Connecting visual and analytic reasoning to improve students' spatial visualization abilities: A constructivist approach

Current reform initiatives recommend that school geometry teaching and learning include the study of three-dimensional geometric objects and provide students with opportunities to use spatial abilities in mathematical tasks. Two ways of using Geometer's Sketchpad (GSP), a dynamic and interactive computer program, in conjunction with manipulatives enable students to investigate and explore geometric concepts, especially when used in a constructivist setting. Research on spatial abilities has focused on visual reasoning to improve visualization skills. This dissertation investigated the hypothesis that connecting visual and analytic reasoning may better improve students' spatial visualization abilities as compared to instruction that makes little or no use of the connection of the two. Data were collected using the Purdue Spatial Visualization Tests (PSVT) administered as a pretest and posttest to a control and two experimental groups. Sixty-four 10th grade students in three geometry classrooms participated in the study during 6 weeks. Research questions were answered using statistical procedures. An analysis of covariance was used for a quantitative analysis, whereas a description of students' visual-analytic processing strategies was presented using qualitative methods. The quantitative results indicated that there were significant differences in gender, but not in the group factor. However, when analyzing a sub sample of 33 participants with pretest scores below the 50th percentile, males in one of the experimental groups significantly benefited from the treatment. A review of previous research also indicated that students with low visualization skills benefited more than those with higher visualization skills. The qualitative results showed that girls were more sophisticated in their visual-analytic processing strategies to solve three-dimensional tasks. It is recommended that the teaching and learning of spatial visualization start in the middle school, prior to students' more rigorous mathematics exposure in high school. A duration longer than 6 weeks for treatments in similar future research studies is also recommended.

Quantum transition state theory and solving a first order master equation for complex reactions numerically

The field of chemical kinetics is an exciting and active field. The prevailing theories make a number of simplifying assumptions that do not always hold in actual cases. Another current problem concerns a development of efficient numerical algorithms for solving the master equations that arise in the description of complex reactions. The objective of the present work is to furnish a completely general and exact theory of reaction rates, in a form reminiscent of transition state theory, valid for all fluid phases and also to develop a computer program that can solve complex reactions by finding the concentrations of all participating substances as a function of time. To do so, the full quantum scattering theory is used for deriving the exact rate law, and then the resulting cumulative reaction probability is put into several equivalent forms that take into account all relativistic effects if applicable, including one that is strongly reminiscent of transition state theory, but includes corrections from scattering theory. Then two programs, one for solving complex reactions, the other for solving first order linear kinetic master equations to solve them, have been developed and tested for simple applications.

Capacity planning methodology for concurrent engineer -to -order operations

This research focuses on developing a capacity planning methodology for the emerging concurrent engineer-to-order (ETO) operations. The primary focus is placed on the capacity planning at sales stage. This study examines the characteristics of capacity planning in a concurrent ETO operation environment, models the problem analytically, and proposes a practical capacity planning methodology for concurrent ETO operations in the industry. A computer program that mimics a concurrent ETO operation environment was written to validate the proposed methodology and test a set of rules that affect the performance of a concurrent ETO operation. ^ This study takes a systems engineering approach to the problem and employs systems engineering concepts and tools for the modeling and analysis of the problem, as well as for developing a practical solution to this problem. This study depicts a concurrent ETO environment in which capacity is planned. The capacity planning problem is modeled into a mixed integer program and then solved for smaller-sized applications to evaluate its validity and solution complexity. The objective is to select the best set of available jobs to maximize the profit, while having sufficient capacity to meet each due date expectation. ^ The nature of capacity planning for concurrent ETO operations is different from other operation modes. The search for an effective solution to this problem has been an emerging research field. This study characterizes the problem of capacity planning and proposes a solution approach to the problem. This mathematical model relates work requirements to capacity over the planning horizon. The methodology is proposed for solving industry-scale problems. Along with the capacity planning methodology, a set of heuristic rules was evaluated for improving concurrent ETO planning. ^

ASDN : Automated Software Design Notebook tool

Software Engineering is one of the most widely researched areas of Computer Science. The ability to reuse software, much like reuse of hardware components is one of the key issues in software development. The object-oriented programming methodology is revolutionary in that it promotes software reusability. This thesis describes the development of a tool that helps programmers to design and implement software from within the Smalltalk Environment (an Object- Oriented programming environment). The ASDN tool is part of the PEREAM (Programming Environment for the Reuse and Evolution of Abstract Models) system, which advocates incremental development of software. The Asdn tool along with the PEREAM system seeks to enhance the Smalltalk programming environment by providing facilities for structured development of abstractions (concepts). It produces a document that describes the abstractions that are developed using this tool. The features of the ASDN tool are illustrated by an example.

O erro produzido pelo aluno no contexto pedagógico: uma luz ou uma pedra no meio do caminho?

Student’s mistakes as viewed in a didactic and pedagogical perspective are a phenomenon inevitably observed in any context in which formal teaching-andlearning processes are taking place. Researchers have shown that such mistakes are viewed most of the times as undesirable and often as a consequence of lack of attention or poor commitment on the part of the student and rarely considered didactically useful. The object of our reflections in this work is exactly those mistakes, which are born in the entrails of the teaching-and-learning processes. It is our understanding that a mistake constitutes a tool which mediates knowledge and may therefore become a strong ally of the instructor’s actions in her/his teaching tasks and thus should be taken into the teacher’s best consideration. Understanding a mistake as so, we postulate that the teacher must face it as a possibility to be exploited rather than as a negative occurrence. Such an attitude on the part of the teacher would undoubtedly render profitable didactic situations. To deepen the understanding of our aim, we took a case study on the perception of senior college students in the program of Mathematics at UFRN in the year 2009, 2nd term. The reason of this choice is the fact that Mathematics is the field presenting traditionally the poorest records in terms of school grades. In this work we put forth data associated to ENEM1 , to the UFRN Vestibular2 and the undergraduate courses on Mathematics. The theoretical matrixes supporting our reflections in this thesis follow the ideas proposed by Castorina (1988); Davis e Espósito (1990); Aquino (1997); Luckesi (2006); Cury (1994; 2008); Pinto (2000); Torre (2007). To carry out the study, we applied a semi-structured questionnaire containing 14 questions, out of which 10 were open questions. The questions were methodologically based on the Thematic Analysis – One of the techniques for Content Analysis schemed by Bardin (1977) – and it was also used the computer program Modalisa 6.0 (A software designed by faculties the University of Paris VIII). The results indicate that most of the teachers training instructors in their pedagogical practice view the mistakes made by their students only as a guide for grading and, in this procedure, the student is frequently labeled as guilty. Conclusive analyses, therefore, signal to the necessity of orienting the teachers training instructors in the sense of building a new theoretical contemplation of the students’ mistakes and their pedagogical potentialities and so making those professionals perceive the importance of such mistakes, since they reveal gaps in the process of learning and provide valuable avenues for the teaching procedures.

Interface para tecnologia assistiva baseada em eletrooculografia

We propose in this work, a new method of conceptual organization of areas involving assistive technology, categorizing them in a logical and simple manner; Furthermore, we also propose the implementation of an interface based on electroculography, able to generate high-level commands, to trigger robotic, computer and electromechanical devices. To validate the eye interface, was developed an electronic circuit associated with a computer program that captured the signals generated by eye movements of users, generating high-level commands, able to trigger an active bracing and many other electromechanical systems. The results showed that it was possible to control many electromechanical systems through only eye movements. The interface is presented as a viable way to perform the proposed task and can be improved in the signals analysis in the the digital level. The diagrammatic model developed, presented as a tool easy to use and understand, providing the conceptual organization needs of assistive technology

Uma interface para o controle de robôs móveis por intermédio de gestos

The main objective of this work was to enable the recognition of human gestures through the development of a computer program. The program created captures the gestures executed by the user through a camera attached to the computer and sends it to the robot command referring to the gesture. They were interpreted in total ve gestures made by human hand. The software (developed in C ++) widely used the computer vision concepts and open source library OpenCV that directly impact the overall e ciency of the control of mobile robots. The computer vision concepts take into account the use of lters to smooth/blur the image noise reduction, color space to better suit the developer's desktop as well as useful information for manipulating digital images. The OpenCV library was essential in creating the project because it was possible to use various functions/procedures for complete control lters, image borders, image area, the geometric center of borders, exchange of color spaces, convex hull and convexity defect, plus all the necessary means for the characterization of imaged features. During the development of the software was the appearance of several problems, as false positives (noise), underperforming the insertion of various lters with sizes oversized masks, as well as problems arising from the choice of color space for processing human skin tones. However, after the development of seven versions of the control software, it was possible to minimize the occurrence of false positives due to a better use of lters combined with a well-dimensioned mask size (tested at run time) all associated with a programming logic that has been perfected over the construction of the seven versions. After all the development is managed software that met the established requirements. After the completion of the control software, it was observed that the overall e ectiveness of the various programs, highlighting in particular the V programs: 84.75 %, with VI: 93.00 % and VII with: 94.67 % showed that the nal program performed well in interpreting gestures, proving that it was possible the mobile robot control through human gestures without the need for external accessories to give it a better mobility and cost savings for maintain such a system. The great merit of the program was to assist capacity in demystifying the man set/machine therefore uses an easy and intuitive interface for control of mobile robots. Another important feature observed is that to control the mobile robot is not necessary to be close to the same, as to control the equipment is necessary to receive only the address that the Robotino passes to the program via network or Wi-Fi.

Desempenho agronômico, bromatológico e estabilidade fenotípica de sorgo silageiro em Uberlândia - MG

Sorghum (Sorghum bicolor (L.) Moench) is a good alternative to be used as silage, especially in places with water scarcity and high temperatures, due to their morphological and physiological characteristics. The appropriate management, as the ideal seeding time, interferes both productivity and the quality of silage. The work was conducted with the objective of evaluating the agronomic and bromatological performance of varieties and hybrids of silage sorghum and their phenotypic stability in two seasons, season and off-season, in the city of Uberlândia, Minas Gerais. The experiments were performed at Capim Branco Experimental Farm of Federal University of Uberlândia (UFU), located in the referred city. There were two sowing dates in the same experimental area, off-season (March to June 2014) and season (November 2014 to March 2015), and the varieties and hybrids were evaluated in both situations. The design was a randomized block with 25 treatments (hybrids and varieties of sorghum) and three replications. Agronomical and bromatological data were subjected to an analysis of variance; averages were grouped by Scott-Knott test at 5% of probability, through Genes computer program; and to estimate the stability, it was opted for Annicchiarico method. The flowering of cultivars, dry matter productivity, plant height, Acid Detergent Fiber (ADF), Neutral Detergent Fiber (NDF) and Crude Protein (CP) are affected by the environment and the variety. Regarding productivity and quality of the fiber, SF11 variety was superior, independent of the rated environment. In relation to the performance stability of dry matter, the varieties SF15, SF11, SF25, PROG 134 IPA, 1141572, 1141570 and 1141562 were highlighted. For the stability of the quality of fibers (FDA and FDN), the variety 1141562 stood out. The environment reduces the expression of characters “days of flowering”, “plant height” and “productivity of dry matter of hybrids”. From the 25 hybrids analyzed for productivity and stability of dry matter performance, seven were highlighted, regardless of the rated environment: Volumax commercial hybrid and experiments 12F39006, 12F39007, 12F37014, 12F39014, 12F38009 and 12F02006.

Utilização de pulsos de radiofrequência fortemente modulados no processamento de informação quântica via ressonância magnética nuclear

Nesta dissertação apresentamos um trabalho de desenvolvimento e utilização de pulsos de radiofreqüência modulados simultaneamente em freqüência, amplitude e fase (pulsos fortemente modulados, SMP, do inglês Strongly Modulated Pulses) para criar estados iniciais e executar operações unitárias que servem como blocos básicos para processamento da informação quântica utilizando Ressonância Magnética Nuclear (RMN). As implementações experimentais foram realizas em um sistema de 3 q-bits constituído por spins nucleares de Césio 133 (spin nuclear 7/2) em uma amostra de cristal líquido em fase nemática. Os pulsos SMP´s foram construídos teoricamente utilizando um programa especialmente desenvolvido para esse fim, sendo o mesmo baseado no processo de otimização numérica Simplex Nelder-Mead. Através deste programa, os pulsos SMP foram otimizados de modo a executarem as operações lógicas desejadas com durações consideravelmente menores que aquelas realizadas usando o procedimento usual de RMN, ou seja, seqüências de pulsos e evoluções livres. Isso tem a vantagem de reduzir os efeitos de descoerência decorrentes da relaxação do sistema. Os conceitos teóricos envolvidos na criação dos SMPs são apresentados e as principais dificuldades (experimentais e teóricas) que podem surgir devido ao uso desses procedimentos são discutidas. Como exemplos de aplicação, foram produzidos os estados pseudo-puros usados como estados iniciais de operações lógicas em RMN, bem como operações lógicas que foram posteriormente aplicadas aos mesmos. Utilizando os SMP\'s também foi possível realizar experimentalmente os algoritmos quânticos de Grover e Deutsch-Jozsa para 3 q-bits. A fidelidade das implementações experimentais foi determinadas utilizando as matrizes densidade experimentais obtidas utilizando um método de tomografia da matriz densidade previamente desenvolvido.

Relational work in synchronous text-based CMC of virtual teams

Based on close examinations of instant message (IM) interactions, this chapter argues that an interactional sociolinguistic approach to computer-mediated language use could provide explanations for phenomena that previously could not be accounted for in computer-mediated discourse analysis (CMDA). Drawing on the theoretical framework of relational work (Locher, 2006), the analysis focuses on non-task oriented talk and its function in forming and establishing communication norms in the team, as well as micro-level phenomena, such as hesitation, backchannel signals and emoticons. The conclusions of this preliminary research suggest that the linguistic strategies used for substituting audio-visual signals are strategically used in discursive functions and have an important role in relational work

The lost experiment in exploration and exploitation

This paper focuses on James March’s 1991 article on ‘Exploration and Exploitation in Organizational Learning’, which is now the seventh most highly cited paper in management and organisation studies. March’s paper is based on a computer program that simulates the collective and individual learning of a group of fifty individuals. The largely forgotten story that this paper re-calls is the real-life experiment that March, in large part, designed and conducted when he was the new ‘boy Dean’ of the School of Social Sciences in the University of California at Irvine between 1964 and 1969. Taken together, both stories illuminate important moments in the history of organisation studies. The comparison suggests that March’s model, which was probably the first simulation of an organisation learning, also worked to constitute rather than model the phenomenon.

Dificultades del profesorado para planificar, coordinar y evaluar competencias claves. Un análisis desde la Inspección de Educación.

Este artículo presenta una investigación en la que se analizan las dificultades del profesorado para planificar, coordinar y evaluar competencias claves en una muestra de 23 centros educativos. El tema tiene hondas repercusiones ya que una mala praxis educativa de las competencias claves puede conculcar uno de los derechos fundamentales del alumnado a ser evaluado de forma objetiva (LODE: Art.6b y RD 732/1995: Art. 13.1) y poder superar las pruebas de evaluación consideradas necesarias para la obtención del título académico mínimo que otorga el estado español. La investigación se ha desarrollado desde una doble perspectiva metodológica; en primer lugar, es una investigación descriptiva en la que presentamos las características fundamentales de las competencias claves y la normativa básica para su desarrollo y evaluación. En segundo lugar,  aplicamos un procedimiento de análisis con una doble vertiente cualitativa mediante el empleo del programa Atlas-Ti y del enfoque reticular-categorial del análisis de redes sociales con la aplicación de UCINET y el visor yED Graph Editor para abordar el análisis de las principales dificultades y obstáculos detectados. Los resultados muestran que existen serias dificultades en las tres dimensiones analizadas: "planificación", "coordinación" y "evaluación" de competencias clave; especialmente en la necesidad de formación del profesorado, en la evaluación de las competencias, en la metodología para su desarrollo y en los procesos de coordinación interna para su consecución en los centros educativos.

2005 Seat Belt Usage Survey, June 12, 2006

During the spring and summer of 2005, two surveys were taken of motor vehicle drivers’ and passengers’ seat belt usage. These surveys are before and after parts of the “Click it or Ticket” education and enforcement campaign. The whole project starts with a pre-campaign survey followed by the four-week public information, education and enforcement campaign. Finally, the postcampaign survey is taken to test the effectiveness of the education and enforcement campaign. In the pre-campaign survey of seat belt usage, the usage/non-usage of 15,444 front seat occupants of cars, vans, SUVs and pickups were observed at 100 locations. In the post-campaign survey of seat belt usage, 15,731 observations were made of front seat occupants of cars, vans, SUVs and pickups. The day of the week and time of day the observations took place were selected for each site using a random number generation computer program.

Projeto de estabilidade de um edifício para uma sala elétrica em betão armado e estrutura metálica

Trabalho de Projeto para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização Estruturas

New developments in UAV remote sensing for pest management and the implications for cotton

Efficient crop monitoring and pest damage assessments are key to protecting the Australian agricultural industry and ensuring its leading position internationally. An important element in pest detection is gathering reliable crop data frequently and integrating analysis tools for decision making. Unmanned aerial systems are emerging as a cost-effective solution to a number of precision agriculture challenges. An important advantage of this technology is it provides a non-invasive aerial sensor platform to accurately monitor broad acre crops. In this presentation, we will give an overview on how unmanned aerial systems and machine learning can be combined to address crop protection challenges. A recent 2015 study on insect damage in sorghum will illustrate the effectiveness of this methodology. A UAV platform equipped with a high-resolution camera was deployed to autonomously perform a flight pattern over the target area. We describe the image processing pipeline implemented to create a georeferenced orthoimage and visualize the spatial distribution of the damage. An image analysis tool has been developed to minimize human input requirements. The computer program is based on a machine learning algorithm that automatically creates a meaningful partition of the image into clusters. Results show the algorithm delivers decision boundaries that accurately classify the field into crop health levels. The methodology presented in this paper represents a venue for further research towards automated crop protection assessments in the cotton industry, with applications in detecting, quantifying and monitoring the presence of mealybugs, mites and aphid pests.