Quantum theoretic explanation of the Schwarz-Hora effect

Following the path-integral approach we show that the Schwarz-Hora effect is a one-electron quantum-mechanical phenomenon in that the de Broglie wave associated with a single electron is modulated by the oscillating electric field. The treatment brings out the crucial role played by the crystal in providing a discontinuity in the longitudinal component of the electric field. The expression derived for the resulting current density shows the appropriate oscillatory behaviour in time and distance. The possibility of there being a temporal counterpart of Aharonov-Bohm effect is briefly discussed in this context.

Natural modes of a coupled non-linear system

The natural modes of a non-linear system with two degrees of freedom are investigated. The system, which may contain either hard or soft springs, is shown to possess three modes of vibration one of which does not have any counterpart in the linear theory. The stability analysis indicates the existence of seven different modal stability patterns depending on the values of two parameters of non-linearity.

A fast time-domain algorithm for the assessment of tissue blood flow in laser-Doppler flowmetry

In this study, we derive a fast, novel time-domain algorithm to compute the nth-order moment of the power spectral density of the photoelectric current as measured in laser-Doppler flowmetry (LDF). It is well established that in the LDF literature these moments are closely related to fundamental physiological parameters, i.e. concentration of moving erythrocytes and blood flow. In particular, we take advantage of the link between moments in the Fourier domain and fractional derivatives in the temporal domain. Using Parseval's theorem, we establish an exact analytical equivalence between the time-domain expression and the conventional frequency-domain counterpart. Moreover, we demonstrate the appropriateness of estimating the zeroth-, first- and second-order moments using Monte Carlo simulations. Finally, we briefly discuss the feasibility of implementing the proposed algorithm in hardware.

Corporate Governance in European Banks: Essays on Bank Ownership

Banks are important as they have a central role in the financial system, where funds are channelled either through financial intermediaries, such as banks, or through financial markets, hence promoting growth in any economy. Recently, we have been reminded of the drawbacks of the central role of banks. The current financial crisis, which started out as a sub-prime mortgage crisis in the US, has become a global financial crisis with substantial impact on the real economy in many countries. Some of the roots to the current financial crisis can be sought in the changing role of banks and in bank corporate governance. Moreover, the substantial revitalising measures taken have been justified by the central role of banks. Not only are banks important, they are also very special. The fact that banks are regulated in conjunction with greater opacity, make bank corporate governance different from corporate governance in non-bank companies. Surprisingly little is, however, known about bank corporate governance, in particularly, in a European setting. Hence, the objective of this doctoral thesis is to provide new insights in this research area by examining banks from 37 different European countries. Each of the three essays included in the doctoral thesis examines a particular aspect of bank corporate governance. In the first essay the interaction between the regulatory environment a bank operates in and its ownership structure is explored. Indicators of the severity of the moral hazard problem induced by the deposit insurance system and implicit too-big-to-fail government guarantee, particular features of deposit insurance systems as well as legal protection of shareholders, legal origin of a country and level of integration to the European community are used in the analysis. The empirical findings confirm previous findings on the link between legal protection of shareholders and ownership structure. Moreover, they show that differences in deposit insurance system features can explain some of the differences in ownership structure across European banks. In the second essay the impact of management and board ownership on the profitability of banks with different strategy is examined. The empirical findings suggest that the efficiency of these two particular corporate governance mechanisms varies with the characteristics of the agency problem faced by the bank. More specifically, management ownership is important in opaque non-traditional banks, whereas board ownership is important in traditional banks, where deposit insurance reduces the monitoring incentives of outsiders. The higher profitability does, however, go together with higher risk. In the third essay the profitability and risk of commercial, savings and cooperative banks are compared. The empirical findings suggest that distinct operational and ownership characteristics rather than only the mere fact that a bank is a commercial, savings or cooperative bank explain the profitability and risk differences. The main insight from the three essays is that a number of different aspects should be addressed simultaneously in order to give the complexity of bank corporate governance justice.

Corporate Funding on the European Debt Capital Market

The integrated European debt capital market has undoubtedly broadened the possibilities for companies to access funding from the public and challenged investors to cope with an ever increasing complexity of its market participants. Well into the Euro-era, it is clear that the unified market has created potential for all involved parties, where investment opportunities are able to meet a supply of funds from a broad geographical area now summoned under a single currency. Europe’s traditionally heavy dependency on bank lending as a source of debt capital has thus been easing as corporate residents are able to tap into a deep and liquid capital market to satisfy their funding needs. As national barriers eroded with the inauguration of the Euro and interest rates for the EMU-members converged towards over-all lower yields, a new source of debt capital emerged to the vast majority of corporate residents under the new currency and gave an alternative to the traditionally more maturity-restricted bank debt. With increased sophistication came also an improved knowledge and understanding of the market and its participants. Further, investors became more willing to bear credit risk, which opened the market for firms of ever lower creditworthiness. In the process, the market as a whole saw a change in the profile of issuers, as non-financial firms increasingly sought their funding directly from the bond market. This thesis consists of three separate empirical studies on how corporates fund themselves on the European debt capital markets. The analysis focuses on a firm’s access to and behaviour on the capital market, subsequent the decision to raise capital through the issuance of arm’s length debt on the bond market. The specific areas considered are contributing to our knowledge in the fields of corporate finance and financial markets by considering explicitly firms’ primary market activities within the new market area. The first essay explores how reputation of an issuer affects its debt issuance. Essay two examines the choice of interest rate exposure on newly issued debt and the third and final essay explores pricing anomalies on corporate debt issues.

On the Importance of Mutual Fund Families in Emerging Markets

This study contributes to the mutual fund literature by looking at performance persistence on a fund family level, allowing for individual equity, bond and balanced funds to be included under single family umbrellas. The study is conducted on the emerging Finnish mutual fund market, an environment in which the importance of superior fund family teams is likely to be accentuated. Using both non–parametric and parametric tests we find robust evidence of performance persistence for the fund families. Persistence is particularly strong in the first half of the investigation period, which highlights the importance of fund families at early stages of market development.

Solution structure of O-glycosylated C-terminal leucine zipper domain of human salivary mucin (MUC7)

Solution structures of a 23 residue glycopeptide II (KIS* RFLLYMKNLLNRIIDDMVEQ, where * denotes the glycan Gal-beta-(1-3)-alpha-GalNAc) and its deglycosylated counterpart I derived from the C-terminal leucine zipper domain of low molecular weight human salivary mucin (MUC7) were studied using CD, NMR spectroscopy and molecular modeling. The peptide I was synthesized using the Fmoc chemistry following the conventional procedure and the glycopeptide II was synthesized incorporating the O-glycosylated building block (N alpha-Fmoc-Ser-[Ac-4,-beta-D-Gal-(1,3)-Ac(2)alpha-D-GalN(3)]-OPfp) at the appropriate position in stepwise assembly of peptide chain. Solution structures of these glycosylated and nonglycosylated peptides were studied in water and in the presence of 50% of an organic cosolvent, trifluoroethanol (TFE) using circular dichroism (CD), and in 50% TFE using two-dimensional proton nuclear magnetic resonance (2D H-1 NMR) spectroscopy. CD spectra in aqueous medium indicate that the apopeptide I adapts, mostly, a beta-sheet conformation whereas the glycopeptide II assumes helical structure. This transition in the secondary structure, upon glycosylation, demonstrates that the carbohydrate moiety exerts significant effect on the peptide backbone conformation. However, in 50% TFE both the peptides show pronounced helical structure. Sequential and medium range NOEs, C alpha H chemical shift perturbations, (3)J(NH:C alpha H) couplings and deuterium exchange rates of the amide proton resonances in water containing 50% TFE indicate that the peptide I adapts alpha-helical structure from Ile2-Val21 and the glycopeptide II adapts alpha-helical structure from Ser3-Glu22. The observation of continuous stretch of helix in both the peptides as observed by both NMR and CD spectroscopy strongly suggests that the C-terminal domain of MUC7 with heptad repeats of leucines or methionine residues may be stabilized by dimeric leucine zipper motif. The results reported herein may be invaluable in understanding the aggregation (or dimerization) of MUC7 glycoprotein which would eventually have implications in determining its structure-function relationship.

Fate of the superconducting ground state on the Moyal plane

It is known that Berry curvature of the band structure of certain crystals can lead to effective noncommutativity between spatial coordinates. Using the techniques of twisted quantum field theory, we investigate the question of the formation of a paired state of twisted fermions in such a system. We find that to leading order in the noncommutativity parameter, the gap between the non-interacting ground state and the paired state is smaller compared to its commutative counterpart. This suggests that BCS type superconductivity, if present in such systems, is more fragile and easier to disrupt. (C) 2010 Elsevier B.V. All rights reserved.

Dynamics and local structure of colossal magnetoresistance manganites

We report Extended X-ray Absorption Fine Structure and anelastic spectroscopy measurements on on hole doped manganese oxides La1-xCaxMnO3 which present the colossal magnetoresistance effect. EXAFS measurements were realized both in the absence and presence of an applied magnetic field of 1.1 Tesla, in a wide temperature range (between 330 and 77 K) and at various dopings (x = 0.25 and x = 0.33). The magnetic field orders the magnetic moments so favouring the electron mobility and the reduction of Mn-O octahedra distortions. We observe the presence of four short and two long Mn-O distances (1.93 and 2.05 Angstrom respectively) above and also below the metal-insulator phase transition. The overall distortion decreases but does not completely disappear in the metallic phase suggesting the possible coexistence of metallic and insulating regions at low temperatures. The magnetic field reduces the lattice distortions showing evidence of a microscopic counterpart of the macroscopic colossal magnetoresistance. We also present preliminary anelastic relaxation spectra in a wide temperature range from 900 K to 1 K on a sample with x = 0.40, in order to study the structural phase transitions and the lattice dynamics. A double peak has been observed at the metal-insulator transition in the imaginary part of Young's modulus. This double peak indicates that the metal-insulator transition could be a more complex phenomenon than a simple second order phase transition. In particular the peak at lower temperatures can be connected with the possible presence of inhomogeneous phase structures. Another intense dissipation peak has been observed corresponding to the structural orthorhombic-trigonal transition around 750 K.

The link between foreign aid, public investment and economic growth

Länsimaat ovat rahoittaneet kehitysyhteistyöhankkeita jo lähes kuuden vuosikymmenen ajan, mutta kehitysavun tehokkuudesta ei olla edelleenkään päästy yksimielisyyteen. Yksi avunantajamaiden tapa vaikuttaa kehitysavun tehokkuuteen, eli avun vaikutukseen vastaanottajamaan taloudellisen kasvun kiihdyttäjänä, on sitoa ne julkisen sektorin infrastruktuurihankkeisiin. Joissain tapauksissa tämä vaikuttaa avun vastaanottajan käytökseen ja asenteisiin kehitysapua kohtaan. Tutkielmassa käsitellään kehitysavun tehokkuutta tilanteessa, jossa se on sidottu julkisen sektorin investointeihin kehitysmaassa. Tutkimus pohjaa Kalaitzidakisin ja Kalyvitisin (2008) malliin, jossa osa kehitysmaan julkisen talouden investoinneista rahoitetaan kehitysavulla. Seuraavaksi tarkastellaan ylijäämää tavoittelevan käyttäytymisen (rent- seeking) vaikutusta kehitysavun tehokkuuteen pohjaten Economidesin, Kalyvitisin ja Philippopoulosin (2008) malliin. Tutkielmassa referoidaan lisäksi tutkimuskysymystä sivuavia empiirisiä tutkimuksia, esitellään aluksi tavallisimmat kehitysyhteistyön muodot, sekä esitellään talousteoreettisia näkökulmia kehitysyhteistyön tehokkuuden määrittelylle. Tutkielma perustuu puhtaasti teoreettisiin malleihin ja niissä sovelletut menetelmät ovat matemaattisia. Tutkielmassa käsitellään ensin tapaus, jossa kehitysyhteistyöllä rahoitetaan julkisen sektorin investointihankkeita. Jossain tapauksissa kehitysavun kasvu lasku siirtää vastaanottajamaan kulutusta julkisista investoinneista kulutukseen, jolloin kehitysyhteistyövaroin osittain rahoitettujen hankkeiden koko pienenee, ja suhteellinen tehokkuus laskee. Seuraavaksi tarkastellaan tilannetta, jossa kehitysyhteistyövaroista vain osa päätyy hankkeen rahoittamiseen, ja todetaan, että kehitysavun tehokkuus ja vaikutus maan kansantulon kasvuun vähenee talouden toimijoiden ylijäämää tavoittelevan käyttäytymisen (mukaan lukien korruptio) myötä entisestään. Tämän tutkimuksen perusteella voidaan todeta, että kehitysapu vaikuttaa kehittyvän maan talouden kasvuun tapauksessa, jossa julkisia infrastruktuurihankkeita rahoitetaan osittain maan omin verovaroin ja osittain kehitysyhteistyövaroin. Ylijäämää tavoitteleva käyttäytyminen vaikuttaa kehitysavun tehokkuuteen negatiivistesti vähentäen kehitysavun positiivisia kasvuvaikutuksia.

Polymeereillä stabiloitu amorfinen formulaatio

Nowadays growing number of new active pharmaceutical ingredients (API) have large molecular weight and are hydrophobic. The energy of their crystal lattice is bigger and polarity has decreased. This leads to weakened solubility and dissolution rate of the drug. These properties can be enhanced for example by amorphization. Amorphous form has the best dissolution rate in the solid state. In the amorphous form drug molecules are randomly arranged, so the energy required to dissolve molecules is lower compared to the crystalline counterpart. The disadvantage of amorphous form is that it is unstable. Amorphous form tends to crystallize. Stability of amorphous form can be enhanced by adding an adjuvant to drug product. Adjuvant is usually a polymer. Polymers prevent crystallization both by forming bonds with API molecules and by steric hindrance. The key thing in stabilizing amorphous form is good miscibility between API and polymer. They have to be mixed in a molecular level so that the polymer is able to prevent crystallization. The aim of this work was to study miscibility of drug and polymer and stability of their dispersion with different analytical methods. Amorphous dispersions were made by rotary evaporator and freeze dryer. Amorphicity was confirmed with X-ray powder diffraction (XRPD) right after preparation. Itraconazole and theophylline were the chosen molecules to be stabilized. Itraconazole was expected to be easier and theophylline more difficult to stabilize. Itraconazole was stabilized with HPMC and theophylline was stabilized with PVP. Miscibility was studied with XRPD and differential scanning calorimetry (DSC). In addition it was studied with polarized light microscope if miscibility was possible to see visually. Dispersions were kept in stressed conditions and the crystallization was analyzed with XRPD. Stability was also examined with isothermal microcalorimetry (IMC). The dispersion of itraconazole and theophylline 40/60 (w/w) was completely miscible. It was proved by linear combination of XRPD results and single glass transition temperature in DSC. Homogenic well mixed film was observed with light microscope. Phase separation was observed with other compositions. Dispersions of theophylline and PVP mixed only partly. Stability of itraconazole dispersions were better than theophylline dispersions which were mixed poorer. So miscibility was important thing considering stability. The results from isothermal microcalorimetry were similar to results from conventional stability studies. Complementary analytical methods should be used when studying miscibility so that the results are more reliable. Light microscope is one method in addition to mostly used XRPD and DSC. Analyzing light microscope photos is quite subjective but it gives an idea of miscibility. Isothermal microcalorimetry can be one option for conventional stability studies. If right conditions can be made where the crystallization is not too fast, it may be possible to predict stability with isothermal microcalorimetry.

Effects of Parasitics and Interface Traps on Ballistic Nanowire FET in the Ultimate Quantum Capacitance Limit

In this paper, we focus on the performance of a nanowire field-effect transistor in the ultimate quantum capacitance limit (UQCL) (where only one subband is occupied) in the presence of interface traps (D-it), parasitic capacitance (C-L), and source/drain series resistance (R-s,R-d), using a ballistic transport model and compare the performance with its classical capacitance limit (CCL) counterpart. We discuss four different aspects relevant to the present scenario, namely: 1) gate capacitance; 2) drain-current saturation; 3) subthreshold slope; and 4) scaling performance. To gain physical insights into these effects, we also develop a set of semianalytical equations. The key observations are as follows: 1) A strongly energy-quantized nanowire shows nonmonotonic multiple-peak C-V characteristics due to discrete contributions from individual subbands; 2) the ballistic drain current saturates better in the UQCL than in the CCL, both in the presence and absence of D-it and R-s,R-d; 3) the subthreshold slope does not suffer any relative degradation in the UQCL compared to the CCL, even with Dit and R-s,R-d; 4) the UQCL scaling outperforms the CCL in the ideal condition; and 5) the UQCL scaling is more immune to R-s,R-d, but the presence of D-it and C-L significantly degrades the scaling advantages in the UQCL.

Electron-beam weld microstructures and properties of aluminium-lithium alloy 8090

Lithium-containing aluminium alloys are of considerable current interest in the aerospace and aircraft industries because lithium additions to aluminium improve the modulus and decrease the density compared to conventional aluminium alloys. Few commercial aluminium-lithium alloys have emerged for use in the aerospace industry. One such candidate is 8090, a precipitation-hardenable Al-Li-Cu-Mg alloy. The influence of electron-beam welding on the microstructure and mechanical properties of alloy 8090 material has been evaluated through microscopical observations and mechanical tests. Microscopic observations of the electronbeam welds revealed an absence of microporosity and hot cracking, but revealed presence of microporosity in the transverse section of the weld. Mechanical tests revealed the electronbeam weld to have lower strength, elongation and joint efficiency. A change in microscopic fracture mode was observed for the welded material when compared to the unwelded counterpart. An attempt is made to rationalize the behaviour in terms of competing mechanistic effects involving the grain structure of the material, the role of matrix deformation characteristics, grain-boundary chemistry and grain-boundary failure.

Uutta, vanhaa ja lainattua : Tampereen Kaupunkilähetyksen kristillissosiaalisen työn asemoituminen hyvinvointivaltion rakentumisessa vuosina 1939−1973

The main purpose of this study was to provide a full account of the Christian social work carried out at the Tampere City Mission (TCM) as well as the Missions sphere of operations from the Second World War to the early 1970s, comprising a period of significant change. The study consists of charting the processes of change and connections within the activities of the TCM and how examining these were linked to the general tendencies of the period, in lay work, social work, professionalization and the representation of gender. The positioning of the activities is described on the basis of these tendencies. The main sources for the study were the archives of the Mission, for example the minutes of meetings, correspondences as well as annual reports, and the archives of its partners, such as the City of Tampere, the Evangelical Lutheran parishes of Tampere and the State Welfare Administration. The archives of the Helsinki, Turku and Stockholm Missions supplied comparison reference and other material. In particular, social welfare and Christian social work technical journals of were used as printed sources. The principal method used was the genetic method of historiology. The research subject was also evaluated from the point of view of third sector research in addition to that of professionalization studies and gender studies. By the beginning of the research period, the TCM had turned more and more dedicatedly into a multipurpose social service organization maintaining social services such as old people s homes and children´s homes. This development continued, even though new areas of activity emerged and older ones fell into disuse. Social innovations sprang up, marriage counseling being one of them. On the national level, the TCM pioneered the provision of sheltered industrial work for intellectually disabled persons as well as housing services for them. As new activities were initiated, they overlapped with the established ones, and the TCM handed some of its child protection functions over to the municipality, in accordance with the current adaptation theory. The use of its own property to produce ever-changing social services may be the reason why the association s work continued on with vitality. Functional networks and political aid in the field of social services also bolstered the association. As in other Nordic countries, nonprofit organizations served as partners rather than competitors, with the State establishing institutional welfare arrangements. In the 1960s the municipal takeover of social services impacted the TCM activities. Rules for government subsidies and municipal allowances were not well established; hence these funds were not easily available, making improvements difficult. The TCM was a community in which women had a relatively strong position and an opportunity to make a difference. Female staff were reasonably equal to men, and women worked as heads of a several institutions. Care work employed a number of men, which went against the traditional segregation of labour between the sexes. The TCM s operations were from early on very professionalized, and were developed with particular care. Keywords: Christian social work, third sector, professionalization, gender

Time-domain-finite-wave analysis of the engine exhaust system by means of the stationary-frame method of characteristics. Part I. Theory

Time-domain-finite-wave analysis of the engine exhaust system is usually done using the method of characteristics. This makes use of either the moving frame method, or the stationary frame method. The stationary frame method is more convenient than its counterpart inasmuch as it avoids the tedium of graphical computations. In this paper (part I), the stationary-frame computational scheme along with the boundary conditions has been implemented. The analysis of a uniform tube, cavity-pipe junction including the engine and the radiation ends, and also the simple area discontinuities has been presented. The analysis has been done accounting for wall friction and heat-transfer for a one-dimensional unsteady flow. In the process, a few inconsistencies in the formulations reported in the literature have been pointed out and corrected. In the accompanying paper (part II) results obtained from the simulation are shown to be in good agreement with the experimental observations.