Computational simulation of the flow-induced vibration of a circular cylinder subjected to wake interference

In this work, we considered the flow around two circular cylinders of equal diameter placed in tandem with respect to the incident uniform flow. The upstream cylinder was fixed and the downstream cylinder was completely free to move in the cross-stream direction, with no spring or damper attached to it. The centre-to-centre distance between the cylinders was four diameters, and the Reynolds number was varied from 100 to 645. We performed two- and three-dimensional simulations of this flow using a Spectral/hp element method to discretise the flow equations, coupled to a simple Newmark integration routine that solves the equation of the dynamics of the cylinder. The differences of the behaviours observed in the two- and three-dimensional simulations are highlighted and the data is analysed under the light of previously published experimental results obtained for higher Reynolds numbers.

Altered phenotype and function of dendritic cells in individuals with chronic periodontitis

OBJECTIVE: To investigate the effects of periodontal bacterial lysates on maturation and function of mature monocyte-derived dendritic cells (m-MDDCs) derived from individuals with chronic periodontitis (CP) or healthy periodontal tissue (HP). DESIGN: m-MDDCs derived from peripheral blood monocytes, cultured for 7 days in presence of interleukin (IL)-4 and granulocyte-macrophage colony stimulating factor (GM-CSF), were stimulated with lysates of Streptococcus sanguinis, Prevotella intermedia, Porphyromonas gingivalis, or Treponema denticola on day 4, and were then phenotyped. IL-10, IL-12 and IFN-gamma concentration in the supernatant of cultures were measured. RESULTS: Expression of HLA-DR was lower in bacterial-unstimulated mature m-MDDC from CP compared to HP (p=0.04), while expression of CD1a and CD123 were higher in CP. The expression pattern of HLA-DR, CD11c, CD123, and CD1a did not change on bacterial stimulation, regardless of the bacteria. Stimulation with P. intermedia upregulated CD80 and CD86 in CP cells (p≤0.05). Production of IL-12p70 by bacterial-unstimulated m-MDDCs was 5.8-fold greater in CP compared to HP. Bacterial stimulation further increased IL-12p70 production while decreasing IL-10. Significantly more IFN-gamma was produced in co-cultures of CP m-MDDCs than with HP m-MDDCs when cells were stimulated with P. intermedia (p=0.009). CONCLUSIONS: Bacterial-unstimulated m-MDDC from CP exhibited a more immature phenotype but a cytokine profile biased towards proinflammatory response; this pattern was maintained/exacerbated after bacterial stimulation. P. intermedia upregulated co-stimulatory molecules and IFN-gamma expression in CP m-MDDC. These events might contribute to periodontitis pathogenesis

Spark Plasma Sintering of Si3N4-based Ceramics : Sintering mechanism-Tailoring microstructure-Evaluationg properties

Spark Plasma Sintering (SPS) is a promising rapid consolidation technique that allows a better understanding and manipulating of sintering kinetics and therefore makes it possible to obtain Si3N4-based ceramics with tailored microstructures, consisting of grains with either equiaxed or elongated morphology. The presence of an extra liquid phase is necessary for forming tough interlocking microstructures in Yb/Y-stabilised α-sialon by HP. The liquid is introduced by a new method, namely by increasing the O/N ratio in the general formula RExSi12-(3x+n)Al3x+nOnN16-n while keeping the cation ratios of RE, Si and Al constant. Monophasic α-sialon ceramics with tailored microstructures, consisting of either fine equiaxed or elongated grains, have been obtained by using SPS, whether or not such an extra liquid phase is involved. The three processes, namely densification, phase transformation and grain growth, which usually occur simultaneously during conventional HP consolidation of Si3N4-based ceramics, have been precisely followed and separately investigated in the SPS process. The enhanced densification is attributed to the non-equilibrium nature of the liquid phase formed during heating. The dominating mechanism during densification is the enhanced grain boundary sliding accompanied by diffusion- and/or reaction-controlled processes. The rapid grain growth is ascribed to a dynamic ripening mechanism based on the formation of a liquid phase that is grossly out of equilibrium, which in turn generates an extra chemical driving force for mass transfer. Monophasic α-sialon ceramics with interlocking microstructures exhibit improved damage tolerance. Y/Yb- stabilised monophasic α-sialon ceramics containing approximately 3 vol% liquid with refined interlocking microstructures have excellent thermal-shock resistance, comparable to the best β-sialon ceramics with 20 vol% additional liquid phase prepared by HP. The obtained sialon ceramics with fine-grained microstructure show formidably improved superplasticity in the presence of an electric field. The compressive strain rate reaches the order of 10-2 s-1 at temperatures above 1500oC, that is, two orders of magnitude higher than that has been realised so far by any other conventional approaches. The high deformation rate recorded in this work opens up possibilities for making ceramic components with complex shapes through super-plastic forming.

Modellazione e simulazione di sistemi meccanici ad elevato numero di gradi di libertà mediante metodi non convenzionali e sistemi CAD

Recent developments in piston engine technology have increased performance in a very significant way. Diesel turbocharged/turbo compound engines, fuelled by jet fuels, have great performances. The focal point of this thesis is the transformation of the FIAT 1900 jtd diesel common rail engine for the installation on general aviation aircrafts like the CESSNA 172. All considerations about the diesel engine are supported by the studies that have taken place in the laboratories of the II Faculty of Engineering in Forlì. This work, mostly experimental, concerns the transformation of the automotive FIAT 1900 jtd – 4 cylinders – turbocharged – diesel common rail into an aircraft engine. The design philosophy of the aluminium alloy basement of the spark ignition engine have been transferred to the diesel version while the pistons and the head of the FIAT 1900 jtd are kept in the aircraft engine. Different solutions have been examined in this work. A first V 90° cylinders version that can develop up to 300 CV and whose weight is 30 kg, without auxiliaries and turbocharging group. The second version is a development of e original version of the diesel 1900 cc engine with an optimized crankshaft, that employ a special steel, 300M, and that is verified for the aircraft requirements. Another version with an augmented stroke and with a total displacement of 2500 cc has been examined; the result is a 30% engine heavier. The last version proposed is a 1600 cc diesel engine that work at 5000 rpm, with a reduced stroke and capable of more than 200 CV; it was inspired to the Yamaha R1 motorcycle engine. The diesel aircraft engine design keeps the bore of 82 mm, while the stroke is reduced to 64.6 mm, so the engine size is reduced along with weight. The basement weight, in GD AlSi 9 MgMn alloy, is 8,5 kg. Crankshaft, rods and accessories have been redesigned to comply to aircraft standards. The result is that the overall size is increased of only the 8% when referred to the Yamaha engine spark ignition version, while the basement weight increases of 53 %, even if the bore of the diesel version is 11% lager. The original FIAT 1900 jtd piston has been slightly modified with the combustion chamber reworked to the compression ratio of 15:1. The material adopted for the piston is the aluminium alloy A390.0-T5 commonly used in the automotive field. The piston weight is 0,5 kg for the diesel engine. The crankshaft is verified to torsional vibrations according to the Lloyd register of shipping requirements. The 300M special steel crankshaft total weight is of 14,5 kg. The result reached is a very small and light engine that may be certified for general aviation: the engine weight, without the supercharger, air inlet assembly, auxiliary generators and high pressure body, is 44,7 kg and the total engine weight, with enlightened HP pump body and the titanium alloy turbocharger is less than 100 kg, the total displacement is 1365 cm3 and the estimated output power is 220 CV. The direct conversion of automotive piston engine to aircrafts pays too huge weight penalties. In fact the main aircraft requirement is to optimize the power to weight ratio in order to obtain compact and fast engines for aeronautical use: this 1600 common rail diesel engine version demonstrates that these results can be reached.

Metrologia dei campi di radiazioni di bassa energia

The conversion coefficients from air kerma to ICRU operational dose equivalent quantities for ENEA’s realization of the X-radiation qualities L10-L35 of the ISO “Low Air Kerma rate” series (L), N10-N40 of the ISO “Narrow spectrum” series (N) and H10-H60 of the ISO “High Air-kerma rate” (H) series and two beams at 5 kV and 7.5 kV were determined by utilising X-ray spectrum measurements. The pulse-height spectra were measured using a planar high-purity germanium spectrometer (HPGe) and unfolded to fluence spectra using a stripping procedure then validate with using Monte Carlo generated data of the spectrometer response. HPGe portable detector has a diameter of 8.5 mm and a thickness of 5 mm. The entrance window of the crystal is collimated by a 0.5 mm thick Aluminum ring to an open diameter of 6.5 mm. The crystal is mounted at a distance of 5 mm from the Berillium window (thickness 25.4 micron). The Monte Carlo method (MCNP-4C) was used to calculate the efficiency, escape and Compton curves of a planar high-purity germanium detector (HPGe) in the 5-60 keV energy. These curves were used for the determination of photon spectra produced by the X-ray machine SEIFERT ISOVOLT 160 kV in order to allow a precise characterization of photon beams in the low energy range, according to the ISO 4037. The detector was modelled with the MCNP computer code and validated with experimental data. To verify the measuring and the stripping procedure, the first and the second half-value layers and the air kerma rate were calculated from the counts spectra and compared with the values measured using an a free-air ionization chamber. For each radiation quality, the spectrum was characterized by the parameters given in ISO 4037-1. The conversion coefficients from the air kerma to the ICRU operational quantities Hp(10), Hp(0.07), H’(0.07) and H*(10) were calculated using monoenergetic conversion coefficients. The results are discussed with respect to ISO 4037-4, and compared with published results for low-energy X-ray spectra. The main motivation for this work was the lack of a treatment of the low photon energy region (from a few keV up to about 60 keV).

Evaluación de las proteínas de fase aguda en perros infectados por "Dirofilaria immitis"

Programa de doctorado: Clínica e investigación terapéutica

Vorkommen und Charakterisierung von Ecdysiotropinen bei männlichen Imagines der Mittelmeerfeldgrille Gryllus bimaculatus de Geer

Das Vorkommen von Häutungshormonen in adulten Insekten, insbesondere solcher, die eine lange Imaginalphase durchlaufen, wirft die Frage nach der Regulation der Ecdysteroidsynthese außerhalb der Prothorakaldrüse auf. Unter diesem Gesichtspunkt kann Gryllus bimaculatus mit einem ausgesprochen langen Adultstadium und rapiden zeitlichen Veränderungen des Ecdysontiters als ein geeignetes Versuchsobjekt angesehen werden.Der vorliegenden Dissertation liegt die Arbeitshypothese zugrunde, daß die Ecdysteroid-Synthese bzw. Sekretion von Adultgeweben in männlichen Imagines der Mittelmeerfeldgrille durch Neuropeptide hormonell reguliert wird. Als Quelle für die Ecdysteroidsynthese wurde auf Grund immunohistochemischer Befunde sowie der Ergebnisse von Sekretionsprofil-Analysen unter anderem die Oenocyten in Betracht gezogen.Zur Überprüfung dieser Hypothese wurde ein in vitro Bioassay entwickelt, der es ermöglichte, die Wirkung von extrahierten Substanzen auf die Hormonsynthese mittels RIA/HPLC zu bestimmen. Aus Köpfen adulter G. bimaculatus ließen sich durch HP-SEC Faktoren isolieren, die die Ecdysteroidsekretion in Oenocyten und Tergiten stimulierten, die aber keinen Einfluß auf die Hormonsekretion von Fettgewebe sowie der Prothorakaldrüsen hatten. Die Wirkung des aufgereinigten Extraktes in Oenocyten war zeit- und dosis-abhängig. Die ecdysiotropen Faktoren besaßen ein Molekulargewicht zwischen 26,5 und 30 kDa. Die Größe der Molmasse der ecdysiotropen Faktoren entsprach somit bei adulten männlichen Grillen etwa dem des Neurohormons PTTH bei Lepidopteren. Dennoch zeigten Antikörper, die gegen PTTH von Bombyx mori gerichtet waren im Western-Blot keine Bindung an Gryllus bimaculatus Kopfextrakte. Die Sekretionsprodukte von Oenocyten, die mit Ecdysiotropinen behandelt waren, wurden durch RP- und NP-HPLC identifiziert. Es konnten zwei zusätzliche Peaks neben einem deutlichen Anstieg von 20-Hydroxyecdyson nachgewiesen werden. Auf Grund identischer Retentionszeiten mit Referenzsubstanzen handelt es sich bei einem Peak vermutlich um Makisteron A.Obwohl die Applikation von Azadirachtin in G. bimaculatus zu einer Senkung des Hämolymph-Ecdysteroidgehalts führte, konnte keine Anreicherung von Ecdysiotropinen erzielt werden.Die die Ecdysteroidsekretion-beeinflussenden Faktoren waren resistent gegen Kochen und Alkylierung aber nicht stabil gegen Reduzierung durch DTT und Behandlung mit Neuramidase. Damit konnte gezeigt werden, daß das Vorhandensein von Disulfidbrücken und Oligosaccharidketten für die biologische Aktivität notwendig ist.Die Aminosäuresequenz-Analyse und der enzymatische Verdau der stimulierenden Faktoren durch Exopeptidasen wiesen auf geschützte N- und C-Termini hin. Ferner wurden einige interne Peptidfragmente von fünf Proteinbanden sequenziert, die keine Homologie zu bereits bekannten regulatorischen Neuropeptiden zeigten. Als einziges bekanntes Protein aus diesem Bereich konnte das „14-3-3-like Protein“ mit Hilfe MALDI-MS identifiziert werden.Die Stimulierung der Ecdysteroidsekretion in Oenocyten von G. bimaculatus durch Oenocyten-stimulierende Faktoren (OSF) aus Kopfextrakten konnte mittels Signalstoff-Effektoren in vitro nachgeahmt werden. Außerdem wurde mit Hilfe eines RRA nachgewiesen, daß der intrazelluläre cAMP-Spiegel von Oenocyten durch OSF erhöht wird. Daraus kann geschlossen werden, daß cAMP als „Second Messenger“ an der Wirkung der OSF beteiligt ist. Calcium-Ionen schienen für die Ecdysteroidsekretion notwendig zu sein. Allerdings führte eine artifizielle Erhöhung der intrazellulären Calcium-Konzentration durch das Ionophor Ionomycin zu einer Hemmung der Sekretion. Schließlich wird ein Modell zur Erklärung des Wirkmechanismus von OSF in Gryllus bimaculatus postuliert und diskutiert.

Metodi biochimici e biomolecolari applicati alla medicina clinica: rendimento della real-time TaqMan PCR per la valutazione della resistenza alla claritromicina in H.pylori e tests fecali nella diagnorstica del carcinoma colo-rettale: M2PK, calprotectina e FOBT

1) Background: The most common methods to evaluate clarithromycin resistance is the E-Test, but is time consuming. Resistance of Hp to clarithromycin is due to point mutations in the 23S rRNA. Eight different point mutations have been related to CH resistance, but the large majority of the clarithromycin resistance depends on three point mutations (A2142C, A2142G and A2143G). A novel PCR-based clarithromycin resistance assays, even on paraffin-embedded biopsy specimens, have been proposed. Aims: to assess clarithromycin resistance detecting these point mutation (E-Test as a reference method);secondly, to investigate relation with MIC values. Methods: Paraffin-embedded biopsies of patients Hp-positive were retrieved. The A2142C, A2142G and A2143G point mutations were detected by molecular analysis after DNA extraction by using a TaqMan real-time PCR. Results: The study enrolled 86 patients: 46 resistant and 40 sensible to CH. The Hp status was evaluated at endoscopy, by rapid urease test (RUT), histology and hp culture. According to real-time PCR, 37 specimens were susceptible to clarithromycin (wild type dna) whilst the remaining 49 specimens (57%) were resistant. A2143G is the most frequent mutation. A2142C always express a resistant phenotype and A2142G leads to a resitant phenotype only if homozigous. 2) Background: Colonoscopy work-load for endoscopy services is increasing due to colorectal cancer prevention. We tested a combination of faecal tests to improve accuracy and prioritize the access to colonoscopy. Methods: we tested a combination of fecal tests (FOBT, M2-PK and calprotectin) in a group of 280 patients requiring colonoscopy. Results: 47 patients had CRC and 85 had advanced adenoma/s at colonoscopy/histology. In case of single test, for CRC detection FOBT was the test with the highest specificity and PPV, M2-PK had the highest sensitivity and higher NPV. Combination was more interesting in term of PPV. And the best combination of tests was i-FOBT + M2-PK.

Utilizzo del Software OpenStack per la realizzazione di Piattaforme "Cloud"

Il Cloud computing è probabilmente l'argomento attualmente più dibattuto nel mondo dell'Information and Communication Technology (ICT). La diffusione di questo nuovo modo di concepire l'erogazione di servizi IT, è l'evoluzione di una serie di tecnologie che stanno rivoluzionando le modalit à in cui le organizzazioni costruiscono le proprie infrastrutture informatiche. I vantaggi che derivano dall'utilizzo di infrastrutture di Cloud Computing sono ad esempio un maggiore controllo sui servizi, sulla struttura dei costi e sugli asset impiegati. I costi sono proporzionati all'eettivo uso dei servizi (pay-per-use), evitando dunque gli sprechi e rendendo più efficiente il sistema di sourcing. Diverse aziende hanno già cominciato a provare alcuni servizi cloud e molte altre stanno valutando l'inizio di un simile percorso. La prima organizzazione a fornire una piattaforma di cloud computing fu Amazon, grazie al suo Elastic Computer Cloud (EC2). Nel luglio del 2010 nasce OpenStack, un progetto open-source creato dalla fusione dei codici realizzati dall'agenzia governativa della Nasa[10] e dell'azienda statunitense di hosting Rackspace. Il software realizzato svolge le stesse funzioni di quello di Amazon, a differenza di questo, però, è stato rilasciato con licenza Apache, quindi nessuna restrizione di utilizzo e di implementazione. Oggi il progetto Openstack vanta di numerose aziende partner come Dell, HP, IBM, Cisco, e Microsoft. L'obiettivo del presente elaborato è quello di comprendere ed analizzare il funzionamento del software OpenStack. Il fine principale è quello di familiarizzare con i diversi componenti di cui è costituito e di concepire come essi interagiscono fra loro, per poter costruire infrastrutture cloud del tipo Infrastructure as a service (IaaS). Il lettore si troverà di fronte all'esposizione degli argomenti organizzati nei seguenti capitoli. Nel primo capitolo si introduce la definizione di cloud computing, trattandone le principali caratteristiche, si descrivono poi, i diversi modelli di servizio e di distribuzione, delineando vantaggi e svantaggi che ne derivano. Nel secondo capitolo due si parla di una delle tecnologie impiegate per la realizzazione di infrastrutture di cloud computing, la virtualizzazione. Vengono trattate le varie forme e tipologie di virtualizzazione. Nel terzo capitolo si analizza e descrive in dettaglio il funzionamento del progetto OpenStack. Per ogni componente del software, viene illustrata l'architettura, corredata di schemi, ed il relativo meccanismo. Il quarto capitolo rappresenta la parte relativa all'installazione del software e alla configurazione dello stesso. Inoltre si espongono alcuni test effettuati sulla macchina in cui è stato installato il software. Infine nel quinto capitolo si trattano le conclusioni con le considerazioni sugli obiettivi raggiunti e sulle caratteristiche del software preso in esame.

Characterization of igneous terranes by zircon dating: implications for the UHP relicts occurrences and suture identification in the Central Rhodope, Northern Greece

One of the key for the understanding of an orogenic belt is the characterization of the terranes involved and the identification of the suture(s) separating crustal blocks: these are essential information for large-scale paleo-reconstructions. In addition, the structural relationships between the terranes involved in the collisional processes and the eventual UHP relicts may provide first order inputs to exhumation models of subducted rocks. The structure of the Rhodope Massif (northern Greece and southern Bulgaria) results from the stacking of high-grade nappes during a continental collision, which age is comprised between Latest-Jurassic and Early-Cenozoic. UHP and HP relicts, associated with oceanic and ultramafic material, suggest the presence of a dismembered suture zone within the massif. The location of this suture remains unclear; furthermore, up to now, the UHP and eclogitic localities represent isolated spots and no synthesis on their structural position within the massif has been proposed. The first aim of this work is to define the relationships between HP-UHP relicts, crustal blocks, shear zones and amphibolitic material. To achieve this objective, we characterized the accreted blocks in terms of protoliths ages of the orthogneisses mainly along two cross sections on the Greek part of the belt. Geochemical affinities of meta-igneous rocks served as a complementary tool for terrane characterization and geodynamic interpretation. Single-zircon Pb-Pb evaporation and zircon U-Pb SHRIMP dating of orthogneiss protoliths define two groups of intrusion-ages: Permo-Carboniferous and Late Jurassic-Early Cretaceous. Structurally, these two groups correspond to distinct units: the Late Jurassic gneissic complex overthrusts the one bearing the Permo-Carboniferous orthogneisses. Mylonites, eclogites, amphibolites of oceanic affinities, and UHP micaschists, mark a “melange” zone, intensively sheared towards the SW, which separates the two units. Thus, we interpret them as two distinct terranes, the Rhodope and Thracia terranes, separated by the Nestos suture. The correlation of our findings in northern Greece to the Bulgarian part of the Massif suggests a northern rooting of the Nestos Suture. This configuration results of the closure of a marginal oceanic basin of the Tethys system by a north-directed subduction. This interpretation is supported by the geochemical affinities of the orthogneisses: the Late-Jurassic igneous rocks formed by subduction-related magmatism, pprobably the same north-directed subduction that gave rise to the UHP metamorphism of the metasediments of the “melange” zone. It is noteworthy that the UHP-HP relicts seem to be restricted to the contact between the two terranes suggesting that the UHP relicts are exhumed only within the suture zone. Furthermore, the singularity of the suture suggests that the Late-Jurassic subduction explains the occurrence of UHP and eclogite relicts in the Central Rhodope despite the large age range previously attributed the UHP and/or HP stage.

NMR spectroscopy and imaging of hyperpolarized gases

Since the discovery of the nuclear magnetic resonance (NMR) phenomenon, countless NMR techniques have been developed that are today indispensable tools in physics, chemistry, biology, and medicine. As one of the main obstacles in NMR is its notorious lack of sensitivity, different hyperpolarization (HP) methods have been established to increase signals up to several orders of magnitude. In this work, different aspects of magnetic resonance, using HP noble gases, are studied, hereby combining different disciplines of research. The first part examines new fundamental effects in NMR of HP gases, in theory and experiment. The spin echo phenomenon, which provides the basis of numerous modern experiments, is studied in detail in the gas phase. The changes of the echo signal in terms of amplitude, shape, and position, due to the fast translational motion, are described by an extension of the existing theory and computer simulations. With this knowledge as a prerequisite, the detection of intermolecular double-quantum coherences was accomplished for the first time in the gas phase. The second part of this thesis focuses on the development of a practical method to enhance the dissolution process of HP 129Xe, without loss of polarization or shortening of T1. Two different setups for application in NMR spectroscopy and magnetic resonance imaging (MRI) are presented. The continuous operation allows biological and multidimensional spectroscopy in solutions. Also, first in vitro MRI images with dissolved HP 129Xe as contrast agent were obtained at a clinical scanner.

Diffusion of laser polarized gases in MRI

The use of Magnetic Resonance Imaging (MRI) as a diagnostic tool is increasingly employing functional contrast agents to study or contrast entire mechanisms. Contrast agents in MRI can be classified in two categories. One type of contrast agents alters the NMR signal of the protons in its surrounding, e.g. lowers the T1 relaxation time. The other type enhances the Nuclear Magnetic Resonance (NMR) signal of specific nuclei. For hyperpolarized gases the NMR signal is improved up to several orders of magnitude. However, gases have a high diffusivity which strongly influences the NMR signal strength, hence the resolution and appearance of the images. The most interesting question in spatially resolved experiments is of course the achievable resolution and contrast by controlling the diffusivity of the gas. The influence of such diffusive processes scales with the diffusion coefficient, the strength of the magnetic field gradients and the timings used in the experiment. Diffusion may not only limit the MRI resolution, but also distort the line shape of MR images for samples, which contain boundaries or diffusion barriers within the sampled space. In addition, due to the large polarization in gaseous 3He and 129Xe, spin diffusion (different from particle diffusion) could play a role in MRI experiments. It is demonstrated that for low temperatures some corrections to the NMR measured diffusion coefficient have to be done, which depend on quantum exchange effects for indistinguishable particles. Physically, if these effects can not change the spin current, they can do it indirectly by modifying the velocity distribution of the different spin states separately, so that the subsequent collisions between atoms and therefore the diffusion coefficient can eventually be affected. A detailed study of the hyperpolarized gas diffusion coefficient is presented, demonstrating the absence of spin diffusion (different from particle diffusion) influence in MRI at clinical conditions. A novel procedure is proposed to control the diffusion coefficient of gases in MRI by admixture of inert buffer gases. The experimental measured diffusion agrees with theoretical simulations. Therefore, the molecular mass and concentration enter as additional parameters into the equations that describe structural contrast. This allows for setting a structural threshold up to which structures contribute to the image. For MRI of the lung this allows for images of very small structural elements (alveoli) only, or in the other extreme, all airways can be displayed with minimal signal loss due to diffusion.

UHP metamorphic rocks of the Eastern Rhodope Massif, NE Greece: new constraints from petrology, geochemistry and zircon ages

In this PhD thesis, a multidisciplinary study has been carried out on metagranitoids and paragneisses from the Eastern Rhodope Massif, northern Greece, to decipher the pre-Alpine magmatic and geodynamic evolution of the Rhodope Massif and to correlate the eastern part with the western/central parts of the orogen. The Rhodope Massif, which occupies the major part of NE Greece and S Bulgaria, represents the easternmost part of the Internal Hellenides. It is regarded as a nappe stack of high-grade units, which is classically subdivided into an upper unit and a lower unit, separated by a SSE-NNW trending thrust plane, the Nestos thrust. Recent research in the central Greek Rhodope Massif revealed that the two units correspond to two distinct terranes of different age, the Permo-Carboniferous Thracia Terrane, which was overthrusted by the Late Jurassic/Early Cretaceous Rhodope Terrane. These terranes are separated by the Nestos suture, a composite zone comprising metapelites, metabasites, metagranitoids and marbles, which record high-pressure and even ultrahigh-pressure metamorphism in places. Similar characteristic rock associations were investigated during this study along several well-constrained cross sections in vincity to the Ada, Sidiro and Kimi villages in the Greek Eastern Rhodope Massif. Field evidence revealed that the contact zone of the two terranes in the Eastern Rhodope Massif is characterized by a mélange of metapelites, migmatitic amphibolites/eclogites, strongly sheared orthogneisses and marbles. The systematical occurrence of this characteristic rock association between the terranes implies that the Nestos suture is a continuous belt throughout the Greek Rhodope Massif. In this study, a new UHP locality could be established and for the first time in the Greek Rhodope, metamorphic microdiamonds were identified in situ in their host zircons using Laser-Raman spectroscopy. The presence of the diamonds as well as element distribution patterns of the zircons, obtained by TOF-SIMS, indicate metamorphic conditions of T > 1000 °C and P > 4 GPa. The high-pressure and ultrahigh-pressure rocks of the mélange zone are considered to have formed during the subduction of the Nestos Ocean in Jurassic times at ~150 Ma. Melting of metapelitic rocks at UHP conditions facilitated the exhumation to lower crustal levels. To identify major crust forming events, basement granitoids were dated by LA-SF-ICPMS and SHRIMP-II U-Pb analyses of zircons. The geochronological results revealed that the Eastern Rhodope Massif consists of two crustal units, a structurally lower Permo-Carboniferous unit corresponding to the Thracia Terrane and a structurally upper Late Jurassic/Early Cretaceous unit corresponding to the Rhodope Terrane, like it was documented for the Central Rhodope Massif. Inherited zircons in the orthogneisses from the Thracia Terrane of the Eastern Rhodope Massif indicate the presence of a pre-existing Neoproterozoic and Ordovician-Silurian basement in this region. Triassic magmatism is witnessed by the zircons of few orthogneisses from the easternmost Rhodope Massif and is interpreted to be related to rifting processes. Whole-rock major and trace element analyses indicate that the metagranitoids from both terranes originated in a subduction-related magmatic-arc environment. The Sr-Nd isotope data for both terranes of the Eastern and Central Rhodope Massif suggest a mixed crust-mantle source with variable contributions of older crustal material as already indicated by the presence of inherited zircons. Geochemical and isotopic similarity of the basement of the Thracia Terrane and the Pelagonian Zone implies that the Thracia Terrane is a fragment of a formerly unique Permo-Carboniferous basement, separated by rifting and opening of the Meliata-Maliac ocean system in Triassic times. A branch of the Meliata-Maliac ocean system, the Nestos Ocean, subducted northwards in Late Jurassic times leading to the formation of the Late Jurassic/Early Cretaceous Rhodope magmatic arc on remnants of the Thracia Terrane as suggested by inherited Permo-Carboniferous zircons. The ~150 Ma zircon ages of the orthogneisses from the Rhodope Terrane indicate that subduction-related magmatism and HP/UHP metamorphism occurred during the same subduction phase. Subduction ceased due to the closure of the Nestos Ocean in the Late Jurassic/Early Cretaceous. The post-Jurassic evolution of the Rhodope Massif is characterized by the exhumation of the Rhodope core complex in the course of extensional tectonics associated with late granite intrusions in Eocene to Miocene times.

Comparison of affinity chromatography supports for separation of protein

Chromatography is the most widely used technique for high-resolution separation and analysis of proteins. This technique is very useful for the purification of delicate compounds, e.g. pharmaceuticals, because it is usually performed at milder conditions than separation processes typically used by chemical industry. This thesis focuses on affinity chromatography. Chromatographic processes are traditionally performed using columns packed with porous resin. However, these supports have several limitations, including the dependence on intra-particle diffusion, a slow mass transfer mechanism, for the transport of solute molecules to the binding sites within the pores and high pressure drop through the packed bed. These limitations can be overcome by using chromatographic supports like membranes or monoliths. Dye-ligands are considered important alternatives to natural ligands. Several reactive dyes, particularly Cibacron Blue F3GA, are used as affinity ligand for protein purification. Cibacron Blue F3GA is a triazine dye that interacts specifically and reversibly with albumin. The aim of this study is to prepare dye-affinity membranes and monoliths for efficient removal of albumin and to compare the three different affinity supports: membranes and monoliths and a commercial column HiTrapTM Blue HP, produced by GE Healthcare. A comparison among the three supports was performed in terms of binding capacity at saturation (DBC100%) and dynamic binding capacity at 10% breakthrough (DBC10%) using solutions of pure BSA. The results obtained show that the CB-RC membranes and CB-Epoxy monoliths can be compared to commercial support, column HiTrapTM Blue HP, for the separation of albumin. These results encourage a further characterization of the new supports examined.

Entwicklung und Anwendung eines Beatmungssystems zur Untersuchung der Lungenfeinstruktur mittels He-3-Magnetresonanztomographie

Im Rahmen meiner Dissertation wurde ein 3He-Applikationssystem für die in-vivo 3He-Magnetresonanztomographie der Lunge von Ratten entwickelt. Im Gegensatz zu anderen bisher entwickelten MR-kompatiblen Beatmungsgeräten wurde in diesem Applikationssystem erstmals der polarisationserhaltende ³He-Langzeitspeicher im Streufeld des Tomographen integriert. Bei der 3He-Applikation wird das 3He-Gas automatisch aus dem Langzeitspeicher außerhalb des Magneten zum Tier in den Tomographen geleitet. Die Kernspin-Polarisationsverluste, die beim 3He-Transfer zum Tier in den Tomographen auftreten, betragen etwa 1% (rel.) und sind vernachlässigbar gering. Das Beatmungssystem wurde zusammen mit der MRT-Bildgebungssequenz COMSPIRA an mehr als 200 Tieren erfolgreich getestet. Die MRT-Aufnahmen fanden hauptsächlich an einem 0,47 T Niederfeldtomographen bei der Firma Boehringer-Ingelheim Pharma in Biberach statt. Es wurden sowohl morphologische Aufnahmen der Rattenlunge gemacht als auch der „Apparent Diffusion Coefficient“ (ADC) gemessen. Die relative Streuung der ADC-Werte innerhalb einer Gruppe von Tieren ähnlichen Alters und Gewichts betrug dabei 5%. Bei Wiederholungsmessungen an ein und demselben Tier verringerte sich die relative Streuung auf 1%. Diese Werte unterstreichen die hohe Reproduzierbarkeit des Beatmungssystems sowie des gesamten Messverfahrens. Weiterhin wurde ein Verfahren vorgestellt, das den experimentell bestimmten ADC unabhängig von dem Mischungsverhältnis zwischen dem applizierten 3He und der Atemluft in der Lunge macht. Dies kann erreicht werden, indem das hp 3He mit dem chemisch inerten und ungiftigen Gas SF6 in einem definierten Verhältnis gemischt wird und anschließend dem Tier appliziert wird. Zuletzt wurde der ADC von emphysematischen Rattenlungen und von gesunden Rattenlungen gemessen. Die Ergebnisse zeigten einen signifikant kleineren ADC innerhalb der Gruppe der erkrankten Tiere. Diese Dissertation wurde durch die Boehringer-Ingelheim Pharma GmbH & Co. KG unterstützt.