899 resultados para Economies of density
Resumo:
Benefits and costs of dispersal and philopatry of the social plateau pika (Ochotona curzoniae) were studied on the Tibetan plateau for 3 years. Although short-lived, plateau pikas live in cohesive family groups that occupy burrow systems in sedge meadow habitat Most (57.8%) plateau pikas were philopatric, and dispersal movements were extremely restricted. No juvenile females or adult pikas moved more than two family ranges between years; the greatest observed dispersal distances were by two juvenile males that moved five family ranges from the family of their birth. Traversing unfamiliar habitat was not a cost of pika dispersal because most dispersers settled in families that they could easily visit before dispersal. Dispersal movements appeared to result in equalization of density among pika families, an expected result if competition for environmental resources influenced dispersal. Males did not disperse to gain advantages in competition for mates, as evidenced by their moving to families with significantly fewer females. Females, however, moved to families with significantly more males. Males provide abundant paternal care, and significantly more offspring per female survived to become adults from families with more adult males per adult female. Evidence concerning the influence of inbreeding avoidance on natal dispersal was indirect. Some males exhibited natal philopatry; thus some families had opportunity for close inbreeding. Males and females that dispersed had no opposite-sex relatives in their new families. Philopatric pikas may have benefited by remaining in families that exhibited low local densities, and philopatric females might have benefited from social cooperation with relatives.
Resumo:
In the engineering reinforcement of-rock and soil mass, engineers must consider how to obtain better reinforcing effect at the cost of less reinforcing expense, which, in fact, is the aim of reinforcement design. In order to accomplish the purpose, they require not only researching the material used to reinforce and its structure, but also taking into account of several important geological factors, such as the structure and property of rock and soil mass. How to improve the reinforcing effect according to engineering geomechanical principle at the respect of the reinforcement of engineering soil and rock mass is studied and discussed in this paper. The author studies the theory, technology and practice of geotechnical reinforcement based on engineering geomechanics, taking example for the soil treatment of Zhengzhou Airport, the effect analysis of reinforcement to the slope on the left bank of Wuqiangxi Hydropower Station and the reinforcing design of the No. 102 Landslide and unique sand-slide slope on the Sichuan-Tibet Highway. The paper is comprised of two parts for the convenience of discussion. In the first part, from the first chapter to the fifth chapter, trying to perform the relevant research and application at the viewpoint of soil mass engineering geomechanics, the author mainly discusses the study of reinforcing soft ground soil through dynamical consolidation and its application. Then, in the second part, from the sixth chapter to the eleventh chapter, the study of new technologies in the rock slope reinforcement and their application are discussed. The author finds that not only better reinforcing effect can be gained in the research where the principle and method of rock mass engineering geomechanics is adopted, but also new reinforcing technologies can be put forward. Zhengzhou Airport is an important one in central plains. It lies on Yellow River alluvial deposit and the structure of stratum is complex and heterogeneous. The area of airport is very large, which can result in differential settlement easily, damage of airport and aircraft accident, whereas, there are no similar experiences to dispose the foundation, so the foundation treatment become a principal problem. During the process of treatment, the method of dynamic compaction was adopted after compared with other methods using the theory of synthetic integration. Dynamic compaction is an important method to consolidate foundation, which was successfully used in the foundation of Zhengzhou Airport. For fill foundation, controlling the thickness of fill so as to make the foundation treatment can reach the design demand and optimum thickness of the fill is a difficult problem. Considering this problem, the author proposed a calculation method to evaluate the thickness of fill. The method can consider not only the self-settlement of fill but also the settlement of the ground surface under applied load so as to ensure the settlement occurred during the using period can satisfy the design demand. It is proved that the method is correct after using it to choose reasonable energy of dynamic compaction to treat foundation. At the same time, in order to examine the effect of dynamic compaction, many monitor methods were adopted in the test such as static loading test, modulus of resilience test, deep pore pressure -test, static cone penetration test and the variation of the pore volume measurement. Through the tests, the author summarized the discipline of the accumulation and dissipation of pore pressure in Yellow River alluvial deposit under the action of dynamic compaction, gave a correct division of the property change of silt and clay under dynamic compaction, determined the bearing capacity of foundation after treatment and weighted the reinforcing effect of dynamic consolidation from the variation of the soil particle in microcosmic and the parameter of soil mass' density. It can be considered that the compactness of soil is in proportion to the energy of dynamic compaction. This conclusion provided a reference to the research of the "Problem of Soil Structure-the Central Problem of Soil Mechanics in 21 Century ". It is also important to strengthen rock mass for water conservancy and electric power engineering. Slip-resistance pile and anchoring adit full of reinforced concrete are usually adopted in engineering experience to strengthen rock mass and very important for engineering. But there also some deficiency such as the weakest section can't be highlighted, the monitor is inconvenient and the diameter of pile and adit is very large etc. The author and his supervisor professor Yangzhifa invented prestressed slip-resistance pile and prestressed anchoring adit full of reinforced concrete, utilizing the advantage that the prestressed structure has better anti-tensile characteristic (this invention is to be published). These inventions overcome the disadvantages of general slip-resistance pile and anchoring adit full of reinforced concrete and have the functions of engineering prospecting, strengthening, drainage and monitor simultaneous, so they have better strengthened effect and be more convenient for monitor and more economical than traditional methods. Drainage is an important factor in treatments of rock mass and slop. In view of the traditional drainage method that drainage pore often be clogged so as to resulted in incident, professor Yangzhifa invented the method and setting of guide penetration by fiber bundle. It would take good effect to use it in prestressed slip-resistance pile and anchoring adit full of reinforced concrete. In this paper, the author took example for anchoring adit full of reinforced concrete used to strengthen Wuqiangxi left bank to simulate the strengthened effect after consolidated by prestressed slip-resistance pile, took example for 102 landslide occurred along Sichuan-Tibet highway to simulate the application of slip-resistance pile and the new technology of drainage. At the same time the author proposed the treatment method of flowing sand in Sichuan-Tibet highway, which will benefit the study on strengthening similar engineering. There are five novelties in the paper with the author's theoretical study and engineering practice: 1. Summarizing the role of pore water pressure accumulation and dissipation of the Yellow River alluvial and diluvial soil under the action of dynamical consolidation, which has instructive significance in the engineering construction under the analogical engineering geological conditions in the future. It has not been researched by the predecessors. 2. Putting forward the concept of density D in microcosmic based on the microcosmical structure study of the soil sample. Adopting D to weight the reinforcing effect of dynamic consolidation is considered to be appropriate by the means of comparing the D values of Zhengzhou Airport's ground soil before with after dynamically consolidating reinforcement, so a more convenient balancing method can be provided for engineering practice. 3. According to the deep research into the soil mass engineering geology, engineering rock and soil science, soil mechanics, as well as considerable field experiments, improving the consolidating method in airport construction, from the conventional method, which is dynamically compactmg original ground surface firstly, then filling soil and dynamically layer-consolidating or layer-compacting at last to the upgraded method, which is performing dynamical consolidation after filling soil to place totally at the extent of the certain earth-filling depth. The result of the dynamical consolidation not only complies with the specifications, but also reduces the soil treatment investment by 10 million RMB. 4. Proposing the method for calculating the height of the filled soil by the means of estimating the potential displacement produced in the original ground surface and the filled earth soil under the possible load, selecting the appropriate dynamically-compacting power and determining the virtual height of the filled earth soil. The method is proved to be effective and scientific. 5. According to the thought of Engineering Geomechanics Metal-Synthetic Methodology (EGMS), patenting two inventions (to the stage of roclamation, with Professor Yang Zhi-fa, the cooperative tutor, and etc.) in which multi-functions, engineering geological investigation, reinforcement, drainage and strength remedy, are integrated all over in one body at the viewpoint of the breakage mechanism of the rock slope.
Resumo:
Many multinational companies are supposedly viewing Europe as one region and re-shaping their approach to the supply of products to customers. Several factors are thought to be driving this trend, notably the degree of merger and acquisitions activity; the need for improved financial performance; the pressure to reduce inventories and costs, facilitated by improvements in communication and information technology systems. All of this is in the context of European market and monetary harmonisation. This paper investigates the extent and effect of the amanegement of supply chains on a pan-European baisis by multinational business. A survey was used to examine changes, both made and anticipated. to operational strategies, processes, organisational structures and physical infrastructure across a range of businesses and industry sectors. Cost reducation, driven by the need for profit and shreholder return, was found to be the priority for developments in supply chains.Many businesses reported consolidation of manufacturing and distribution activities whilst retaining discrete country-by-country organisational structures for managing customers and markets.Logistics Service Providers were seen in a traditional role as suppliers of commodity warehousing and transport services and lacked true pan-European capability. Despite the often-vaunted concept of a pan-European business model, individual businesses wwere seen to be negotiating their own path to balancing economies of scale with customers' service needs and expectations.
Resumo:
Celem niniejszego artykułu jest podsumowanie najnowszych wyników badań analizujących rolę systemu podatkowego w kolejnych fazach kryzysu zapoczątkowanego w 2008 r. Przeprowadzona w opracowaniu analiza wskazuje, że jego rola ulegała istotnym zmianom: 1) przed wybuchem kryzysu stwarzał bodźce do takich zachowań podmiotów gospodarczych, które przyczyniały się do narastania nierównowagi leżącej u podstaw kryzysu; 2) po jego wybuchu wzrosło znaczenie stabilizacyjne systemu podatkowego: zarówno w obszarze oddziaływania tak zwanych automatycznych stabilizatorów, jak i dyskrecjonalnych zmian obciążeń podatkowych; 3) obecnie zmiany systemu podatkowego zmierzają w kierunku wsparcia procesu konsolidacji fiskalnej oczekiwanej w najbliższych latach w wielu gospodarkach rozwiniętych i w części krajów rozwijających się.
Resumo:
The aim of the studies in the Perznica River catchment were relief changes caused by the development of transportation infrastructure. This type of transformation is dependable on the state of economy and the settlements. The development of transportation network in the last two hundred years was examined through the analysis of archival cartographic materials – maps from the years 1789, 1855, 1877, 1935 – and the comparison with the situation from mid 1980s. The Perznica River catchment has an area of 249 km2 and it is located in north-western Poland in the central part of the Drawskie Lakeland macroregion, which belongs to the West Pomeranian Lakeland. The heterogeneous Perznica River catchment relief has a denivelation of 159 m and is within 60 and 219 m a.s.l. The study area is within the Parsęta River lobe. A number of subzones, whose morphological diversity and diversity of sediments lithofacies is mainly a reflection of areal deglaciation of the continental ice-sheet marginal zone, has been distinguished and these are: • subzone of the internal kame moraine – the undulated moraine upland, diversified by kame forms and kettle holes, • subzone of ice-free space forms – the uplands of kame plateaux, • subzone of melt-out lake basins – Lake Wielatowo basin with a characteristic collar ridge, • morphological levels of the northern Pomeranian sloping surface – mainly flat moraine uplands and small outwashes. The economic development of the Perznica River catchment advanced in close connection with the physical and geographical context, mainly with the relief, soils and hydrological conditions. As a result, the flat moraine uplands and marginal outflow plains, which were easiest to cultivate, have been developed and populated faster than any other. Since the early medieval period, large, compact villages, often centered around big estates, were emerging in those areas. In areas with a high relief energy–kame-melt moraines, ice-free space forms and ridges around melt-out lake basins–farming entered on a larger scale from the eighteenth century. Scattered settlements in those areas forced the creation of a dense access road network to farms and fields. In the case of anthropogenic forms of transportation with denivelation exceeding 1 m in the study area, road excavations are present for 37.3 km, road undercuttings for 43.8 km and road embankments for 38.7 km in total length. That gives a high ratio of density of such forms, equal to 2.1 km per km–2.
Resumo:
This thesis describes modelling, synthesis, spectroscopic and physical characterisation, as well as application of Magnesium, Calcium and Copper β-diketonate, β-ketoiminate, β-diiminate, Schiff base, amide and fluorenyl compounds. The selected compounds could potentially find application in materials deposition using Atomic Layer Deposition (ALD), MOCVD, CVD and Sol-Gel techniques. Quantum chemical modelling was used as a tool to perform the comprehensive and rapid study of magnesium and calcium precursor molecules in order to predict which of them would be more successful in ALD of metal oxides. Precursor chemistry plays a key role in ALD, since precursors must be volatile, thermally stable, chemisorb on the surface and react rapidly with existing surface groups. This Thesis describes one aspect of this, surface reactivity between ligands and hydroxyl groups, via a gas-phase model with energetics computed at the level of Density Functional Theory (DFT). A number of different synthetic strategies, both aerobic and anaerobic, were investigated for the synthesis of the described metal complexes. These included the use of different metal starting reagents such as, anhydrous and hydrated inorganic metal salts, metal alkyls and Grignard reagents. Some of previously unreported metal complexes of homoleptic and heteroleptic magnesium, calcium and copper β-diketonates, β-ketoiminates, β-diiminates, amides and Schiff base type were synthesised and characterised: [Mg(hfpd)2(DipPa)], [Mg(hfpd)2(MapH)2], [Mg(hf-ebp)(THF)2], [Mg(tf-Pap)Cl(THF)2], [Ca(PhNacnac)2], [Cu(tf-Pap)2], [Cu(PhNacnac)2], [Cu(hf-ebp)], [Cu(DipPa)] and [Cu(DipPa)2(4,4’-bypy)]. A comprehensive study on the thermal properties of magnesium, calcium and copper β-diketonates, β-ketoiminates, β-diiminates, Schiff base, amide and fluorenyl complexes was performed using TGA and sublimation of selected compounds. Atomic Layer Deposition of MgO using magnesium β-ketoiminate – [bis{(4-N-phenyl)-2-pentonato} magnesium] and β-diketonate - [bis(1,1,1,5,5,5-hexafluoropentane-2,4-dionato)(THF)magnesium hydrate] was performed on Si(100) substrates at 180°C and 0.2 Torr using O2 plasma.
Resumo:
© 2012 by Oxford University Press. All rights reserved.This article considers the determinants and effects of M&As in the pharmaceutical industry, with a particular focus on innovation and R&D productivity. As is the case in other industries, mergers in the pharmaceutical field are driven by a variety of company motives and conditions. These include defensive responses to industry shocks as well as more proactive rationales, such as economies of scale and scope, access to new technologies, and expansion to new markets. It is important to take account of firms' characteristics and motivations in evaluating merger performance, rather than using a broad aggregate brushstroke. Research to date on pharmaceuticals suggests considerable variation in both motivation and outcomes. From an antitrust policy standpoint, the larger horizontal mergers in pharmaceuticals have run into few challenges from regulatory authorities in the United States and the European Union, given the option to spin off competing therapeutic products to other drug firms.
Resumo:
p.245-252
Resumo:
p.219-226
Resumo:
Motion transparency provides a challenging test case for our understanding of how visual motion, and other attributes, are computed and represented in the brain. However, previous studies of visual transparency have used subjective criteria which do not confirm the existence of independent representations of the superimposed motions. We have developed measures of performance in motion transparency that require observers to extract information about two motions jointly, and therefore test the information that is simultaneously represented for each motion. Observers judged whether two motions were at 90 to one another; the base direction was randomized so that neither motion taken alone was informative. The precision of performance was determined by the standard deviations (S.D.s) of probit functions fitted to the data. Observers also made judgments of orthogonal directions between a single motion stream and a line, for one of two transparent motions against a line and for two spatially segregated motions. The data show that direction judgments with transparency can be made with comparable accuracy to segregated (non-transparent) conditions, supporting the idea that transparency involves the equivalent representation of two global motions in the same region. The precision of this joint direction judgment is, however, 2–3 times poorer than that for a single motion stream. The precision in directional judgment for a single stream is reduced only by a factor of about 1.5 by superimposing a second stream. The major effect in performance, therefore, appears to be associated with the need to compute and compare two global representations of motion, rather than with interference between the dot streams per se. Experiment 2tested the transparency of motions separated by a range of angles from 5 to 180 by requiring subjects to set a line matching the perceived direction of each motion. The S.D.s of these settings demonstrated that directions of transparent motions were represented independently for separations over 20. Increasing dot speeds from 1 to 10 deg/s improved directional performance but had no effect on transparency perception. Transparency was also unaffected by variations of density between 0.1 and 19 dots/deg2
Resumo:
In Spain, during the recent housing bubble, purchasing a home seemed the most advantageous strategy to access housing, and there was a wide social consensus about the unavoidability of mortgage indebtedness. However, such consensus has been challenged by the financial and real-estate crisis. The victims of home repossessions have been affected by the transgression of several principles, such as the fair compensation for effort and sacrifice, the prioritisation of basic needs over financial commitments, the possibility of a second chance for over-indebted people, or the State's responsibility to guarantee its citizens' livelihood. Such principles may be understood as part of a moral economy, and their transgression has resulted in the emergence of a social movement, the Plataforma de Afectados por la Hipoteca (PAH), that is questioning the legitimacy of mortgage debts. The article reflects on the extent to which the perception of over-indebtedness and evictions as unfair situations can have an effect on the reproduction of the political-economic system, insofar the latter is perceived as able or unable to repair injustice.
Resumo:
Fixed-node diffusion Monte Carlo computations are used to determine the ground state energy and electron density for jellium spheres with up to N = 106 electrons and background densities corresponding to the electron gas parameter 1 less than or equal to r(s)less than or equal to5.62. We analyze the density and size dependence of the surface energy, and we extrapolate our data to the thermodynamic limit. The results agree well with the predictions of density functional computations using the local density approximation. In the case of N = 20, we extend our computation to higher densities and identify a transition between atomic- and jelliumlike nodal structures occurring at the background density corresponding to r(s)=0.13. In this case the local density approximation is unable to reproduce the changes in the correlation energy due to the discontinuous transition in the ground state nodal structure. We discuss the relevance of our results for nonlocal approximations to density functional theory.
Resumo:
As semiconductor electronic devices scale to the nanometer range and quantum structures (molecules, fullerenes, quantum dots, nanotubes) are investigated for use in information processing and storage, it, becomes useful to explore the limits imposed by quantum mechanics on classical computing. To formulate the problem of a quantum mechanical description of classical computing, electronic device and logic gates are described as quantum sub-systems with inputs treated as boundary conditions, outputs expressed.is operator expectation values, and transfer characteristics and logic operations expressed through the sub-system Hamiltonian. with constraints appropriate to the boundary conditions. This approach, naturally, leads to a description of the subsystem.,, in terms of density matrices. Application of the maximum entropy principle subject to the boundary conditions (inputs) allows for the determination of the density matrix (logic operation), and for calculation of expectation values of operators over a finite region (outputs). The method allows for in analysis of the static properties of quantum sub-systems.
Resumo:
Este artículo resulta de investigaciones en torno al “enverdecimiento” de las ciudades y las oportunidades de la agricultura urbana para la alimentación de una población en constante aumento que no trabaja la tierra. También es fruto de actividades de mejora de ambientes urbanos realizadas con la Escuela de Ingenieros Agrónomos de la Universidad Politécnica de Madrid. A través de casos de agricultura urbana, entendiendo por ella el conjunto de prácticas para la producción de alimentos y plantas ornamentales dentro de las ciudades y en sus entornos, se analizan alternativas para la recuperación de espacios construidos e incremento de la calidad de vida de la población. Todo ello se traduce, además, en creación de riqueza y mejora del paisaje urbano, siempre desde criterios de sostenibilidad que favorecen el desarrollo local desde la Cumbre de la Tierra de Río de 1992 y la Conferencia sobre Desarrollo Sostenible Río+20 de 2013.
Resumo:
We present a synthesis of empirical and theoretical work investigating how parasites influence competitive and predatory interactions between other species. We examine the direct and indirect effects of parasitism and discuss examples of density and parasite-induced trait-mediated effects. Recent work reveals previously unrecognized complexity in parasite-mediated interactions. In addition to parasite-modified and apparent competition leading to species exclusion or enabling coexistence, parasites and predators interact in different ways to regulate or destablize the population dynamics of their joint prey. An emerging area is the impact of parasites on intraguild predation (IGP). Parasites can increase vulnerability of infected individuals to cannibalism or predation resulting in reversed species dominance in IGP hierarchies. We discuss the potential significance of parasites for community structure and biodiversity, in particular their role in promoting species exclusion or coexistence and the impact of emerging diseases. Ongoing invasions provide examples where parasites mediate native/invader interactions and play a key role in determining the outcome of invasions. We highlight the need for more quantitative data to assess the impact of parasites on communities, and the combination of theoretical and empirical studies to examine how the effects of parasitism scale up to community-level processes.