Armazenamento refrigerado de banana 'Prata Anã' proveniente de cachos com 16, 18 e 20 semanas

Conduziu-se este trabalho, com o objetivo de verificar a influência da temperatura de refrigeração e idade do cacho sobre a conservação e qualidade pós-colheita da banana 'Prata Anã', produzida no Norte de Minas Gerais, visando a exportação. Utilizaram-se frutos de bananeira 'Prata Anã' provenientes do município de Nova Porteirinha, MG. A colheita foi realizada na 16ª, 18ª e 20ª semanas após a emissão floral. Dos cachos colhidos, utilizou-se às segundas pencas, separadas em buquês com 5 frutos, lavados e pesados (18 kg). em seguida, os frutos foram revestidos com embalagens de polietileno de baixa densidade, com 50m de espessura, sob vácuo parcial, acondicionados em caixas de papelão e distribuídos em paletes. Depois de embalados e paletizados, os frutos foram transportados para a EPAMIG/CTNM, onde foram armazenados em câmaras de refrigeração (10 e 12ºC) e umidade relativa de 95%, por um período de 35 dias, sendo analisados antes e após a refrigeração. O armazenamento de bananas 'Prata Anã', provenientes de cachos com 16, 18 e 20 semanas, por 35 dias a temperaturas de 10 e 12ºC, não promoveu chilling nos frutos. A temperatura de 10ºC foi mais eficaz em prevenir a evolução da coloração da casca de bananas provenientes de cachos com 18 semanas, que à temperatura de 12ºC, enquanto as temperaturas de 10 e 12ºC foram igualmente eficientes na contenção da mudança de cor de bananas provenientes de cachos com 16 semanas. Frutos provenientes de cachos com 20 semanas amadureceram desuniformemente, ao longo do armazenamento refrigerado.

Influência do substrato e do tipo de fertilizante na aclimatação de mudas de bananeira 'Prata-Anã'

Objetivando-se avaliar a influência do substrato e tipo de fertilizante na aclimatação de mudas de bananeira 'Prata-Anã', provenientes de micropropagação, foi instalado um experimento em blocos casualizados, no esquema fatorial 5 x 3, com quatro repetições. Os substratos utilizados foram: S1 - Terra de subsolo + casca de arroz carbonizada + substrato comercial Rendimax Floreira®; S2 - Terra de subsolo + casca de arroz carbonizada + composto orgânico Organifol®; S3 - Terra de subsolo + casca de arroz carbonizada + composto orgânico Organifol® 9% SiO; S4 - substrato comercial Technes Vivatto®; S5 - Areia grossa + casca de arroz carbonizada + Rendimax Floreira®, todos na proporção 1:1:1 (v/v/v). Os fertilizantes utilizados foram: SF - sem fertilizante; FLL - fertilizante de liberação lenta, 14-14-14 (5,0 kg m-3) misturado ao substrato; e FLN - fertilizante de liberação normal, 14-14-14 (5,0 kg m-3) aplicado em cobertura, 30 dias após o plantio. As mudas foram plantadas em sacos de polietileno quando apresentavam quatro a cinco folhas, sendo mantidas em viveiro com 50% de sombreamento. Foram feitas medidas de altura, diâmetro do colo e número de folhas, e determinada a massa seca das mudas. As diferenças químicas das misturas utilizadas como substrato, juntamente com o tipo de fertilizante utilizado, proporcionaram crescimento diferenciado das mudas. O substrato S4 pode ser utilizado sem fertilização. Os substratos S2 e S3 devem ser utilizados com fertilizante de liberação normal ou lenta de nutrientes, e S1 e S5, sendo pobres em nutrientes, com fertilizante de liberação lenta.

Ligas Acadêmicas e formação médica: contribuições e desafios

Nos últimos anos tem havido um considerável aumento do número de ligas acadêmicas atuantes nos cursos de graduação em medicina no Brasil. Esse fenômeno, no entanto, não vem sendo acompanhado de adequada reflexão sobre seus determinantes, o papel das ligas dentro das instituições, ou mesmo sua função pedagógica. A partir destas constatações, os autores analisam a precária literatura sobre o tema, descrevem a experiência das ligas acadêmicas da Faculdade de Medicina de Botucatu - Unesp e refletem a respeito do papel destas na formação médica, na tentativa de suprir um pouco dessa lacuna e contribuir para esta importante discussão.

Seleção de métodos para avaliação do cobre disponível nos solos

Fez-se um estudo de seleção de métodos para cobre disponível, empregando-se trinta solos coletados na região de Jaboticabal, SP. Os solos utilizados pertencem aos seguintes grandes grupos: Solos Podzolizados de Lins e Marília, variação Lins e variação Marília, Latossolo Vermelho-Escuro fase arenosa, Latossolo Roxo, e Terra Roxa Estruturada. O cobre dos solos foi extraído através das seguintes soluções extratoras: CaCl2 0,5 M; Mg02 2,0 N; CH3COONH4 1,0 N1 pH 6,0 e pH 4,8; HCl 0,05 N e O,1 N; H2SO4 0,05 N; DTPA 0,005 M pH 7,3 e pH 6,0; EDTA 0,01 M + (NH4)2CO3 1,0 MpH 8,6; EDTA 0,02 M + CH3C0011 0,5 M + CH3COONH4 0,5 M pH 4,65 (AAAc-EDTA); e Na2EDTA 1,0%. Foi realizado ensaio em casa de vegetação, e o milho (Zea mays L.) foi empregado como planta teste. Excluindo-se o extrator CaCl2 0,5 M, todos os demais apresentaram coeficientes de correlação entre cobre extraído do solo e o absorvido pelo milho, significativos e próximos uns dos outros. Assim, com base também em parâmetros como o coeficiente de variação, o coeficiente angular e a praticidade do método, pode-se indicar um dos seguintes extratores para a avaliação do cobre disponível dos solos: DTPA 0,005 M pH 7,3, HCl 0,1 N e Na2EDTA 1,0%.

Teores de cobre, ferro, manganês e zinco no fígado e pâncreas de caprinos semi-confinados e confinados

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

ENHANCEMENT OF U-234 IN SPRINGWATERS OF AGUAS-DA-PRATA, SAO-PAULO, BRAZIL

Springwater samples were collected at Aguas da Prata, an important spa in São Paulo State, Brazil. The U-238 and U-234 isotopes were evaluated for Platina, Paiol, Villela, Prata-Radioativa, Prata-Nova, Boi, Vitoria, and Prata-Antiga springs. An inverse logarithmic correlation was found between U-234/U-238 activity ratio and Rn-222 content of the studied waters, which was related to different solution mechanisms of Rn-222 and U-234 nuclides at the rock-water interface. A linear correlation also exists between the U-234/U-238 activity ratios of the studied waters and total dissolved solids, ionic strength, CO2 partial pressure, and index of base exchange, which indicates that the enhancement of U-234 in solution increases with the degree of weathering in the aquifers, A higher U-234/U-238 activity ratio was found to be directly related to a higher value of dissolution rate.

Biossorção de cobre, manganês e cádmio por biomassas de Saprolegnia subterranea(Dissmann) R.L. Seym. e Pythium torulosumCoker & P. Patt. (Oomycetes)

Dried biomass of the zoosporic fungi Saprolegnia subterranea and Pythium torulosum was evaluated for copper, manganese and cadmium biosorption from aqueous solutions using the "q" (mg of adsorbed metal per g of biomass) and the "R%" (percent removal) indices. The highest q values were observed when the biomass was placed in contact with high metal concentrations, whereas the highest R% values were observed at low concentrations (p< 0.05). S. subterranea SPC 1244 biomass surpassed the others for copper biosorption (q = 7.48 mg/ g; R% = 49.03), P. torulosum SPC 1425 biomass was the best for manganese biosorption (q = 4.13 mg/g; R% = 26.71), and S. subterranea SPC 1431 biomass was the best for cadmium biosorption (q = 6.75 mg/g; R% = 42.26). This is the first report on copper, manganese and cadmium biosorption by the biomass of these zoosporic fungi, indicating the potential to remove ions from diluted solutions.

Influência do escoamento estático (CREEP) na dureza do amálgama. Efeito de ligas e regióes de medida.

The authors studied the CREEP of 5 amalgam alloys (1 conventional and 4 with high cooper) by the application os static load of 36 MPa in 478 mm specimens, 7 days old. After CREEP test, the samples were included in acrylic resin and Vickers hardness determined by three penetrations for each portion (cervical, medium and occlusal). Samples not submitted to the creep test was used with control. They concluded that no statistic difference was found in creep test but in Vickers test all the studied materials showed different hardness averages. The load application to samples increased the hardness of all the studied materials.

Influência de diferentes agentes de fixação na resistência de união, por tração, de ligas metálicas fixadas à dentina.

They were casted pieces using three kinds of alloy (Ni-Cr, Ag-Sn and Cu-Al) with circular and smooth surface. They were cemented to human teeth, on occlusal surface, grounded at dentin level, through three different materials kind (zinc polycarboxylate cement, glassionomer cement and composite). After 24 hours storing, the samples were subjected to the tensile test. The results showed that the samples cemented with composite and the casts made with Ag-Sn alloy had higher bond strength.

Estudo comaprativo da resistência da união esmalt/resina/metal. Efeito de resinas de fixação, artifícios retentivos e ligas metálicas.

The purpose of this study was to compare the enamel/resin/metal bond tensile strength by using human canines, in which castings were bonded. These castings were obtained by Co-Cr or Ni-Cr alloys and showed four types of mechanisms of retention: 50 micrograms aluminum oxide abrasive, electrochemical etch, acrylic beads metal mesh. The castings were bonded utilizing Comspan Opaque and Panavia Ex. The specimens were subjected to tensile forces after 24 hours in an Instron machine. The castings subjected to 50 micrograms aluminum oxide abrasive and bonded utilizing Panavia EX showed the biggest bond tensile strength.

Fadiga de grampos de retenção em prótese parcial removível. Efeito de ligas, espessuras e técnicas de fusão. Parte I.

The authors looked for the verification of the fatigue of retentive clasps utilized on the removable partial denture. According to this, it was idealized and built on assay machine, that through movements, simulate the insertion and removal of the clasp for a pattern tooth, manufactured on cobalt-chromium which has all the preparation normally utilized to the correct confection of this type of prosthesis. It was utilized three different commercial alloys based on cobalt-chromium: L1-Biosil; L2-Steldent; L3-Duracron. It was utilized the T clasp of Roach, with was tested upon three different proportions among width and thickness: E1-1.7;E2-2.0 and E3-2.3 and was casted through two casting techniques: F1-oxygen-gas and F2-oxygen-acetylene. The clasps were tested on the machine, which allowed the reading of the number of insertion and removal cycles made until fatigue appeared. The obtained results were submitted to the statistic analysis and the authors concluded that: a) L3 (Duracrom) obtained the best results followed by L1 (Biosil) and finally L3 (Steldent); b) among the analyzed thickness, the best results were obtained by E3, followed by E2 and after this E1; c) form the casting techniques, F2 gave us the best results.

Fadiga de grampos de retenção em prótese parcial removível. Efeito de ligas, espessuras e técnicas de fusão. Parte II.

The authors tested the T clasp of Roach in three differents proportions among width and thickness: E1-1.7; E2-2.0 and E3-2.3, with a constant length of 15 mm. These clasps were casted with three cobalt-chromium alloys (L1-Biosil; L2-Steldent and L3-Duracrom), through two casting techniques (F1-oxygen-gas and F2-oxygen-acetylene). The fatigue of the clasps were verified by using and assay machine, that through movements, simulate the insertion and removal of the clasps for a pattern which were obtained from a premolar, prepared in a surveyor. This machine detect the fatigue of the clasps and count the number of cycles of insertion and removal realized. The obtained results of the interaction between the analysed factors, were submitted to the statistic analysis and the authors concluded that: a) the interaction of factors, Alloy x Thickness, Alloy x Casting Technique and Thickness x Casting Technique did not change the order of effects that the factors showed separately but gave rise to effects of different magnitude for any observed sense; b) the simultaneous interaction of the factors Alloy x Thickness x Casting Technique confirmed the superiority of the L3 alloy, the thickness E3 and the F2 casting technique.

Estudio de los procesos de corrosion de una aleacion metalica de cobre usada en odontologia

Corrosion phenomena in a dental copper-based alloy are experimentally studied using electrochemical techniques. Two heating sources, torch and induction, were used in the casting experiments. In the corrosion essays, the optimum casting cycle and the polarization curves were obtained. It was found that the heating sources have little influence on the corrosion processes of the metallic alloys studied.

Borohidreto complexos de cobre (I) contendo difosfinas. Caracterização espectroscópica e comportamento térmico

Tetrahydroborate complexes of copper (I) with bidentate phosphines, [Cu(η 2-BH 4)(dppm)] (1), [Cu(η 2-BH 4)(dppe)] (2), [Cu(η 2-BH 4)(cis-dppet)] (3) and [Cu(η 2-BH 4)(dppb)] (4) (dppm = bis(diphenylphosphino)methane; dppe = 1,2-bis(diphenylphosphino) ethane; cis-dppet = 1,2-cis(diphenylphosphino)ethene; dppb = 1,4-bis(diphenylphosphino)butane) were prepared and characterized by elemental analysis, infrared spectroscopy, NMR and thermogravimetric analysis. The IR data for 1-4 showed bands typical of a bidentate coordination of BH 4 group to the copper atom and the 31P{ 1H} NMR spectra indicated that the phosphorous atoms are chelating the metal centre. The thermal behavior of the compounds was investigated and suggested that their thermal stability is influenced by the phosphines. Their thermal stability decreased as follows: [Cu(η 2-BH 4)(dppe)] (2) > [Cu(η 2-BH 4)(dppm)] (1) > [Cu(η 2-BH 4)(dppb)] (4) > [Cu(η 2-BH 4)(cis-dppet)] (3). According to thermal analysis and X-ray diffraction patterns all compounds decomposed giving Cu(BO 2) 2, CuO, CuO 2 and Cu as final products.

Alterações hematológicas e histopatológicas em pacu, Piaractus mesopotamicus Holmberg, 1887 (Osteichthyes, Characidae), tratado com sulfato de cobre (CuSo4)

This paper evaluated the haematological and glycaemic parameters in Piaractus mesopotamicus (Osteichthyes, Characidae) infected with Monogenea Anacanthorus penilabiatus Boeger, Husak & Martins, 1995 (Dactylogyridae) after treatment with 0.50 mg/L and 1.00 mg/L of copper sulphate (CuSO4). The efficacy of the CuSO4 was observed in the first day after administration but not after eight, fifteen or thirty days. The histopathological analyses showed hyperplasia of the epithelium and circulatory changes in the gills. In the first day after treatment significant changes (P<0.05) in the total count of erythrocyte, leucocyte, mean corpuscular haemoglobin concentration (MCHC) were observed. The fishes treated with 0.50 mg/L showed decrease in the haemoglobin levels and in the percentage of neutrophils (P<0.05). The dose of 1.00 mg/L provoked increase of glycaemia but reduction in the lymphocytes percentage when compared with 0.50 mg/L in the 8th day. Fifteen days after 1.00 mg/L treatment, values of mean corpuscular volume (MCV) and special granulocitic cells (S.G.C.) percentage decreased. Nevertheless, increase of total leucocyte number was observed. Thirty days after treatment with 0.50 mg/L showed increased S.G.C. and treatment with 1.00 mg/L showed increased lymphocyte.