Francisco Franco, articulista de incógnito (1945–1960)

Se trata de un análisis pormenorizado de los artículos publicados por Francisco Franco en el periódico Arriba entre los años 1945 y 1960 bajo los seudónimos de Jakim Boor, Hispanicus y Macaulay. Se lleva a cabo su disección en dos grandes categorías: enemigos del Régimen y política, economía y sociedad. Para ello, se toma como ejemplo el propio artículo de Hispanicus titulado “Lo político, lo económico y lo social”. En la primera de las dos grandes categorías se agrupan todos aquellos elementos abstractos -instituciones o ideologías- que Franco consideraba perjudiciales para la España que él gobernaba o que históricamente habían sido hostiles a este país; en la segunda se recogen el comentario sobre política en términos actuales o generales, las situaciones económicas y sociales así como los numerosos fragmentos de Historia de España que el dictador gustaba de incluir en sus colaboraciones periodísticas.

Radiological characterization of clay mixed red mud in particular as regards its leaching features

The reuse of industrial by-products such as red mud is of great importance. In the case of the building material industry the reuse of red mud requires a cautious attitude, since the enhanced radionuclide content of red mud can have an effect on human health. The natural radionuclide content of red mud from the Ajka red mud reservoir and the clay sample from a Hungarian brick factory were determined by gamma spectrometry. It was found that maximum 27.8% red mud content can be added to fulfil the conditions of the EU-BSS. The effect of heat treatment was investigated on a red mud-clay mixture and it was found that in the case of radon and thoron exhalation the applied heat reduced remarkably the exhalation capacities. The leaching features of red mud and different mixtures were studied according to the MSZ-21470-50 Hungarian standard, the British CEN/TS 14429 standard and the Tessier sequential extraction method. The Tessier method and the MSZ-21470-50 standard are suitable for the characterization of materials; however, they do not provide enough information for waste deposition purposes. To this end, we propose using the CEN/TS 14429 method, because it is easy to use, and gives detailed information about the material's behaviour under different pH conditions, however, further measurements are necessary.

Rehydroxylation Dating: Assessment for Archaeological Application

Investigations are carried out into the mass gain behaviour of fired clay ceramics following drying (130°C) and reheating (500°C), and the application of these mass gain properties to the dating of archaeological ceramics using a modified rehydroxylation dating (RHX) methodology, a component based approach. Gravimetric analysis is conducted using a temperature and humidity controlled glove box arrangement (featuring a top-loading balance) on eighteen samples of varied known ages and contexts; this occurs following transfer from environmentally controlled chambers where subsamples of these samples are aged at three temperatures (25°C, 35°C, 45°C) following drying and reheating. The sample set consists principally of post-medieval bricks, but also includes some post-medieval pottery as well as both Etruscan and Roman ceramics. A suite of techniques are applied to characterise these ceramics, including XRD, FTIR, p-XRF, thin-section petrography, BET analysis, TG-MS and permeametry.

Technology is Set to Change Real Estate Forever

Major developments in the technological environment can become commonplace very quickly. They are now impacting upon a broad range of information-based service sectors, as high growth Internet-based firms, such as Google, Amazon, Facebook and Airbnb, and financial technology (Fintech) start-ups expand their product portfolios into new markets. Real estate is one of the information-based service sectors that is currently being impacted by this new type of competitor and the broad range of disruptive digital technologies that have emerged. Due to the vast troves of data that these Internet firms have at their disposal and their asset-light (cloud-based) structures, they are able to offer highly-targeted products at much lower costs than conventional brick-and-mortar companies.

Modelo para la creación de un portal en internet que les facilite a los laboratorios farmaceúticos la promoción médica a través del uso de medios virtuales

La presente investigación se realizó con el propósito de desarrollar un modelo que fuera la base para que los laboratorios farmacéuticos puedan orientar su promoción médica hacia el uso de los recursos tecnológicos actuales como es el internet. Además de proveer un mapa conceptual de los pasos que deben seguir los laboratorios para pasar de los medios tradicionales de promoción médica (Brick) a los medios virtuales e interactivos (Click) a través de la red, es decir, actualmente la promociónmédica se hace a través de los canales tradicionales de comercialización; a esta forma la llamamos "Brick", pero nuestra propuesta permite crear una estrategia para que el laboratorio transforme la promoción médica a través de las tecnologías de comunicación, como el internet, creando un nuevo canal de comercialización, "Click", virtual, en línea. El modelo puede ser aplicado por cualquier laboratorio farmacéutico y no tiene ninguna exclusividad, puesto que es genérico; los principios aplicadosson de conocimiento público. Lo que haría la diferencia entre unportal y otro sería la forma como cada laboratorio enfrente el diseño y la implementación del mismo.

Arquitectura em Terra

A presente dissertação tem como tema central um modelo construtivo de arquitectura em terra, designadamente o tabique. Este modelo construtivo ancestral de alvenarias reserva na sua génese inúmeras particularidades, que vão desde as mais variadas formas de concepção do modelo por parte dos diferentes povos espalhados pelo mundo aos valiosos contributos sociais e ambientais. Na sua essência, o tabique foi muito utilizado por pessoas de parcos recursos económicos em soluções, por vezes muito engenhosas, levando-as a recorrer à mãe natureza para extrair dela os materiais necessários para a construção das suas casas. Um pouco por todo o mundo existem exemplares deste modelo tradicional contribuindo activamente para o enriquecimento dum vasto espólio de arquitectura em terra, matéria esta que tem vindo a ganhar um novo alento de acordo com as actuais “políticas" ecológicas. Deste modo e ao abrigo dos princípios gerais da conservação e restauro do património, o tabique detém informação relevante no que respeita à sustentabilidade do planeta, tornando o tema mais apelativo ao debate e à planificação de novas acções, envolvendo cada vez mais os profissionais em prol de um objectivo que garanta ao planeta um futuro mais próspero e equilibrado.

Socio-economic aspects of the fisheries of Nabugabo lakes and implications for management

Fisheries are very important to Uganda's economy. The sector provides a vital source of food, recreation, trade and socioeconomic well being for the people and community globally. The fisheries of small lakes are important for producing fish for local populations who are not near the large lakes. These satellite lakes support important fisheries and other economic activities like fishing, water for domestic purposes and tourism, besides socio-cultural values. A number-of fish;- species, some of which were found only in Lake Victoria have been depleted through over-exploitation, introduction of exotics especiaily Nile perch and environmental degradation. Some of these fishes have been observed to survive in satellite lakes in the Victoria and Kyoga Lake basins. The Nabugabo satellite lakes (Manywa, Kayugi and Kayanja) contain endemic Cichlid fish species acting as reservoirs and therefore very important for conservation of fish biodiversity. Despite the socio-economic importance and uniqueness of these satellite lakes little research on socio-economic studies has been carried out. The sustainability of the lake is being threatened by increasing human activities. The fish stocks and species diversity are declining and this poses a threat to the livelihood of the people who depend on fish for food and income. Arising from this need a study was carried out to establish the socio-economic aspects of Nabugabo fisheries and implications for management, on which basis resource users would be made aware of the impacts of their activities. It was hoped that this would go further to ensure wise use and management of the resources by the users. The specific objectives were identifying activities around the lake, establishing socioeconomic values attached to the lake, identifying problems of the lake and resource users and examining existing local based management institutions. Results show that the activities taking place around the lakes include fishing, farming, watering of animals, deforestation and charcoal burning, brick making, resort beach development and food and refreshment. The major problem facing the lake was found to be encroachment of Hippo grass (Vossia) on the lake, which is decreasing the size of the lake, and limiting open waters for fishing (this only applied to Lake Nabugabo). Other important problems include use of illegal fishing methods, declining fish stocks and loss of cultural identity. The resource users are most pressed by the low incomes resulting from poor fish catches, theft of gears and lack of market. On examining the resource base for the lakes, it was only Lake Nabugabo that had a Landing Management Committee. The other three lakes did not have leadership institutions in place except the local councils for the respective villages. This was probably due to observed limited fisheries activities. Majority of the respondents agreed that Government and other service providers should work jointly to supplement local beach management committees in the management of the lakes resources. This is a good gesture because with increase in fishing effort and rampant use of illegal fishing methods, there is need to strengthen management institutions present on the lake. This would require Government, local community and other service providers to work together in a participatory way to control environment-degrading activities and stop the use of illegal fishing methods. Burning of vegetation on the lake should be stopped since it enhances growth of this grass. Finally, traditional taboos; which are present on some of the Nabugabo lakes, should be enhanced, as away of preserving them.

Projeto de reforço de um edifício de habitação

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Estruturas

Effects of incomplete combustion on atmospheric chemistry: Black carbon climate forcing and global carbon monoxide emissions

This thesis is actually the composition of two separate studies aimed at further understanding the role of incomplete combustion products on atmospheric chemistry. The first explores the sensitivity of black carbon (BC) forcing to aerosol vertical location since BC has an increased forcing per unit mass when it is located above reflective clouds. We used a column radiative transfer model to produce globally-averaged values of normalized direct radiative forcing (NDRF) for BC over and under different types of clouds. We developed a simple column-weighting scheme based on the mass fractions of BC that are over and under clouds in measured vertical profiles. The resulting NDRF is in good agreement with global 3-D model estimates, supporting the column-weighted model as a tool for exploring uncertainties due to diversity in vertical distribution. BC above low clouds accounts for about 20% of the global burden but 50% of the forcing. We estimate maximum-minimum spread in NDRF due to modeled profiles as about 40% and uncertainty as about 25%. Models overestimate BC in the upper troposphere compared with measurements; modeled NDRF might need to be reduced by about 15%. Redistributing BC within the lowest 4 km of the atmosphere affects modeled NDRF by only about 5% and cannot account for very high forcing estimates. The second study estimated global year 2000 carbon monoxide (CO) emissions using a traditional bottom-up inventory. We applied literature-derived emission factors to a variety of fuel and technology combinations. Combining these with regional fuel use and production data we produced CO emissions estimates that were separable by sector, fuel type, technology, and region. We estimated year 2000 stationary source emissions of 685.9 Tg/yr and 885 Tg/yr if we included adopted mobile sources from EDGAR v3.2FT2000. Open/biomass burning contributed most significantly to global CO burden, while the residential sector, primarily in Asia and Africa, were the largest contributors with respect to contained combustion sources. Industry production in Asia, including brick, cement, iron and steel-making, also contributed significantly to CO emissions. Our estimates of biofuel emissions are lower than most previously published bottom-up estimates while our other fuel emissions are generally in good agreement. Our values are also universally lower than recently estimated CO emissions from models using top-down methods.

Telesia Archaeological Project: Indagini nella basilica e nel foro (2014-2015)

The Telesia Archaeological Project is an initiative that will make a significant contribution to thi historical and archaeological knowledge of the urban area of the Roman city of Telesia, located near Benevento (S. Salvatore Telesino). The first and second season of the Telesia Archaeological Project (2014-2015), conducted under the supervision of the Archaeological Superintendence, and thanks to the indispensable collaboration of a private landowner, provided results of great scientific interest. There was the possibility to investigate part of a significant building of imperial age, richly decorated, identified with the basilica of the city. It was possible to establish, in addition, that this large building (36 by 21 m ca) was opened, through a great brick colonnade, to the forum, localized in summer 2015 with certainty for the first time. The extraordinary large double colonnade (porticus duplex), 9 meters wide, covering the entire façade of that public building, was erased in the fifth century AD, probably after two earthquakes that seriously damaged the city in 346 and 375 AD.

A petrographic investigation into the durability of common replacement sandstones to the crystallisation of de-icing salts

Scottish sandstone buildings are now suffering the long-term effects of salt-crystallisation damage, owing in part to the repeated deposition of de-icing salts during winter months. The use of de-icing salts is necessary in order to maintain safe road and pavement conditions during cold weather, but their use comes at a price. Sodium chloride (NaCl), which is used as the primary de-icing salt throughout the country, is a salt known to be damaging to sandstone masonry. However, there remains a range of alternative, commercially available de-icing salts. It is unknown however, what effect these salts have on porous building materials, such as sandstone. In order to protect our built heritage against salt-induced decay, it is vital to understand the effects of these different salts on the range of sandstone types that we see within the historic buildings of Scotland. Eleven common types of sandstone were characterised using a suite of methods in order to understand their mineralogy, pore structure and their response to moisture movement, which are vital properties that govern a stone’s response to weathering and decay. Sandstones were then placed through a range of durability tests designed to measure their resistance to various weathering processes. Three salt crystallisation tests were undertaken on the sandstones over a range of 16 to 50 cycles, which tested their durability to NaCl, CaCl2, MgCl2 and a chloride blend salt. Samples were primarily analysed by measuring their dry weight loss after each cycle, visually after each cycle and by other complimentary methods in order to understand their changing response to moisture uptake after salt treatment. Salt crystallisation was identified as the primary mechanism of decay across each salt, with the extent of damage in each sandstone influenced by environmental conditions and pore-grain properties of the stone. Damage recorded in salt crystallisation tests was ultimately caused by the generation of high crystallisation pressures within the confined pore networks of each stone. Stone and test-specific parameters controlled the location and magnitude of damage, with the amount of micro-pores, their spatial distribution, the water absorption coefficient and the drying efficiency of each stone being identified as the most important stone-specific properties influencing salt-induced decay. Strong correlations were found between the dry weight loss of NaCl treated samples and the proportion of pores <1µm in diameter. Crystallisation pressures are known to scale inversely with pore size, while the spatial distribution of these micro-pores is thought to influence the rate, overall extent and type of decay within the stone by concentrating crystallisation pressures in specific regions of the stone. The water absorption determines the total amount of moisture entering into the stone, which represents the total amount of void space for salt crystallisation. The drying parameters on the other hand, ultimately control the distribution of salt crystallisation. Those stones that were characterised by a combination of a high proportion of micro-pores, high water absorption values and slow drying kinetics were shown to be most vulnerable to NaCl-induced decay. CaCl2 and MgCl2 are shown to have similar crystallisation behaviour, forming thin crystalline sheets under low relative humidity and/or high temperature conditions. Distinct differences in their behaviour that are influenced by test specific criteria were identified. The location of MgCl2 crystallisation close to the stone surface, as influenced by prolonged drying under moderate temperature drying conditions, was identified as the main factor that caused substantial dry weight loss in specific stone types. CaCl2 solutions remained unaffected under these conditions and only crystallised under high temperatures. Homogeneous crystallisation of CaCl2 throughout the stone produced greater internal change, with little dry weight loss recorded. NaCl formed distinctive isometric hopper crystals that caused damage through the non-equilibrium growth of salts in trapped regions of the stone. Damage was sustained as granular decay and contour scaling across most stone types. The pore network and hydric properties of the stones continually evolve in response to salt crystallisation, creating a dynamic system whereby the initial, known properties of clean quarried stone will not continually govern the processes of salt crystallisation, nor indeed can they continually predict the behaviour of stone to salt-induced decay.

PRODUÇÃO DE MUDAS DE UMBUZEIRO ( Spondias tuberosa Arruda Câmara) EM DIFERENTES SUBSTRATOS E TAMANHO DE RECIPIENTES

A espécie Spondias tuberosa Arr. Cam. (umbuzeiro) destaca-se como uma das espécies arbóreas de maior potencial do semiárido brasileiro. Apesar de sua relevante importância socioeconômica e ambiental, há falta de estudos voltados para o estabelecimento de um modelo de produção de mudas da espécie. O objetivo desse trabalho foi avaliar a produção de mudas de Spondias tuberosa utilizando diferentes substratos e tamanho de recipientes. O experimento foi conduzido no viveiro do Laboratório de Ecologia Vegetal (LEV) do Centro de Ciências Agrárias (CCA) da Universidade Federal da Paraíba (UFPB), Areia - PB. O delineamento experimental usado foi em blocos casualizados em esquema fatorial 2 x 7 e parcelas subdivididas, sendo que os recipientes representaram as parcelas e os substratos as subparcelas. Foram utilizados substratos formulados a partir da mistura de terra de subsolo (37,5-100%), areia lavada (12,5- 25%) e esterco bovino curtido (10-50%). Os recipientes utilizados foram sacos de polietileno preto com volumes de 1900 cm3 (15 x 27 cm) e 5000 cm3 (25 x 26 cm). Para a obtenção das plântulas, sementes de Spondias tuberosa foram semeadas em sementeira de alvenaria até a repicagem (90 dias após o semeio). Aos 78 dias, após a repicagem, as mudas foram avaliadas quanto à altura, diâmetro do colo, relação altura/ diâmetro do colo, diâmetro do xilopódio, comprimento de raiz, massa seca da parte aérea e raiz. Os dados obtidos foram submetidos à análise de variância e ao teste F, sendo as médias comparadas pelo teste de Tukey ao nível de 5% de probabilidade, utilizando o software SISVAR®. Os substratos com esterco bovino curtido proporcionaram os maiores valores em altura e comprimento de raiz. Para a produção de mudas de Spondias tuberosa, é recomendado o substrato contendo terra de subsolo (45%) + Areia (15%) + Esterco bovino (40%).

Avaliação de Ciclo de Vida Energético (ACVE) de sistemas de vedação de habitações

Tese (doutorado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2015.

Reforço sísmico de estruturas em adobe

A construção em alvenaria de adobe tem um vasto património a nível mundial. É possível encontrar construção em terra no nosso território, sendo que a técnica particular do adobe foi amplamente utilizada na região de Aveiro durante o século XIX até meados do século XX. Devido à tradição e valor patrimonial da construção em alvenaria de adobe, diversos trabalhos têm vindo a ser desenvolvidos no departamento de Engenharia Civil da Universidade de Aveiro, perspetivando um aprofundar de conhecimentos acerca deste tipo de construção. A vulnerabilidade sísmica das construções em alvenaria de adobe fez com que surgissem vários estudos para caracterização sísmica das mesmas, sendo que, recentemente, foi levada a cabo a realização de um ensaio cíclico, simulando os efeitos de um sismo, num modelo de adobe à escala real, construído no laboratório do departamento de Engenharia Civil da Universidade de Aveiro. A presente dissertação tem como objetivo estudar formas de reparação e reforço sísmico de estruturas em adobe. Para isso foi reparado e reforçado o modelo previamente ensaiado, e novamente submetido a um ensaio cíclico, de modo a fazer-se uma análise comparativa com o ensaio prévio e assim retirar conclusões sobre a eficácia da solução de reforço aplicada.

Desenvolvimento de cerâmica vermelha utilizando rejeitos da construção civil

The Industry of the Civil Construction has been one of the sectors that most contribute to the pollution of the environment, due to the great amount of residues generated by the construction, demolition and the extraction of raw material. As a way of minimizing the environmental impacts generated by this industry, some governmental organizations have elaborated laws and measures about the disposal of residues from the building construction (CONAMA - resolution 307). This work has as objective the reutilization of residues compound of sand, concrete, cement, red bricks and blocks of cement and mortar for the production of red ceramic, with the objective of minimizing costs and environmental impacts. The investigated samples contained 0% to 50% of residues in weight, and they were sintered at temperatures of 950°C, 1000°C, 1050°C, 1100°C and 1150°C. After the sinterization, the samples were submitted to tests of absorption of water, linear retraction, resistance to bending, apparent porosity, specific density, XRD and SEM. Satisfactory results were obtained in all studied compositions, with the possible incorporation of up to 50% of residues in ceramic mass without great losses in the mechanical strength, giving better results to the incorporation of 30% of residues in the fabrication of ceramic parts, such as roofing tiles, bricks masonry and pierced bricks