Performance, carcass characteristics and non-carcass components of Texel × Santa Inês lambs fed fat sources and monensin

Performance, carcass, non-carcass and commercial cuts and components of Texel × Santa Inês crossbred lambs, managed in confinement and fed diets based on soybean oil, soybeans and a conventional diet, with or without the use of monensin (78 ppm dry matter basis) were evaluated. Thirty-six Texel × Santa Inês lambs (18 males and 18 females) were managed in intensive systems. Animals were slaughtered after 87 days of confinement, and performance, carcass characteristics, weight and percentages of carcass and non-carcass components were evaluated. The animals fed the control diet had heavier carcass and parts than animals fed soybean, while the oil diet did not differ from the controls in most parameters. The animals fed soybean showed lower intake kg dry matter (DM), organic matter (OM), crude protein (CP), neutral detergent fiber (NDF) and metabolizable energy (ME) compared with animals fed the control diet, increased ether extract (EE) intake in kg, % body weight (BW) and metabolic weight (MW) and did not differ from the soybean oil diet. Animals receiving monensin had lower DM intake, OM, CP, EE, NDF, gross energy (GE) regardless of the expression, % kg BW, or % PM, than the animals that did not receive the additive. Males produced better and had heavier cuts than the females; the latter deposited subcutaneous fat earlier. Animals that received oil or soybean showed greater body weight and small intestine percentage. Soybean oil intake did not improve performance, carcass weights or parts of Santa Ines × Texel lambs in confinement. Soybeans at 15% dry matter reduced energy intake and lamb performance. The use of monensin at 78 ppm on a dry matter basis is not recommended for lambs in confinement, especially if associated with oil or soybeans that may harm animal performance.

Technicolor contribution to lepton plus photon+E-T events at the Fermilab Tevatron

Events with one lepton, one photon, and missing energy are the subject of recent searches at the Fermilab Tevatron. We compute possible contributions to these types of events from the process pp ->gamma l nu(l)nu(tau)nu(tau), where l=e, mu in the context of a low scale technicolor model. We find that with somewhat tighter cuts than the ones used in the CDF search, it could be possible to either confirm or exclude this model in a small region of its parameter space.

Estudo neuroanatômico do éncefalo bovino por ressonância magnética

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Resistência ao cisalhamento de diferentes sistemas adesivos no esmalte dental

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Características da carcaça e alometria dos tecidos de cabritos F1 Boer × Saanen

Com o objetivo de avaliar as características de carcaça e a alometria dos cortes comerciais e dos tecidos de cabritos F1 Boer × Saanen, 35 animais foram abatidos ao atingirem 5, 10, 15, 20 e 25 kg de peso vivo (PV). A dieta dos animais foi composta de leite de vaca nos primeiros 49 dias e ração à vontade do sétimo dia até o abate. Os cortes foram obtidos após o resfriamento da carcaça e a perna foi dissecada em músculo, osso e gordura. O PV teve efeito linear decrescente no rendimento de carcaça fria e na área de olho-de-lombo por kg de carcaça. Os pesos de perna, paleta e pescoço em relação à carcaça fria decresceram linearmente, mas houve efeito quadrático sobre o rendimento de costelas e lombo. O crescimento de paleta, pescoço e perna foi isométrico (b=1) ao do corpo, enquanto o das costelas e do lombo foi mais lento (b¹ 1). Os músculos da perna cresceram igualmente, a gordura mais lenta e os ossos mais rapidamente que a perna, enquanto o desenvolvimento da gordura subcutânea foi mais tardio que o da intermuscular. Para obtenção de carcaça de 8 a 11 kg com rendimento superior a 44%, boa proporção de músculo e gordura com menor perda durante o resfriamento, recomenda-se abater os animais com PV entre 20 e 25 kg, mas, se o objetivo for carcaça de menor peso, o abate dos animais deve ser feito ao final do aleitamento com aproximadamente 10 kg de peso corporal.

Chicken meat consumer profile in northwestern São Paulo State, Brazil

Brazil is the world’s first chicken meat exporter nowadays. The maintenance of this position requires a constant quality attributes evolution. This work evaluated the chicken meat consumer profile in the northwest region of São Paulo state, the most important Brazilian poultry meat consumer market, in order to provide information to the productive sector. The data were collected using 482 interviews and questionnaires that were answered by e-mail. The questionnaires involved questions related to the consumer identification, habits and preferences and their knowledge about food safety, production system, sustainability and animal welfare. Most of the consumers, 62%, were female, with ages ranging from 20 to 50 years. Beef was preferred by the majority of the answerers and chicken and pork meat were together the second choice. Only 2% of the interviewed consumers mentioned not enjoying poultry meat. The main part of consumers, 67%, prefer to buy breast and leg cuts and only 11% are used to buy the whole poultry carcass. More than 60% of the interviewed have already eaten free range chicken meat, but the majority of them, 89%, are used to consume regular industrialized poultry. About 75% of the consumers believe hormones are used to grow the birds. Over 80% of people observe the expiration date before buying the product, but only 55% check if it has the stamp of the official inspection service. Color and appearance of meat are the most important factors that influence the consumer’s choice. The amount of water that drips on the tray is a rejection factor to 88% of answerers. Most of them, 66%, prefer lighter colored meat. Only 27% of them believe that chicken meat causes an environmental impact and 48% do not know the meaning of animal welfare. More than half of the interviewed do not consider animal welfare aspects before consuming any kind of meat. From these results obtained, it is possible to conclude that any effort to improve the product quality, mainly concerned to animal welfare and sustainability aspects, requires prior educational initiatives.

Atributos químicos no solo e produção de Cynodon dactylon cv. Tierra Verde sob doses de biofertilizante orgânico

The concentration of nutrients in plant is related to the soil, fertilization, climate, season, cultivar and cultural practices. Aiming to evaluate the soil chemical properties, the dry matter production of shoots and roots, nutrient content in the plant and the chemical composition of the grass Tierra Verde subjected to levels of organic biofertilizer as nitrogen source, an experiment was conducted in a greenhouse at the Faculty of Veterinary Medicine , UNESP, Araçatuba-SP, January-September 2010. Treatments were arranged in a completely randomized design with six fertilized biofertilizer doses (0, 33, 66, 132, 264, 528 m3 ha-1) and five repetitions for three cuts. We used the model split plot, with doses of biofertilizer considered as main treatments and cuts as sub-plots. We obtained a linear response in the production of dry mass of shoots and roots to the dose of 528 m3 ha-1 of organic biofertilizer. Nitrogen fertilization influenced the soil chemical properties and levels of organic matter, sulfur, boron and manganese, and in foliar levels of phosphorus, potassium and copper. The chemical composition was not altered by the influence of organic biofertilizer doses applied to the soil.

Adição de plasma bovino em salmouras para injeção de coxão duro bovino (m. Biceps femoris) e seus efeitos no pH e na carga microbiana de bifes cozidos embalados à vácuo e mantidos sob refrigeração

The physical (pH) and microbiological (psychotrofi c microorganisms and lactic bacteria) characteristics of beef outside round (m. Biceps femoris) injected (15%) with brines free of polyphosphates containing and sodium lactate or sodium lactate and sodium diacetate and liquid bovine plasma (PLL and PLO) or dehydrated bovine plasma (PDL, PDO) were evaluated along with beef cuts injected with brines free from plasma, but containing polyphosphates and bacteriostatic agents (CL and CO) and non injected beef cuts (IN), comprising seven treatments of cooked and vacuum packaged beef steaks stored under refrigeration (6ºC) during 43 days. No differences in pH were detected among raw or cooked injected treatments, although IN showed lower pH value in raw beef cuts. The addition of liquid or dehydrated bovine plasma did not affect the microbial load after whole muscles pasteurization, but increased the bacterial counts in cooked beef steaks during refrigerated storage, comparing to treatments with no plasma addition (CL and CO). The storage temperature (6ºC), usually found during commercialization of meat increased the microorganisms growth rate affecting the microbiological quality, especially when plasma was added to the brine.

Características qualitativas da carne de frango de corte proveniente de diferentes sistemas de produção

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desempenho e qualidade da carne de bovinos cruzados alimentados com diferentes dietas em confinamento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise retrospectiva da implantação do serviço de inspeção municipal de Rio Verde – GO e de microrganismos patogenicos em produtos cárneos

Pós-graduação em Medicina Veterinária - FCAV

Parâmetros construtivos de kirigami tridimensional de 90 graus de abertura

Origami folds and kirigami cuts merged in an oriental technique called Origamic Architecture (or 3D kirigami) that has intrinsic relationships with geometry as well as these paper arts. Despite its potential, it is not very used as a didactic resource because of the lack of parameters in its construction. There are many studies about programs development and computational language to help the design of pop-up structures, as origamic architecture is also known. However, there are few studies concerning the study of positioning the lines and creases, which is essential in the process of creating a 3D kirigami design, especially in the development of spatial perception of the figure. Limited to the 90o open type models, this article is about the establishment of some initial guidelines for design of an origamic architecture through visual elements as point, line and shape. It is presented some basic models to illustrate the constructive parameters detected as well as some models elaborated by the author, showing the viability of the guidelines established.

Origami e kirigami: arte e cultura como recurso lúdico e educativo

We can know a people through their cultural and artistic assets. One of the many aspects of Japanese culture is origami, a fusion of the verb “oru”, which means folding, with the word “kami” meaning paper. In this communication, we describe the course “Origami and Kirigami: art and culture as a recreational and educational resource”. The course aimed to present these two oriental techniques based on paper and its potential as a source of entertainment and education, at the same time seeking to introduce cultural aspects of these arts of folding and/or cutting paper. This practice is more common than we realize, and is present in our day-to-day life when we perform actions such as folding clothes and papers, and making packages, amongst others. However, few are aware of the benefits that this folding brings to the fields of Arts, Mathematics, and Science, besides its recreational characteristics. Kirigami is a mixed technique that in addition to using folds in the paper (as in origami) also uses cuts (“kiru” – meaning, “cut”). It can be performed with heavier paper than origami, and by introducing some cuts, the paper can be folded to form the desired shape. It is a simple technique, with impressive results. We conducted eight weekly meetings, each lasting four hours, totaling 32 hours of coursework. In addition to the classes, a visit was made to the Okinawa Club in Bauru (São Paulo), where it was possible for the students of the course and the elderly group (fujinkai) of origamists of the club to exchange experiences. Finally, an exhibition was organized to display the artifacts produced by the course participants and disseminate the work of the students.

Desempenho de bovinos cruzados terminados em confinamento e qualidade dos músculos longissimus e semitendinosus in natura e maturados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Quantificação de enterobactérias e Clostridium spp. e detecção molecular de Clostridium perfringens, Escherichia coli e Salmonella spp. em pontos de cadeia produtiva da carne de frango

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)