974 resultados para GREEN BUILDING
Resumo:
The aim of this study was to identify the relation between the evapotranspirometer demand and the supply of water from local rainfall, evaluating the possibility of using water excess for irrigation of Green Roofs in the State of Mato Grosso, in Brazil. The study was done using a series of historical data provided by the National Institute of Meteorology (INMET - Instituto Nacional de Meteorologia) which has official climatological stations in 12 cities and regions of the State. The evapotranspiration values were obtained by the Penman-Monteith method and by the Climatic Water Balance (CWB) by the Thornthwaite and Mather method using Available Water Capacity (AWC) of 12mm. With the CWB the excess and deficit were calculated, which were used for the estimative of the volume and area of a reservoir as a function of a collector area of a roof of 100m² and the volume of supplementary water for irrigation. With the obtained results, it was found that in most investigated regions of the State the use of green roofs is not compromised by the water deficiency. On the other hand, the use of a reservoir to accumulate the rain water excess may be impractical, because it requires a considerable area for installation and also because of the high cost of the land.
Resumo:
ABSTRACT This study aimed to identify wavelengths based on leaf reflectance (400-1050 nm) to estimate white mold severity in common beans at different seasons. Two experiments were carried out, one during fall and another in winter. Partial Least Squares (PLS) regression was used to establish a set of wavelengths that better estimates the disease severity at a specific date. Therefore, observations were previously divided in two sub-groups. The first one (calibration) was used for model building and the second subgroup for model testing. Error measurements and correlation between measured and predicted values of disease severity index were employed to provide the best wavelengths in both seasons. The average indexes of each experiment were of 5.8% and 7.4%, which is considered low. Spectral bands ranged between blue and green, green and red, and red and infrared, being most sensitive for disease estimation. Beyond the transition ranges, other spectral regions also presented wavelengths with potential to determine the disease severity, such as red, green, and near infrared.
Resumo:
Object-oriented programming is a widely adopted paradigm for desktop software development. This paradigm partitions software into separate entities, objects, which consist of data and related procedures used to modify and inspect it. The paradigm has evolved during the last few decades to emphasize decoupling between object implementations, via means such as explicit interface inheritance and event-based implicit invocation. Inter-process communication (IPC) technologies allow applications to interact with each other. This enables making software distributed across multiple processes, resulting in a modular architecture with benefits in resource sharing, robustness, code reuse and security. The support for object-oriented programming concepts varies between IPC systems. This thesis is focused on the D-Bus system, which has recently gained a lot of users, but is still scantily researched. D-Bus has support for asynchronous remote procedure calls with return values and a content-based publish/subscribe event delivery mechanism. In this thesis, several patterns for method invocation in D-Bus and similar systems are compared. The patterns that simulate synchronous local calls are shown to be dangerous. Later, we present a state-caching proxy construct, which avoids the complexity of properly asynchronous calls for object inspection. The proxy and certain supplementary constructs are presented conceptually as generic object-oriented design patterns. The e ect of these patterns on non-functional qualities of software, such as complexity, performance and power consumption, is reasoned about based on the properties of the D-Bus system. The use of the patterns reduces complexity, but maintains the other qualities at a good level. Finally, we present currently existing means of specifying D-Bus object interfaces for the purposes of code and documentation generation. The interface description language used by the Telepathy modular IM/VoIP framework is found to be an useful extension of the basic D-Bus introspection format.
Resumo:
Työssä tutkitaan Helsingin kaupungin tilakeskuksen kiinteistöjen energiatehokkuusnäkö-kohtien toteutumista ja niiden kehittämistä. Työn tavoite on tunnistaa kiinteistöjen energia-tehokkuuskriteeristö, jonka avulla energiatehokkuus voidaan ottaa järjestelmällisesti ja yh-denmukaisesti huomioon tilakeskuksen investointihankkeissa. Kriteerit tunnistetaan tila-keskuksen henkilöstön ja yhteistyökumppaneiden haastattelujen sekä lähdekirjallisuuden avulla. Tutkimus osoittaa, että kriteeristössä on huomioitava myös hankkeiden vastuurajat, sillä hiljattain tehdyn organisaatiomuutoksen vuoksi vastuurajoissa on epäselvyyttä, mikä vai-kuttaa haitallisesti tilakeskuksen toiminnan ja etenkin energiatehokkuuden kehittämiseen. Työssä esiteltyä kriteeristöä täytyy pyrkiä käyttämään tilakeskuksen hankkeiden osana jat-kossa. Työssä esitetään tilakeskuksen kannalta merkittävät kriteerit.
Resumo:
Alumni are considered as precious resource of the institutions, thus improving alumni adminis-tration is critical. In information era, alumni administration is assisted by widespread information technology, such as social network sites. This paper aims to discover if a self-built information sys-tem would enhance alumni connection in the IMMIT context, and what kind of attributes would be helpful applying to the special context. The current online alumni services at other universities and at the IMMIT host university are analyzed, and then social media is introduced. After illustrating the social capital existing in IM-MIT, the type of the self-built information system is suggested, following an interpretation of the prototype. Two research models are utilized in this article: TAM and intentional social action model. The second model is adjusted with proposed parameters. Afterwards, a survey and an interview protocol are designed under the guidance of the models. The results are analyzed in several groups, and the proposed parameters are tested. A conclusion is drawn to indicate how to improve alumni‟s intention to use and how to achieve a better-accepted design.
Resumo:
In order to grow, cities are increasingly competing for attention, jobs, investments, visitors, residents and significant events. Cities need to come up with creative solutions to keep up with the competition; they ought to become creative cities. Attracting talented and diverse inhabitants is a key factor in developing a creative city, which on is characterized by openness, tolerance, vibrancy and diversity. Along the need for renewed city images city brand building has become popular. Helsinki is the World Design Capital 2012 (WDC 2012) and this mega-event presents a meaningful opportunity for the city to broadcast itself globally. The purpose of this study is to evaluate how Helsinki brands itself as a creative city through an international mega-event. The sub-aims are to: 1) Map the factors behind the creative city and their relation to the city of Helsinki, 2) Describe the city branding process, 3) Evaluate the role of the Helsinki World Design Capital 2012 mega-event in Helsinki’s creative city brand building. First, the theory discusses the concept of the creative city that has gained growing attention during the past decade. Then, the city branding process is described and the benefits of hosting a mega-event are presented. Finally, co-branding a city and a mega-event in order to generate maximum benefit from the mega-event, is reviewed. This is a qualitative research for which data was collected through three face-to-face interviews, the World Design Capital 2012 bid, Helsinki’s economic development strategy, a consulting firm’s research report on the case city and web-pages. The research reveals that Helsinki has shown interest in the creative city discussion. The terminology around the concept is however approached carefully. Helsinki fits many of the creative city characteristics and recognizes its flaws for which improvement strategies have been planned. Bottlenecks keeping the city from promoting a more open mind were mainly revealed in its organizational structures. Helsinki has no official brand strategy; nonetheless pressure to develop one is present. The World Design Capital 2012 mega-event is seen as a meaningful stepping board to strengthen Helsinki’s identity and image, and start thinking about a city brand. The brand strategies of the mega-event support the values and virtues of the city itself, which enables benefits of co-branding introduces in the theory part. Helsinki has no official brand and doesn’t call itself a creative city, however this study shows signs of the city taking steps towards building a creative city brand with the help of the Helsinki World Design Capital 2012 mega-event.
Resumo:
Besides the sustaining of healthy and comfortable indoor climate, the air conditioning system should also achieve for energy efficiency. The target indoor climate can be ob-tained with different systems; this study focuses on comparing the energy efficiency of different air conditioning room unit systems in different climates. The calculations are made with dynamic energy simulation software IDA ICE by comparing the indoor cli-mate and energy consumption of an office building with different systems in different climates. The aim of the study is to compare the energy efficiency of chilled beam systems to other common systems: variable air volume, fan coil and radiant ceiling systems. Besides the annual energy consumption also the sustainability of target indoor climate is compared between the simulations. Another aim is to provide conclusions to be used in the product development of the chilled beam systems’ energy efficiency. The adaptable chilled beam system and the radiant ceiling system prove to be energy efficient independent of the climate. The challenge of reliable comparison is that other systems are not able to reach the target indoor climate as well as the others. The complex calculation environment of the simulation software, made assumptions and excluding of the financial aspects complicate comparing the big picture. The results show that the development of the chilled beam systems should concentrate on energy efficient night heating, flexible demand based ventilation and capacity control and possibilities on integrating the best practices with other systems.
Resumo:
Blood profiles were determined in 47 juvenile green turtles, Chelonia mydas, from São Paulo northern coast, Brazil. Twenty-nine were affected by fibropapillomas and 18 were tumor free. Complete gross and histopathologic examinations of the fibropapillo were performed in 21 green turtles. Biometrical data, size, location and amount of tumors were recorded. The papillomas varied in morphology, location, size, color and texture. We found hyperplastic stroma, rich in blood vessels and connective tissue with increase in thickness of the dermis. The tumors w0ere classified as papillomas or fibropapillomas according to their epithelial and/or stromal proliferation. The lowest Mean Corpuscular Hemoglobin (HCM) values were observed in affected turtles.
Resumo:
This thesis investigated building information modeling (BIM) from a material supplier’s point of view. The objective was to gain understanding about how a building material supplier could benefit from the growing use of BIM in the AEC (architectural, engineering and construction) industry. Increasing amount of inquiries related to BIM from customers and other interest groups had awoken target company’s interest towards BIM. This thesis acts as a pre-study for the target company related to potential of BIM. First of all BIM and its meaning from a material supplier’s point of view was defined based on a literature review. To reveal the potential benefits of BIM for a material supplier a questionnaire survey and in total of 11 interviews were conducted. Based on the literature review and analyzed results it came clear that BIM offers benefits also for material suppliers. Product libraries and material databases for BIM tools can act as an important marketing channel for material suppliers. Material suppliers could also utilize the information from the BIM models to schedule their deliveries more precisely and potentially even to schedule their own production. All this needs deeper cooperation between material suppliers, contractors and other stakeholders in the AEC industry. Based on the results also first steps for the target company to utilize the growing use of BIM were defined.
Resumo:
Presentation at the Nordic Perspectives on Open Access and Open Science seminar, Helsinki, October 15, 2013
Resumo:
Kristiina Hormia-Poutasen esitys CBUC-konferenssissa Barcelonassa 12.4.2013.
Resumo:
Kristiina Hormia-Poutasen esitys CBUC-konferenssissa Barcelonassa 12.4.2013.
Resumo:
Kristiina Hormia-Poutasen esitys CBUC-konferenssissa Barcelonassa 12.4.2013.
Resumo:
Kristiina Hormia-Poutasen esitys CBUC-konferenssissa 12.4.2013 Barcelonassa.
Resumo:
Organizational creativity is increasingly important for organizations aiming to survive and thrive in complex and unexpectedly changing environments. It is precondition of innovation and a driver of an organization’s performance success. Whereas innovation research increasingly promotes high-involvement and participatory innovation, the models of organizational creativity are still mainly based on an individual-creativity view. Likewise, the definitions of organizational creativity and innovation are somewhat equal, and they are used as interchangeable constructs, while on the other hand they are seen as different constructs. Creativity is seen as generation of novel and useful ideas, whereas innovation is seen as the implementation of these ideas. The research streams of innovation and organizational creativity seem to be advancing somewhat separately, although together they could provide many synergy advantages. Thereby, this study addresses three main research gaps. First, as the knowledge and knowing is being increasingly expertized and distributed in organizations, the conceptualization of organizational creativity needs to face that perspective, rather than relying on the individual-creativity view. Thus, the conceptualization of organizational creativity needs clarification, especially as an organizational-level phenomenon (i.e., creativity by an organization). Second, approaches to consciously build organizational creativity to increase the capacity of an organization to demonstrate novelty in its knowledgeable actions are rare. The current creativity techniques are mainly based on individual-creativity views, and they mainly focus on the occasional problem-solving cases among a limited number of individuals, whereas, the development of collective creativity and creativity by the organization lacks approaches. Third, in terms of organizational creativity as a collective phenomenon, the engagement, contributions, and participation of organizational members into activities of common meaning creation are more important than the individualcreativity skills. Therefore, the development approaches to foster creativity as social, emerging, embodied, and collective creativity are needed to complement the current creativity techniques. To address these gaps, the study takes a multiparadigm perspective to face the following three objectives. The first objective of this study is to clarify and extend the conceptualization of organizational creativity. The second is to study the development of organizational creativity. The third is to explore how an improvisational theater based approach fosters organizational creativity. The study consists of two parts comprising the introductory part (part I) and six publications (part II). Each publication addresses the research questions of the thesis through detailed subquestions. The study makes three main contributions to the research of organizational creativity. First, it contributes toward the conceptualization of organizational creativity by extending the current view of organizational creativity. This study views organizational creativity as a multilevel construct constituting both of individual and collective (group and organizational) creativity. In contrast to current views of organizational creativity, this study bases on organizational (collective) knowledge that is based on and demonstrated through the knowledgeable actions of an organization as a whole. The study defines organizational creativity as an overall ability of an organization to demonstrate novelty in its knowledgeable actions (through what it does and how it does what it does).Second, this study contributes toward the development of organizational creativity as multi-level phenomena, introducing developmental approaches that face two or more of these levels simultaneously. More specifically, the study presents the cross-level approaches to building organizational creativity, by using an approach based in improvisational theater and considering assessment of organizational renewal capability. Third, the study contributes on development of organizational creativity using an improvisational theater based approach as twofold meaning. First, it fosters individual and collective creativity simultaneously and builds space for creativity to occur. Second, it models collective and distributed creativity processes, thereby, contributing to the conceptualization of organizational creativity.