Indicadores do nível relativo do mar e evolução costeira durante o holoceno tardio no litoral oeste do Ceará, NE do Brasil

In the coastal region of Ceará, between the municipalities of Acaraú and Itapipoca, thirteen sites were identified containing indicators of relative sea level, six of these being dated by optically stimulated luminescence (OSL) and radiocarbon. Ages obtained supports that were formed prograding beaches in the study area. In the eastern portion, beaches in coastal plain deposits occur while a system lagoon/barrier paleomangrove occurs in the western portion of the study area. In both cases the coastal deposits prograde from east to west. Higher sea levels were identified between the current: (a) 3.110-2.830 cal. yr. BP; (b) 1.830 yr. BP (OSL) - 1.490 cal. yr. BP; (c) between 1.240-1.060 cal. yr. BP; (d) 845-715 yr. BP (OSL). Since then the sea level suffered by lowering the current level. Variations in sea level are interpreted as responses to changes in the pattern of marine circulation and do not exclude possible tectonic disturbances in the basin of the continental margin. The indicators of relative sea level west coast of Ceará present differently from other curves constructed in the coastal northeast, suggesting that local factors mentioned above contributed to sea level fluctuations.

Abordagem da ergonomia para avaliação do treinamento simulado das equipes de resposta à emergência em lançamentos de veículos aeroespaciais

This dissertation introduces a study that aims to analyze the simulated training of emergency teams and proposes recommendations for the current training system in order to improve the collective skills and resilience of these teams when facing possible critical situations, triggered by possible accident occurrences during aerospace vehicle launching operations in the Barreira do Inferno Launch Center in Parnamirim / RN. This is a field, exploratory, descriptive, explanatory, and a case study with a qualitative approach. Therefore, we adopted the ergonomics approach, using the situated method of ergonomic work analysis (AET), combining observational and interactive methods. The relevance of this research is characterized by the contributions to minimize the human and material hazzards resulting from possible accidents in these operations, the scientific contribution of the AET for simulated emergency training analysis in the launching operations of aerospace vehicles - which are complex and involve risk of accidents - and consequently, the scientific contribution to the current process of recovering the Brazilian Space Program. The survey results point to problems of various kinds in the current simulated training system which compromise the safety of the operations. These problems are grouped into four categories: technological, organizational, team training and from the activity itself, regarding more specifically communication and cooperation (among the team members and these ones with other sectors involved in the launching operation) and regarding the coordination of actions. We propose: a) a new training model, from the creation and application of scenarios based on postulated abnormalities, which could simulate real critical situations, in order to train and improve the skills of the emergency response teams especially in terms of communication, coordination and cooperation; b) restructuring and reorganizing the current training system, based on the formal establishment of a managing staff, on the clear division of responsibilities, on the standardization of processes, on the production of management indicators, on the continuous monitoring, on the feedback from trainees about the quality of the training and on the continuing and frequent training of emergency teams.

Análise experimental de danos em pistões de motor à gasolina operando com adição de gás hidróxi

The addition of hydrogen gas as an alternative fuel source has been widely used, as well reported in scientific literature. Today, several experiments are underway for the use of hydrogen generators (electrolysers) demand for motor vehicles. In all these products their ads manufacturers claim that this provides a reduction of fuel consumption, reduces the emission levels of toxic gas by the discharge and improves engine life. This research analyzes the physical structure of engine components using electrolysis on demand. To this end, a stationary system was fitted with a power generator of electricity, drum roller and adapted two electrolyzers: a dry cell and wet cell other. In steps observation were consumption analyzes in four work load ranges and observing the piston engine, which has been cut and analyzed by Optical Microscopy (OM), Scanning Electron Microscopy and Dispersive Energy (SEM-EDS), X – Ray Diffraction (XRD) and Confocal Microscopy, the stationary system in each step. The results showed a considerable reduction in fuel consumption and a high corrosion in the original factory piston constituted of aluminum-silicon alloy. As corrosion barrier was made a plasma nitriding in the piston head, which proved resistant to attack by hydrogen, although it has presented evidence also, of having been attacked. It is concluded that the automotive electrolysers can be a good choice in terms of consumption and reducing toxic gas emissions, but the material of the combustion chambers of vehicles must be prepared for this purpose.

Variabilidade acústica e respostas evolutivas a diferentes pressões seletivas no canto de anúncio de anfíbios

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Modificação do eletrodo AWS E7018 com adição de filmes finos externos de PVC e Al, para soldagem de aço C-Mn

This paper suggests modifications in coating of electrodes providing an alternative for execution of welding with low hydrogen electrode AWS E7018 without having to dry it, reducing thus the cost and time of manufacturing of high resistance welds. The welds in this research were developed with basic coated electrodes (hygroscopic) – SMAW process – externally painted with aluminum spray paint for high temperatures or wrapped with thin plastic films (PVC) and aluminum foil films used commonly for food protection. The basic premise is that establishing a barrier between the atmosphere and the electrode coating could reduce the effects of high hygroscopicity presented by coatings of low hydrogen, minimizing this way the main source of supply of hydrogen to the fusion pool during welding. It is also expected that the addition of new materials from the electrode coating to the fusion pool would induce metallurgical changes in the deposited metal and, as a consequence, modifications in its mechanical properties. This research dealt with measuring the dissolved hydrogen in the deposited metal after welding with modified electrodes, evaluating the influence of these changes in the produced microstructures and in the mechanical properties of the resulting weld, and comparing the obtained results with the standard welding procedures and with the recently developed waterproof electrodes. The results obtained in most samples welded with modified electrodes showed increased mechanical resistance and increased tenacity due to the increased percentage of acicular ferrite in metal deposited without significant elevation of hardness, when compared with the traditional welding with AWS E7018 electrode and with ELBRÁS BRH4R waterproof electrode. The diffusing hydrogen measured in the modified electrodes was kept inside the parameters defined by international codes.

Modificação do eletrodo AWS E7018 com adição de filmes finos externos de PVC e Al, para soldagem de aço C-Mn

This paper suggests modifications in coating of electrodes providing an alternative for execution of welding with low hydrogen electrode AWS E7018 without having to dry it, reducing thus the cost and time of manufacturing of high resistance welds. The welds in this research were developed with basic coated electrodes (hygroscopic) – SMAW process – externally painted with aluminum spray paint for high temperatures or wrapped with thin plastic films (PVC) and aluminum foil films used commonly for food protection. The basic premise is that establishing a barrier between the atmosphere and the electrode coating could reduce the effects of high hygroscopicity presented by coatings of low hydrogen, minimizing this way the main source of supply of hydrogen to the fusion pool during welding. It is also expected that the addition of new materials from the electrode coating to the fusion pool would induce metallurgical changes in the deposited metal and, as a consequence, modifications in its mechanical properties. This research dealt with measuring the dissolved hydrogen in the deposited metal after welding with modified electrodes, evaluating the influence of these changes in the produced microstructures and in the mechanical properties of the resulting weld, and comparing the obtained results with the standard welding procedures and with the recently developed waterproof electrodes. The results obtained in most samples welded with modified electrodes showed increased mechanical resistance and increased tenacity due to the increased percentage of acicular ferrite in metal deposited without significant elevation of hardness, when compared with the traditional welding with AWS E7018 electrode and with ELBRÁS BRH4R waterproof electrode. The diffusing hydrogen measured in the modified electrodes was kept inside the parameters defined by international codes.

Biologia reprodutiva de Mimus gilvus (Aves: Mimidae) em área de restinga no nordeste do Brasil

The thrush beach, Mimus gilvus (Aves: Mimidae) is a passerine widely distributed in Central and South America. In Brazil occurs mainly in the areas of the resting and vegetation near the beach. In southeastern Brazil this species has disappeared, mainly due to urbanization. Many attributes of their reproductive biology are unknown, especially in relation to reproductive success. During the years 2010-2011, 2011-2012 and 2014-2015 were made visits to the area of restinga forest in Centro de Lançamento da Barreira do Inferno (CLBI), located between the cities of Natal and Parnamirim-RN (5 ° 54'S 35 ° 10'W ) where they were made systematic searches to trying describe reproductive biology of the characteristics of M. gilvus, estimate their reproductive success using the Mayfield method, and identify the main factors that influence their reproductive success in environment the resting. For this, forty fifth active nests monitored were used. Only during the breeding season of 2011-2012 and 2014-2015 were made systematic visits to the study area. The reproductive period ranged August to March. Clutch size ranged from two, three and six eggs (n = 22). Broods of two eggs were more common, with an average of eggs laid per nest of 2 ± 0,51 (n = 20 nests). The incubation period was approximately 13 ± 1,9 days (n = 11 nests). The period of stay of the nestlings was approximately 11 ± 1,6 days (n = 9 nests). With approximately 11 days old the nestlings were able to leave the nest. The apparent success was 37,8% and the success estimated by Mayfield method was 26,6%. Predation was the main cause of loss of nests in the study area. The daily survival rates (TDS) were obtained from 0,9593 incubation and 0,9313 for nestling period respectively. Survival estimates for each period was 0,5827 for incubation and 0,4571 for nestling period. The cumulative average rainfall for each month influenced negatively the hatching rates of M. gilvus nests. In addition, the number hatch eggs among the most rainy season (rainy season) and the period of lowest rainfall (dry season) were different. The number of lost nests of M. gilvus was lower in scrubs than cactus, which may account for the largest number of nests of this species found in scrubs. Survival rates in nestling period were lower compared with the incubation period. The fact that the survival rates nests of M. gilvus be lower in the nestling period compared to the incubation period may result from increased activity of adults during this phase of the nest, which in turn would increase predation rates. M. gilvus seems to avoid the rainy season during their reproduction, concentrated most of their nests in periods of low rainfall.

A escola do urbano no campo do município de Catalão/GO : ensino de geografia nas especificidades do lugar

This study makes an approach to the Morro Agudo Community (Cisterna) located in Catalão city(GO) rural area where stands the Maria Bárbara Sucena Municipal School. This school center is a result of getting together several small and isolated schools, which worked, scattered in many rural communities in the region. After this centralization in a single school, many students had to move along inconvenient distance to get their classes. Morro Agudo Community (Cisterna) was outstanding at garlic cultivation throughout the 1990`s when eventually this activity came to a decline. The region is constituted by properties of small tract of land. The landowners come from a Portuguese background and there are, in addit ion, migrant workers from the northeast region of Brazil. These northeasterners work for these local landowners, and that brings an additional meaning to the social relations in the region and to the rural schooling. The social and cultural diversity of the region has a feedback at the school arising tensions in many ways. In the teaching and learning process the school deals with this diversity, combined with rules and goals that, in the end, delivers a geography teaching not able to value the local knowledge accumulated in the region by its own inhabitants. New methodological approaches to rural school communities emerged out of the analysis of these unmet expectations. Furthermore, this study takes into consideration some “residues”, that means not all events are fit into programs; there are unintended consequences in an open process. All these are object of deep review in this doctoral dissertation. In this community, an analysis of the public policies implemented by Federal and municipal governments to rural schools communities in Brazil was conducted. The way in which public policies toward rural communities are implemented at the schools was reviewed; the goals they pursue and the role played by textbooks are also object of analysis. This study questions the relevance of this tools, mainly if they meet the real needs of the local people. The social representations of teachers and students are considered carefully based on their everyday lives and experiences.

Obtenção de triacetato de celulose a partir do bagaço de cana-deaçúcar para revestimento de micropartículas de goma gelana e avaliação do seu perfil de liberação in vitro e da mucoadesão ex vivo

Oral route of administration is considered to be the most comfortable, safe and greater adaptation for patients. But, oral route presents some disadvantages such as drugs bioavailability and side effects on the stomach. Some technologies are studied to soften and/or resolve these problems, such as coating with polymeric films, which are able to protect the pharmaceutical form of the acid stomachic environment and to act in the drug release, and mucoadhesive systems, which allow the pharmaceutical form remains a greater time interval in the intestine, increasing the effectiveness of the drug. Cellulose triacetate (CTA) films were produced from cellulose extracted from sugar cane bagasse. The films were prepared with different morphologies (with and without water, acting as non-solvent) and concentrations (3, 6.5 and 10%) of CTA and characterized using scanning electron microscopy (SEM), water vapor permeability (WVP), puncture resistance (PR), enzymatic digestion (DE), and mucoadhesive force evaluation (MF). Microscopy showed the formation of symmetric and asymmetric morphologies. WVP data showed that more concentrated films have higher values for WVP; moreover, asymmetric films had higher values than symmetric films. PR measurements showed that symmetric membranes are more resistant than asymmetric ones. More concentrated films were also more puncture resistant, except for symmetric membranes with CTA concentrations of 6.5 and 10% that did not show significant differences. All of the films presented large mucoadhesive capacities independent of their morphology and CTA concentration. From the results of WVP and RP, a symmetric filme with 6.5% CTA showed better ability and mechanical resistance, therefore, was selected to serve as coating of gellan gum (GG) particles incorporating ketoprofen (KET), which was confirmed by SEM. The selected film presented low values in measurements of the swelling index (SI) and in a dissolution test (DT). TGA analysis showed that the CTA coating does not influence the thermal stability of the particles and there is no incompatibility evidence between CTA, GG and KET. Coated particles released 100% of the ketoprofen in 24 h, while uncoated particles released the same amount in 4 h. The results of this study highlight the potential of CTA in the development of new controlled oral delivery systems.

Single Events in a COTS Soft-Error Free SRAM at Low Bias Voltage Induced by 15-MeV Neutrons

This paper presents an experimental study of the sensitivity to 15-MeV neutrons of Advanced Low Power SRAMs (A-LPSRAM) at low bias voltage little above the threshold value that allows the retention of data. This family of memories is characterized by a 3D structure to minimize the area penalty and to cope with latchups, as well as by the presence of integrated capacitors to hinder the occurrence of single event upsets. In low voltage static tests, classical single event upsets were a minor source of errors, but other unexpected phenomena such as clusters of bitflips and hard errors turned out to be the origin of hundreds of bitflips. Besides, errors were not observed in dynamic tests at nominal voltage. This behavior is clearly different than that of standard bulk CMOS SRAMs, where thousands of errors have been reported.

Statistical Anomalies of Bitflips in SRAMs to Discriminate SBUs from MCUs

Recently, the occurrence of multiple events in static tests has been investigated by checking the statistical distribution of the difference between the addresses of the words containing bitflips. That method has been successfully applied to Field Programmable Gate Arrays (FPGAs) and the original authors indicate that it is also valid for SRAMs. This paper presents a modified methodology that is based on checking the XORed addresses with bitflips, rather than on the difference. Irradiation tests on CMOS 130 & 90 nm SRAMs with 14-MeV neutrons have been performed to validate this methodology. Results in high-altitude environments are also presented and cross-checked with theoretical predictions. In addition, this methodology has also been used to detect modifications in the organization of said memories. Theoretical predictions have been validated with actual data provided by the manufacturer.

Evaluating the SEE sensitivity of a 45nm SOI Multi-core Processor due to 14 MeV Neutrons

The aim of this work is to evaluate the SEE sensitivity of a multi-core processor having implemented ECC and parity in their cache memories. Two different application scenarios are studied. The first one configures the multi-core in Asymmetric Multi-Processing mode running a memory-bound application, whereas the second one uses the Symmetric Multi-Processsing mode running a CPU-bound application. The experiments were validated through radiation ground testing performed with 14 MeV neutrons on the Freescale P2041 multi-core manufactured in 45nm SOI technology. A deep analysis of the observed errors in cache memories was carried-out in order to reveal vulnerabilities in the cache protection mechanisms. Critical zones like tag addresses were affected during the experiments. In addition, the results show that the sensitivity strongly depends on the application and the multi-processsing mode used.

A Methodology to Emulate Single Event Upsets in Flip-Flops using FPGAs through Partial Reconfiguration and Instrumentation

This paper presents a methodology to emulate Single Event Upsets (SEUs) in FPGA flip-flops (FFs). Since the content of a FF is not modifiable through the FPGA configuration memory bits, a dedicated design is required for fault injection in the FFs. The method proposed in this paper is a hybrid approach that combines FPGA partial reconfiguration and extra logic added to the circuit under test, without modifying its operation. This approach has been integrated into a fault-injection platform, named NESSY (Non intrusive ErrorS injection SYstem), developed by our research group. Finally, this paper includes results on a Virtex-5 FPGA demonstrating the validity of the method on the ITC’99 benchmark set and a Feed-Forward Equalization (FFE) filter. In comparison with other approaches in the literature, this methodology reduces the resource consumption introduced to carry out the fault injection in FFs, at the cost of adding very little time overhead (1.6 �μs per fault).

Hardware Implementation of a Fault-Tolerant Hopfield Neural Network on FPGAs

This letter presents an FPGA implementation of a fault-tolerant Hopfield NeuralNetwork (HNN). The robustness of this circuit against Single Event Upsets (SEUs) and Single Event Transients (SETs) has been evaluated. Results show the fault tolerance of the proposed design, compared to a previous non fault- tolerant implementation and a solution based on triple modular redundancy (TMR) of a standard HNN design.

Serviço de videochamada utilizando o padrão o HbbTV: myPhoneOnTV

Nos últimos anos tem-se verificado que a população portuguesa está cada vez mais envelhecida. Este fator agrava-se em ambientes rurais, onde a desertificação populacional é mais frequente, derivado, entre outros, da migração da população mais jovem para os grandes centros urbanos, em busca de melhores condições de vida. Tendo como consequência a exclusão social da população residente nestas zonas. O reduzido foco populacional das zonas rurais não é um fator atrativo para as entidades que realizam investimentos em serviços e infraestruturas tecnológicas, devido ao retorno financeiro obtido não ser, à partida, rentável. Levando a uma exclusão tecnológica de quem reside nestas zonas. Este fator, agrava-se na população sénior dado que raramente são estimulados a interagir com a tecnologia. Com o objetivo de contribuir para a melhoria desta problemática, combatendo simultaneamente os dois tipos de exclusões, tecnológica e social, propõem-se através desta dissertação, um serviço de videochamada, baseado no conceito do padrão Hybrid Broadcast Broadband TV (HbbTV). Um dos fatores considerados, durante o estudo deste serviço, foi a barreira tecnológica existente entre os idosos e a tecnologia. De modo a aproximar ambos, optou-se por aproveitar os conhecimentos que os idosos já possuem na utilização de equipamentos do seu quotidiano. Sendo a televisão, o equipamento selecionado para integrar no serviço de videochamada, permitindo ao idoso contactar facilmente com outras pessoas e serviços. Através da implementação de um protótipo e dos resultados obtidos, conclui-se que o serviço desenvolvido é uma solução válida para combater a problemática apresentada, contribuindo positivamente para a redução da exclusão social e da iliteracia tecnológica