On-Chip All-Optical Passive 3.55 Gbit/s NRZ-to-PRZ Format Conversion Using a High-Q Silicon-Based Microring Resonator

We report the experimental result of all-optical passive 3.55 Gbit/s non-return-to-zero (NRZ) to pseudo-return-to-zero (PRZ) format conversion using a high-quality-factor (Q-factor) silicon-based microring resonator notch filter on chip. The silicon-based microring resonator has 23800 Q-factor and 22 dB extinction ratio (ER), and the PRZ signals has about 108 ps width and 4.98 dB ER.

The Named-State Register File

This thesis introduces the Named-State Register File, a fine-grain, fully-associative register file. The NSF allows fast context switching between concurrent threads as well as efficient sequential program performance. The NSF holds more live data than conventional register files, and requires less spill and reload traffic to switch between contexts. This thesis demonstrates an implementation of the Named-State Register File and estimates the access time and chip area required for different organizations. Architectural simulations of large sequential and parallel applications show that the NSF can reduce execution time by 9% to 17% compared to alternative register files.

Roll Project Job Shop scheduling benchmark problems.

This document describes two sets of benchmark problem instances for the job shop scheduling problem. Each set of instances is supplied as a compressed (zipped) archive containing a single CSV file for each problem instance using the format described in http://rollproject.org/jssp/jsspGen.pdf

ART: An ontology based tool for the translation of papers into Semantic Web format

To be presented at SIG/ISMB07 ontology workshop: http://bio-ontologies.org.uk/index.php To be published in BMC Bioinformatics. Sponsorship: JISC

AIDA-Based Distributed File System

This paper describes a prototype implementation of a Distributed File System (DFS) based on the Adaptive Information Dispersal Algorithm (AIDA). Using AIDA, a file block is encoded and dispersed into smaller blocks stored on a number of DFS nodes distributed over a network. The implementation devises file creation, read, and write operations. In particular, when reading a file, the DFS accepts an optional timing constraint, which it uses to determine the level of redundancy needed for the read operation. The tighter the timing constraint, the more nodes in the DFS are queried for encoded blocks. Write operations update all blocks in all DFS nodes--with future implementations possibly including the use of read and write quorums. This work was conducted under the supervision of Professor Azer Bestavros (best@cs.bu.edu) in the Computer Science Department as part of Mohammad Makarechian's Master's project.

On the Relationship Between File Sizes, Transport Protocols, and Self-Similar Network Traffic

Recent measurements of local-area and wide-area traffic have shown that network traffic exhibits variability at a wide range of scales self-similarity. In this paper, we examine a mechanism that gives rise to self-similar network traffic and present some of its performance implications. The mechanism we study is the transfer of files or messages whose size is drawn from a heavy-tailed distribution. We examine its effects through detailed transport-level simulations of multiple TCP streams in an internetwork. First, we show that in a "realistic" client/server network environment i.e., one with bounded resources and coupling among traffic sources competing for resources the degree to which file sizes are heavy-tailed can directly determine the degree of traffic self-similarity at the link level. We show that this causal relationship is not significantly affected by changes in network resources (bottleneck bandwidth and buffer capacity), network topology, the influence of cross-traffic, or the distribution of interarrival times. Second, we show that properties of the transport layer play an important role in preserving and modulating this relationship. In particular, the reliable transmission and flow control mechanisms of TCP (Reno, Tahoe, or Vegas) serve to maintain the long-range dependency structure induced by heavy-tailed file size distributions. In contrast, if a non-flow-controlled and unreliable (UDP-based) transport protocol is used, the resulting traffic shows little self-similar characteristics: although still bursty at short time scales, it has little long-range dependence. If flow-controlled, unreliable transport is employed, the degree of traffic self-similarity is positively correlated with the degree of throttling at the source. Third, in exploring the relationship between file sizes, transport protocols, and self-similarity, we are also able to show some of the performance implications of self-similarity. We present data on the relationship between traffic self-similarity and network performance as captured by performance measures including packet loss rate, retransmission rate, and queueing delay. Increased self-similarity, as expected, results in degradation of performance. Queueing delay, in particular, exhibits a drastic increase with increasing self-similarity. Throughput-related measures such as packet loss and retransmission rate, however, increase only gradually with increasing traffic self-similarity as long as reliable, flow-controlled transport protocol is used.

Improving the Performance of Overlay Routing and P2P File Sharing using Selfish Neighbor Selection

A foundational issue underlying many overlay network applications ranging from routing to P2P file sharing is that of connectivity management, i.e., folding new arrivals into the existing mesh and re-wiring to cope with changing network conditions. Previous work has considered the problem from two perspectives: devising practical heuristics for specific applications designed to work well in real deployments, and providing abstractions for the underlying problem that are tractable to address via theoretical analyses, especially game-theoretic analysis. Our work unifies these two thrusts first by distilling insights gleaned from clean theoretical models, notably that under natural resource constraints, selfish players can select neighbors so as to efficiently reach near-equilibria that also provide high global performance. Using Egoist, a prototype overlay routing system we implemented on PlanetLab, we demonstrate that our neighbor selection primitives significantly outperform existing heuristics on a variety of performance metrics; that Egoist is competitive with an optimal, but unscalable full-mesh approach; and that it remains highly effective under significant churn. We also describe variants of Egoist's current design that would enable it to scale to overlays of much larger scale and allow it to cater effectively to applications, such as P2P file sharing in unstructured overlays, based on the use of primitives such as scoped-flooding rather than routing.

Extending snBench to Support a Graphical Programming Interface for a Sensor Network Tasking Language (STEP)

The purpose of this project is the creation of a graphical "programming" interface for a sensor network tasking language called STEP. The graphical interface allows the user to specify a program execution graphically from an extensible pallet of functionalities and save the results as a properly formatted STEP file. Moreover, the software is able to load a file in STEP format and convert it into the corresponding graphical representation. During both phases a type-checker is running on the background to ensure that both the graphical representation and the STEP file are syntactically correct. This project has been motivated by the Sensorium project at Boston University. In this technical report we present the basic features of the software, the process that has been followed during the design and implementation. Finally, we describe the approach used to test and validate our software.

Coherent wavelength division multiplexing: a novel transmission format for high spectral density optical communication networks

In this thesis a novel transmission format, named Coherent Wavelength Division Multiplexing (CoWDM) for use in high information spectral density optical communication networks is proposed and studied. In chapter I a historical view of fibre optic communication systems as well as an overview of state of the art technology is presented to provide an introduction to the subject area. We see that, in general the aim of modern optical communication system designers is to provide high bandwidth services while reducing the overall cost per transmitted bit of information. In the remainder of the thesis a range of investigations, both of a theoretical and experimental nature are carried out using the CoWDM transmission format. These investigations are designed to consider features of CoWDM such as its dispersion tolerance, compatibility with forward error correction and suitability for use in currently installed long haul networks amongst others. A high bit rate optical test bed constructed at the Tyndall National Institute facilitated most of the experimental work outlined in this thesis and a collaboration with France Telecom enabled long haul transmission experiments using the CoWDM format to be carried out. An amount of research was also carried out on ancillary topics such as optical comb generation, forward error correction and phase stabilisation techniques. The aim of these investigations is to verify the suitability of CoWDM as a cost effective solution for use in both current and future high bit rate optical communication networks

A location-based communication platform: integrating file sharing with interpersonal contact

Gemstone Team FLIP (File Lending in Proximity)

Slicing issues in CAD translation to STL in rapid prototyping

The rapid prototyping (RP) process is being used widely with great potential for rapid manufacturing of functional parts. The RP process involves translation of the CAD file to STL format followed by slicing of the model into multiple horizontal layers, each of which is reproduced physically in making the prototype. The thickness of the resulting slices has a profound effect on the surface finish and build time of the prototype. The purpose of this paper is to show the effects of slice thickness on the surface finish, layering error, and build time of a prototype, as well as to show how an efficient STL file can be developed. Three objects were modeled and STL files were generated. One STL file for each object was sliced using different slice thicknesses, and the build times were obtained. Screenshots were used to show the slicing effect on layering error and surface finish and to demonstrate the means to a more efficient STL file. From the results, it is clear that the surface finish and build time are important factors that are affected by slice thickness