960 resultados para MCM-41 type materials
Resumo:
Different types of heterogeneous catalysts of the silicoaluminophosphate type, (SAPO-5, SAPO-11, SAPO-31, SAPO-34 and SAPO-41), molecular sieves with a: AFI, AEL, ATO, CHA and AFO structure, respectively, were synthesized through the hydrothermal method. Using sources such as hydrated alumina (pseudobohemita), phosphoric acid, silica gel, water, as well as, different types of organic structural templates, such as: cetyltrimethylammonium bromide (CTMABr), di-isopropylamine (DIPA), di-n- propylamine (DNPA) and tetraethylammonium hydroxide (TEOS), for the respective samples. During the preparation of the silicoaluminophosphates, the crystallization process of the samples occurred at a temperature of approximately 200 ° C, ranging through periods of 18-72 h, when it was possible to obtain pure phases for the SAPOs. The materials were furthermore washed with deionized water, dried and calcined to remove the molecules of the templates. Subsequently the samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), absorption spectroscopy in the infrared region (FT-IR), specific surface area and thermal analysis via TG/DTG. The acidic properties were determined using adsorption of n-butylamine followed by programmed termodessorption. These methods revealed that the SAPO samples showed a typically weak to moderate acidity. However, a small amount of strong acid sites was also detected. The deactivation of the catalysts was conducted by artificially coking the samples, followed by n-hexane cracking reactions in a fixed bed with a continuous flow micro-reactor coupled on line to a gas chromatograph. The main products obtained were: ethane, propane, isobutene, n-butane, n-pentane and isopentane. The Vyazovkin (model-free) kinetics method was used to determine the catalysts regeneration and removal of the coke
Resumo:
For climate risk management, cumulative distribution functions (CDFs) are an important source of information. They are ideally suited to compare probabilistic forecasts of primary (e.g. rainfall) or secondary data (e.g. crop yields). Summarised as CDFs, such forecasts allow an easy quantitative assessment of possible, alternative actions. Although the degree of uncertainty associated with CDF estimation could influence decisions, such information is rarely provided. Hence, we propose Cox-type regression models (CRMs) as a statistical framework for making inferences on CDFs in climate science. CRMs were designed for modelling probability distributions rather than just mean or median values. This makes the approach appealing for risk assessments where probabilities of extremes are often more informative than central tendency measures. CRMs are semi-parametric approaches originally designed for modelling risks arising from time-to-event data. Here we extend this original concept beyond time-dependent measures to other variables of interest. We also provide tools for estimating CDFs and surrounding uncertainty envelopes from empirical data. These statistical techniques intrinsically account for non-stationarities in time series that might be the result of climate change. This feature makes CRMs attractive candidates to investigate the feasibility of developing rigorous global circulation model (GCM)-CRM interfaces for provision of user-relevant forecasts. To demonstrate the applicability of CRMs, we present two examples for El Ni ? no/Southern Oscillation (ENSO)-based forecasts: the onset date of the wet season (Cairns, Australia) and total wet season rainfall (Quixeramobim, Brazil). This study emphasises the methodological aspects of CRMs rather than discussing merits or limitations of the ENSO-based predictors.
Resumo:
Numerosos estudios mencionan que la sobreexpresión de la proteína p16, un marcador biológico que permite identificar lesiones preneoplásicas del epitelio exocervical, tendría una alta asociación con el Papiloma Virus Humano (HPV) de alto riesgo oncogénico. Es un estudio descriptivo correlacional cuyo objetivo fue establecer asociación de las Neoplasias Intraepiteliales Cervicales grado I (NIC I), HPV positivos, con la expresión del p16. Materiales, métodos y resultados: Es un estudio correlacional que se realizó en el período de noviembre de 2009 a noviembre de 2010; se presentaron 256 casos de NIC I de los cuales, 72 fueron HPV positivos; se practicó técnica de p16. La edad promedio de las mujeres fue de 41 años. Se encontró positividad para el p16 en 40 casos (55.6%) y fueron negativos 32 (44.4%). De los casos positivos para p16, los tipos virales más frecuentes fueron los de alto riesgo: 33 (82.5%). El p16 fue valorado en cuantía, distribución e intensidad, estableciéndose relación entre la intensidad del p16 con los virus de alto riesgo (p=0.038). Cuando se analizó la edad y el tipo viral, pacientes entre 20 y 40 años (36 casos, 90%) presentaron genoma de HPV de alto riesgo. Conclusiones: Existió correlación entre la intensidad del p16 con la presencia de HPV de alto riesgo, ayudando a seleccionar grupos con tendencia a la progresión de la enfermedad.
Resumo:
Ambipolar organic field-effect transistors (OFETs), which can efficiently transport both holes and electrons, using a single type of electrode, are currently of great interest due to their possible applications in complementary metal oxide semiconductor (CMOS)-like circuits, sensors, and in light-emitting transistors. Several theoretical and experimental studies have argued that most organic semiconductors should be able to transport both types of carrier, although typically unipolar behavior is observed. One factor that can compromise ambipolar transport in organic semiconductors is poor solid state overlap between the HOMO (p-type) or LUMO (n-type) orbitals of neighboring molecules in the semiconductor thin film. In the search of low-bandgap ambipolar materials, where the absence of skeletal distortions allows closer intermolecular π-π stacking and enhanced intramolecular π-conjugation, a new family of oligothiophene-naphthalimide assemblies have been synthesized and characterized, in which both donor and acceptor moieties are directly conjugated through rigid linkers. In previous works we found that oligothiophene-napthalimide assemblies connected through amidine linkers (NDI derivates) exhibit skeletal distortions (50-60º) arising from steric hindrance between the carbonyl group of the arylene core and the sulphur atom of the neighbored thiophene ring (see Figure 1). In the present work we report novel oligo- and polythiophene–naphthalimide analogues NAI-3T, NAI-5T and poly-NAI-8C-3T, in which the connections of the amidine linkage have been inverted in order to prevent steric interactions. Thus, the nitrogen atoms are directly connected to the naphthalene moiety in NAI derivatives while they were attached directly to the thiophene moiety in the previously investigated NDI-3T and NDI-5T. In Figure 1 is depicted the calculated molecular structure of NAI-3T together with that of NDI-3T showing how the steric interactions are not present in the novel NAI derivative. The planar skeletons in these new family induce higher degree of crystallinity and the carrier charge transport can be switched from n-type to ambipolar behaviour. The highest FET performance is achieved for vapor-deposited films of NAI-3T with mobilities of 1.95x10-4cm2V-1s-1 and 2.00x10-4cm2V-1s-1 for electrons and holes, respectively. Finally, these planar semiconductors are compared with their NDI derivates analogues, which exhibit only n-type mobility, in order to understand the origin of the ambipolarity in this new series of molecular semiconductors.
Resumo:
Background and aims: The selective SGLT2 inhibitor dapagliflozin (DAPA) reduces hyperglycaemia independently of insulin secretion or action by inhibiting renal glucose reabsorption. This study (MB102014) is a randomised double-blind, placebo (PBO)-controlled trial of DAPA added to metformin (MET) in T2DM (n=546) inadequately controlled with MET alone. Previously reported short-term data at week 24 showed significant mean reductions in the primary [HbA1c] and secondary [fasting plasma glucose (FPG) and weight] endpoints with DAPA compared to PBO. Here we report efficacy and safety results at week 102 of the long-term extension. Materials and methods: Patients aged 18-77 years with HbA1c 7-10% received DAPA 2.5 mg, 5 mg, 10 mg or PBO, plus open-label MET (≥1500mg/d). Exploratory endpoints at week 102 included changes from baseline in HbA1c, FPG and weight, and were analyzed by longitudinal repeated measures analysis. Results: Overall 71.2% of patients completed 102 weeks of the study; fewer on PBO (63.5%) than on DAPA 2.5 mg, 5 mg, and 10 mg (68.3%, 73.0%, 79.8%), due mainly to more patients on PBO discontinuing for lack of efficacy. At week 102, all DAPA groups showed greater mean reductions from baseline in HbA1c, FPG and weight compared to PBO (table), effects that were similar to those observed at week 24 and maintained throughout the trial. More patients at week 102 also achieved a therapeutic response of HbA1c<7% with DAPA 2.5 mg, 5 mg, and 10 mg (20.7%, 26.4%, 31.5%) than with PBO (15.4%). Adverse events (AEs), serious AEs and AEs leading to discontinuation were balanced across all groups. Signs and symptoms suggestive of genital infection (GenInf) were reported in 11.7%, 14.6%, 12.6% (DAPA 2.5 mg, 5 mg, 10 mg) and 5.1% (PBO) of patients, with 1 discontinuation due to GenInf. Signs and symptoms suggestive of urinary tract infection (UTI) were reported in 8.0%, 8.8%, 13.3% (DAPA 2.5 mg, 5 mg, 10 mg) and 8.0% (PBO), with 1 discontinuation due to UTI. No event of pyelonephritis was reported. Conclusion: In comparison to PBO, DAPA added to MET over 102 weeks demonstrated greater and sustained improvements in glycaemic control, clinically meaningful reduction in weight, and no increased risk of hypoglycaemia in patients with T2DM inadequately controlled with MET alone.
Resumo:
The isoprene degradation mechanism included in version 3 of the Master Chemical Mechanism (MCM v3) has been evaluated and refined, using the Statewide Air Pollution Research Center (SAPRC) environmental chamber datasets on the photo-oxidation of isoprene and its degradation products, methacrolein (MACR) and methylvinyl ketone (MVK). Prior to this, the MCM v3 butane degradation chemistry was also evaluated using chamber data on the photo-oxidation of butane, and its degradation products, methylethyl ketone (MEK), acetaldehyde (CH3CHO) and formaldehyde (HCHO), in conjunction with an initial evaluation of the chamber-dependent auxiliary mechanisms for the series of relevant chambers. The MCM v3 mechanisms for both isoprene and butane generally performed well and were found to provide an acceptable reaction framework for describing the NOx-photo-oxidation experiments on the above systems, although a number of parameter modifications and refinements were identified which resulted in an improved performance. All these relate to the magnitude of sources of free radicals from organic chemical process, such as carbonyl photolysis rates and the yields of radicals from the reactions of O3 with unsaturated oxygenates, and specific recommendations are made for refinements. In addition to this, it was necessary to include a representation of the reactions of O(3P) with isoprene, MACR and MVK (which were not previously treated in MCM v3), and conclusions are drawn concerning the required extent of free radical formation from these reactions. Throughout the study, the performance of MCM v3 was also compared with that of the SAPRC-99 mechanism, which was developed and optimized in conjunction with the chamber datasets.
Resumo:
The purpose of this paper is to isolate and discuss a distinctive type of Hiberno-Viking silver armring. Here termed the 'coiled armring', it is dated to the late ninth/early tenth centuries. The methods of manufacture, ornamentation, date and origins of the type are discussed and the objects are assessed against the background of hoard-associated material and related types of silver armrings. A descriptive catalogue of the material is provided.
Resumo:
Background Ageing and type 2 diabetes mellitus (T2DM) are risk factors for skeletal muscle loss. We investigated whether anabolic resistance to feeding might underlie accelerated muscle loss in older people with T2DM and whether dysregulated mTOR signalling was implicated. Subjects 8 obese men with T2DM, and 12 age-matched controls were studied (age 68±3 vs. 68±6y; BMI: 30±2 vs. 27±5 kg·m-2). Methods Body composition was measured by dual-X-ray absorptiometry. Insulin and glucose were clamped at post-absorptive concentrations (13±2 vs. 9±3 mU·l-1; 7.4±1.9 vs. 4.6±0.4 mmol·l-1; T2DM vs. controls). Fractional synthetic rates (FSR) of myofibrillar and sarcoplasmic proteins were measured as the rate of incorporation of [13C] leucine during a primed, constant infusion of [1-13C] α-ketoisocaproic acid, 3 h after 10 or 20g of essential amino acids (EAA) were orally administered. Protein expression of total and phosphorylated mTOR signalling proteins was determined by Western blot analysis. Results Despite a significantly lower appendicular lean mass index and a greater fat mass index in T2DM vs. controls, basal myofibrillar and sarcoplasmic and post-prandial myofibrillar FSR were similar. After 20g EAA, stimulation of sarcoplasmic FSR was slightly blunted in T2DM patients. Furthermore, feeding 20g EAA increased phosphorylation of mTOR, p70S6k and 4E-BP1 by 60-100% in controls with no response observed in T2DM. Conclusions There was clear dissociation between changes in mTOR signalling versus changes in protein synthesis rates. However, the intact anabolic response of myofibrillar FSR to feeding in both groups suggests anabolic resistance may not explain accelerated muscle loss in T2DM.
Resumo:
We investigated the effect of different exercise modalities on high sensitivity-C reactive protein (hs-CRP) and other inflammatory markers in patients with type 2 diabetes and the metabolic syndrome. Eighty-two patients were randomized into 4 groups: sedentary control (A); receiving counseling to perform low-intensity physical activity (B); performing prescribed and supervised high-intensity aerobic (C) or aerobic + resistance (D) exercise (with the same caloric expenditure) for 12 months. Evaluation of leisure-time physical activity and assessment of physical fitness, cardiovascular risk factors and inflammatory biomarkers was performed at baseline and every 3 months. Volume of physical activity increased and HbA1c decreased in Groups B–D. VO2max, HOMA-IR index, HDL-cholesterol, waist circumference and albuminuria improved in Groups C and D, whereas strength and flexibility improved only in Group D. Levels of hs-CRP decreased in all three exercising groups, but the reduction was significant only in Groups C and D, and particularly in Group D. Changes in VO2max and the exercise modalities were strong predictors of hs-CRP reduction, independent of body weight. Leptin, resistin and interleukin-6 decreased, whereas adiponectin increased in Groups C and D. Interleukin-1β, tumor necrosis factor-α and interferon-γ decreased, whereas anti-inflammatory interleukin-4 and 10 increased only in Group D. In conclusion, physical exercise in type 2 diabetic patients with the metabolic syndrome is associated with a significant reduction of hs-CRP and other inflammatory and insulin resistance biomarkers, independent of weight loss. Long-term high-intensity (preferably mixed) training, in addition to daytime physical activity, is required to obtain a significant anti-inflammatory effect.
Resumo:
Les zéolithes étant des matériaux cristallins microporeux ont démontré leurs potentiels et leur polyvalence dans un nombre très important d’applications. Les propriétés uniques des zéolithes ont poussé les chercheurs à leur trouver constamment de nouvelles utilités pour tirer le meilleur parti de ces matériaux extraordinaires. Modifier les caractéristiques des zéolithes classiques ou les combiner en synergie avec d’autres matériaux se trouvent être deux approches viables pour trouver encore de nouvelles applications. Dans ce travail de doctorat, ces deux approches ont été utilisées séparément, premièrement avec la modification morphologique de la ZSM-12 et deuxièmement lors de la formation des matériaux de type coeur/coquille (silice mésoporeuses@silicalite-1). La ZSM-12 est une zéolithe à haute teneur en silice qui a récemment attiré beaucoup l’attention par ses performances supérieures dans les domaines de l’adsorption et de la catalyse. Afin de synthétiser la ZSM-12 avec une pureté élevée et une morphologie contrôlée, la cristallisation de la zéolithe ZSM-12 a été étudiée en détail en fonction des différents réactifs chimiques disponibles (agent directeur de structure, types de silicium et source d’aluminium) et des paramètres réactionnels (l’alcalinité, ratio entre Na, Al et eau). Les résultats présentés dans cette étude ont montré que, contrairement à l’utilisation du structurant organique TEAOH, en utilisant un autre structurant, le MTEAOH, ainsi que le Al(o-i-Pr)3, cela a permis la formation de monocristaux ZSM-12 monodisperses dans un temps plus court. L’alcalinité et la teneur en Na jouent également des rôles déterminants lors de ces synthèses. Les structures de types coeur/coquille avec une zéolithe polycristalline silicalite-1 en tant que coquille, entourant un coeur formé par une microsphère de silice mésoporeuse (tailles de particules de 1,5, 3 et 20-45 μm) ont été synthétisés soit sous forme pure ou chargée avec des espèces hôtes métalliques. Des techniques de nucléations de la zéolithe sur le noyau ont été utilisées pour faire croitre la coquille de façon fiable et arriver à former ces matériaux. C’est la qualité des produits finaux en termes de connectivité des réseaux poreux et d’intégrité de la coquille, qui permet d’obtenir une stéréosélectivité. Ceci a été étudié en faisant varier les paramètres de synthèse, par exemple, lors de prétraitements qui comprennent ; la modification de surface, la nucléation, la calcination et le nombre d’étapes secondaires de cristallisation hydrothermale. En fonction de la taille du noyau mésoporeux et des espèces hôtes incorporées, l’efficacité de la nucléation se révèle être influencée par la technique de modification de surface choisie. En effet, les microsphères de silice mésoporeuses contenant des espèces métalliques nécessitent un traitement supplémentaire de fonctionnalisation chimique sur leur surface externe avec des précurseurs tels que le (3-aminopropyl) triéthoxysilane (APTES), plutôt que d’utiliser une modification de surface avec des polymères ioniques. Nous avons également montré que, selon la taille du noyau, de deux à quatre traitements hydrothermaux rapides sont nécessaires pour envelopper totalement le noyau sans aucune agrégation et sans dissoudre le noyau. De tels matériaux avec une enveloppe de tamis moléculaire cristallin peuvent être utilisés dans une grande variété d’applications, en particulier pour de l’adsorption et de la catalyse stéréo-sélective. Ce type de matériaux a été étudié lors d’une série d’expériences sur l’adsorption sélective du glycérol provenant de biodiesel brut avec des compositions différentes et à des températures différentes. Les résultats obtenus ont été comparés à ceux utilisant des adsorbants classiques comme par exemple du gel de sphères de silice mésoporeux, des zéolithes classiques, silicalite-1, Si-BEA et ZSM-5(H+), sous forment de cristaux, ainsi que le mélange physique de ces matériaux références, à savoir un mélange silicalite-1 et le gel de silice sphères. Bien que le gel de sphères de silice mésoporeux ait montré une capacité d’adsorption de glycérol un peu plus élevée, l’étude a révélé que les adsorbants mésoporeux ont tendance à piéger une quantité importante de molécules plus volumineuses, telles que les « fatty acid methyl ester » (FAME), dans leur vaste réseau de pores. Cependant, dans l’adsorbant à porosité hiérarchisée, la fine couche de zéolite silicalite-1 microporeuse joue un rôle de membrane empêchant la diffusion des molécules de FAME dans les mésopores composant le noyau/coeur de l’adsorbant composite, tandis que le volume des mésopores du noyau permet l’adsorption du glycérol sous forme de multicouches. Finalement, cette caractéristique du matériau coeur/coquille a sensiblement amélioré les performances en termes de rendement de purification et de capacité d’adsorption, par rapport à d’autres adsorbants classiques, y compris le gel de silice mésoporeuse et les zéolithes.
Resumo:
Introducción: En la población pediátrica los tumores cerebrales son la segunda causa de cáncer, la dificultad en su identificación produce tardanza en su diagnóstico y pocos estudios de caracterización han sido realizados en Colombia. Se realizó un estudio para identificar las características en el curso de la enfermedad. Materiales y Métodos: Estudio observacional, descriptivo, de corte transversal con pacientes pediátricos con tumores cerebrales primarios en la clínica infantil Colsubsidio entre 2007-2014. Se revisaron sistemáticamente las historias clínicas de niños con este diagnóstico en patología y posteriormente se desarrolló un análisis univariado de estos. Resultados: 56 niños fueron incluidos, encontrando que el número de consultas previas al diagnóstico fueron más de 4 con un promedio de tiempo entre la evolución de los síntomas y el diagnóstico de 161,1 días. Para la clasificación de la OMS los más frecuentes fueron los embrionarios y astrocíticos, entre estos el meduloblastoma es el más común por histología (14,29%), 50% de los pacientes presentaron remisión y 29,41% fallecieron. Discusión: Los tumores cerebrales primarios son una patología frecuente y con alta morbimortalidad. Este estudio mostró datos epidemiológicos y clínicos similares a la literatura respecto al sexo, edad, tipo de tumor y amplios rangos de tiempo en la evolución de síntomas lo que muestra la naturaleza variable de la enfermedad; se evidencia el diagnóstico tardío en pacientes reconsultantes por el mismo síntoma lo que es frecuente en estos pacientes al igual que en otros estudios nacionales.
Resumo:
ANTECEDENTES: Los desórdenes musculo esqueléticos DME son una de las alteraciones más frecuentes y una de las principales causas de ausentismo laboral en el continente americano, y Unión Europea, generando graves repercusiones económicas a nivel empresarial, de la salud pública, y del empleado. Esto es debido a una sobrecarga laboral causada por los trabajos repetitivos, posturas mantenidas, y requerimientos de fuerza muscular, por lo que se hace importante identificarlos a través de distintos métodos ergonómicos con el objeto de generar programas de prevención que permitan la mitigación de los mismos. OBJETIVO: Determinar los síntomas músculo-esqueléticos y su relación con las condiciones de trabajo de los docentes de instituciones educativas distritales de la localidad de Usme, Bogotá, D. C. MATERIALES Y METODOS: Estudio de corte transversal, efectuado en 192 docentes que se evaluaran con el cuestionario Nórdico estandarizado de síntomas musculo esqueléticos y preguntas sociodemográficas de la encuesta de condiciones de trabajo y salud (ECTS) para caracterizar la población estudio. Para el análisis estadístico se realizó distribución de frecuencias y medidas de tendencia central y dispersión. La evaluación de las posibles asociaciones se realizó mediante la prueba de chi-cuadrado de Pearson, con intervalos de confianza del 95%, la prevalencia fue ajustada por género con los intervalos de confianza. RESULTADOS: El 57,8% de los participantes era de sexo femenino, el 41,7% tenían edades entre los 30 y 39 años de edad, el 82,8% de los encuestados manejaban grupos de estudiantes que oscilan entre los 20 a 60 estudiantes, del total de los encuestados el 42,7% (IC95%: 35.9-49.5) presentan un DME ya diagnosticado por un médico o servicio de salud. El 77,1% respondieron afirmativamente a la presencia de esta variable con un IC95%: de 70,3-82,8. En cuanto a la localización del dolor, se observó que la región del cuello con el 51.6% (IC 44.3-58.9) y región lumbar con el 49% (IC95%: 42.2-56.3) fueron las dos regiones anatómicas valoradas con mayor presencia de dolor. Se encontró asociación entre la edad y el dolor (chi-cuadrado: 6,858), el sexo y dolor (chi-cuadrado: 0.250) y el número de estudiantes con el dolor (chi-cuadrado: 2,179) CONCLUSIONES: los resultados obtenidos en el presente estudio confirman la relación existente entre la presencia de desórdenes músculo-esqueléticos (DME) y la actividad docente, pero se hace pertinente la realización de más estudios que permitan valorar los DME con el riesgo psicosocial, jornada laboral y tipo de asignatura que imparten los docentes en sus cátedras para este tipo de población.
Characterization of traditional raw materials used in housing construction in Huambo Region - Angola
Resumo:
The sustainability of buildings associated to the use of raw earth has motivated the studies and the development of techniques and methods in the context of this type of construction. In the region of Huambo, Angola, these construction techniques are widely used, especially for low-income families who represent the majority of the population. Much of the buildings in Huambo province are built with adobe. Due to the climate in this region, subtropical, hot and humid, with altitudes above 1000 meters and extensive river system, these buildings are particularly vulnerable to the action of water and develop, in many situations, early degradation. The Huambo Province is located in central Angola, has 36 km2 area and approximately 2 million inhabitants. This work aims to evaluate, by conducting in-situ tests, physical and mechanical properties of adobe blocks typically used in the construction of those buildings. The methodology is based on field campaigns where in-situ expeditious tests were performed in soils (smell test, color, touch, brightness, sedimentation, ball, hardness, etc.) and tests on adobes blocks made with traditional procedures, particularly in terms of durability and erodibility (erosion test at Geelong method; evaluation test of wet / dry cycle, applying the New Zealand standards 4297: 1998; 4297: 1998 and 4297: 1999). The results will contribute to the characterization of the geomaterials and methods used in construction with earth in Huambo Province, contributing to the improvement of these sustainable solutions, with a strong presence in this region. The results of this study will also contribute to the proposal of constructive solutions with improved performance characteristics, comfort, safety and durability.
Resumo:
The Oporto's St. Lourenço Church of the Jesuit College is locally known, since the St. Augustin Barefooted Eremites occupation (1779/80), as Grilos' Church. The Oporto's siege laid by D. Pedro and D. Miguel (1832/33) succeed in the college abandonment by Grilo's Friars. Throughout Augustin Friars presence period, the white plasters of the nave (end of 18th c.) were executed and it was constructed the Holly Sacrament Chapel (early 19th c.) with neoclassic coloured stuccos and plasters, influenced by Robert Adam, Luigi Chiari and Teixeira Barreto ornamental motifs. Pigments were added to the external layer to imitate the marble and to achieve the “base” colour of the panels. This study of the blue, rose and white stuccos and plasters of H.S. Chapel of Grilo's Church allows carrying out useful database on the original mortars composition by the use of different analytical techniques, important to select the most adequate solutions for restoration interventions. Optical microscopy, XRD, TG-DTA, SEM-EDS, XRF analysis results were considered to identify the composition of different layers and to provide mineralogical, microstructure and chemical characterization of the mortars components and to quantify the binder content in those mortars. These results were compared with collected information on compositions from other sources. This study allowed the identification of the decay causes of decorative stuccos and plaster, suggesting that water retention in the masonries and wooden laths structure of the dome of the chapel is the main factor.
Resumo:
ABSTRACT. The objective of this study was to investigate the effect of different sowing dates on the yield, 100-grain weight, oil, protein and isoflavone contents of food-type soybean breeding lines UEL 110, UEL 115 and UEL 123 and a cultivar BRS 257. The materials were seeded on four sowing dates, and the experiment was conducted in a randomized block design with four replications. The productivity and 100- grain weight varied with the sowing dates and soybean genotypes. The protein content ranged from 36.40 to 42.44%, and the oil content ranged from 18.29 to 22.71%. No significant interaction was found between the genotype and sowing dates for the protein content. The isoflavone content also varied with the sowing dates and soybean genotypes. The cultivar BRS 257 had the highest isoflavone content, including the β- glucoside, malonyl glucoside and aglycones forms. The different sowing dates influenced the productivity, 100-grain weight, oil and protein content and isoflavone levels. Higher temperatures and lower rainfall during the grain filling decreased the productivity and isoflavone content and increased the protein content. For all sowing dates, the BRS 257 soybean food-type cultivar showed the highest isoflavone content, indicating that the effect of genotype is more important. Keywords: soybean, oil, protein, isoflavones. RESUMO. O objetivo deste trabalho foi investigar o efeito das diferentes épocas de semeadura na produtividade, massa de 100 grãos, teor de proteínas, óleo e isoflavonas de linhagens de soja tipo alimento UEL 110, UEL 115 e UEL 123 e cultivar BRS 257. O material foi semeado em quatro épocas de semeadura e o experimento foi conduzido em blocos casualizados com quatro repetições. A produtividade e a massa de 100 grãos variaram com a época de semeadura e com os diferentes genótipos. O teor de proteínas variou de 36,40 a 42,44% e o de óleo de 18,29 a 22,71%. Não foi encontrada interação entre genótipo e épocas de semeadura para o teor de proteínas. O teor de isoflavonas variou com as épocas de semeadura e com os genótipos. A cultivar BRS 257 apresentou maior teor de β-glicosídeos, malonil-glicosídeos e agliconas. As diferentes épocas de semeadura influenciam a produtividade, massa de 100 grãos, conteúdo de óleo, proteínas e isoflavonas. Altas temperaturas e baixas precipitações durante o enchimento dos grãos reduzem a produtividade e teor de isoflavonas e aumentam o teor de proteínas. A cultivar BRS 257 apresenta o maior teor de isoflavonas indicando que o efeito genético é mais importante.