An introduction to China's rail transport Part 2: Urban rail transit systems, highway transport and the reform of China's railways

In this paper, an introduction is provided to some of the components of China's transport system. The authors include the urban rail transit systems, the highway transport systems and its competition for China's railways and the reform of China's railway industry. This is the second of two papers on the situation of rail transport in China.

Research and design challenges for developing personalised eLearning systems

While E-learning technologies are continuously developing, there are number of emerging issues and challenges that have significant impact on e-learning research and design. These include educational, technological, sociological, and psychological viewpoints. The extant literature points out that a large number of existing E-learning systems have problems with offering reusable, personalized and learner-centric content. While developers are placing emphasis on the technology aspects of e-learning, critical conceptual and pedagogical issues are often ignored. This paper will reports on our research in design and development of personalised e-learning systems and some of the challenges and issues faced.

Exploring the adoption and implementation of discrete and integrated IT systems: A Framework for analysis

Despite the substantial organisational benefits of integrated IT, the implementation of such systems – and particularly Enterprise Resource Planning (ERP) systems – has tended to be problematic, stimulating an extensive body of research into ERP implementation. This research has remained largely separate from the main IT implementation literature. At the same time, studies of IT implementation have generally adopted either a factor or process approach; both have major limitations. To address these imitations, factor and process perspectives are combined here in a unique model of IT implementation. We argue that • the organisational factors which determine successful implementation differ for integrated and traditional, discrete IT • failure to manage these differences is a major source of integrated IT failure. The factor/process model is used as a framework for proposing differences between discrete and integrated IT.

Firms and Innovative Conflict Management Systems in Ireland

This article examines the practices adopted by firms in the Republic of Ireland to manage conflict involving groups of employees, focusing in particular on the uptake of 'alternative dispute resolution practices'. The article reveals that conflict management practices take the form of 'systems', and it estimates the incidence of innovative conflict management systems, incorporating alternative dispute resolution (ADR) practices, as involving about 30 per cent of firms. A series of influences are shown to be associated with innovative, ADR-based conflict management systems, especially commitment-oriented HRM practices and whether unions are recognized. © Blackwell Publishing Ltd/London School of Economics 2010.

The two-way relationship between the Balanced Scorecard and Management Control Systems in organizations:Lessons from a Case Study

This paper reports a case study conducted in Quinta da Aveleda, one of
the three largest Portuguese wine companies. Our aim was to explore the
relationship established between a newly implemented Balanced Scorecard
(BSC) and the elements of the Management Control System (MCS) in the
organization. Thus, two specific objectives were pursued. Firstly, to identify
the influences (barriers, opportunities) of the existing MCS on the implementation
of the BSC. Secondly, to identify the impacts the BSC implementation
was able to exert on the configuration of the organization’s MCS.
We found that the budgeting process, the planning system, the information
infrastructure, and the organizational structure and culture were the elements
of the previous MCS that influenced the BSC implementation process.
Eventually, the BSC implementation led to important changes in the budgeting,
planning, reporting systems and processes. In order to explain these
findings, we briefly explored the main issues and factors accounting for the
scope and nature of the BSC’s impacts on Quinta da Aveleda. These issues
and factors were the mobilized organizational resources, the implementation
approach, the communication, and the organizational support.

Understanding how HR systems work: the role of HR philosophy and HR processes

Despite the proliferation of studies of HR systems, there are still substantial gaps in our understanding
of how such systems actually work. This article, by focusing on the neglected areas of HR philosophy
and HR processes in the composition of HR systems, and by using a qualitative, employee-centred
approach in the collection and analysis of data, provides new insights into the working of HR systems.
Using data from interviews with 56 knowledge workers employed in the information and
communications technology sector in Ireland and the UK, we explore employee-level reactions to two
different types of HR systems. We highlight the various ways in which HR processes interact with HR
practices and the different outcomes that may result, and we identify the key role of HR philosophy in
HR system operation.

Electoral Systems, Ethnic Cleavages, and Experience with Democracy

Recent studies show the effects of electoral systems and ethnic cleavages on the number of parties in emerging democracies differ from those effects observed in more established democracies. Building on recent arguments maintaining the quality of democracy improves with experience, we argue the reason for the differences in the findings between established and emerging democracies is that the effects of these variables on the number of parties differ according to a country’s experience with elections. To test this argument, we analyse party system fragmentation in 89 established and emerging democracies and the conditioning effects experience with elections have on the effects of district magnitude, ethnic cleavages, and variables relating to the presidential party system. The results show the effects of institutional and social cleavage variables differ substantially between emerging and established democracies, but these effects begin to approximate those seen in more established democracies with additional experience with elections.

Novel Delivery Systems for Transdermal and Intradermal Drug Delivery

This research book covers the major aspects relating to the use of novel delivery systems in enhancing both transdermal and intradermal drug delivery. It provides a review of transdermal and intradermal drug delivery, including the history of the field and the various methods employed to produce delivery systems from different materials such as device design, construction and evaluation, so as to provide a sound background to the use of novel systems in enhanced delivery applications.

Furthermore, it presents in-depth analyses of recent developments in this exponentially growing field, with a focus on microneedle arrays, needle-free injections, nanoparticulate systems and peptide-carrier-type systems. It also covers conventional physical enhancement strategies, such as tape-stripping, sonophoresis, iontophoresis, electroporation and thermal/suction/laser ablation Discussions about the penetration of the stratum corneum by the various novel strategies highlight the importance of the application method. Comprehensive and critical reviews of transdermal and intradermal delivery research using such systems focus on the outcomes of in vivoanimal and human studies. The book includes laboratory, clinical and commercial case studies featuring safety and patient acceptability studies carried out to date, and depicts a growing area for use of these novel systems is in intradermal vaccine delivery. The final chapters review recent patents in this field and describe the work ongoing in industry.

Storage of sediment-associated nutrients and contaminants in river channel and floodplain systems

Samples of fine-grained channel bed sediment and overbank floodplain deposits were collected along the main channels of the Rivers Aire (and its main tributary, the River Calder) and Swale, in Yorkshire, UK, in order to investigate downstream changes in the storage and deposition of heavy metals (Cr, Cu, Pb, Zn), total P and the sum of selected PCB congeners, and to estimate the total storage of these contaminants within the main channels and floodplains of these river systems. Downstream trends in the contaminant content of the <63 μm fraction of channel bed and floodplain sediment in the study rivers are controlled mainly by the location of the main sources of the contaminants, which varies between rivers. In the Rivers Aire and Calder, the contaminant content of the <63 μm fraction of channel bed and floodplain sediment generally increases in a downstream direction, reflecting the location of the main urban and industrialized areas in the middle and lower parts of the basin. In the River Swale, the concentrations of most of the contaminants examined are approximately constant along the length of the river, due to the relatively unpolluted nature of this river. However, the Pb and Zn content of fine channel bed sediment decreases downstream, due to the location of historic metal mines in the headwaters of this river, and the effect of downstream dilution with uncontaminated sediment. The magnitude and spatial variation of contaminant storage and deposition on channel beds and floodplains are also controlled by the amount of <63 μm sediment stored on the channel bed and deposited on the floodplain during overbank events. Consequently, contaminant deposition and storage are strongly influenced by the surface area of the floodplain and channel bed. Contaminant storage on the channel beds of the study rivers is, therefore, generally greatest in the middle and lower reaches of the rivers, since channel width increases downstream. Comparisons of the estimates of total storage of specific contaminants on the channel beds of the main channel systems of the study rivers with the annual contaminant flux at the catchment outlets indicate that channel storage represents <3% of the outlet flux and is, therefore, of limited importance in regulating that flux. Similar comparisons between the annual deposition flux of specific contaminants to the floodplains of the study rivers and the annual contaminant flux at the catchment outlet, emphasise the potential importance of floodplain deposition as a conveyance loss. In the case of the River Aire the floodplain deposition flux is equivalent to between ca. 2% (PCBs) and 36% (Pb) of the outlet flux. With the exception of PCBs, for which the value is ≅0, the equivalent values for the River Swale range between 18% (P) and 95% (Pb). The study emphasises that knowledge of the fine-grained sediment delivery system operating in a river basin is an essential prerequisite for understanding the transport and storage of sediment-associated contaminants in river systems and that conveyance losses associated with floodplain deposition exert an important control on downstream contaminant fluxes and the fate of such contaminants. © 2003 Elsevier Science Ltd. All rights reserved.

A Reliability Assessment Approach For Integrated Transportation and Electrical Power Systems Incorporating Electric Vehicles

With the increasing utilization of electric vehicles (EVs), transportation systems and electrical power systems are becoming increasingly coupled. However, the interaction between these two kinds of systems are not well captured, especially from the perspective of transportation systems. This paper studies the reliability of integrated transportation and electrical power system (ITES). A bidirectional EV charging control strategy is first demonstrated to model the interaction between the two systems. Thereafter, a simplified transportation system model is developed, whose high efficiency makes the reliability assessment of the ITES realizable with an acceptable accuracy. Novel transportation system reliability indices are then defined from the view point of EV’s driver. Based on the charging control model and the transportation simulation method, a daily periodic quasi sequential reliability assessment method is proposed for the ITES system. Case studies based on RBTS system demonstrate that bidirectional charging controls of EVs will benefit the reliability of power systems, while decrease the reliability of EVs travelling. Also, the optimal control strategy can be obtained based on the proposed method. Finally, case studies are performed based on a large scale test system to verify the practicability of the proposed method.

Mechanism of Alizarin Red S and Methylene Blue Biosorption onto Olive Stone: Isotherm study in Single and Binary Systems

The biosorption process of anionic dye Alizarin Red S (ARS) and cationic dye methylene blue (MB) as a function of contact time, initial concentration and solution pH onto olive stone (OS) biomass has been investigated. Equilibrium biosorption isotherms in single and binary systems and kinetics in batch mode were also examined. The kinetic data of the two dyes were better described by the pseudo second-order model. At low concentration, ARS dye appeared to follow a two-step diffusion process, while MB dye followed a three-step diffusion process. The biosorption experimental data for ARS and MB dyes were well suited to the Redlich-Peterson isotherm. The maximum biosorption of ARS dye, qmax = 16.10 mg/g, was obtained at pH 3.28 and the maximum biosorption of MB dye, qmax = 13.20 mg/g, was observed at basic pH values. In the binary system, it was indicated that the MB dye diffuses firstly inside the biosorbent particle and occupies the biosorption sites forming a monodentate complex and then the ARS dye enters and can only bind to untaken sites; forms a tridentate complex with OS active sites.

Real-space grids and the Octopus code as tools for the development of new simulation approaches for electronic systems

Real-space grids are a powerful alternative for the simulation of electronic systems. One of the main advantages of the approach is the flexibility and simplicity of working directly in real space where the different fields are discretized on a grid, combined with competitive numerical performance and great potential for parallelization. These properties constitute a great advantage at the time of implementing and testing new physical models. Based on our experience with the Octopus code, in this article we discuss how the real-space approach has allowed for the recent development of new ideas for the simulation of electronic systems. Among these applications are approaches to calculate response properties, modeling of photoemission, optimal control of quantum systems, simulation of plasmonic systems, and the exact solution of the Schrödinger equation for low-dimensionality systems.

People and places: Understanding geographical accuracy in administrative data from the census and healthcare systems

Administrative systems such as health care registration are of increasing importance in providing information for statistical, research, and policy purposes. There is thus a pressing need to understand better the detailed relationship between population characteristics as recorded in such systems and conventional censuses. This paper explores these issues using the unique Northern Ireland Longitudinal Study (NILS). It takes the 2001 Census enumeration as a benchmark and analyses the social, demographic and spatial patterns of mismatch with the health register at individual level. Descriptive comparison is followed by multivariate and multilevel analyses which show that approximately 25% of individuals are reported to be in different addresses and that age, rurality, education, and housing type are all important factors. This level of mismatch appears to be maintained over time, as earlier migrants who update their address details are replaced by others who have not yet done so. In some cases, apparent mismatches seem likely to reflect complex multi-address living arrangements rather than data error.

Channel and frequency offset estimation schemes for multicarrier systems

O presente trabalho aborda o problema da estimação de canal e da estimação de desvio de frequência em sistemas OFDM com múltiplas configurações de antenas no transmissor e no receptor. Nesta tese é apresentado o estudo teórico sobre o impacto da densidade de pilotos no desempenho da estimação de canal em sistemas OFDM e são propostos diversos algoritmos para estimação de canal e estimação de desvio de frequência em sistemas OFDM com antenas únicas no transmissor e receptor, com diversidade de transmissão e MIMO. O estudo teórico culmina com a formulação analítica do erro quadrático médio de um estimador de canal genérico num sistema OFDM que utilize pilotos dedicados, distribuidos no quadro transmitido em padrões bi-dimensionais. A formulação genérica é concretizada para o estimador bi-dimensional LS-DFT, permitindo aferir da exactidão da formulação analítica quando comparada com os valores obtidos por simulação do sistema abordado. Os algoritmos de estimação investigados tiram partido da presença de pilotos dedicados presentes nos quadros transmitidos para estimar com precisão os parâmetros pretendidos. Pela sua baixa complexidade, estes algoritmos revelam-se especialmente adequados para implementação em terminais móveis com capacidade computacional e consumo limitados. O desempenho dos algoritmos propostos foi avaliado por meio de simulação do sistema utilizado, recorrendo a modelos aceites de caracterização do canal móvel multipercurso. A comparação do seu desempenho com algoritmos de referência permitir aferir da sua validade. ABSTRACT: The present work focus on the problem of channel estimation and frequency offset estimation in OFDM systems, with different antenna configurations at both the transmitter and the receiver. This thesis presents the theoretical study of the impact of the pilot density in the performance of the channel estimation in OFDM systems and proposes several channel and frequency offset algorithms for OFDM systems with single antenna at both transmitter and receiver, with transmitter diversity and MIMO. The theoretical study results in the analytical formulation of the mean square error of a generic channel estimator for an OFDM system using dedicated pilots, distributed in the transmitted frame in two-dimensional patterns. The generic formulation is implemented for the two-dimensional LS-DFT estimator to verify the accuracy of the analytical formulation when compared with the values obtained by simulation of the discussed system. The investigated estimation algorithms take advantage of the presence of dedicated pilots present in the transmitted frames to accurately estimate the required parameters. Due to its low complexity, these algorithms are especially suited for implementation in mobile terminals with limited processing power and consumption. The performance of the proposed algorithms was evaluated by simulation of the used system, using accepted multipath mobile channel models. The comparison of its performance with the one of reference algorithms measures its validity.

Radiological imaging in digital systems: the effect of exposure parameters in diagnostic quality and patient dose

Esta tese pretende contribuir para o estudo e análise dos factores relacionados com as técnicas de aquisição de imagens radiológicas digitais, a qualidade diagnóstica e a gestão da dose de radiação em sistema de radiologia digital. A metodologia encontra-se organizada em duas componentes. A componente observacional, baseada num desenho do estudo de natureza retrospectiva e transversal. Os dados recolhidos a partir de sistemas CR e DR permitiram a avaliação dos parâmetros técnicos de exposição utilizados em radiologia digital, a avaliação da dose absorvida e o índice de exposição no detector. No contexto desta classificação metodológica (retrospectiva e transversal), também foi possível desenvolver estudos da qualidade diagnóstica em sistemas digitais: estudos de observadores a partir de imagens arquivadas no sistema PACS. A componente experimental da tese baseou-se na realização de experiências em fantomas para avaliar a relação entre dose e qualidade de imagem. As experiências efectuadas permitiram caracterizar as propriedades físicas dos sistemas de radiologia digital, através da manipulação das variáveis relacionadas com os parâmetros de exposição e a avaliação da influência destas na dose e na qualidade da imagem. Utilizando um fantoma contrastedetalhe, fantomas antropomórficos e um fantoma de osso animal, foi possível objectivar medidas de quantificação da qualidade diagnóstica e medidas de detectabilidade de objectos. Da investigação efectuada, foi possível salientar algumas conclusões. As medidas quantitativas referentes à performance dos detectores são a base do processo de optimização, permitindo a medição e a determinação dos parâmetros físicos dos sistemas de radiologia digital. Os parâmetros de exposição utilizados na prática clínica mostram que a prática não está em conformidade com o referencial Europeu. Verifica-se a necessidade de avaliar, melhorar e implementar um padrão de referência para o processo de optimização, através de novos referenciais de boa prática ajustados aos sistemas digitais. Os parâmetros de exposição influenciam a dose no paciente, mas a percepção da qualidade de imagem digital não parece afectada com a variação da exposição. Os estudos que se realizaram envolvendo tanto imagens de fantomas como imagens de pacientes mostram que a sobreexposição é um risco potencial em radiologia digital. A avaliação da qualidade diagnóstica das imagens mostrou que com a variação da exposição não se observou degradação substancial da qualidade das imagens quando a redução de dose é efectuada. Propõe-se o estudo e a implementação de novos níveis de referência de diagnóstico ajustados aos sistemas de radiologia digital. Como contributo da tese, é proposto um modelo (STDI) para a optimização de sistemas de radiologia digital.