Potassium Measures and Their Associations with Glucose and Diabetes Risk: The Multi-Ethnic Study of Atherosclerosis (MESA).

BACKGROUND: Recent studies have found low-normal potassium (K) to be associated with increased diabetes risk. We sought to verify these associations in a multi-ethnic US cohort; and to determine if these associations extend to US Hispanics and Asian-Americans. METHODS: We analyzed data from Multi-Ethnic Study of Atherosclerosis (MESA) participants who were free-of-diabetes at baseline. We examined cross-sectional associations between measures of K-serum, dietary, and urine-with fasting glucose and HOMA-IR. We examined longitudinal associations between K and diabetes risk over 8 years. FINDINGS: In multivariable models, compared to those with higher serum K (≥4.5mmol/L), those with lower serum K (<4.0mmol/L) had significantly higher fasting glucose [1.3 mg/dL (95%CI 0.2, 2.4), P-value = 0.03]. Incident diabetes developed in 1281 of 5415 at-risk participants. In minimally-adjusted models, we found inverse associations between serum and dietary K and diabetes risk. Compared to those with higher serum K, those with lower serum K had an HR (95% CI) of incident diabetes of 1.23 (1.04, 1.47), P-value = 0.02. However, these associations were attenuated in fully-adjusted models. We found no significant interaction between potassium and ethnicity. CONCLUSIONS: In this multi-ethnic cohort, we found a significant inverse association between serum K and fasting glucose but no significant association with longer-term diabetes risk. This inverse association between potassium and glucose must be studied further to understand the physiology and its potential impact on chronic health.

Chlorine Contribution to Quantitative Structure and Activity Relationship Models of Disinfection By-Products' Quantum Chemical Descriptors and Toxicities

Quantitative Structure-Activity Relationship (QSAR) has been applied extensively in predicting toxicity of Disinfection By-Products (DBPs) in drinking water. Among many toxicological properties, acute and chronic toxicities of DBPs have been widely used in health risk assessment of DBPs. These toxicities are correlated with molecular properties, which are usually correlated with molecular descriptors. The primary goals of this thesis are: 1) to investigate the effects of molecular descriptors (e.g., chlorine number) on molecular properties such as energy of the lowest unoccupied molecular orbital (ELUMO) via QSAR modelling and analysis; 2) to validate the models by using internal and external cross-validation techniques; 3) to quantify the model uncertainties through Taylor and Monte Carlo Simulation. One of the very important ways to predict molecular properties such as ELUMO is using QSAR analysis. In this study, number of chlorine (NCl) and number of carbon (NC) as well as energy of the highest occupied molecular orbital (EHOMO) are used as molecular descriptors. There are typically three approaches used in QSAR model development: 1) Linear or Multi-linear Regression (MLR); 2) Partial Least Squares (PLS); and 3) Principle Component Regression (PCR). In QSAR analysis, a very critical step is model validation after QSAR models are established and before applying them to toxicity prediction. The DBPs to be studied include five chemical classes: chlorinated alkanes, alkenes, and aromatics. In addition, validated QSARs are developed to describe the toxicity of selected groups (i.e., chloro-alkane and aromatic compounds with a nitro- or cyano group) of DBP chemicals to three types of organisms (e.g., Fish, T. pyriformis, and P.pyosphoreum) based on experimental toxicity data from the literature. The results show that: 1) QSAR models to predict molecular property built by MLR, PLS or PCR can be used either to select valid data points or to eliminate outliers; 2) The Leave-One-Out Cross-Validation procedure by itself is not enough to give a reliable representation of the predictive ability of the QSAR models, however, Leave-Many-Out/K-fold cross-validation and external validation can be applied together to achieve more reliable results; 3) ELUMO are shown to correlate highly with the NCl for several classes of DBPs; and 4) According to uncertainty analysis using Taylor method, the uncertainty of QSAR models is contributed mostly from NCl for all DBP classes.

Multi-Scale Visualization and Interpretation of Geological Relationships

Visualization and interpretation of geological observations into a cohesive geological model are essential to Earth sciences and related fields. Various emerging technologies offer approaches to multi-scale visualization of heterogeneous data, providing new opportunities that facilitate model development and interpretation processes. These include increased accessibility to 3D scanning technology, global connectivity, and Web-based interactive platforms. The geological sciences and geological engineering disciplines are adopting these technologies as volumes of data and physical samples greatly increase. However, a standardized and universally agreed upon workflow and approach have yet to properly be developed. In this thesis, the 3D scanning workflow is presented as a foundation for a virtual geological database. This database provides augmented levels of tangibility to students and researchers who have little to no access to locations that are remote or inaccessible. A Web-GIS platform was utilized jointly with customized widgets developed throughout the course of this research to aid in visualizing hand-sized/meso-scale geological samples within a geologic and geospatial context. This context is provided as a macro-scale GIS interface, where geophysical and geodetic images and data are visualized. Specifically, an interactive interface is developed that allows for simultaneous visualization to improve the understanding of geological trends and relationships. These developed tools will allow for rapid data access and global sharing, and will facilitate comprehension of geological models using multi-scale heterogeneous observations.

Methods, Models & Systems for Dealing with Some Business, Management & Engineering Problems

This keynote presentation will report some of our research work and experience on the development and applications of relevant methods, models, systems and simulation techniques in support of different types and various levels of decision making for business, management and engineering. In particular, the following topics will be covered. Modelling, multi-agent-based simulation and analysis of the allocation management of carbon dioxide emission permits in China (Nanfeng Liu & Shuliang Li Agent-based simulation of the dynamic evolution of enterprise carbon assets (Yin Zeng & Shuliang Li) A framework & system for extracting and representing project knowledge contexts using topic models and dynamic knowledge maps: a big data perspective (Jin Xu, Zheng Li, Shuliang Li & Yanyan Zhang) Open innovation: intelligent model, social media & complex adaptive system simulation (Shuliang Li & Jim Zheng Li) A framework, model and software prototype for modelling and simulation for deshopping behaviour and how companies respond (Shawkat Rahman & Shuliang Li) Integrating multiple agents, simulation, knowledge bases and fuzzy logic for international marketing decision making (Shuliang Li & Jim Zheng Li) A Web-based hybrid intelligent system for combined conventional, digital, mobile, social media and mobile marketing strategy formulation (Shuliang Li & Jim Zheng Li) A hybrid intelligent model for Web & social media dynamics, and evolutionary and adaptive branding (Shuliang Li) A hybrid paradigm for modelling, simulation and analysis of brand virality in social media (Shuliang Li & Jim Zheng Li) Network configuration management: attack paradigms and architectures for computer network survivability (Tero Karvinen & Shuliang Li)

The High-Redshift Quasar Luminosity Function from Multi-Epoch Imaging Surveys

Thesis (Ph.D.)--University of Washington, 2016-08

Convex Optimization Algorithms and Statistical Bounds for Learning Structured Models

Thesis (Ph.D.)--University of Washington, 2016-08

The Use of Multi-Criteria Decision Analysis in Performing Alternatives Assessment and Comparative Risk Analysis: The Case Study of Codling Moth Pesticides

Thesis (Ph.D.)--University of Washington, 2016-08

Evaluating a School Community Linked Physical Activity Intervention Programme: a Multi-level Analysis.

Previous research has highlighted the importance of positive physical activity (PA) behaviors during childhood to promote sustained active lifestyles throughout the lifespan (Telama et al. 2005; 2014). It is in this context that the role of schools and teachers in facilitating PA education is promoted. Research suggests that teachers play an important role in the attitudes of children towards PA (Figley 1985) and schools may be an efficient vehicle for PA provision and promotion (McGinnis, Kanner and DeGraw, 1991; Wechsler, Deveraux, Davis and Collins, 2000). Yet despite consensus that schools represent an ideal setting from which to ‘reach’ young people (Department of Health and Human Services, UK, 2012) there remains conceptual (e.g. multi-component intervention) and methodological (e.g. duration, intensity, family involvement) ambiguity regarding the mechanisms of change claimed by PA intervention programmes. This may, in part, contribute to research findings that suggest that PA interventions have had limited impact on children’s overall activity levels and thereby limited impact in reducing children’s metabolic health (Metcalf, Henley & Wilkin, 2012). A marked criticism of the health promotion field has been the focus on behavioural change while failing to acknowledge the impact of context in influencing health outcomes (Golden & Earp, 2011). For years, the trans-theoretical model of behaviour change has been ‘the dominant model for health behaviour change’ (Armitage, 2009); this model focusses primarily on the individual and the psychology of the change process. Arguably, this model is limited by the individual’s decision-making ability and degree of self-efficacy in order to achieve sustained behavioural change and does not take account of external factors that may hinder their ability to realise change. Similar to the trans-theoretical model, socio-ecological models identify the individual at the focal point of change but also emphasises the importance of connecting multiple impacting variables, in particular, the connections between the social environment, the physical environment and public policy in facilitating behavioural change (REF). In this research, a social-ecological framework was used to connect the ways a PA intervention programme had an impact (or not) on participants, and to make explicit the foundational features of the programme that facilitated positive change. In this study, we examined the evaluation of a multi-agency approach to a PA intervention programme which aimed to increase physical activity, and awareness of the importance of physical activity to key stage 2 (age 7-12) pupils in three UK primary schools. The agencies involved were the local health authority, a community based charitable organisation, a local health administrative agency, and the city school district. In examining the impact of the intervention, we adopted a process evaluation model in order to better understand the mechanisms and context that facilitated change. Therefore, the aim of this evaluation was to describe the provision, process and impact of the intervention by 1) assessing changes in physical activity levels 2) assessing changes in the student’s attitudes towards physical activity, 3) examining student’s perceptions of the child size fitness equipment in school and their likelihood of using the equipment outside of school and 4) exploring staff perceptions, specifically the challenges and benefits, of facilitating equipment based exercise sessions in the school environment. Methodology, Methods, Research Instruments or Sources Used Evaluation of the intervention was designed as a matched-control study and was undertaken over a seven-month period. The school-based intervention involved 3 intervention schools (n =436; 224 boys) and one control school (n=123; 70 boys) in a low socioeconomic and multicultural urban setting. The PA intervention was separated into two phases: a motivation DVD and 10 days of circuit based exercise sessions (Phase 1) followed by a maintenance phase (Phase 2) that incorporated a PA reward program and the use of specialist kid’s gym equipment located at each school for a period of 4 wk. Outcome measures were measured at baseline (January) and endpoint (July; end of academic school year) using reliable and valid self-report measures. The children’s attitudes towards PA were assessed using the Children’s Attitudes towards Physical Activity (CATPA) questionnaire. The Physical Activity Questionnaire for Children (PAQ-C), a 7-day recall questionnaire, was used to assess PA levels over a school week. A standardised test battery (Fitnessgram®) was used to assess cardiovascular fitness, body composition, muscular strength and endurance, and flexibility. After the 4 wk period, similar kid’s equipment was available for general access at local community facilities. The control school did not receive any of the interventions. All physical fitness tests and PA questionnaires were administered and collected prior to the start of the intervention (January) and following the intervention period (July) by an independent evaluation team. Evaluation testing took place at the individual schools over 2-3 consecutive days (depending on the number of children to be tested at the school). Staff (n=19) and student perceptions (n = 436) of the child sized fitness equipment were assessed via questionnaires post-intervention. Students completed a questionnaire to assess enjoyment, usage, ease of use and equipment assess and usage in the community. A questionnaire assessed staff perceptions on the delivery of the exercise sessions, classroom engagement and student perceptions. Conclusions, Expected Outcomes or Findings Findings showed that both the intervention (16.4%) and control groups increased their PAQ-C score by post-intervention (p < 0.05); with the intervention (17.8%) and control (21.3%) boys showing the greatest increase in physical activity levels. At post-intervention, there was a 5.5% decline in the intervention girls’ attitudes toward PA in the aesthetic subdomains (p = 0.009); whereas the control boys had an increase in positive attitudes in the health domain (p = 0.003). No significant differences in attitudes towards physical activity were observed in any other domain for either group at post-intervention (p > 0.05). The results of the equipment questionnaire, 96% of the children stated they enjoyed using the equipment and would like to use the equipment again in the future; however at post-intervention only 27% reported using the equipment outside of school in the last 7 days. Students identified the ski walker (34%) and cycle (32%) as their favorite pieces of equipment; with the single joint exercises such as leg extension and bicep/tricep machine (<3%) as their least favorite. Key themes from staff were that the equipment sessions were enjoyable, a novel activity, children felt very grown-up, and the activity was linked to a real fitness experience. They also expressed the need for more support to deliver the sessions and more time required for each session. Findings from this study suggest that a more integrated approach within the various agencies is required, particularly more support to increase teachers pedagogical content knowledge in physical activity instruction which is age appropriate. Future recommendations for successful implementation include sufficient time period for all students to access and engage with the equipment; increased access and marketing of facilities to parents within the local community, and professional teacher support strategies to facilitate the exercise sessions.

Searches for Beyond Standard Model Higgs Bosons in pp collisions at sqrt(s) = 8 and 13 TeV with the ATLAS detector

Thesis (Ph.D.)--University of Washington, 2016-08

The Multi-Faceted Experience of Empathy in Intellectual Disability Settings: An IPA Study

This research thesis explored the concept of empathy. The specific purpose was to further understand the idea of empathy in relation to the experience of male support workers who provide residential care to adults with intellectual disabilities (ID) and challenging behaviour. The thesis aimed to provide some insights into how support workers develop and extract meaning from their experiences of relationships with clients and the impact of this on their own self-care, namely, self-compassion. Since personal accounts of experience were required, a qualitative methodology was employed, Interpretative Phenomenological Analysis (IPA) (Smith, 2004). This methodology was selected as it allows for the exploration and interpretation of idiographic lived experience and meaning making. 8 experienced support workers were interviewed using a semi structured interview. Four superordinate themes emerged from the data. These included: 1. Making sense of the others inner world; 2. Processes that enhance empathic practice; 3. Tensions and conflicts, and 4. Management of distressing feelings. Differing accounts of interpreting the needs of clients were identified which helped participants understand, make sense of their interpersonal experience and participate in their role. These included utilising academic knowledge and senses, particularly sight and hearing, which were seemingly complemented by a level of reflective practice. Additionally, to make sense of the experience of a client, they appeared to put themselves in their position, suggesting a form of empathy. Participants appeared to engage in a process of reflection on their relationships with clients, which helped them think about what they had learned about the person’s needs, moreover, this process enabled them to identify some of their own responses and feelings. However, participants seemed to struggle to recognise the occurrence or impact of distressing emotional experience and to express their feelings, possibly in response to a deep sense of responsibility and fear of transferring emotional distress to others. This dilemma of holding two potentially conflicting views of experience seemed to inhibit self-compassion. Although not specifically testing theories of empathy, from the overall findings, it could be suggested that empathy may be a dynamic, transient process that is influenced by reflexivity, values and context. The context in which participants discussed their practice, and situated within their accounts, suggested a sense of confusion and uncertainty. Consequently, it is suggested this impacted on how participants understood and related to clients, and to themselves. There were some specific implications for Counselling Psychology practice, mostly concerning training and supervision. These included recommendations for staff training and supervision, systemic organisational intervention, policy development, recommendations for revisions to models of specialist care frameworks and clinical training.

Likelihood-Based Inference for Partially Observed Multi-Type Markov Branching Processes

Thesis (Ph.D.)--University of Washington, 2016-08

Multi-physics modelling - A vital component of virtual manufacturing

One of the core tasks of the virtual-manufacturing environment is to characterise the transformation of the state of material during each of the unit processes. This transformation in shape, material properties, etc. can only be reliably achieved through the use of models in a simulation context. Unfortunately, many manufacturing processes involve the material being treated in both the liquid and solid state, the trans-formation of which may be achieved by heat transfer and/or electro-magnetic fields. The computational modelling of such processes, involving the interactions amongst various interacting phenomena, is a consider-able challenge. However, it must be addressed effectively if Virtual Manufacturing Environments are to become a reality! This contribution focuses upon one attempt to develop such a multi-physics computational toolkit. The approach uses a single discretisation procedure and provides for direct interaction amongst the component phenomena. The need to exploit parallel high performance hardware is addressed so that simulation elapsed times can be brought within the realms of practicality. Examples of Multiphysics modelling in relation to shape casting, and solder joint formation reinforce the motivation for this work.

Case-based reasoning as a tool to improve the usability of numerical models

There may be advantages to be gained by combining Case-Based Reasoning (CBR) techniques with numerical models. In this paper we consider how CBR can be used as a flexible query engine to improve the usability of numerical models. Particularly they can help to solve inverse and mixed problems, and to solve constraint problems. We discuss this idea with reference to the illustrative example of a pneumatic conveyor. We describe a model of the problem of particle degradation in such a conveyor, and the problems faced by design engineers. The solution of these problems requires a system that allows iterative sharing of control between user, CBR system, and numerical model. This multi-initiative interaction is illustrated for the pneumatic conveyor by means of Unified Modeling Language (UML) collaboration and sequence diagrams. We show approaches to the solution of these problems via a CBR tool.

Multi-Scale Dynamic Study of Secondary Impact During Drop Testing of Surface Mount Packages

This dissertation focuses on design challenges caused by secondary impacts to printed wiring assemblies (PWAs) within hand-held electronics due to accidental drop or impact loading. The continuing increase of functionality, miniaturization and affordability has resulted in a decrease in the size and weight of handheld electronic products. As a result, PWAs have become thinner and the clearances between surrounding structures have decreased. The resulting increase in flexibility of the PWAs in combination with the reduced clearances requires new design rules to minimize and survive possible internal collisions impacts between PWAs and surrounding structures. Such collisions are being termed ‘secondary impact’ in this study. The effect of secondary impact on board-level drop reliability of printed wiring boards (PWBs) assembled with MEMS microphone components, is investigated using a combination of testing, response and stress analysis, and damage modeling. The response analysis is conducted using a combination of numerical finite element modeling and simplified analytic models for additional parametric sensitivity studies.

Concentrating solar power + desalination plants (CSP+D): models and performance analysis

Tese submetida à Universidade de Lisboa, Instituto Superior Técnico e aprovada em provas públicas para a obtenção do Grau de Doutor em Sistemas Sustentáveis de Energia.