914 resultados para Melhoria energética
Resumo:
This study aimed to account the energy balance of six different farming systems: CMT (minimum tillage with transgenic corn); CMNT (minimum tillage with non-transgenic corn); PCT (conventional tillage with transgenic corn); PCNT (conventional tillage with non-transgenic corn); PDT (no-tillage system with transgenic corn) and PDNT (no-tillage system with non-transgenic corn). The study was carried out at the Experimental Farm Lageado FCA/Unesp, Botucatu - SP. The energy balance was performed by subtracting the total energy inputs by the total energy output. Energy efficiency was calculated by dividing the total energy output by the total energy inputs. The total values of energy inputs and outputs were expressed in MJ.ha-1 (mega joules per hectare). To calculate the energy inputs were accounted the fuel consumption and lubricants, depreciation energy of machinery and implements, manpower and agricultural inputs. The energy outputs were calculated according to the maize yield. The result shows that the system PDT was the system that had better energy efficiency and the system that had the lowest efficiency was the PCT system. The system with lower energy demand was the PDT and the greatest demand was PCNT.
Resumo:
The objective of this study was to characterize energetically beersmade withhoney. The tests of beer production weremade withninetreatments,threecombination of the originalextract concentrations (11, 13and 15 °Brix) and threepercentagesof honeyin the wort formulation(0, 20 and 40%).The experimentwas completely randomizedwith two replications, totaling eighteenplots.Themashingprocesswas performed byinfusion, with honey added in the boiling step. After clarified, the wort had its extract contents corrected with the addition of filtered water and was inoculated withlowfermentation yeast .The fermentation occurred at 10 ° C. The beer was manually bottled and stored in a freezer at 0 °C for 15 days, formaturation. The beers were chemically analyzed on proximate composition (moisture, protein, lipid, ash, and carbohydrate), alcohol content (% m / m) and then calculated the energy value. The results ofchemical analysis andenergetic valuesof the beerswere subjected to analysisof variance (F test) and the means werecompared byTukey testat 5% probability. The commonbeershad the lowestenergy value (31.05 to 31.95 kcal100g-1) in relation toextra(36.42 to 38.42 kcal100g-1) and strong(38.20 to 40.17 kcal100g-1) beers. Theincrease in the original extractin beerraises theircaloric values. The presenceof honeyin the formulationincreasedthe energetic valuesincommon andextrabeersand decreasedin strong.The levelsof alcohol andcarbohydratewere predominant in thebeer energetic values,beingpossible to observeadirect relation amongthese components ofbeer and theircaloric value.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The cane sugar is important since the early days in the history of the country, following the discovery of Brazil since the colonial period, therefore, the culture has an important role in the Brazilian economy, being one of the main products. In the 1970s with the advent of the economic crisis, geopolitical and the possibility of depletion of oil, countries dependent on imported fuel, sought new energy alternatives. In Brazil, it was decreed in 1975 the creation of the National Alcohol Program - PROALCOOL, who had several years of rising, the increase of distilleries and marketing of cars powered with ethanol blend. Due to the decrease in the price of oil the importance of the program significantly reduced, returning to peak only in 1979, ie, the second phase of the program. Conceived as one of the vectors of the national response to the crisis in oil prices '70s, the program persisted at times rising in others not reaching for more than three decades. Brazil is the second largest ethanol producer, second only to the U.S., where the raw material comes from corn, which becomes a bottleneck biodiesel production because it competes with food production. New technologies developed to increase ethanol production combined with sustainability and economic viability are being held, the principal is the second generation ethanol, known as cellulosic ethanol, ethanol plus third and fourth generation.
Resumo:
In this study, organic coffee production systems energy efficiency was estimate. So, an itinerary technical was built since the deployment phase up to the organic coffee production. The inputs used (labor, machine hours, pesticides, fertilizers, etc.) converted into energy units, quantified the energy input, while the production of organic coffee beans benefited was constituted the energy output. Data collection was based on an intentional and non-probabilistic sampling. Nine farmers were interviewed whose main source of income was the coffee production and had keep records of the culture data. The balances were positive, with an energy yield of 626.465MJ.ha-1, compared to an energy expenditure of 112.998MJ.ha-1 during the crop cycle. It is concluded that organic coffee production is energy efficient.
Resumo:
The aim of this work was to proceed, from the energetic point of view, an analysis of a corn agroecosystem, on the direct planting, located at Pirituba II rural workers placement project, Área III, city of Itaberá/SP. The energetic analysis mesured all operations, together with its fisical demands, the inputs and produced grains, classifying them within their respective flux, based on the definition of energy inputs and outputs, converting them into energetic equivalents and, so, determining the energetic matrix of de agroecosystem. The caloric index used were cultural efficiency and cultural liquid energy. The results showed the dependence of the studied systems on the chemical energy sources, from fertilizers (39,49%), agrotoxics (27,74%), and fossile energy of diesel (24,94%). The energetic values of the direct and indirect energy showed a very big difference between them, what means that the energy sources used in the system are not balanced. The cultural efficiency found was 12,86 and cultural liquid energy got to 115.025,92 MJ x ha-1. Later on, obtained data was compared to already existing data in Bueno (2002), who researched conventional planting system. The cultural inputs of both systems were energeticaly different: 9.696,97 MJ x ha-1 (direct planting), e 8.783,78 MJ x ha-1 (convencional planting). The outputs had very different results: 124.722,89 e 79.118,38 MJ x ha-1, respectively. So, we had much more cultural liquid energy on the studied system: 115.025,92 MJ x ha-1, compared to convencional system: 70.334,60 MJ x ha-1. The energectic loss of nitrogened fertilizers contributed for the high energetic loss of both energetic studied matrices. There are few contribution from biological energy source in both systems.
Resumo:
The Brazilian wine industry has a remarkable characteristic that distinguishes from other markets, while the foreign market only accepts products originating from European varieties (Vitis vinifera), in Brazil, products originating from American varieties (Vitis labrusca and Vitis bourquina) and hybrids are also accepted. Dry and sweet varietal wines from varieties Bordô (dry and sweet), Isabel (sweet) e Máximo (dry) were analyzed, by the following chemical standard analyses: alcohol content; density; total and reduced dry matter; alcohol/reduced dry extract ratio; reducing sugars; total, volatile and fixed acidity; pH; total and free sulfur dioxide; and energy value. All analyzed wines presented results within the parameters set forth by Brazilian law, a positive fact, once they are commercialized. The varietal wine Máximo presented a low content of total and free sulfur dioxide, which may cause future problems with its sanity.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Pós-graduação em Engenharia de Produção - FEG
Resumo:
Pós-graduação em Engenharia de Produção - FEG
Resumo:
In a highly competitive and globally integrated market, excellence in production processes has become a survival factor, instead of just a differential point. In this context, companies from various sectors have resorted to philosophies and techniques already established in the literature to improve the efficiency of their production processes. This paper discusses aspects and techniques used to improve the production efficiency of a multinational company that manufactures surgical devices to a global market. Through DMAIC methodology, there were found opportunities to improve machines' efficiency by OEE, an efficiency indicator, in Kaizen Events. A case study was conducted to analyze the methodology and to identify good practices and difficulties along the way
Resumo:
A transmissão de Doenças Sexualmente Transmissíveis (DSTs) tem aumentado significativamente nos últimos anos entre os adolescentes, como apresentam os dados do Boletim Epidemiológico de AIDS publicado pelo Ministério da Saúde, juntamente com o aumento do número de adolescentes grávidas. Dessa forma, o projeto de extensão PET - Saúde objetiva transmitir um conhecimento prevencionista aos jovens vulneráveis a essa situação, trabalhando com estudantes do ciclo II do ensino fundamental dos colégios municipais de Nova Europa. Os alunos que participaram da atividade responderam voluntariamente um questionário antes e após a atividade, que avaliava qualitativamente o conhecimento que possuíam acerca do tema DSTs e gravidez na adolescência. Através da análise desses questionários, foi possível perceber que os jovens possuíam conhecimento sobre o uso de preservativo para a prevenção de DSTs e gravidez (86,9% e 82,8%), mas que o mesmo não se aplicava quanto ao conhecimento de sintomas de DSTs (66,8%), que foi aprimorado após a atividade (80%). Além disso, as meninas apresentaram conhecimento acerca de outros métodos contraceptivos diferentes do preservativo e importância da vacina contra o HPV, provavelmente pelo fato dos meninos lidarem com a vida sexual de uma forma diferente. Apesar de conhecimento prévio sobre o assunto, ações educativas contínuas podem aumentar o conhecimento dos jovens sobre DSTs e gravidez.
Resumo:
The objective of this study was to identify the facilitators and restrictive factors promoted by the organizational culture on the implementation of a continuous improvement program in a company. The influence of organizational culture on tools used to improve processes and results demonstrate critical factors for international competitiveness, reflecting a company's strategy. Depending on how new working methods are implemented, organizational changes to reduce variation and waste, such as lean production, can affect the employee experience in the workplace and their learning conditions. Changes and formalization of the work process can be coercive, characterized by forced compliance, introduction of rules, and focus on technical and financial methods; or may be favorable, encouraging employee involvement in problem solving and stressing learning and innovation. The basis of the analysis lies with two models for assessing organizational culture - Denison Model and Competing Values Framework. The methodology used was: conducting interviews, a questionnaire, literature review and documentary analysis of a large company equipment industry. Results suggest that organizational culture plays an important role in the adoption of Lean practices. It can contribute to its effectiveness and job satisfaction, but it is not decisive feature of their success. The conclusion is that the organizational culture becomes a driving factor when aligned to the proposed practices and when taken into consideration for planning, acting as a limitation when it does not promote development and a participative environment