683 resultados para DIP


Relevância:

10.00% 10.00%

Publicador:

Resumo:

In Australia, Sportak® (a.i., prochloraz) has been registered since the early 1980's for the postharvest control of both anthracnose and stem-end rots in papaya fruit, despite the persistence of fruit breakdown due to disease during transit and at market destinations. Consequently, the Australian papaya industry has been concerned over the efficacy of prochloraz and whether substitute or alternative solutions were available for better disease control, particularly during times of peak disease pressure. This study therefore investigated the effects of various postharvest treatments for disease control in papaya. Fruit were harvested at colour break from coastal farms in Far North Queensland and treated with commercial rates of various fungicides, including prochloraz, imazalil, thiabendazole and fludioxonil. Additional solutions known to inhibit disease were examined, including chitosan and carnauba wax both with and without ammonium carbonate (AC). Following treatment, fruit were ripened and assessed for quality over their shelf life. Fludioxonil when applied as a hot dip was found to be a more efficacious treatment for control of disease in papaya than prochloraz. The other fungicides were moderately effective, as both thiabendazol and prochloraz exhibited an intermediate response and imazalil was the least effective. Disease severity was lowest in fruit treated with AC followed by chitosan, whilst chitosan delayed degreening. Overall, the study found that hot fludioxonil provided an effective replacement of the currently registered chemical prochloraz, and that alternate solutions such chitosan and AC may also be beneficial, particularly for low chemical input farming systems.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This project was done for identifying and survey on distribution and diversity of true crabs in inter tidal and sub tidal zones of the Gulf of Oman (Sistan and Baluchistan province) during two year from 2009 to 2010. Specimens of inter tidal zones were carried out at 10 stations and 8 stations from sub tidal. The specimens were collected by hand and dip-net from inter tidal and by trawl net from sub tidal regions, preserved in 70% alcohol and carried to the laboratory. A total of 37 species belonged to 17 families from inter tidal and 23 species belonged to 9 families from sub tidal were identified. Of which 54 species were identified up to species level. 2 species from Matutidae, 1 species from Eriphiidae, Menippidae, Pseudoziidae, Plagusidae, Varunidae, Camptandriidae, Dromiidae and Dorippidae, 2 species from Oziidae, 3 species from Epialtidae, 2 species from Majidae, 4 species from Pilumnidae, 12 species from Portunidae, 6 species from Xanthidae, 2 species from Grapsidae, 3 species from Dotillidae, 3 species from Macrophthalmidae, 3 species from Ocypodidae, 3 species from Calappidae, 2 species from Parthenopidae and 1 species from Galenidae were identified. All specimens are deposited in the Zoological Museum, University of Tehran (ZUTC). The results of the present study revealed that family Portunidae with 6 species from inter tidal and 9 species from sub tidal regions have the highest species richness among the 22 families. Maximum similarity (Sorenson's Index) was obtained among the stations Breis, Lipar, Pozm and Gordim, and minimum was obtained among the stations Chazire-Kharchang with Pasabandar, Beris, Lipar, Daria-Bozorg, Pozm and Gordim in intertidal regions. In sub tidal regions maximum similarity (Sorenson's Index) was obtained among the stations Pasa bandar with Berisand minimum was obtained among the stations Govatr with Ramin and Gordim, Ramin with Pozm. Also maximum species richness was observed at Tiss in inter tidal and Chabahar in sub tidal stations, whereas minimum was obtained at Beris, Pozm, Gordim and Lipar in inter tidal and Govatr and Pozm in sub tidal stations. Family Ocypodidae in inter tidal and Portunidae in sub tidal regions have the highest distribution. In all of the species length and Breadth of carapace showed significant relation.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Neste trabalho foi avaliado o processo de recobrimento de partículas de areia com quitosana utilizando a técnica dip-coating, e analisado o emprego destas partículas como recheio de uma coluna de leito fixo no processo de adsorção de cromo (VI) em solução aquosa. A quitosana foi obtida a partir de resíduos de camarão e caracterizada. O estudo avaliou a influência do tamanho das partículas e da concentração da solução de quitosana no recobrimento das partículas de areia. Foram avaliados parâmetros termodinâmicos, isotermas de equilíbrio e parâmetros relacionados ao funcionamento do leito (vazão e pH da solução, diâmetro de partícula) para o processo de adsorção de cromo (VI) em solução aquosa. No recobrimento das partículas de areia, o tamanho não teve significância na resposta, enquanto a concentração da solução de recobrimento mostrou ter grande influência sobre o resultado, sendo que a menor concentração de quitosana dentro da faixa estudada (0,5% p/v) apresentou o melhor desempenho. O processo de cura física para o recobrimento das partículas de areia mostrou melhor desempenho para a adsorção de cromo (VI) em leito fixo frente ao processo físico-químico. As análises de superfície (MEV) e de difração de raio-X (EDX) comprovaram a mudança na superfície das partículas recobertas e a presença de cromo após a adsorção. O modelo de Sips foi o que melhor representou os dados experimentais de equilíbrio, com R2 >0,99% e EMR<3,5%, sendo que a capacidade máxima de adsorção foi de 46,93 mg g-1 obtida a 298 K. O processo se mostrou espontâneo, exotérmico e favorável, com valores de -4,49 a -4,66kJ mol-1 para e energia livre de Gibbs, -5,97kJ mol-1 para a variação de entalpia e -5,17x10-3 kJ mol-1K -1 para variação de entropia. O aumento do pH diminuiu a adsorção de cromo (VI), sendo que a melhor resposta foi obtida em pH 3, sendo que o diâmetro de partícula não teve efeito significante. O estudo da vazão da solução de cromo (VI) no desempenho do leito mostrou que no menor valor (2,5 mL min-1 ) a concentração de saída do leito foi próxima a zero, mantendo-se com concentrações de saída abaixo de 20% por pelo menos 20 min. O estudo da dessorção do leito mostrou que após cinco ciclos de trabalho o leito manteve 86% da capacidade de adsorção, com taxas de recuperação do cromo no processo de dessorção maiores que 95%.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The paper studies the influence of rail weld dip on wheel-rail contact dynamics, with particular reference to freight trains where it is important to increase the operating speed and also the load transported. This has produced a very precise model, albeit simple and cost-effective, which has enabled train-track dynamic interactions over rail welds to be studied to make it possible to quantify the influence on dynamic forces and displacements of the welding geometry; of the position of the weld relative to the sleeper; of the vehicle's speed; and of the axle load and wheelset unsprung mass. It is a vertical model on the spatial domain and is drawn up in a simple fashion from vertical track receptances. For the type of track and vehicle used, the results obtained enable the quantification of increases in wheel-rail contact forces due to the new speed and load conditions.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Mid-oceanic ridge system is a feature unique to Earth. It is one of the fundamental components of plate tectonics and reflects interior processes of mantle convection within the Earth. The thermal structure beneath the mid-ocean ridges has been the subject of several modeling studies. It is expected that the elastic thickness of the lithosphere is larger near the transform faults that bound mid-ocean ridge segments. Oceanic core complexes (OCCs), which are generally thought to result from long-lived fault slip and elastic flexure, have a shape that is sensitive to elastic thickness. By modeling the shape of OCCs emplaced along a ridge segment, it is possible to constraint elastic thickness and therefore the thermal structure of the plate and how it varies along-axis. This thesis builds upon previous studies that utilize thin plate flexure to reproduce the shape of OCCs. I compare OCC shape to a suite of models in which elastic thickness, fault dip, fault heave, crustal thickness, and axial infill are systematically varied. Using a grid search, I constrain the parameters that best reproduce the bathymetry and/or the slope of ten candidate OCCs identified along the 12°—15°N segment of the Mid-Atlantic Ridge. The lithospheric elastic thicknesses that explains these OCCs is thinner than previous investigators suggested and the fault planes dip more shallowly in the subsurface, although at an angle compatible with Anderson’s theory of faulting. No relationships between model parameters and an oceanic core complexes location within a segment are identified with the exception that the OCCs located less than 20km from a transform fault have slightly larger elastic thickness than OCCs in the middle of the ridge segment.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In May, June and July 1996, samples wcre collected along one transect greatly influenced by river discharge (eastern side of the gulf), along one transect slightly influence by river discharge (western side), at one station Iocated in the mouth of the main river (River Daugava), at one station located in the center of the Gulf and at several nearshore locations of the western side. Ratios of rnolecular concentrations of in situ dissolved ioorganic nitrogen, phosphorus and silicon, as weIl as enrichment bioassays were llsed to dctcrrnine which nutrient (s) lirnited the potential biomass of phytoplankton. Both comparison of (NO.d-N02+NJ.L): P04 (DIN: DIP) values with Redfic1d's ratio and bioassay inspection led to the sarne conclusions. Phosphorus was clearly the nutrient most limiting for the potcntial biornass of test species in nitrogen- rich waters, which occurred in mid spring, in the upper layer of the southern-eastern part of the Gulf which is greatly influenced by river discharge. In late spring, with the decrease of the total DIN reserve, nitrogen and phosphorus showed an equallimiting role. In deeper layers of this area and out of the river plume (western side and central part of the gulf), nitrogen was the limiting nutrient. In summer, whcn river discharge was the lowest, a11 DIN concentrations but one ranged between 1.6 and 2.6 µM, and the whole area was nitrogen-limited for both the cyanobacterial and the algal test strains. In 74% of the samples for which nitrogen was the limiting nutrient, phosphorus was recorded to be the second potentially limiting nutrient. In contrast, silicon never appeared as limiting the growth potential of either Microcystis aeruginosa or Phaeodactylum tricornutum; phosphorus was the limiting nutrient when DIN: Si03 values were >1 (in May), but DIN: Si03 was <1 when nitrogen was limiting (June and July). The authors conclude that the recently reported decrease of silicon loading in coastal waters and its subsequent enhanced importance in pushing the outcome of species competition towards harmful species may not yet be the most important factor for the Gulf of Riga. Iron appeared for 12% of the tests in the list of nutrients limiting the potential biomass. Tentative results also indicated that a significant fraction of the nitrogen (~,4 µg-atom N 1(-1) taken up by Microcystis aeruginosa may have been in the form of dissolved organic nitrogen (DON). It is thus also suggested tentatively that more attention be paid to these nitrients during further research in the Gulf of Riga.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The combustion of chlorinated volatil organic compounds (VOCs) over the perovskites LaFeO3 and La0.9MnO3 catalysts were investigated by employing a monolithic reactor. The two catalysts were individuated from a preliminary screening to test the stability and the influence of nonstoichiometry; a dip coating technique for supporting powder catalyst; was developed and the prepared catalysts were tested in a monolithic reactor. It was studied the catalytic activity of different loadings of perovskite supported on the monolith and was compared the highest loadings with a commercial catalyst, the perovskites resulted efficient catalysts for combustion of aromatic and chlorinated VOCs.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundamento: el centellograma de perfusión miocárdica (CPM) presenta una reducida sensibilidad en pacientes que no alcanzan el 85% de la frecuencia cardíaca máxima prevista (FCMP). Objetivos: intentando mantener la sensibilidad diagnóstica sin perder los datos funcionales del ejercicio, se desarrolló un nuevo protocolo combinado de ejercicio y dipiridamol (PCED). Nuestro objetivo fue evaluar la factibilidad y seguridad de este protocolo y comparar su sensibilidad diagnóstica con las de los protocolos convencionales de ejercicio y dipiridamol. Métodos: a los pacientes que no alcanzaron una prueba de esfuerzo suficiente (PES) y sin contraindicaciones, se les administró 0,56 mg/kg de dipiridamol intravenoso durante 1 minuto, simultáneamente con el ejercicio, seguido de la inyección de 99mTc-MIBI. Resultados: de los 155 pacientes incluidos, 41 se realizaron CPM con el PCED, 47 con una PES (³ 85% de FCMP) y 67 con la prueba convencional de dipiridamol solo (DIP). Todos se realizaron coronariografía dentro de los tres meses. Se comparó la sensibilidad de los tres métodos de estrés para el diagnóstico de lesiones coronarias. Para estenosis ³ 70% el PCED tuvo 97% de sensibilidad, la PES 90% y el DIP 95% (p=0,43). Para lesiones ³ 50%, la sensibilidad fue de 94%, 88% y 95%, respectivamente (p=0,35). Solo el 12% de los pacientes estudiados con PCED presentaron efectos colaterales, significativamente menos que con DIP (p < 0,001). Conclusiones: el protocolo combinado propuesto es un método válido y seguro, con sensibilidad diagnóstica adecuada en los pacientes que no logran alcanzar la frecuencia cardíaca objetivo, manteniendo la información pronóstica del ejercicio y con menos efectos colaterales que el DIP.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Brazil has vast amounts of hydric resources, whose quality has been deteriorating due to pollutant dumping. Household waste disposal is one of the main sources of water pollution, stimulating bacteria proliferation and introducing microorganisms, including those from fecal matter. Conventional water disinfection methods are a solution, but on the downside, they lead to the formation byproducts hazardous to human health. In this study, aiming to develop bactericidal filters for the disinfection of drinking water; silver nanoparticles were deposited on alumina foams through three routes: sputtering DC, dip coating and in situ chemical reduction of silver nitrate. The depositions were characterized through X-ray diffraction, scanning electron microscopy and EDS element mapping. The influence of the depositions on permeability and mechanical properties of the ceramic foams was assessed and, in sequence, a preliminary antibacterial efficiency analysis was carried out. Characterization results indicate that the chemical reduction routes were efficient in depositing homogeneously distributed silver particles and that the concentration of the metallic precursor salt affects size and morphology of the particles. The antibacterial efficiency analysis indicates that the chemical reduction filters have potential for water disinfection

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Among the many types of noise observed in seismic land acquisition there is one produced by surface waves called Ground Roll that is a particular type of Rayleigh wave which characteristics are high amplitude, low frequency and low velocity (generating a cone with high dip). Ground roll contaminates the relevant signals and can mask the relevant information, carried by waves scattered in deeper regions of the geological layers. In this thesis, we will present a method that attenuates the ground roll. The technique consists in to decompose the seismogram in a basis of curvelet functions that are localized in time, in frequency, and also, incorporate an angular orientation. These characteristics allow to construct a curvelet filter that takes in consideration the localization of denoise in scales, times and angles in the seismogram. The method was tested with real data and the results were very good

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This work presents the results of a survey in oil-producing region of the Macau City, northern coast of Rio Grande do Norte. All work was performed under the Project for Monitoring Environmental Change and the Influence of Hydrodynamic forcing on Morphology Beach Grass Fields, Serra Potiguar in Macau, with the support of the Laboratory of Geoprocessing, linked to PRH22 - Training Program in Geology Geophysics and Information Technology Oil and Gas - Department of Geology/CCET/UFRN and the Post-Graduation in Science and Engineering Oil/PPGCEP/UFRN. Within the economic-ecological context, this paper assesses the importance of mangrove ecosystem in the region of Macau and its surroundings as well as in the following investigative exploration of potential areas for projects involving reforestation and / or Environmental Restoration. At first it was confirmed the ecological potential of mangrove forests, with primary functions: (i) protection and stabilization of the shoreline, (ii) nursery of marine life, and (iii) source of organic matter to aquatic ecosystems, (iv) refuge of species, among others. In the second phase, using Landsat imagery and techniques of Digital Image Processing (DIP), I came across about 18,000 acres of land that can be worked on environmental projects, being inserted in the rules signed the Kyoto Protocol to the market carbon. The results also revealed a total area of 14,723.75 hectares of activity of shrimp production and salting that can be harnessed for the social, economic and environmental potential of the region, considering that over 60% of this area, ie, 8,800 acres, may be used in the planting of the genus Avicennia considered by the literature that the species best sequesters atmospheric carbon, reaching a mean value of 59.79 tons / ha of mangrove

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Dissertação (mestrado)—Universidade de Brasília, Departamento de Botânica, Programa de Pós-Graduação em Botânica, 2016.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The effects of serum and brain calcium concentration on rat behavior were tested by maintaining animals on either distilled water (N = 60) or water containing 1% calcium gluconate (N = 60) for 3 days. Animals that were maintained on high calcium drinking water presented increased serum calcium levels (control = 10.12 ± 0.46 vs calcium treated = 11.62 ± 0.51 µg/dl). Increase of brain calcium levels was not statistically significant. In the behavioral experiments each rat was used for only one test. Rats that were maintained on high calcium drinking water showed increased open-field behavior of ambulation (20.68%) and rearing (64.57%). on the hole-board, calcium-supplemented animals showed increased head-dip (67%) and head-dipping (126%), suggesting increased ambulatory and exploratory behavior. The time of social interaction was normal in animals maintained on drinking water containing added calcium. Rats supplemented with calcium and submitted to elevated plus-maze tests showed a normal status of anxiety and elevated locomotor activity. We conclude that elevated levels of calcium enhance motor and exploratory behavior of rats without inducing other behavioral alterations. These data suggest the need for a more detailed analysis of several current proposals for the use of calcium therapy in humans, for example in altered blood pressure states, bone mineral metabolism disorders in the elderly, hypocalcemic states, and athletic activities.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Hace décadas que los efectos de la actuación de las empresas sobre el disfrute los derechos humanos (DH) forman parte del debate jurídico internacional. En un contexto expansión transfronteriza de la actividad económica se han generado estructuras empresariales transnacionales que alcanzan en ocasiones la posibilidad de influir (directamente o a través de grupos de presión) a gobiernos y administraciones públicas y de incidir negativamente en el disfrute de los DH. Si bien estas situaciones pueden producirse en cualquier lugar del mundo, los países con un menor nivel de desarrollo o en situaciones de transición son más susceptibles de convertirse en escenarios de violaciones de DH. Además, en ellos es más difícil hacer efectiva la persecución y sanción de las conductas infractoras por una escasa o deficiente regulación nacional y/o por la debilidad de las estructuras administrativas y judiciales, imbuidas de corrupción en muchos casos. Jurídicamente, el estudio de posibilidades de articular y exigir responsabilidad a las empresas por violaciones de los DH requiere en primer lugar analizar la existencia y alcance de las obligaciones en materia de DH que repercuten sobre las empresas. Con este fin, y teniendo en cuenta las iniciativas y propuestas más novedosas, este trabajo aborda los distintos enfoques que permiten las dos disciplinas jurídico-internacionales: el Derecho internacional Público (DIP) y el Derecho internacional privado (DIPr) adoptando lo que, frente a la ya suficientemente estudiada perspectiva judicial (acceso a la justicia), puede calificarse como aproximación reguladora. Como es obvio, tanto las fuentes como las técnicas de reglamentación varían si tomamos como sujetos de referencia a los Estados o a las empresas que, por lo demás, operan en planos normativos y de responsabilidad distintos. Mientras el Estado incurre en responsabilidad internacional, ésta no es en principio atribuible a las empresas que, más allá de la eventual responsabilidad penal y/o administrativa, incurren en responsabilidad civil establecida a escala nacional.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Metal oxide thin films are important for modern electronic devices ranging from thin film transistors to photovoltaics and functional optical coatings. Solution processed techniques allow for thin films to be rapidly deposited over a range of surfaces without the extensive processing of comparative vapour or physical deposition methods. The production of thin films of vanadium oxide prepared through dip-coating was developed enabling a greater understanding of the thin film formation. Mechanisms of depositing improved large area uniform coverage on a number of technologically relevant substrates were examined. The fundamental mechanism for polymer-assisted deposition in improving thin film surface smoothness and long range order has been delivered. Different methods were employed for adapting the alkoxide based dip-coating technique to produce a variety of amorphous and crystalline vanadium oxide based thin films. Using a wide range of material, spectroscopic and optical measurement techniques the morphology, structure and optoelectronic properties of the thin films were studied. The formation of pinholes on the surface of the thin films, due to dewetting and spinodal effects, was inhibited using the polymer assisted deposition technique. Uniform thin films with sub 50 nm thicknesses were deposited on a variety of substrates controlled through alterations to the solvent-alkoxide dilution ratios and employing polymer assisted deposition techniques. The effects of polymer assisted deposition altered the crystallized VO thin films from a granular surface structure to a polycrystalline structure composed of high density small in-plane grains. The formation of transparent VO based thin film through Si and Na substrate mediated diffusion highlighted new methods for material formation and doping.