Calibration of structure in a distributed forecasting model for a semiarid flash flood: dynamic surface storage and channel roughness

Flash floods pose a significant danger for life and property. Unfortunately, in arid and semiarid environment the runoff generation shows a complex non-linear behavior with a strong spatial and temporal non-uniformity. As a result, the predictions made by physically-based simulations in semiarid areas are subject to great uncertainty, and a failure in the predictive behavior of existing models is common. Thus better descriptions of physical processes at the watershed scale need to be incorporated into the hydrological model structures. For example, terrain relief has been systematically considered static in flood modelling at the watershed scale. Here, we show that the integrated effect of small distributed relief variations originated through concurrent hydrological processes within a storm event was significant on the watershed scale hydrograph. We model these observations by introducing dynamic formulations of two relief-related parameters at diverse scales: maximum depression storage, and roughness coefficient in channels. In the final (a posteriori) model structure these parameters are allowed to be both time-constant or time-varying. The case under study is a convective storm in a semiarid Mediterranean watershed with ephemeral channels and high agricultural pressures (the Rambla del Albujón watershed; 556 km 2 ), which showed a complex multi-peak response. First, to obtain quasi-sensible simulations in the (a priori) model with time-constant relief-related parameters, a spatially distributed parameterization was strictly required. Second, a generalized likelihood uncertainty estimation (GLUE) inference applied to the improved model structure, and conditioned to observed nested hydrographs, showed that accounting for dynamic relief-related parameters led to improved simulations. The discussion is finally broadened by considering the use of the calibrated model both to analyze the sensitivity of the watershed to storm motion and to attempt the flood forecasting of a stratiform event with highly different behavior.

Using proxies to calculate the carbon impact of investment into electricity network assets

Replacement and upgrading of assets in the electricity network requires financial investment for the distribution and transmission utilities. The replacement and upgrading of network assets also represents an emissions impact due to the carbon embodied in the materials used to manufacture network assets. This paper uses investment and asset data for the GB system for 2015-2023 to assess the suitability of using a proxy with peak demand data and network investment data to calculate the carbon impacts of network investments. The proxies are calculated on a regional basis and applied to calculate the embodied carbon associated with current network assets by DNO region. The proxies are also applied to peak demand data across the 2015-2023 period to estimate the expected levels of embodied carbon that will be associated with network investment during this period. The suitability of these proxies in different contexts are then discussed, along with initial scenario analysis to calculate the impact of avoiding or deferring network investments through distributed generation projects. The proxies were found to be effective in estimating the total embodied carbon of electricity system investment in order to compare investment strategies in different regions of the GB network.

Electricity derivatives pricing with forward-looking information

In order to increase overall transparency on key operational information, power transmission system operators publish an increasing amount of fundamental data, including forecasts of electricity demand and available capacity. We employ a fundamental model for electricity prices which lends itself well to integrating such forecasts, while retaining ease of implementation and tractability to allow for analytic derivatives pricing formulae. In an extensive futures pricing study, the pricing performance of our model is shown to further improve based on the inclusion of electricity demand and capacity forecasts, thus confirming the general importance of forward-looking information for electricity derivatives pricing. However, we also find that the usefulness of integrating forecast data into the pricing approach is primarily limited to those periods during which electricity prices are highly sensitive to demand or available capacity, whereas the impact is less visible when fuel prices are the primary underlying driver to prices instead.

STABILITY ANALYSIS WITH APPLICATIONS OF A TWO-DIMENSIONAL DYNAMICAL SYSTEM ARISING FROM A STOCHASTIC MODEL FOR AN ASSET MARKET

We analyze the stability properties of equilibrium solutions and periodicity of orbits in a two-dimensional dynamical system whose orbits mimic the evolution of the price of an asset and the excess demand for that asset. The construction of the system is grounded upon a heterogeneous interacting agent model for a single risky asset market. An advantage of this construction procedure is that the resulting dynamical system becomes a macroscopic market model which mirrors the market quantities and qualities that would typically be taken into account solely at the microscopic level of modeling. The system`s parameters correspond to: (a) the proportion of speculators in a market; (b) the traders` speculative trend; (c) the degree of heterogeneity of idiosyncratic evaluations of the market agents with respect to the asset`s fundamental value; and (d) the strength of the feedback of the population excess demand on the asset price update increment. This correspondence allows us to employ our results in order to infer plausible causes for the emergence of price and demand fluctuations in a real asset market. The employment of dynamical systems for studying evolution of stochastic models of socio-economic phenomena is quite usual in the area of heterogeneous interacting agent models. However, in the vast majority of the cases present in the literature, these dynamical systems are one-dimensional. Our work is among the few in the area that construct and study analytically a two-dimensional dynamical system and apply it for explanation of socio-economic phenomena.

Techno-economic Appraisal of Concentrating Solar Power Systems (CSP)

The diffusion of Concentrating Solar Power Systems (CSP) systems is currently taking place at a much slower pace than photovoltaic (PV) power systems. This is mainly because of the higher present cost of the solar thermal power plants, but also for the time that is needed in order to build them. Though economic attractiveness of different Concentrating technologies varies, still PV power dominates the market. The price of CSP is expected to drop significantly in the near future and wide spread installation of them will follow. The main aim of this project is the creation of different relevant case studies on solar thermal power generation and a comparison betwwen them. The purpose of this detailed comparison is the techno-economic appraisal of a number of CSP systems and the understanding of their behaviour under various boundary conditions. The CSP technologies which will be examined are the Parabolic Trough, the Molten Salt Power Tower, the Linear Fresnel Mirrors and the Dish Stirling. These systems will be appropriatly sized and simulated. All of the simulations aim in the optimization of the particular system. This includes two main issues. The first is the achievement of the lowest possible levelized cost of electricity and the second is the maximization of the annual energy output (kWh). The project also aims in the specification of these factors which affect more the results and more specifically, in what they contribute to the cost reduction or the power generation. Also, photovoltaic systems will be simulated under same boundary conditions to facolitate a comparison between the PV and the CSP systems. Last but not leats, there will be a determination of the system which performs better in each case study.

Combined solar and pellet heating systems for single-family houses : How to achieve decreased electricity usage, increased system efficiency and increased solar gains

In Sweden, there are about 0.5 million single-family houses that are heated by electricity alone, and rising electricity costs force the conversion to other heating sources such as heat pumps and wood pellet heating systems. Pellet heating systems for single-family houses are currently a strongly growing market. Future lack of wood fuels is possible even in Sweden, and combining wood pellet heating with solar heating will help to save the bio-fuel resources. The objectives of this thesis are to investigate how the electrically heated single-family houses can be converted to pellet and solar heating systems, and how the annual efficiency and solar gains can be increased in such systems. The possible reduction of CO-emissions by combining pellet heating with solar heating has also been investigated. Systems with pellet stoves (both with and without a water jacket), pellet boilers and solar heating have been simulated. Different system concepts have been compared in order to investigate the most promising solutions. Modifications in system design and control strategies have been carried out in order to increase the system efficiency and the solar gains. Possibilities for increasing the solar gains have been limited to investigation of DHW-units for hot water production and the use of hot water for heating of dishwashers and washing machines via a heat exchanger instead of electricity (heat-fed appliances). Computer models of pellet stoves, boilers, DHW-units and heat-fed appliances have been developed and the parameters for the models have been identified from measurements on real components. The conformity between the models and the measurements has been checked. The systems with wood pellet stoves have been simulated in three different multi-zone buildings, simulated in detail with heat distribution through door openings between the zones. For the other simulations, either a single-zone house model or a load file has been used. Simulations were carried out for Stockholm, Sweden, but for the simulations with heat-fed machines also for Miami, USA. The foremost result of this thesis is the increased understanding of the dynamic operation of combined pellet and solar heating systems for single-family houses. The results show that electricity savings and annual system efficiency is strongly affected by the system design and the control strategy. Large reductions in pellet consumption are possible by combining pellet boilers with solar heating (a reduction larger than the solar gains if the system is properly designed). In addition, large reductions in carbon monoxide emissions are possible. To achieve these reductions it is required that the hot water production and the connection of the radiator circuit is moved to a well insulated, solar heated buffer store so that the boiler can be turned off during the periods when the solar collectors cover the heating demand. The amount of electricity replaced using systems with pellet stoves is very dependant on the house plan, the system design, if internal doors are open or closed and the comfort requirements. Proper system design and control strategies are crucial to obtain high electricity savings and high comfort with pellet stove systems. The investigated technologies for increasing the solar gains (DHW-units and heat-fed appliances) significantly increase the solar gains, but for the heat-fed appliances the market introduction is difficult due to the limited financial savings and the need for a new heat distribution system. The applications closest to market introduction could be for communal laundries and for use in sunny climates where the dominating part of the heat can be covered by solar heating. The DHW-unit is economical but competes with the internal finned-tube heat exchanger which is the totally dominating technology for hot water preparation in solar combisystems for single-family houses.

On Real-Time Monitoring And Control For Efficient Management Of Drinking Water Networks: Barcelona Case Study

Drinking water utilities in urban areas are focused on finding smart solutions facing new challenges in their real-time operation because of limited water resources, intensive energy requirements, a growing population, a costly and ageing infrastructure, increasingly stringent regulations, and increased attention towards the environmental impact of water use. Such challenges force water managers to monitor and control not only water supply and distribution, but also consumer demand. This paper presents and discusses novel methodologies and procedures towards an integrated water resource management system based on advanced ICT technologies of automation and telecommunications for largely improving the efficiency of drinking water networks (DWN) in terms of water use, energy consumption, water loss minimization, and water quality guarantees. In particular, the paper addresses the first results of the European project EFFINET (FP7-ICT2011-8-318556) devoted to the monitoring and control of the DWN in Barcelona (Spain). Results are split in two levels according to different management objectives: (i) the monitoring level is concerned with all the aspects involved in the observation of the current state of a system and the detection/diagnosis of abnormal situations. It is achieved through sensors and communications technology, together with mathematical models; (ii) the control level is concerned with computing the best suitable and admissible control strategies for network actuators as to optimize a given set of operational goals related to the performance of the overall system. This level covers the network control (optimal management of water and energy) and the demand management (smart metering, efficient supply). The consideration of the Barcelona DWN as the case study will allow to prove the general applicability of the proposed integrated ICT solutions and their effectiveness in the management of DWN, with considerable savings of electricity costs and reduced water loss while ensuring the high European standards of water quality to citizens.

The forward- and the equity-premium puzzles: two symptoms of the same illness?

Using information on US domestic financial data only, we build a stochastic discount factor—SDF— and check whether it accounts for foreign markets stylized facts that escape consumption based models. By interpreting our SDF as the projection of a pricing kernel from a fully specified model in the space of returns, our results indicate that a model that accounts for the behavior of domestic assets goes a long way toward accounting for the behavior of foreign assets prices. We address predictability issues associated with the forward premium puzzle by: i) using instruments that are known to forecast excess returns in the moments restrictions associated with Euler equations, and; ii) by pricing Lustig and Verdelhan (2007)’s foreign currency portfolios. Our results indicate that the relevant state variables that explain foreign-currency market asset prices are also the driving forces behind U.S. domestic assets behavior.

The forward- and the equity-premium puzzles: two symptoms of the same illness?

Using information on US domestic financial data only, we build a stochastic discount factor—SDF— and check whether it accounts for foreign markets stylized facts that escape consumption based models. By interpreting our SDF as the projection of a pricing kernel from a fully specified model in the space of returns, our results indicate that a model that accounts for the behavior of domestic assets goes a long way toward accounting for the behavior of foreign assets prices. We address predictability issues associated with the forward premium puzzle by: i) using instruments that are known to forecast excess returns in the moments restrictions associated with Euler equations, and; ii) by comparing this out-of-sample results with the one obtained performing an in-sample exercise, where the return-based SDF captures sources of risk of a representative set of developed and emerging economies government bonds. Our results indicate that the relevant state variables that explain foreign-currency market asset prices are also the driving forces behind U.S. domestic assets behavior.

The market strategies alternatives of an e-business start-up in Brazil

The e-business market is one of the fastest growing markets in Brazil, with e-business sales accounting for BRL 14.8 billion in 2010 and a growth of 40% per year (+1000% over the past 7 years). Sales-event clubs and collective bargaining websites are one of the most dynamic segments of the e-business market: the number of new players is increasing rapidly, with over 1200 collective bargaining websites currently operating in Brazil. In that context, growth and differentiation seem to be two key success factors for Coquelux. According to webshopper (23rd Edition, e-bit), growth can be achieved by targeting middle and low-income consumers from class C, who represent 50% of the total e-commerce sales. But Coquelux, which is specialized in desire and luxury brands, has built its reputation and competitive advantage through its “exclusivity”, by targeting wealthier consumers from classes A and B who are attracted by its fashionable and high-end positioning. The evolution (growth?) of this market and the development of its competition naturally raise a strategic question for Coquelux’s managers: can Coquelux grow and still maintain its competitive advantage? Should it grow by expanding its consumer base to class C? If so, how? Consumers from classes A, B or C must be targeted through the same online communication channels. Recent studies from the ABEP/ABIPEME emphasized the importance of social networks as a tool for converting new clients and gaining their loyalty, regardless of their social class. However, high-income and low-income e-consumers do not have the same consumption habits, do not respond to the same type of marketing strategies, and most importantly, do not share the same values. Thus, it seems difficult to expand Coquelux’s consumer base to class C without changing its marketing strategies and altering its image Three options were identified for Coquelux: reinforcing its leadership on the luxury segment and focusing on a small niche market (1), which would threaten its survival in the long run; completely changing its strategy and competing for a mass market through commercial brands (2), which requires major financial investments that managers don’t have access to; or finding an intermediary solution (3). This thesis’ recommendation for the third option consists in focusing on premium brands (rather than luxury) in order to increase sales volume (Coquelux’s most profitable sales happened with local desire brands) with products that appeal to class B but also attract the emerging class C which is looking for brand recognition. It could thus implement a slow entry strategy towards the mass market without damaging its main competitive advantage.

Market coupling in the power markets

The thesis analyses the European Unions’ effort to create an integrated pan-European electricity market based on “market coupling” as the proposed allocation mechanism for interconnector transfer capacity. Thus, the thesis’ main focus is if market coupling leads to a price convergence in interlinked markets and how it affects the behavior of electricity price data. The applied research methods are a qualitative, structured literature review and a quantitative analysis of electricity price data. The quantitative analysis relies on descriptive statistics of absolute price differentials and on a Cointegration analysis according to Engle & Granger (1987)’s two step approach. Main findings are that implicit auction mechanisms such as market coupling are more efficient than explicit auctions. Especially the method of price coupling leads to a price convergence in involved markets, to social welfare gains and reduces market power of producers, as shown on the example of the TLC market coupling. The market coupling initiative between Germany and Denmark, on the other hand, is evaluated as less successful and illustrates the complexity and difficulties of implementing market coupling initiatives. The cointegration analysis shows that the time series were already before the coupling date cointegrated, but the statistical significance increased. The thesis suggests that market coupling leads to a price convergence of involved markets and thus functions as method to create a single, integrated European electricity market.

Hedging options in a garch environment: testing the term structure of stochastic volatility models

This paper develops a methodology for testing the term structure of volatility forecasts derived from stochastic volatility models, and implements it to analyze models of S&P500 index volatility. U sing measurements of the ability of volatility models to hedge and value term structure dependent option positions, we fmd that hedging tests support the Black-Scholes delta and gamma hedges, but not the simple vega hedge when there is no model of the term structure of volatility. With various models, it is difficult to improve on a simple gamma hedge assuming constant volatility. Ofthe volatility models, the GARCH components estimate of term structure is preferred. Valuation tests indicate that all the models contain term structure information not incorporated in market prices.

Market timing as a motive for IPOs: evidence from IPOs of Japanese keiretsu firms

This paper examines the relevance of market timing as a motive for initial public offerings (IPOs) by comparing IPOs of firms that are members of Japanese keiretsu industrial groups with IPOs of independent Japanese firms. We argue that Japanese keiretsu-linked IPOs form a favorable sample to find evidence of the market timing motive. Instead, the data provide strong evidence for a restructuring motive and little evidence for market timing. We find that long run returns to keiretsu and independent IPOs are not negative, contrary to U.S. evidence, and are indistinguishable from each other; initial returns to keiretsu-linked IPOs are significantly higher than to independent firms; and a significant number of keiretsu IPO firms adjust their linkages with the group following the IPO, with both increases and decreases.

The market of academic journals : empirical evidence from data on French libraries

This paper analyzes the demand and cost structure of the French market of academic journals, taking into account its intermediary role between researchers, who are both producers and consumers of knowledge. This two sidedness feature will echoes similar problems already observed in electronic markets – payment card systems, video game console etc - such as the chicken and egg problem, where readers won’t buy a journal if they do not expect its articles to be academically relevant and researchers, that live under the mantra “Publish or Perish”, will not submit to a journal with either limited public reach or weak reputation. After the merging of several databases, we estimate the aggregated nested logit demand system combined simultaneously with a cost function. We identify the structural parameters of this market and find that price elasticities of demand are quite large and margins relatively low, indicating that this industry experiences competitive constraints.

Informational spillovers in the pre-1914 London sovereign debt market

We document a novel type of international financial contagion whose driving force is shared financial intermediation. In the London peripheral sovereign debt market during pre-1914 period financial intermediation played a major informational role to investors, most likely because of the absence of international monitoring agencies and the substantial agency costs. Using two events of financial distress – the Brazilian Funding Loan of 1898 and the Greek Funding Loan of 1893 – as quasi-natural experiments, we document that, following the crises, the bond prices of countries with no meaningful economic links to the distressed countries, but shared the same financial intermediary, suffered a reduction relative to the rest of the market. This result is true for the mean, median and the whole distribution of bond prices, and robust to an extensive sensitivity analysis. We interpret it as evidence that the identity of the financial intermediary was informative, i.e, investors extracted information about the soundness of a debtor based on the existence of financial relationships. This spillover, informational in essence, arises as the flip-side of the relational lending coin: contagion arises for the same reason why relational finance, in this case, underwriting, helps alleviate informational and incentive problems.