The impact of geometric non-linearities on the fatigue analysis of trailing edge bond lines in wind turbine rotor blades

The accurate prediction of stress histories for the fatigue analysis is of utmost importance for the design process of wind turbine rotor blades. As detailed, transient, and geometrically non-linear three-dimensional finite element analyses are computationally weigh too expensive, it is commonly regarded sufficient to calculate the stresses with a geometrically linear analysis and superimpose different stress states in order to obtain the complete stress histories. In order to quantify the error from geometrically linear simulations for the calculation of stress histories and to verify the practical applicability of the superposition principal in fatigue analyses, this paper studies the influence of geometric non-linearity in the example of a trailing edge bond line, as this subcomponent suffers from high strains in span-wise direction. The blade under consideration is that of the IWES IWT-7.5-164 reference wind turbine. From turbine simulations the highest edgewise loading scenario from the fatigue load cases is used as the reference. A 3D finite element model of the blade is created and the bond line fatigue assessment is performed according to the GL certification guidelines in its 2010 edition, and in comparison to the latest DNV GL standard from end of 2015. The results show a significant difference between the geometrically linear and non-linear stress analyses when the bending moments are approximated via a corresponding external loading, especially in case of the 2010 GL certification guidelines. This finding emphasizes the demand to reconsider the application of the superposition principal in fatigue analyses of modern flexible rotor blades, where geometrical nonlinearities become significant. In addition, a new load application methodology is introduced that reduces the geometrically non-linear behaviour of the blade in the finite element analysis.

Some results on open-edge and open mobile guarding of polygons and triangulations

This paper focuses on a variation of the Art Gallery problem that considers open-edge guards and open mobile-guards. A mobile guard can be placed on edges and diagonals of a polygon, and the ‘open’ prefix means that the endpoints of such an edge or diagonal are not taken into account for visibility purposes. This paper studies the number of guards that are sufficient and sometimes necessary to guard some classes of simple polygons for both open-edge and open mobile-guards. A wide range of polygons is studied, which include orthogonal polygons with or without holes, spirals, orthogonal spirals and monotone polygons. Moreover, this problem is also considered for planar triangulation graphs using open-edge guards.

Introducing mobile edge computing capabilities through distributed 5G Cloud Enabled Small Cells

Current trends in broadband mobile networks are addressed towards the placement of different capabilities at the edge of the mobile network in a centralised way. On one hand, the split of the eNB between baseband processing units and remote radio headers makes it possible to process some of the protocols in centralised premises, likely with virtualised resources. On the other hand, mobile edge computing makes use of processing and storage capabilities close to the air interface in order to deploy optimised services with minimum delay. The confluence of both trends is a hot topic in the definition of future 5G networks. The full centralisation of both technologies in cloud data centres imposes stringent requirements to the fronthaul connections in terms of throughput and latency. Therefore, all those cells with limited network access would not be able to offer these types of services. This paper proposes a solution for these cases, based on the placement of processing and storage capabilities close to the remote units, which is especially well suited for the deployment of clusters of small cells. The proposed cloud-enabled small cells include a highly efficient microserver with a limited set of virtualised resources offered to the cluster of small cells. As a result, a light data centre is created and commonly used for deploying centralised eNB and mobile edge computing functionalities. The paper covers the proposed architecture, with special focus on the integration of both aspects, and possible scenarios of application.

ATTACHMENT, GROWTH AND PERSISTENCE OF CRONOBACTER ON GRANULAR ACTIVATED CARBON FILTERS

Several Cronobacter outbreaks have implicated contaminated drinking water. This study assessed the impact of granular activated carbon (GAC) on the microbial quality of the water produced. A simulated water filter system was installed by filling plastic columns with sterile GAC, followed by sterile water with a dilute nutrient flowing through the column at a steady rate. Carbon columns were inoculated with Cronobacter on the surface, and the effluent monitored for Cronobacter levels. During a second phase, commercial faucet filters were distributed to households for 4-month use. Used filters were backwashed with sterile peptone water, and analyzed for Cronobacter, total aerobic plate count, coliform bacteria and Enterobacteriaceae. Cronobacter colonized the simulated GAC and grew when provided minimal levels of nutrients. Backwashed used filters used in home settings yielded presumptive Escherichia coli, Pseudomonas and other waterborne bacteria. Presumptive Cronobacter strains were identified as negative through biochemical and genetic test.

The Indistinct Edge: Reconnecting Experience in Nature and Architecture

This thesis explores how architectures sense of place is rooted in the natural environment. The built environment has been constructed to protect and sustain human culture from the weathering of nature. Separating experience from the natural environment removes a sense of place and belonging in the natural and reinforces architectural dominance. This separation distinguishes the natural world as an article of spectacle and gives the human experience an unnatural voyeurship to natural changes. By examining the fusion of architectural and natural edges this thesis analyzes how the human experience can reconnect with a naturalistic sense of place through architecture, blending the finite edge where architecture maintains nature, and adapting buildings to the cycles of the environment. Removing dominance of man-made spaces and replacing them with the cohabitation of the edge between built and natural forms.

Topological massive Dirac edge modes and long-range superconducting Hamiltonians

We discover novel topological effects in the one-dimensional Kitaev chain modified by long-range Hamiltonian deformations in the hopping and pairing terms. This class of models display symmetry-protected topological order measured by the Berry/Zak phase of the lower-band eigenvector and the winding number of the Hamiltonians. For exponentially decaying hopping amplitudes, the topological sector can be significantly augmented as the penetration length increases, something experimentally achievable. For power-law decaying superconducting pairings, the massless Majorana modes at the edges get paired together into a massive nonlocal Dirac fermion localized at both edges of the chain: a new topological quasiparticle that we call topological massive Dirac fermion. This topological phase has fractional topological numbers as a consequence of the long-range couplings. Possible applications to current experimental setups and topological quantum computation are also discussed.

EXPERIMENTAL INVESTIGATION INTO PARTICULATE MATTER DISTRIBUTION IN CATALYZED PARTICULATE FILTERS USING A 3D TERAHERTZ WAVE SCANNER

The particulate matter distribution (PM) trends that exist in catalyzed particulate filters (CPFs) after loading, passive oxidation, active regeneration, and post loading conditions are not clearly understood. These data are required to optimize the operation of CPFs, prevent damage to the CPFs caused by non-uniform distributions, and develop accurate CPF models. To develop an understanding of PM distribution trends, multiple tests were conducted and the PM distribution was measured in three dimensions using a terahertz wave scanner. The results of this work indicate that loading, passive oxidation, active regeneration, and post loading can all cause non-uniform PM distributions. The density of the PM in the substrate after loading and the amount of PM that is oxidized during passive oxidations and active regenerations affect the uniformity of the distribution. Post loading that occurs after active regenerations result in distributions that are less uniform than post loading that occurs after passive oxidations.

Edge centrality via the Holevo quantity

In the study of complex networks, vertex centrality measures are used to identify the most important vertices within a graph. A related problem is that of measuring the centrality of an edge. In this paper, we propose a novel edge centrality index rooted in quantum information. More specifically, we measure the importance of an edge in terms of the contribution that it gives to the Von Neumann entropy of the graph. We show that this can be computed in terms of the Holevo quantity, a well known quantum information theoretical measure. While computing the Von Neumann entropy and hence the Holevo quantity requires computing the spectrum of the graph Laplacian, we show how to obtain a simplified measure through a quadratic approximation of the Shannon entropy. This in turns shows that the proposed centrality measure is strongly correlated with the negative degree centrality on the line graph. We evaluate our centrality measure through an extensive set of experiments on real-world as well as synthetic networks, and we compare it against commonly used alternative measures.

Adaptive edge analytics for distributed networked control of water systems

Over the last decade, there has been a trend where water utility companies aim to make water distribution networks more intelligent in order to improve their quality of service, reduce water waste, minimize maintenance costs etc., by incorporating IoT technologies. Current state of the art solutions use expensive power hungry deployments to monitor and transmit water network states periodically in order to detect anomalous behaviors such as water leakage and bursts. However, more than 97% of water network assets are remote away from power and are often in geographically remote underpopulated areas, facts that make current approaches unsuitable for next generation more dynamic adaptive water networks. Battery-driven wireless sensor/actuator based solutions are theoretically the perfect choice to support next generation water distribution. In this paper, we present an end-to-end water leak localization system, which exploits edge processing and enables the use of battery-driven sensor nodes. Our system combines a lightweight edge anomaly detection algorithm based on compression rates and an efficient localization algorithm based on graph theory. The edge anomaly detection and localization elements of the systems produce a timely and accurate localization result and reduce the communication by 99% compared to the traditional periodic communication. We evaluated our schemes by deploying non-intrusive sensors measuring vibrational data on a real-world water test rig that have had controlled leakage and burst scenarios implemented.

On the Bleeding Edge : Debloating Internet Access Networks

As ever more devices are connected to the internet, and applications turn ever more interactive, it becomes more important that the network can be counted on to respond reliably and without unnecessary delay. However, this is far from always the case today, as there can be many potential sources of unnecessary delay. In this thesis we focus on one of them: Excess queueing delay in network routers along the path, also known as bufferbloat. We focus on the home network, and treat the issue in three stages. We examine latency variation and queueing delay on the public internet and show that significant excess delay is often present. Then, we evaluate several modern AQM algorithms and packet schedulers in a residential setting, and show that modern AQMs can almost entirely eliminate bufferbloat and extra queueing latency for wired connections, but that they are not as effective for WiFi links. Finally, we go on to design and implement a solution for bufferbloat at the WiFi link, and also design a workable scheduler-based solution for realising airtime fairness in WiFi. Also included in this thesis is a description of Flent, a measurement tool used to perform most of the experiments in the other papers, and also used widely in the bufferbloat community.

Edge enhancement improves disruptive camouflage by emphasising false edges and creating pictorial relief

Disruptive colouration is a visual camouflage composed of false edges and boundaries. Many disruptively camouflaged animals feature enhanced edges; light patches are surrounded by a lighter outline and/or a dark patches are surrounded by a darker outline. This camouflage is particularly common in amphibians, reptiles and lepidopterans. We explored the role that this pattern has in creating effective camouflage. In a visual search task utilising an ultra-large display area mimicking search tasks that might be found in nature, edge enhanced disruptive camouflage increases crypsis, even on substrates that do not provide an obvious visual match. Specifically, edge enhanced camouflage is effective on backgrounds both with and without shadows; i.e. this is not solely due to background matching of the dark edge enhancement element with the shadows. Furthermore, when the dark component of the edge enhancement is omitted the camouflage still provided better crypsis than control patterns without edge enhancement. This kind of edge enhancement improved camouflage on all background types. Lastly, we show that edge enhancement can create a perception of multiple surfaces. We conclude that edge enhancement increases the effectiveness of disruptive camouflage through mechanisms that may include the improved disruption of the object outline by implying pictorial relief.

Living on the edge : Social exclusion and the receipt of informal care in older people

Older people have been identified as being at risk of social exclusion. However, despite the fact that care is commonly required in later life and the majority of that care provided by informal carers, a connection between social exclusion and informal care-receipt has rarely been considered. The aim of this study was to examine how informal care-receipt is related to social exclusion. A face-to-face questionnaire survey on social exclusion and informal care-receipt was carried out among older people (n=1255) living in Barnsley, United Kingdom. Multivariable analyses examined the association between social exclusion and categories of informal care-receipt: care receiver; assurance receiver; non-receiver with no need; non-receiver with need. Compared to being a non-receiver with no need participants were more likely to be a care receiver or assurance receiver if they had higher levels of social exclusion. The highest level of social exclusion, however, was found in non-receivers with need. Despite a lack of informal care and support, formal practical support and personal care was also low in this latter group. Findings are discussed in relation to the conceptualisation of care-receipt and how contact with medical services could be an opportunity for identification and appropriate referral of non-receivers with need.

Living on the intertidal/subtidal edge: ecology of the stalked barnacle Pollicipes Pollicipes and of the sea urchin Paracentrotus lividus

This thesis contributes to the knowledge of temperate rocky shore ecology, with direct implications in the management and conservation of two important local marine resources that inhabit the very edge of subtidal and intertidal habitats on wave-swept rocky shores: the sessile filter feeding stalked barnacle Pollicipes pollicipes and the mobile keystone herbivore sea urchin Paracentrotus lividus. Research was conducted along gradients of wave exposure on rocky shores of Southern Europe. The abundance of P. lividus was four times higher in SW Portugal than in NW Italy. Most of the variation in urchin abundance occurred at small spatial scales, probably shaped by habitat complexity. In SW Portugal, sea urchin attachment forces while in burrows were measured and related to burrow shape, urchin size and habitat. Burrowing behaviour enhances sea urchin attachment force and might be an adaptive response to hydrodynamic stress. Abundance of P. pollicipes in SW Portugal is highly and positively related to wave exposure at local and regional scales. Predation and recruitment processes seem to be important drivers of these abundance patterns. A distribution model of P. pollicipes abundance in relation to wave exposure was developed for the SW coast of Portugal and might be used for improvement of its management and conservation. Growth of P. pollicipes was studied by applying a novel method using fluorescent calcein for marking and to estimate growth. Growth rate decreased with barnacle size and was highly variable amongst individuals, particularly in smaller barnacles. No effect of shore level on barnacle growth was detected. An assessment of the state of the fishery, conservation and management of the stalked barnacle in different regions of continental Portugal was made, highlighting an overall negative tendency of this state and recommending a change into a co-management system; Resumo: Viver no limite intertidal / subtidal: ecologia do percebe Pollicipes pollicipes e do ouriço-do-mar Paracentrotus lividus Esta tese contribui para o conhecimento da ecologia do litoral rochoso e tem implicações diretas na gestão e conservação de dois recursos marinhos locais que habitam o interface subtidal/intertidal de costas rochosas sujeitas a agitação marinha: o percebe Pollicipes pollicipes, animal séssil e filtrador e o ouriço-do-mar Paracentrotus lividus, animal móvel e herbívoro. Foram realizados vários estudos ao longo de gradientes de hidrodinamismo em costas rochosas do sul da Europa. A abundância de P. lividus foi quatro vezes superior no sudoeste de Portugal relativamente ao noroeste de Itália. Grande parte da variação na abundância de P. lividus ocorreu a pequenas escalas espaciais, provavelmente influenciada pela complexidade do habitat. A força com que o ouriço-do-mar se fixa ao substrato foi medida no terreno no sudoeste de Portugal, tendo esta sido relacionada com a forma da depressão que ocupa, o tamanho individual e o habitat. O comportamento escavador desta espécie aumenta a sua força de fixação ao substrato e poderá ser uma resposta adaptativa ao hidrodinamismo.. A abundância de P. pollicipes na costa sudoeste de Portugal, a diferentes escalas espaciais, está relacionada de forma positiva com a agitação marinha, e é influenciada pela predação e pelo recrutamento desta espécie. Foi desenvolvido um modelo de distribuição e abundância de P. pollicipes para esta costa baseado na relação com a agitação marinha, cujos resultados podem ser usados para melhorar a gestão e conservação deste recurso. Um novo método com recurso a calceina fluorescente foi desenvolvido para marcar percebes e estudar o seu crescimento. A taxa de crescimento diminuiu com o tamanho do animal, sendo altamente variável entre indivíduos, sobretudos nos de menores dimensões. O estado da apanha, conservação e gestão do percebe em diferentes regiões de Portugal Continental apresentou uma tendência global negativa, e recomenda-se uma alteração para um sistema de cogestão deste recurso.