DETERMINATION OF THE E/G RATIO OF WOOD LOGS USING TRANSVERSE VIBRATION

The Bernoulli's model for vibration of beams is often used to make predictions of bending modulus of elasticity when using dynamic tests. However this model ignores the rotary inertia and shear. Such effects can be added to the solution of Bernoulli's equation by means of the correction proposed by Goens (1931) or by Timoshenko (1953). But to apply these corrections it is necessary to know the E/G ratio of the material. The objective of this paper is the determination of the E/G ratio of wood logs by adjusting the analytical solution of the Timoshenko beam model to the dynamic testing data of 20 Eucalyptus citriodora logs. The dynamic testing was performed with the logs in free-free suspension. To find the stiffness properties of the logs, the residue minimization was carried out using the Genetic Algorithm (GA). From the result analysis one can reasonably assume E/G = 20 for wood logs.

Relationship between elastic and mechanical properties of dental ceramics and their index of brittleness

The purpose of the study was to verify the effects of a number of materials' parameters (crystalline content; Young's modulus, E; biaxial flexure strength, sigma(i); Vickers hardness, VH; fracture toughness, K-Ic; fracture surface energy, gamma(f); and index of brittleness, B) on the brittleness of dental ceramics. Five commercial dental ceramics with different contents of glass phase and crystalline particles were studied: a vitreous porcelain (VM7/V), a porcelain with 16 vol% leucite particles (d.Sign/D), a glass-ceramic with 29 vol% leucite particles (Empress/E1), a glass-ceramic with 58 vol% lithium-disilicate needle-like particles (Empress 2/E2), and a glass-infiltrated alumina composite with 65 vol% crystals (In-Ceram Alumina/IC). Discs were constructed according to manufacturers' instructions, ground and polished to final dimensions (12 mm x 1.1 mm). Elastic constants were determined by ultrasonic pulse-echo method. sigma(i) was determined by piston-on-3-balls method in inert condition. VH was determined using 19.6 N load and K-Ic was determined by indentation strength method. gamma(f) was calculated from the Griffith-Irwin relation and B by the ratio of HV to K-Ic. IC and E2 showed higher values of sigma(i), E, K-Ic and gamma(f), and lower values of B compared to leucite-based glass-ceramic and porcelains. Positive correlations were observed for sigma(i) versus K-Ic, and K-Ic versus E-1/2, however, E did not show relationship with HV and B. The increase of crystalline phase content is beneficial to decrease the brittleness of dental ceramics by means of both an increase in fracture surface energy and a lowering in index of brittleness. (C) 2012 Elsevier Ltd and Techna Group Sri. All rights reserved.

Subcritical crack growth and in vitro lifetime prediction of resin composites with different filler distributions

Objectives. Verify the influence of different filler distributions on the subcritical crack growth (SCG) susceptibility, Weibull parameters (m and sigma(0)) and longevity estimated by the strength-probability-time (SPT) diagram of experimental resin composites. Methods. Four composites were prepared, each one containing 59 vol% of glass powder with different filler sizes (d(50) = 0.5; 0.9; 1.2 and 1.9 mu m) and distributions. Granulometric analyses of glass powders were done by a laser diffraction particle size analyzer (Sald-7001, Shimadzu, USA). SCG parameters (n and sigma(f0)) were determined by dynamic fatigue (10(-2) to 10(2) MPa/s) using a biaxial flexural device (12 x 1.2 mm; n = 10). Twenty extra specimens of each composite were tested at 10(0) MPa/s to determine m and sigma(0). Specimens were stored in water at 37 degrees C for 24 h. Fracture surfaces were analyzed under SEM. Results. In general, the composites with broader filler distribution (C0.5 and C1.9) presented better results in terms of SCG susceptibility and longevity. C0.5 and C1.9 presented higher n values (respectively, 31.2 +/- 6.2(a) and 34.7 +/- 7.4(a)). C1.2 (166.42 +/- 0.01(a)) showed the highest and C0.5 (158.40 +/- 0.02(d)) the lowest sigma(f0) value (in MPa). Weibull parameters did not vary significantly (m: 6.6 to 10.6 and sigma(0): 170.6 to 176.4 MPa). Predicted reductions in failure stress (P-f = 5%) for a lifetime of 10 years were approximately 45% for C0.5 and C1.9 and 65% for C0.9 and C1.2. Crack propagation occurred through the polymeric matrix around the fillers and all the fracture surfaces showed brittle fracture features. Significance. Composites with broader granulometric distribution showed higher resistance to SCG and, consequently, higher longevity in vitro. (C) 2012 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Porcelain monolayers and porcelain/alumina bilayers reinforced by Al2O3/GdAlO3 fibers

Aim. This work tested the effect of the addition of Al2O3/GdAlO3 longitudinal fibers in different contents to veneering porcelain of two dental all ceramic systems. Methods: Fibers (0.5 mm diameter) obtained by the Laser Heated Pedestal Growth (LHPG) method were added to bar-shaped specimens made by veneer porcelain (monolayers) or both the veneer and the core ceramic (bilayers) of two all-ceramic systems: In-Ceram Alumina - glass infiltrated alumina composite (GIA) and In-Ceram 2000 AL Cubes - alumina polycrystal (AP) (VITA Zahnfabrik). The longitudinal fibers were added to veneering porcelain (VM7) in two different proportions: 10 or 17 vol%. The bars were divided into nine experimental conditions (n = 10) according to material used: VM7 porcelain monolayers, VM7/GIA, VM7/AP; and according to the amount of fibers within the porcelain layer: no fibers, 10 vol% or 17 vol%. After grinding and polishing the specimens were submitted to a three point bending test (crosshead speed = 0.5 mm/min) with porcelain positioned at tensile side. Data were analyzed by means of one-way ANOVA and a Tukey's test (alpha = 5%). Scanning electronic microscopy (SEM) was conducted for fractographic analysis. Results. Regarding the groups without fiber addition, VM7/AP showed the highest flexural strength (MPa), followed by VM7/GIA and VM7 monolayers. The addition of fibers led to a numerical increase in flexural strength for all groups. For VM7/GIA bilayers the addition of 17 vol% of fibers resulted in a significant 48% increase in the flexural strength compared to the control group. Fractographic analysis revealed that the crack initiation site was in porcelain at the tensile surface. Cracks also propagated between fibers before heading for the alumina core. Conclusions. The addition of 17 vol% of Al2O3/GdAlO3 longitudinal fibers to porcelain/glass infiltrated alumina bilayers significantly improved its flexural strength. 10 vol% or 17 vol% of fibers inclusion increased the flexural strength for all groups. (C) 2011 Elsevier Ltd. All rights reserved.

Gender characterization in a large series of Brazilian patients with spondyloarthritis

An increasing number of women have been diagnosed with spondyloarthritis (SpA) in recent decades. While a few studies have analyzed gender as a prognostic factor of the disease, no studies have addressed this matter with a large number of patients in South America, which is a peculiar region due to its genetic heterogeneity. The aim of the present study was to analyze the influence of gender on disease patterns in a large cohort of Brazilian patients with SpA. A prospective study was carried out involving 1,505 patients [1,090 males (72.4%) and 415 females (27.6%)] classified as SpA according to the European Spondyloarthropaties Study Group criteria who attended at 29 reference centers for rheumatology in Brazil. Clinical and demographic variables were recorded and the following disease indices were administered: Bath Ankylosing Spondylitis Disease Activity Index (BASDAI), Bath Ankylosing Spondylitis Functional Index (BASFI), Bath Ankylosing Spondylitis Radiologic Index (BASRI), Maastricht Ankylosing Spondylitis Enthesitis Score (MASES), and Ankylosing Spondylitis Quality of Life (ASQoL). Ankylosing spondylitis (AS) was the most frequent disease in the group (65.4%), followed by psoriatic arthritis (18.4%), undifferentiated SpA (6.7%), reactive arthritis (3.3%), arthritis associated to inflammatory bowel disease (3.2%), and juvenile SpA (2.9%). The male-to-female ratio was 2.6:1 for the whole group and 3.6:1 for AS. The females were older (p<0.001) and reported shorter disease duration (p=0.002) than the male patients. The female gender was positively associated to peripheral SpA (p<0.001), upper limb arthritis (p<0.001), dactylitis (p=0.011), psoriasis (p<0.001), nail involvement (p<0.001), and family history of SpA (p=0.045) and negatively associated to pure axial involvement (p< 0.001), lumbar inflammatory pain (p=0.042), radiographic sacroiliitis (p<0.001), and positive HLA-B27 (p=0.001). The number of painful (p<0.001) and swollen (p=0.006) joints was significantly higher in the female gender, who also achieved higher BASDAI (p<0.001), BASFI (p=0.073, trend), MASES (p=0.019), ASQoL (p=0.014), and patient's global assessment (p=0.003) scores, whereas the use of nonsteroidal anti-inflammatory drugs (p<0.001) and biological agents (p=0.003) was less frequent in the female gender. Moreover, BASRI values were significantly lower in females (p<0.001). The female gender comprised one third of SpA patients in this large cohort and exhibited more significant peripheral involvement and less functional disability, despite higher values in disease indices.

Rice husk derived waste materials as partial cement replacement in lightweight concrete

In this study rice husk ash (RHA) and broiler bed ash from rice husk (BBA), two agricultural waste materials, have been assessed for use as partial cement replacement materials for application in lightweight concrete. Physical and chemical characteristics of RHA and BBA were first analyzed. Three similar types of lightweight concrete were produced, a control type in which the binder was just CEMI cement (CTL) and two other types with 10% cement replacement with, respectively, RHA and BBA. All types of similar lightweight concrete were prepared to present the same workability by adjusting the amount of superplasticizer. Properties of concrete investigated were compressive and flexural strength at different ages, absorption by capillarity, resistivity and resistance to chloride ion penetration (CTH method) and accelerated carbonation. Test results obtained for 10% cement replacement level in lightweight concrete indicate that although the addition of BBA conducted to lower performance in terms of the degradation indicative tests, RHA led to the enhancement of mechanical properties, especially early strength and also fast ageing related results, further contributing to sustainable construction with energy saver lightweight concrete.

Materials prepared from biopolyethylene and curaua fibers: Composites from biomass

Composites of high-density biopolyethylene (HDBPE) obtained from ethylene derived from sugarcane ethanol and curaua fibers were formed by first mixing in an internal mixer followed by thermopressing. Additionally, hydroxyl-terminated polybutadiene (LHPB), which is usually used as an impact modifier, was mainly used in this study as a compatibilizer agent. The fibers, HDBPE and LHPB were also compounded using an inter-meshing twin-screw extruder and, subsequently, injection molded. The presence of the curaua fibers enhanced some of the properties of the HDBPE, such as its flexural strength and storage modulus. SEM images showed that the addition of LHPB improved the adhesion of the fiber/matrix at the interface, which increased the impact strength of the composite. The higher shear experienced during processing probably led to a more homogeneous distribution of fibers, making the composite that was prepared through extruder/injection molding more resistant to impact than the composite processed by the internal mixer/thermopressing. (c) 2012 Elsevier Ltd. All rights reserved.

Treatment With Methotrexate Inhibits Atherogenesis in Cholesterol-Fed Rabbits

A decrease in the number of cardiovascular events in patients with rheumatoid arthritis or psoriasis treated with methotrexate (MTX) has been observed in the literature. The aim of this study was to test whether MTX could promote anti-inflammatory effects and reduce the atherosclerotic lesions in rabbits with atherosclerosis induced by cholesterol feeding. Twenty male New Zealand rabbits were fed a 1% cholesterol diet for 60 days. Starting from day 30 of cholesterol feeding, 10 animals were treated with 4 weekly intravenous injections of MTX (4 mg/kg) and 10 with 4 weekly saline solution injections for 30 days. MTX reduced the size of the lesion areas of cholesterol-fed animals by 75% and intima-media ratio 2- fold. The drug inhibited macrophage migration into the intima by 50% and the presence of apoptotic cells by 84% but did not inhibit the intimal proliferation of smooth muscle cells. MTX treatment also diminished the positive staining area of metalloproteinase 9 in the intima, which is probably beneficial. In the tumor necrosis factor-alpha-treated human umbilical vein endothelial cell line, incubation with MTX led to downregulation of 5 pro-inflammatory genes, TNF-alpha, VAP-1, IL-1 beta, CXCL2, and TLR2, and upregulation of the antiinflammatory TGF-beta 1 gene, thus showing endothelium-protective properties. In conclusion, MTX showed direct in vivo anti-atherosclerotic action and may have potential in the treatment of this disorder.

Effect of age at disease onset in the clinical profile of spondyloarthritis: a study of 1424 Brazilian patients

Objectives To analyse demographic and clinical variables in patients with disease onset before and after 40, 45 and 50 years in a large series of Brazilian SpA patients. Methods A common protocol of investigation was prospectively applied to 1424 SpA patients in 29 centres distributed through the main geographical regions in Brazil. The mean age at disease onset was 28.56 +/- 12.34 years, with 259 patients (18.2%) referring disease onset after 40 years, 15.1 (10.6%) after 45 years and 81 (5.8%) after 50 years. Clinical and demographic variables and disease indices (BASDAI, BASFI, BASRI, MASES, ASQoL) were investigated. Ankylosing spondylitis was the most frequent disease (66.3%), followed by psoriatic arthritis (18%), undifferentiated SpA (6.7%), reactive arthritis (5.5%), and enteropathic arthritis (3.5%). Results Comparing the groups according to age of disease onset, those patients with later onset presented statistical association with female gender, peripheral arthritis, dactylitis, nail involvement and psoriasis, as well as negative statistical association with inflammatory low hack pain, alternating buttock pain, radiographic sacroiliitis, hip involvement, positive familial history, HLA-B27 and uveitis. BASDAI, BASFI and quality of life, as well as physicians and patient's global assessment, were similar in all the groups. Radiographic indices showed worse results in the younger age groups. Conclusion There are two different clinical patterns in SpA defined by age at disease onset: one with predominance of axial symptoms in the group with disease onset <= 40 years and another favouring the peripheral manifestations in those with later disease onset.

The influence of rifting on escarpment migration on high elevation passive continental margins

Using numerical models that couple surface processes, flexural isostasy, faulting and the thermal effects of rifting, we show that fault-bounded escarpments created at rift flanks by mechanical unloading and flexural rebound have little potential to "survive" as retreating escarpments if the lower crust under the rift flank is substantially stretched. In this configuration, a drainage divide that persists through time appears landward of the initial escarpment in a position close to a secondary bulge that is created during the rifting event at a distance that depends on the flexural rigidity of the upper crust. Moreover, the migration of the escarpment to the secondary bulge occurs when the pre-rift topography dips landward, otherwise the evolution of the escarpment is guided by the pre-existing inland drainage divide. To illustrate this new mechanism for the evolution of passive margins, we study the examples of Southeastern Australia and Southeastern Brazil. We propose that a pre-existing inland drainage divide with rift related flank uplift can produce the double drainage divide observed in Southeastern Australia. On the other hand, we conclude that it is possible that the Serra do Mar escarpments on the Southeastern Brazilian margin originated as a secondary flexural bulge during rifting that persisted through time. In both cases, the retreating escarpment scenario is unlikely and the present-day margin morphology can be explained as resulting from rift-related vertical motions alone, without requiring significant post-rift "rejuvenation".

Evaluation of Chemical Treatment on Zirconia Surface with Two Primer Agents and an Alkaline Solution on Bond Strength

Objectives: This study evaluated the effect of an alkaline solution and two 10-methacryloyloxydecyl dihydrogen phosphate (MDP)-based primer agents on bond strength to zirconia (yttria-stabilized tetragonal zirconium polycrystal [Y-TZP]) through the shear bond strength (SBS) test. Materials and Methods: Sixty square-shaped Y-TZP samples were embedded in an acrylic resin mold, polished, and randomly assigned to one of six groups (n=10) according to treatment surface: group CR, no treatment (control); group NaOH, 0.5 M NaOH; group AP, Alloy Primer; group ZP, Z-Primer Plus; group NaOH-AP, 0.5 M NaOH + Alloy Primer; and group NaOH-ZP, 0.5 M NaOH + Z-Primer Plus. The resin cement (Rely X U100) was applied inside a matrix directly onto the Y-TZP surface, and it was light-cured for 40 seconds. The samples were stored in distilled water at 37 C for 24 hours prior to the test, which was performed in a universal machine at a crosshead-speed of 0.5 mm/min. The data were analyzed by one-way analysis of variance and Tukey tests (p<0.05). Light stereomicroscopy and scanning electron microscopy were used to assess the surface topography and failure mode. Results: The SBS was significantly affected by the chemical treatment (p<0.0001). The AP group displayed the best results, and the use of NaOH did not improve SBS results relative to either AP or ZP. The samples treated with Alloy Primer displayed mainly mixed failures, whereas those conditioned with Z-Primer Plus or with 0.5 M NaOH presented a balanced distribution of adhesive and mixed failure modes. Conclusions: The use of a NaOH solution may have modified the reactivity of the Y-TZP surface, whereas the employment of a MDP/6-4-vinylbenzyl-n-propyl amino-1,3,5-triazine2,4-dithione-based primer enhanced the Y-TZP bond strength.

Composites from a forest biorefinery byproduct and agrofibers: Lignosulfonate-phenolic type matrices reinforced with sisal fibers

The replacement of phenol with sodium lignosulfonate and formaldehyde with glutaraldehyde in the preparation of resins resulted in a new resol-type phenolic resin, sodium lignosulfonate-glutaraldehyde resin, in addition to sodium lignosulfonate-formaldehyde and phenol-formaldehyde resins. These resins were then used to prepare thermosets and composites reinforced with sisal fibers. Different techniques were used to characterize raw materials and/or thermosets and composites, including inverse gas chromatography, thermogravimetric analysis, and mechanical impact and flexural tests. The substitution of phenol by sodium lignosulfonate in the formulation of the composite matrices increased the impact strength of the respective composites from approximately 400 Jm(-1) to 800 J m(-1) and 1000 J m(-1), showing a considerable enhancement from the replacement of phenol with sodium lignosulfonate. The wettability of the sisal fibers increased when the resins were prepared from sodium lignosulfonate, generating composites in which the adhesion at the fiber-matrix interface was stronger and favored the transference of load from the matrix to the fiber during impact. Results suggested that the composites experienced a different mechanism of load transfer from the matrix to the fiber when a bending load was applied, compared to that experienced during impact. The thermogravimetric analysis results demonstrated that the thermal stability of the composites was not affected by the use of sodium lignosulfonate as a phenolic-type reagent during the preparation of the matrices.

Ethnic Influence in Clinical and Functional Measures of Brazilian Patients with Spondyloarthritis

Objective. Spondyloarthritides (SpA) can present different disease spectra according to ethnic background. The Brazilian Registry of Spondyloarthritis (RBE) is a nationwide registry that comprises a large databank on clinical, functional, and treatment data on Brazilian patients with SpA. The aim of our study was to analyze the influence of ethnic background in SpA disease patterns in a large series of Brazilian patients. Methods. A common protocol of investigation was prospectively applied to 1318 SpA patients in 29 centers distributed through the main geographical regions in Brazil. The group comprised whites (65%), African Brazilians (31.3%), and people of mixed origins (3.7%). Clinical and demographic variables and various disease index scores were compiled. Ankylosing spondylitis (AS) was the most frequent disease in the group (65.1%); others were psoriatic arthritis (18.3%), undifferentiated SpA (6.8%), enteropathic arthritis (3.7%), and reactive arthritis (3.4%). Results. White patients were significantly associated with psoriasis (p = 0.002), positive HLA-B27 (p = 0.014), and use of corticosteroids (p < 0.0001). Hip involvement (p = 0.02), axial inflammatory pain (p = 0.04), and radiographic sacroiliitis (p = 0.025) were associated with African Brazilian descent. Sex distribution, family history, and presence of peripheral arthritis, uveitis, dactylitis, urethritis, and inflammatory bowel disease were similar in the 3 groups, as well as age at disease onset, time from first symptom until diagnosis, and use of anti-tumor necrosis factor-a agents (p > 0.05). Schober test and thoracic expansion were similar in the 3 groups, whereas African Brazilians had higher Maastricht Ankylasing Spondylitis Enthesitis Scores (p = 0.005) and decreased lateral lumbar flexion (p = 0.003), while whites had a higher occiput-to-wall distance (p = 0.02). African Brazilians reported a worse patient global assessment of disease (p = 0.011). Other index scores and prevalence of work incapacity were similar in the 3 groups, although African Brazilians had worse performance in the Ankylosing Spondylitis Quality of Life questionnaire (p < 0.001). Conclusion. Ethnic background is associated with distinct clinical aspects of SpA in Brazilian patients. African Brazilian patients with SpA have a poorer quality of life and report worse disease compared to whites, (First Release Nov 1 2011; J Rheumatol 2012;39:141-7; doi:10.3899/jrheum.110372)

Formation and stability of oil-in-water nanoemulsions containing rice bran oil: in vitro and in vivo assessments

Abstract Background Nanoemulsions have practical application in a multitude of commercial areas, such as the chemical, pharmaceutical and cosmetic industries. Cosmetic industries use rice bran oil in sunscreen formulations, anti ageing products and in treatments for skin diseases. The aim of this study was to create rice bran oil nanoemulsions using low energy emulsification methods and to evaluate their physical stability, irritation potential and moisturising activity on volunteers with normal and diseased skin types. Results The nanoemulsion developed by this phase diagram method was composed of 10% rice bran oil, 10% surfactants sorbitan oleate/PEG-30 castor oil, 0.05% antioxidant and 0.50% preservatives formulated in distilled water. The nanoemulsion was stable over the time course of this study. In vitro assays showed that this formulation has a low irritation potential, and when applied to human skin during in vivo studies, the nanoemulsion improved the skin's moisture and maintained normal skin pH values. Conclusion The results of irritation potential studies and in vivo assessments indicate that this nanoemulsion has potential to be a useful tool to treat skin diseases, such as atopic dermatitis and psoriasis.

Brazilian blood donation eligibility criteria for dermatologic patients

A focused and commented review on the impact of dermatologic diseases and interventions in the solidary act of donating blood is presented to dermatologists to better advise their patients. This is a review of current Brazilian technical regulations on hemotherapeutic procedures as determined by Ministerial Directive #1353/2011 by the Ministry of Health and current internal regulations of the Hemotherapy Center of Ribeirão Preto, a regional reference center in hemotherapeutic procedures. Criteria for permanent inaptitude: autoimmune diseases (>1 organ involved), personal history of cancer other than basal cell carcinoma, severe atopic dermatitis or psoriasis, pemphigus foliaceus, porphyrias, filariasis, leprosy, extra pulmonary tuberculosis or paracoccidioidomycosis, and previous use of etretinate. Drugs that impose temporary ineligibility: other systemic retinoids, systemic corticosteroids, 5-alpha-reductase inhibitors, vaccines, methotrexate, beta-blockers, minoxidil, anti-epileptic, and anti-psychotic drugs. Other conditions that impose temporary ineligibility: occupational accident with biologic material, piercing, tattoo, sexually transmitted diseases, herpes, and bacterial infections, among others. Discussion: Thalidomide is currently missing in the teratogenic drugs list. Although finasteride was previously considered a drug that imposed permanent inaptitude, according to its short halflife current restriction of 1 month is still too long. Dermatologists should be able to advise their patients about proper timing to donate blood, and discuss the impact of drug withdrawal on treatment outcomes and to respect the designated washout periods.