CT Image Electron Density Quantification in Regions with Metal Implants: Implications for Radiotherapy Treatment Planning

In radiotherapy planning, computed tomography (CT) images are used to quantify the electron density of tissues and provide spatial anatomical information. Treatment planning systems use these data to calculate the expected spatial distribution of absorbed dose in a patient. CT imaging is complicated by the presence of metal implants which cause increased image noise, produce artifacts throughout the image and can exceed the available range of CT number values within the implant, perturbing electron density estimates in the image. Furthermore, current dose calculation algorithms do not accurately model radiation transport at metal-tissue interfaces. Combined, these issues adversely affect the accuracy of dose calculations in the vicinity of metal implants. As the number of patients with orthopedic and dental implants grows, so does the need to deliver safe and effective radiotherapy treatments in the presence of implants. The Medical Physics group at the Cancer Centre of Southeastern Ontario and Queen's University has developed a Cobalt-60 CT system that is relatively insensitive to metal artifacts due to the high energy, nearly monoenergetic Cobalt-60 photon beam. Kilovoltage CT (kVCT) images, including images corrected using a commercial metal artifact reduction tool, were compared to Cobalt-60 CT images throughout the treatment planning process, from initial imaging through to dose calculation. An effective metal artifact reduction algorithm was also implemented for the Cobalt-60 CT system. Electron density maps derived from the same kVCT and Cobalt-60 CT images indicated the impact of image artifacts on estimates of photon attenuation for treatment planning applications. Measurements showed that truncation of CT number data in kVCT images produced significant mischaracterization of the electron density of metals. Dose measurements downstream of metal inserts in a water phantom were compared to dose data calculated using CT images from kVCT and Cobalt-60 systems with and without artifact correction. The superior accuracy of electron density data derived from Cobalt-60 images compared to kVCT images produced calculated dose with far better agreement with measured results. These results indicated that dose calculation errors from metal image artifacts are primarily due to misrepresentation of electron density within metals rather than artifacts surrounding the implants.

Multiple training interventions significantly improve reproducibility of PET/CT-based lung cancer radiotherapy target volume delineation using an IAEA study protocol

BACKGROUND AND PURPOSE: To assess the impact of a standardized delineation protocol and training interventions on PET/CT-based target volume delineation (TVD) in NSCLC in a multicenter setting.

MATERIAL AND METHODS: Over a one-year period, 11 pairs, comprised each of a radiation oncologist and nuclear medicine physician with limited experience in PET/CT-based TVD for NSCLC from nine different countries took part in a training program through an International Atomic Energy Agency (IAEA) study (NCT02247713). Teams delineated gross tumor volume of the primary tumor, during and after training interventions, according to a provided delineation protocol. In-house developed software recorded the performed delineations, to allow visual inspection of strategies and to assess delineation accuracy.

RESULTS: Following the first training, overall concordance indices for 3 repetitive cases increased from 0.57±0.07 to 0.66±0.07. The overall mean surface distance between observer and expert contours decreased from -0.40±0.03 cm to -0.01±0.33 cm. After further training overall concordance indices for another 3 repetitive cases further increased from 0.64±0.06 to 0.80±0.05 (p=0.01). Mean surface distances decreased from -0.34±0.16 cm to -0.05±0.20 cm (p=0.01).

CONCLUSION: Multiple training interventions improve PET/CT-based TVD delineation accuracy in NSCLC and reduces interobserver variation.

Analisi e ottimizzazione del flusso di approvvigionamento in una produzione su commessa: il caso CT Pack S.r.l.

La tesi ha l'obiettivo di analizzare e ottimizzare i flussi di approvvigionamento in un'azienda che produce su commessa: CT Pack S.r.L, specializzata nella realizzazione di macchine automatiche per il packaging di biscotti, gelato e cioccolato. Per raggiungere l'obiettivo si è preso come riferimento il modello proposto dal BPR (Business Process Reengineering): sono stati analizzati i principali attori coinvolti, in particolare fornitori e magazzino, mediante l'uso di KPI definiti ad hoc. Sulla base di questi sono stati individuati due processi critici: il primo riguarda la gestione del magazzino, che presenta un'elevata quantità di codici non movimentati anche a causa del processo di gestione del materiale avanzato al termine di ciascuna commessa; il secondo riguarda il materiale a consumo, che impiega i magazzinieri per un tempo eccessivo, è caratterizzato da giacenze per il 30% non movimentate e da supermarket collocati in officina ridondanti e caratterizzati da bassi tassi di utilizzo (anche sotto il 50%). Per risolvere questi problemi ed effettuare una riprogettazione si fa affidamento agli strumenti proposti dal project management: si imposta quindi un progetto che ha l'obiettivo di ridurre nel breve periodo il valore di magazzino mediante lo smaltimento attraverso diverse vie di codici non utilizzati e agisce nel lungo periodo per evitare che le criticità si ripropongano. Mediante la riprogettazione della gestione dei resi di produzione si prevede un maggior controllo, grazie al lavoro congiunto di ufficio tecnico e ufficio acquisti. La nuova gestione del materiale a consumo ha in se alcune delle tecniche proposte dalla lean production (il kanban, per esempio) e integra il fornitore nella catena di approvvigionamento, garantendo un maggior controllo sulle quantità, un risparmio di circa 7 h/mese di lavoro per i magazzinieri e una riduzione delle giacenze del 46%.

Myocardial blood flow quantification by Rb-82 cardiac PET/CT: A detailed reproducibility study between two semi-automatic analysis programs.

BACKGROUND: Several analysis software packages for myocardial blood flow (MBF) quantification from cardiac PET studies exist, but they have not been compared using concordance analysis, which can characterize precision and bias separately. Reproducible measurements are needed for quantification to fully develop its clinical potential. METHODS: Fifty-one patients underwent dynamic Rb-82 PET at rest and during adenosine stress. Data were processed with PMOD and FlowQuant (Lortie model). MBF and myocardial flow reserve (MFR) polar maps were quantified and analyzed using a 17-segment model. Comparisons used Pearson's correlation ρ (measuring precision), Bland and Altman limit-of-agreement and Lin's concordance correlation ρc = ρ·C b (C b measuring systematic bias). RESULTS: Lin's concordance and Pearson's correlation values were very similar, suggesting no systematic bias between software packages with an excellent precision ρ for MBF (ρ = 0.97, ρc = 0.96, C b = 0.99) and good precision for MFR (ρ = 0.83, ρc = 0.76, C b = 0.92). On a per-segment basis, no mean bias was observed on Bland-Altman plots, although PMOD provided slightly higher values than FlowQuant at higher MBF and MFR values (P < .0001). CONCLUSIONS: Concordance between software packages was excellent for MBF and MFR, despite higher values by PMOD at higher MBF values. Both software packages can be used interchangeably for quantification in daily practice of Rb-82 cardiac PET.

Exploitation de l'analyse par graphes au niveau élémentaire en vue d'investigations du côté des attitudes et des habiletés logiques

L'école d'hier faisait de la grammaire et de l'analyse un usage prépondérant dans l'apprentissage de la langue. Une longue série de règles appliquées dans des exercices structurés préparait une certaine élite d'étudiants à "faire leurs humanités". Le temps passe, les choses évoluent, la grammaire se transforme. Lorsque nous avons commencé à enseigner au niveau élémentaire, les cours de grammaire et d'analyse ne différaient pas tellement de ceux des générations antérieures. Puis vinrent les années '70. Un programme cadre est instauré. Les maîtres endossent la responsabilité de la méthode utilisée et de son application. Une période d'instabilité se creuse, dont les élèves sont les plus grandes victimes. Nous atteignons la période critique où l'on constate que peu d'enfants maîtrisent leur orthographe d'usage à la fin de leur cours primaire. À qui imputer la faute? Devons-nous revenir à un enseignement systématique de la grammaire? Cette période nous aura permis de constater l'inefficacité de nos leçons traditionnelles en vue d'acquisitions orthographiques chez nos enfants; préférence accordée à l'induction des règles grammaticales usuelles; élimination des connaissances grammaticales inutiles aux besoins immédiats des élèves. Telle Tut notre option en ce qui concerne la grammaire. Mais que dire de l'analyse logique? […]

Oncological patient anxiety in imaging studies: the PET/CT example

The purpose of this study was to investigate the subjective perception of anxiety pre- and post-procedure, and explore the relationship between demographic, clinical variables and cancer patients' anxiety during a positron emission tomography/computed tomography (PET/CT) scan. Two hundred and thirty-two oncological out patients, with clinical indication for performing an (18)F-2-fluoro-2-deoxy-D-glucose ((18)F-FDG) PET/CT scan and attending a nuclear medicine (NM) department, participated in the study. Patients' anxiety and subjective experience of PET/CT were examined using two self-report questionnaires. The pre-procedure questionnaire focused on demographic information, level of knowledge regarding the scan and subjective perception of anxiety before the procedure. The post-procedure questionnaire included the subjective perception anxiety after the procedure, information adequacy and satisfaction with the NM department. The self-reported data indicate that patients were anxious during PET/CT. Furthermore, our data revealed a significant difference between the anxiety pre-procedure and post-procedure (z = -3909, p < 0.05), in which the anxiety pre-procedure has significantly higher values. No significant correlation was found between anxiety and age of the patients, education levels, adequacy of information or satisfaction with the NM Department. Perception of anxiety post-procedure differs between gender (U = 5641, p = 0.033). In conclusion, PET/CT generated anxiety levels in oncological patients, especially before the procedure. Although patients seemed to be satisfied with information delivered by staff and with the NM Department, attention has to be focused on effective interventions strategies that help patients to reduce anxiety.

PET e PET/CT com FDG: comparação de duas bases de dados de referência do normal com SUV

Mestrado em Medicina Nuclear - Área de especialização: Tomografia por Emissão de Positrões

Lesion detection performance: comparative analysis of low-dose CT data of the chest on two hybrid imaging systems

Incidental findings on low-dose CT images obtained during hybrid imaging are an increasing phenomenon as CT technology advances. Understanding the diagnostic value of incidental findings along with the technical limitations is important when reporting image results and recommending follow-up, which may result in an additional radiation dose from further diagnostic imaging and an increase in patient anxiety. This study assessed lesions incidentally detected on CT images acquired for attenuation correction on two SPECT/CT systems. Methods: An anthropomorphic chest phantom containing simulated lesions of varying size and density was imaged on an Infinia Hawkeye 4 and a Symbia T6 using the low-dose CT settings applied for attenuation correction acquisitions in myocardial perfusion imaging. Twenty-two interpreters assessed 46 images from each SPECT/CT system (15 normal images and 31 abnormal images; 41 lesions). Data were evaluated using a jackknife alternative free-response receiver-operating-characteristic analysis (JAFROC). Results: JAFROC analysis showed a significant difference (P < 0.0001) in lesion detection, with the figures of merit being 0.599 (95% confidence interval, 0.568, 0.631) and 0.810 (95% confidence interval, 0.781, 0.839) for the Infinia Hawkeye 4 and Symbia T6, respectively. Lesion detection on the Infinia Hawkeye 4 was generally limited to larger, higher-density lesions. The Symbia T6 allowed improved detection rates for midsized lesions and some lower-density lesions. However, interpreters struggled to detect small (5 mm) lesions on both image sets, irrespective of density. Conclusion: Lesion detection is more reliable on low-dose CT images from the Symbia T6 than from the Infinia Hawkeye 4. This phantom-based study gives an indication of potential lesion detection in the clinical context as shown by two commonly used SPECT/CT systems, which may assist the clinician in determining whether further diagnostic imaging is justified.

CT en la universidad: implantación de un programa de calidad total en un establecimiento universitario

En los años cincuenta, dos americanos llegaron al Japón con una nueva filosofía para el éxito industrial. W. Edwards Deming y J.M. Juran argumentaban que el mejoramiento de la calidad conducía automáticamente al mejoramiento de la productividad, que una organización inspirada a satisfacer las necesidades de sus clientes tendría éxito. Los japoneses escucharon. Hoy en día, el Japón goza de una reputación sin igual en cuanto a eficiencia económica, control de la calidad y servicio a los clientes.

effects of weight and injected dose in the liver’s Signal-to-Noise Ratio in patients submitted to PET/CT scans

The quality of the image of 18F-FDG PET/CT scans in overweight patients is commonly degraded. This study evaluates, retrospectively, the relation between SNR, weight and dose injected in 65 patients, with a range of weights from 35 to 120 kg, with scans performed using the Biograph mCT using a standardized protocol in the Nuclear Medicine Department at Radboud University Medical Centre in Nijmegen, The Netherlands. Five ROI’s were made in the liver, assumed to be an organ of homogenous metabolism, at the same location, in five consecutive slices of the PET/CT scans to obtain the mean uptake (signal) values and its standard deviation (noise). The ratio of both gave us the Signal-to- Noise Ratio in the liver. With the help of a spreadsheet, weight, height, SNR and Body Mass Index were calculated and graphs were designed in order to obtain the relation between these factors. The graphs showed that SNR decreases as the body weight and/or BMI increased and also showed that, even though the dose injected increased, the SNR also decreased. This is due to the fact that heavier patients receive higher dose and, as reported, heavier patients have less SNR. These findings suggest that the quality of the images, measured by SNR, that were acquired in heavier patients are worst than thinner patients, even though higher FDG doses are given. With all this taken in consideration, it was necessary to make a new formula to calculate a new dose to give to patients and having a good and constant SNR in every patient. Through mathematic calculations, it was possible to reach to two new equations (power and exponential), which would lead to a SNR from a scan made with a specific reference weight (86 kg was the considered one) which was independent of body mass. The study implies that with these new formulas, patients heavier than the reference weight will receive higher doses and lighter patients will receive less doses. With the median being 86 kg, the new dose and new SNR was calculated and concluded that the quality of the image remains almost constant as the weight increases and the quantity of the necessary FDG remains almost the same, without increasing the costs for the total amount of FDG used in all these patients.

A Importância de estudos dinâmicos em PET/CT para avaliação de doenças oncológicas

A Medicina Nuclear (MN) permite investigar o estado fisiológico dos tecidos de forma minimamente invasiva, usando radiofármacos (rf’s), moléculas compostas por um análogo biológico específico desses processos fisiológicos e um marcador radioativo (radionuclídeo). PET/CT (do acrónimo inglês Positron Emission Tomography/Computed Tomography), uma das modalidades de imagem em MN, está a expandir-se rapidamente em muitos Países. As imagens obtidas revelam a biodistribuição dos rf’s usados e permitem conhecer a sua distribuição precisa no organismo. 18F-Fluorodesoxiglicose (FDG), um análogo da glicose, é o rf mais comumente utilizado, isto porque em neoplasias as células são geralmente caracterizadas pelo aumento do metabolismo da glicose. A quantificação realizada em imagens de PET, tem por base uma estimativa quantitativa do metabolismo da glicose no tumor, utilizando o índice de captação estandardizado, SUV (do acrónimo inglês Standard Uptake Value). A realização de estudos dinâmicos em PET/CT, isto é, realizados em sequência temporal imediatamente após a administração endovenosa do rf e, durante um período de tempo pré-determinado (por exemplo, 15 minutos) permite que o registo da cinética inicial dos rf’s seja estudado. A análise dos dados obtidos com o estudo dinâmico permite compreender o grau e a perfusão tumoral. Habitualmente, quanto maior a captação de 18F-FDG num tumor, maior é a sua atividade metabólica glicolítica, o que tem sido traduzido em maior agressividade tumoral. Nesta investigação, realizaram-se estudos dinâmicos num grupo restrito de patologias oncológicas, nomeadamente: carcinoma da bexiga, carcinoma do colo do útero, carcinoma colorretal, carcinoma do endométrio, metástases hepáticas e adenocarcinoma pancreático. Realizaram-se estudos dinâmicos durante cerca de 10/15 minutos, com 1minuto por frame. O objetivo desta Investigação é tentar compreender se, tumores com maior perfusão respondem melhor à Radioterapia (RT), ou se, a resposta é independente da perfusão. Para avaliar os valores de SUV’s ao longo tempo, realizaram-se ROI’s (do acrónimo inglês Region of Interest), nas artérias femorais ou aorta e na lesão tumoral. Com estes dados, criaram-se gráficos de atividade/tempo onde, no eixo das abcissas é representado o tempo e no eixo das ordenadas os valores de SUV. A partir destes gráficos e dos dados neles contidos, calculou-se o Índice de Perfusão Tumoral através de 2 métodos: A, Método Trapezoidal de Aproximação que relaciona a razão entre a área perfusional do tumor e a área de fluxo arterial, até ao momento do cruzamento das curvas; B, mais simples, calculando o Índice de Perfusão do Tumor através da razão entre o valor de SUV máximo da curva tumoral e da curva arterial até ao momento do cruzamento das curvas. O Método de Comparação de Métodos de Altman&Bland, revelou que tanto o método A como o método B são semelhantes para o cálculo do Índice de Perfusão Tumoral. Em conclusão, apesar do número reduzido de indivíduos estudados, os dados apresentados indicam que existe uma tendência para que haja melhor resposta à RT por parte dos tumores com maior índice metabólico e maior índice de perfusão. Os tumores com menor índice metabólico e menor grau perfusional parece que respondem pior à RT.