Validation of plant dynamic model by online and laboratory measurements – a tool to predict online COD loads out of production of mechanical printing papers

COD discharges out of processes have increased in line with elevating brightness demands for mechanical pulp and papers. The share of lignin-like substances in COD discharges is on average 75%. In this thesis, a plant dynamic model was created and validated as a means to predict COD loading and discharges out of a mill. The assays were carried out in one paper mill integrate producing mechanical printing papers. The objective in the modeling of plant dynamics was to predict day averages of COD load and discharges out of mills. This means that online data, like 1) the level of large storage towers of pulp and white water 2) pulp dosages, 3) production rates and 4) internal white water flows and discharges were used to create transients into the balances of solids and white water, referred to as “plant dynamics”. A conversion coefficient was verified between TOC and COD. The conversion coefficient was used for predicting the flows from TOC to COD to the waste water treatment plant. The COD load was modeled with similar uncertainty as in reference TOC sampling. The water balance of waste water treatment was validated by the reference concentration of COD. The difference of COD predictions against references was within the same deviation of TOC-predictions. The modeled yield losses and retention values of TOC in pulping and bleaching processes and the modeled fixing of colloidal TOC to solids between the pulping plant and the aeration basin in the waste water treatment plant were similar to references presented in literature. The valid water balances of the waste water treatment plant and the reduction model of lignin-like substances produced a valid prediction of COD discharges out of the mill. A 30% increase in the release of lignin-like substances in the form of production problems was observed in pulping and bleaching processes. The same increase was observed in COD discharges out of waste water treatment. In the prediction of annual COD discharge, it was noticed that the reduction of lignin has a wide deviation from year to year and from one mill to another. This made it difficult to compare the parameters of COD discharges validated in plant dynamic simulation with another mill producing mechanical printing papers. However, a trend of moving from unbleached towards high-brightness TMP in COD discharges was valid.

Hidrogenofosfato de titânio lamelar: síntese, troca iônica e intercalação

The development associated with the research field involving crystalline inorganic lamellar titanium hydrogenphosphate, Ti(HPO4).H2O, synthesized as alpha or gamma forms, is directly linked to the huge number of reactions, that occur inside the free interlamellar space. Two distinguishable well-characterized features such as ion-exchange and intercalation reactions are explored here. From the interactive point of view, the acidic OH centres distributed on the lamella can interact with cations or with basic polar molecules to exchange or to intercalate them. These chemical reactions are normally followed by an expansion of the interlamellar space, proportional to the amount intercalated, reflecting in ion radii or organic molecule size lengths used in ion-exchange or insertion processes, respectively. The effectiveness of the exchange increased when the original matrix has the proton of OH group previously ion-exchanged by an alkaline or an alkylammonium cations. Monoalkyl-, dialkyl- and heterocyclic amines are focused in this revision as clear and elucidative examples of acid-base interactive processes, that come out inside of the well-formed infinite sequence of inorganic lamellar structure.

Toimittajasuhteiden kehittaminen Etela-Karjalan julkisissa terveydenhuollon hankinnoissa

Työn tavoite oli selvittää miten Etelä-Karjalan sairaanhoitopiirissä hoidetaan talla hetkellä toimittajasuhteita ja miten nykyiset hankintoihin liittyvät toimintatavat toimivat. Lisaksi tavoitteena oli selvittää miten toimittajasuhteiden hoito voidaan tehdä jatkossa sekä miten yleensä hankintojen toimintatapoja on kehitettävä, jotta pystytään vastaamaan uuden Etelä- Karjalan Sosiaali- ja terveyspiirin tuomiin organisaatiomuutoksiin. Tutkimuksessa ilmeni, että sairaanhoitopiirin kulutustavaroiden toimittajista murto-osa vastaa suurimmasta osasta toimituksista ja toimitusten euromääräisestä arvosta. Hankintojen onnistunut toteuttaminen jatkossa vaatii parempaa informaationkulkua hankintatoimen ja toimittajien välillä sekä sairaalan sisällä. Hankintatoimen toimintatavoista on tehtävä selkeämmät pelisäännöt, joiden toteutumisen valvomiseen on panostettava.

Sähköurakoitsijan langattoman mobiiliratkaisun sunnittelu ja toteuttaminen

Kandidaatintyön tavoitteena on suunnitella ja toteuttaa tehokkaampi ajanhallintajärjestelmä sähköalan yritykseen. Ajanhallinnan tehostaminen oli tarkoitus saavuttaa siirtämällä työtuntien seuranta paperilomakkeiden käytöstä sähköiseen tietokantaan johon syötetään tiedot langattomilla päätelaitteilla. Päätelaitteiksi valittiin kämmentietokoneet jotka käyttävät tiedonsiirtoon langatonta lähiverkkoa ja yrityksen ulkopuolella GSMkännykkäverkon datasiirto-ominaisuuksia. Ohjelmisto koottiin useista eri sovelluskomponenteista Groupware-ohjelmistopaketin käyttämisen sijaan. Useiden eri sovellusten käyttö osoittautui virheeksi koska näiden erilaiset käyttöliittymät ja vaihtelevat ominaisuudet hankaloittivat käyttöä. Työn tehokkuutta mitattaessa havaittiin että järjestelmän käyttöönotto oli lisännyt ajanhallintaan liittyvien tehtävien pituutta eikä tehostanut niitä. Tämä johtuu osittain useiden eri sovellusten käytöstä ja niiden ominaisuuksien puutteista.

Resurssien ja kyvykkyyksien vastaavuus alan muuttuviin vaatimuksiin

Tämän diplomityön tavoitteena on tutkia kohdeyrityksen strategista muutosta perinteisestä tuotetoimittajasta ratkaisujen toimittajaksi. Toimialan muutosta arvioidaan tarkemmin, jotta voidaan selvittää kuinka yrityksen tulisi mukauttaa resurssejaan ja kyvykkyyksiään sopeutuakseen muutoksen tuomiin uusiin haasteisiin. Tarkastelun alla on erityisesti yrityksen strateginen muutos ja kuinka löytää strategian kannalta ne dynaamiset kyvykkyydet joiden avulla yritys saa pysyvää kilpailuetua. Yritykset pyrkivät strategisessa suunnittelussaan pysyvään kilpailuetuun. Strategista johtamisen teorioita on esitetty useita ja niiden kautta on vaikea selittää nykyisin nopeasti muuttuvassa toimintaympäristössä toimivien yritysten menestystä. Dynaamisten kyvykkyyksistä on haettu selitystä menestyksen taakse. Yritysten tavoitellessa kokonaan uusia liiketoiminta-alueita niihin kohdistuu suuria muutoksia niin ulkoisesti kuin sisäisestikin. Tällöin on kriittistä tunnistaa ne ydinkyvykkyydet joiden avulla voidaan menestyä uusilla liiketoiminta-alueilla. Työn ensimmäisessä osassa esitetään strategiaan ja kyvykkyyksiin liittyviä teorioita. Teoriaosiossa tarkastellaan myös palveluyritykseksi muuntautumisen haasteita, jonka jälkeen esitellään kohdeyrityksen strategiset tavoitteet ja kuinka puuttuvia resursseja voidaan tunnistaa. Resurssipohjaisen lähestymistavan avulla päästiin hyvin käsiksi toimialan muutoksen aiheuttamiin puuttuviin resursseihin. Analyysin aikana tunnistettiin puutteita tavoitteisiin nähden ja tässä työssä nousi yhtenä keskeisimpänä esille ICT-osaaminen kohdeyrityksen siirtyessä laitevalmistajan roolista kohti ratkaisun toimittajaa. Tutkimuksen perusteella voidaan todeta, että resurssipohjaisen lähestymistavan avulla voidaan tunnistaa tämän tyyppisessä yrityksessä resurssipuutteita joita kehittämällä yritys voi saavuttaa pysyvää kilpailuetua.

Heat Transfer in Plate Heat Exchangers

This study illustrates the different types of plate heat exchangers that are commonly used in various domestic and industrial applications. The main purpose of this paper was to devise a methodology that is capable of calculating optimum number of plates in the design of a plate heat exchanger. To obtain the appropriate number of plates, typically several iterations must be made before a final acceptable design is completed, since plate amount depends on many factors such as, flow velocities, physical properties of the streams, flow channel geometry, allowable pressure drop, plate dimensions, and the gap between the plates. The methodology presented here can be used as a general guide for designing a plate heat exchanger. To investigate the effects of relevant parameters on the thermal-hydraulic design of a plate heat exchanger, several experiments were carried out for single-phase and counter flow arrangement with two brazed plate heat exchangers by varying the flow rates and the inlet temperatures of the fluid streams. The actual heat transfer coefficients obtained based on the experiment were nearly close to the calculated values and to improve the design, a correction factor was introduced. Besides, the effect of flow channel velocity on the pressure drop inside the unit is presented.

Experimentos didáticos envolvendo radiação microondas

Theoretical and practical aspects of the use of microwave-assisted strategies in chemistry are introduced for students using simple and safe experiments employing a domestic oven. Three procedures are proposed for evaluating the distribution of microwave radiation inside the microwave oven cavity: (1) variation of the volume of marshmallows; (2) drying of filter paper wetted with Co(II) solution, and (3) variation of water temperature, after microwave-assisted heating. These experiments establish the position with the highest incidence of microwave radiation in the oven cavity, which was chosen for the synthesis of salicylic acid acetate. This synthesis was performed in 5 min of heating and the yield was around 85%. All experiments can be carried out in a 4 h lab-session using low-cost instrumentation.

Researching on and with Young People: Collaborating and Educating. Investigar con y sobre los jóvenes colaborando y educando

This paper reports on collaborative research on and with young people. In this study five groups of students in the final year of their Compulsory Secondary Education (CSE) from five different schools developed five ethnographic studies about how they communicate, express themselves and learn inside and outside school, with the support and collaboration of teachers and members of our research group. The paper begins by discussing the dimensions of collaboration in education, taking into account the contribution of collaborative and ooperative learning, and the potential of digital resources, situating earlier influences and characterizing the work realised. Then there is a description of the research carried out on and with the young people we invited to perform as investigators. The results focus on the description and conceptualization of the different types of collaboration that have emerged while carrying out the ethnographic studies in each of the schools using digital technologies. Finally, we discuss the implications and limitations of the work as a contribution to anyone interested in researching on and with young people, collaborating, educating and using digital resources.

Construção de amostrador passivo de baixo custo para determinação de dióxido de nitrogênio

A new passive sampling system for monitoring NO2 in air has been developed to measure gas concentrations in indoor and outdoor air. The sampler is inexpensive, and easy to construct and operate. Nitrogen dioxide forms a derivative after reaction with a filter coated with triethanolamine and ethyleneglycol. The nitrogen dioxide derivative is extracted from the filter, and the concentration is determined by colorimetry. To test the sampler for measuring ambient level nitrogen dioxide, measurements were carried out inside homes and in a range of workplace environments.

Most of the Abundant Protein Fractions of Embryonic Cerebrospinal Fluid are Produced Out of the Brain Anlagen

The microenvironment of the central nervous system is important for neuronal function and development. During the early stages of embryo development the cephalic vesicles are filled by embryonic cerebrospinal fluid, a complex fluid containing different protein fractions, which contributes to the regulation of the survival, proliferation and neurogenesis of neuroectodermal stem cells. The protein content of embryonic cerebrospinal fluid from chick and rat embryos at the start of neurogenesis has already been determined. Most of the identified gene products are thought to be involved in the regulation of developmental processes during embryogenesis. However, due to the crucial roles played by embryonic cerebrospinal fluid during brain development, the embryological origin of the gene products it contains remains an intriguing question. According to the literature most of these products are synthesised in embryonic tissues other than the neuroepithelium. In this study we examined the embryological origin of the most abundant embryonic cerebrospinal fluid protein fractions by means of slot-blot analysis and by using several different embryonic and extraembryonic protein extracts, immunodetected with polyclonal antibodies. This first attempt to elucidate their origin is not based on the proteins identified by proteomic methods, but rather on crude protein fractions detected by SDS-PAGE analysis and to which polyclonal antibodies were specifically generated. Despite some of the limitations of this study, i.e. that one protein fraction may contain more than one gene product, and that a specific gene product may be contained in different protein fractions depending on post-translational modifications, our results show that most of the analysed protein fractions are not produced by the cephalic neuroectoderm but are rather stored in the egg reservoir; furthermore, few are produced by embryo tissues, thus indicating that they must be transported from their production or storage sites to the cephalic cavities, most probably via embryonic serum. These results raise the question as to whether the transfer of proteins from these two embryo compartments is regulated at this early developmental stage.

Kemikaalisekoituksen vaikutus kartongin liimausasteen pienimittakaavaiseen vaihteluun

Tässä diplomityössä tutkittiin massaliimauksen stabiilisuutta kartonkikoneella ja himan sekoituskonseptin muuttamisen vaikutusta liimausasteeseen ja liimausasteen pienimittakaavaiseen vaihteluun konerullan sisällä. Koeajoista saadut tulokset olivat erittäin lupaavia. Koeajoissa annosteltiin hartsia kahdella eri TrumpJet™-installaatiolla. Ensimmäisessä koeajossa hartsi sekoitettiin kaikkiin kolmeen kerrokseen sakean massan syöttölinjaan, ennen pyörrepuhdistuksen vaatimaa laimennusta. Toisessa koeajossa hartsi annosteltiin kolmella TrumpJet-suuttimella kartongin pintakerrokseen konesihdin jälkeen ja muihin kerroksiin perinteisesti sekoitussäiliön. Tuloksista nähtiin, että hartsin syöttö perälaatikon lähestymisvirtaukseen on mahdollista kartongin laadun ja liimausasteen siitä karsimatta. Liimausaste määritettiin Stora Enson spesifisen REP-menetelmän (raw edge penetration) avulla. Koesarjojen välille ei syntynyt merkittäviä eroja reunaimeytymätasoihin, eikä koesarjojen sisäisiin vaihteluihin verrattaessa referensikonerulliin.

Optimal latent period in a bacteriophage population model structured by infection-age

We study the lysis timing of a bacteriophage population by means of a continuously infection-age-structured population dynamics model. The features of the model are the infection process of bacteria, the death process, and the lysis process which means the replication of bacteriophage viruses inside bacteria and the destruction of them. The time till lysis (or latent period) is assumed to have an arbitrary distribution. We have carried out an optimization procedure, and we have found that the latent period corresponding to maximal fitness (i.e. maximal growth rate of the bacteriophage population) is of fixed length. We also study the dependence of the optimal latent period on the amount of susceptible bacteria and the number of virions released by a single infection. Finally, the evolutionarily stable strategy of the latent period is also determined as a fixed period taking into account that super-infections are not considered

Phase diagram and complex patterns in the modeling of the bromate-oxalic acid-Ce-acetone oscillating reaction

Simulations have been carried out on the bromate - oxalic acid - Ce(IV) - acetone oscillating reaction, under flow conditions, using Field and Boyd's model (J. Phys. Chem. 1985, 89, 3707). Many different complex dynamic behaviors were found, including simple periodic oscillations, complex periodic oscillations, quasiperiodicity and chaos. Some of these complex oscillations can be understood as belonging to a Farey sequence. The many different behaviors were systematized in a phase diagram which shows that some regions of complex patterns were nested with one inside the other. The existence of almost all known dynamic behavior for this system allows the suggestion that it can be used as a model for some very complex phenomena that occur in biological systems.

Entorn de gestió de dades d'ornitologia

Des de fa uns anys, des de l’EPS de la UVic, s’està duent a terme el desenvolupament d’un dispositiu electrònic que proporciona la capacitat de capturar dades sobre un niu d’ocells. El projecte e-niu, que es pot seguir a www.tutara.info/e-niu, està actualment en una fase de test., i s’ha desenvolupat sobretot la part hardware. Aquest projecte té com a objectiu principal crear un entorn web per poder gestionar les dades que s’obtenen del niu d’ocells informatitzat (e-niu). Les dades que ens arriben dels e-nius estan en un arxiu de text, i el que es pretén és que l’usuari que controla el niu, pugui fer diversos anàlisis de les dades d’aquest. A més de poder veure els resultats en diversos tipus de gràfics, també se li vol donar la opció de treure els resultats en format taula o en format Excel, un format aquest últim, molt interessant, ja que donaria a les dades una gran possibilitat de ser tractades posteriorment, com fer seleccions del tipus de dades, treure percentatges, crear altres tipus de gràfics, etc. L’altre gran objectiu és el fet de poder treballar en la creació d’un entorn web complert a nivell gairebé professional amb l’aprenentatge que això comporta, ja que s’ha aplicat la tecnologia client-servidor, és a dir, que el llenguatge de programació està dins el servidor, i quan algun usuari l’executa, el sistema només li envia la presentació en HTML. El sistema de programació que es fa servir és el de les tres capes. La capa de dades, que està formada per una base de dades relacional del tipus MySQL i és on emmagatzemarem tota la informació. La capa de programació de la que s’encarrega el llenguatge PHP, és on s’efectua tot el tractament de les dades i finalment, la capa de presentació, que és la que s’encarrega de mostrar les dades al client en el navegador mitjançant els templates de HTML.

Les captacions d'aigua destinada al consum humà al Principat d'Andorra: Anàlisi del marc jurídic actual, definició del procediment d'autorització i sistema d'informació geogràfic sobre les captacions i els perímetres de protecció associats

RESUM L’aigua és un recurs limitat necessari per a l’establiment de qualsevol forma de vida sobre la Terra. Aquest recurs, es veu regit pel cicle hidrològic i durant les diferents fases del seu cicle, l’aigua pot ser captada per ser aprofitada per l’ésser humà. En els darrers anys, la necessitat d’aigua per a la població ha estat incrementada provocant un impacte negatiu sobre aquest recurs. Per aquest motiu sorgeix la necessitat de crear polítiques globals per protegir l’aigua que vagin encaminades a minimitzar l’efecte negatiu provocat per l’home. Tota captació d’aigua destinada al consum humà ha de garantir uns paràmetres de qualitat i per tal de poder aconseguir aquest objectiu amb eficàcia és imprescindible l’aplicació d’una eina legal molt important: els perímetres de protecció. A l’article 6 de la Llei de policia i protecció de les aigües del 31 de juliol del 1985, s’estableix que tota captació d’aigua potable haurà de quedar aïllada mitjançant un perímetre de protecció, a l’interior del qual no podrà dur-se a terme cap activitat sense prèvia autorització de Govern. Els objectius principals d’aquest estudi son recopilar la informació existent en referència a les captacions d’aigua i els seus respectius perímetres de protecció, elaborar una base de dades que pugui contenir tota la informació existent i elaborar cartografia especifica amb la finalitat de realitzar una diagnosi de la situació actual de les captacions i perímetres associats i identificar els principals riscos potencials existents en aquestes àrees. Entre les conclusions mes rellevants obtingudes amb aquest treball, cal destacar que s’ha constatat que algunes activitats antròpiques potencialment contaminants es troben situades en zones properes a les captacions destinades a consum humà, inclòs dins dels seus perímetres de protecció, amb el conseqüent risc que aquesta situació comporta.