission values; and (4) to examine the validity of the adopted EE as an environmental impact indicator through comparison with the amount of gas emissions. For the project considered in this study, the calculated results indicate that propped steel sheet pile wall and minipile wall systems have less embodied energy and gas emissions than cantilever steel tubular wall and secant concrete pile wall systems. The difference in CO 2 emission for the retaining wall of 100 m length between the most and least environmentally preferable wall design is equivalent to an average 2.0 L family car being driven for 6.2 million miles (or 62 cars with a mileage of 10,000 miles/year for 10 years). The impacts in construction are generally notable and careful consideration and optimization of designs will reduce such impacts. The use of recycled steel or steel pile as reinforcement bar is effective in reducing the environmental impact. The embodied energy value of a given design is correlated to the amount of gas emissions. © 2011 American Society of Civil Engineers.

Hardfacing using supersonic laser depostion of stellite-6

The capability of manufacturing coatings is of central importance in engineering design. Many components require nowadays the application of additional layers, to enhance mechanical properties and protect against hostile environments. Supersonic Laser Deposition (SLD) is a novel coating method, based upon Cold Spray (CS) principles. In this technique the deposition velocities can be significantly lower than those required for effective bonding in CS applications. The addition of laser heat energy permits a change in the thermodynamic experience of impacting particles, thereby offering a greater opportunity for metallurgical bonding at lower velocities compared to the CS process technology. The work reported in this paper demonstrates the ability of the SLD process to deliver hard facing materials to engineering surfaces. Stellite-6 has been deposited on low carbon steel tubes over a range of process parameters, determining the appropriate target power and traverse speeds for coating deposition. Coating properties and parameters were examined to determine the main properties, micro-structure and processing cost. Their morphology was studied through optical microscopy, SEM and X-Ray Diffraction. The results have shown that SLD is capable of depositing Stellite-6, with enhanced properties compared to laser clad counterparts.

Low temperature (< 100 °c) deposited P-type cuprous oxide thin films: Importance of controlled oxygen and deposition energy

With the emergence of transparent electronics, there has been considerable advancement in n-type transparent semiconducting oxide (TSO) materials, such as ZnO, InGaZnO, and InSnO. Comparatively, the availability of p-type TSO materials is more scarce and the available materials are less mature. The development of p-type semiconductors is one of the key technologies needed to push transparent electronics and systems to the next frontier, particularly for implementing p-n junctions for solar cells and p-type transistors for complementary logic/circuits applications. Cuprous oxide (Cu2O) is one of the most promising candidates for p-type TSO materials. This paper reports the deposition of Cu2O thin films without substrate heating using a high deposition rate reactive sputtering technique, called high target utilisation sputtering (HiTUS). This technique allows independent control of the remote plasma density and the ion energy, thus providing finer control of the film properties and microstructure as well as reducing film stress. The effect of deposition parameters, including oxygen flow rate, plasma power and target power, on the properties of Cu2O films are reported. It is known from previously published work that the formation of pure Cu2O film is often difficult, due to the more ready formation or co-formation of cupric oxide (CuO). From our investigation, we established two key concurrent criteria needed for attaining Cu2O thin films (as opposed to CuO or mixed phase CuO/Cu2O films). First, the oxygen flow rate must be kept low to avoid over-oxidation of Cu2O to CuO and to ensure a non-oxidised/non-poisoned metallic copper target in the reactive sputtering environment. Secondly, the energy of the sputtered copper species must be kept low as higher reaction energy tends to favour the formation of CuO. The unique design of the HiTUS system enables the provision of a high density of low energy sputtered copper radicals/ions, and when combined with a controlled amount of oxygen, can produce good quality p-type transparent Cu2O films with electrical resistivity ranging from 102 to 104 Ω-cm, hole mobility of 1-10 cm2/V-s, and optical band-gap of 2.0-2.6 eV. These material properties make this low temperature deposited HiTUS Cu 2O film suitable for fabrication of p-type metal oxide thin film transistors. Furthermore, the capability to deposit Cu2O films with low film stress at low temperatures on plastic substrates renders this approach favourable for fabrication of flexible p-n junction solar cells. © 2011 Elsevier B.V. All rights reserved.

Seminario sobre ciencias básicas como prerequisito para la enseñanza de la oceanografía (1-2 octubre de 1962)- Seminario sobre biogeografía de los organismos marinos (3-6 octubre de 1962)

Por acuerdo del Seminario Latinoamericano sobre Estudios Oceanográficos realizado en la Universidad de Concepción, Chile, 20-25 noviembre de 1961, se recomendó la realización en Argentina de un Seminario sobre Biogeografía de Organismos Marinos, indicándose al Museo Argentino de Ciencias Naturales Bernardino Rivadavia como sede del mismo. Luego de varias conversaciones en Buenos Aires (Argentina), entre autoridades del Centro de Cooperación Científica para América Latina, del CONICET (Consejo Nacional de Investigaciones Científicas y Técnicas), del Servicio de Hidrografía Naval, del mencionado Museo y del Instituto de Biología Marina de Mar del Plata, se acordó realizar los seminarios en éste último instituto del 1 al 6 octubre de 1962. Del 1 al 2 de octubre, se realizó el Seminario sobre Ciencias Básicas como prerrequisito para la Enseñanza de la Oceanografía, pero los documentos no fueron incluídos en este Boletín. Del 3 al 6 de octubre, tuvo lugar el Seminario sobre Biogeografía de Organismos Marinos, con la participación de investigadores de: Brasil, Colombia, Costa Rica, Chile, Mexico, Perú, Uruguay, Venezuela y de Argentina, y se incluyeron los siguientes trabajos publicados: Joly, A. - Extensao da flora marinha no sul do Brasil- nota preliminar; Etcheverry Daza, H. - Distribución geográfica de las algas del Pacífico; Diaz-Piferrer, M. - Biogeografía de las algas marinas tropicales de la costa Atlántica de America, Resumen,; Kuhneman, O. - Importancia de la vegetación en biogeografía marina; Boschi, E.E. - Los peneidos de Brasil, Uruguay y Argentina; Bernasconi, I. - Distribución geográfica de los equinoideos y asteroideos de la extremidad austral de Sudamérica; Szidat, L. - La parasitología como ciencia auxiliar para la biogeografía de organismos marinos; López, R.B. - Problemas de la distribución geográfica de los peces marinos sudamericanos; Ximénez, I. - Estudio preliminar de la distribución geográfica actual de los pinípedos en América Latina; Balech, E. - La división zonal en biología marina y su nomenclatura; Stuardo, J. - Distribución de los moluscos marinos litorales en Latinoamérica; Boltovskoy, E. - Provincias zoogeográficas de América del Sur y su sector Antártico según los foraminíferos bentónicos; Rioja, E. - Caracteres de la biogeografía marina de México y de Centro América; Balech, E. - Caracteres biogeográficos de la región de Argentina y Uruguay; Vannucci, M. - Zoogeografía marinha do Brasil.