Localization and function of the endocannabinoid system throughout the retinogeniculate pathway of vervet monkeys

Le système endocannabinoïde (eCB) est présent dans le système nerveux central (SNC) de mammifères, incluant la rétine, et est responsable de la régulation de nombreux processus physiologiques. Bien que la présence du récepteur cannabinoïde de type 1 (CB1R) a bien été documenté dans la rétine de rongeurs et primates, il y a encore une controverse quant à la présence du récepteur cannabinoïde de type 2 (CB2R) au niveau du SNC. En utilisant la microscopie confocale, nous sommes les premiers à signaler les patrons d’expression du CB2R dans la rétine de singe. Nos résultats démontrent que le CB2R est exprimé exclusivement dans les cellules de Müller de la rétine du singe. En outre, nous avons comparé les différents patrons d’expression du système eCB dans la rétine de la souris, du toupaye, ainsi que du singe vervet et macaque. Nous rapportons que les distributions de CB1R, FAAH (fatty acid amid hydrolase), MAGL (monoacylglycerol lipase) et DAGLα (diacylglycerol lipase alpha) sont hautement conservées parmi ces espèces alors que CB2R et NAPE-PLD (N-acyl phosphatidylethanolamine phospholipase D) présentent différents profils d'expression. CB2R n'a pas été détecté dans les cellules neuronales de la rétine des primates. L’immunoréactivité de NAPE-PLD est présente dans les couches de la rétine de souris et toupayes, mais a été limitée à la couche des photorécepteurs des singes vervet et macaque. Pour étudier les corrélats neuronaux et le rôle de la signalisation du système eCB dans la rétine, nous avons établi un protocole standard pour l'électrorétinographie (ERG), puis enregistré la réponse ERG de la rétine après le blocage des récepteurs avec des antagonistes spécifiques pour CB1R (AM251) et CB2R (AM630). Comparé au témoin, dans des conditions photopiques, et à certaines intensités faibles du stimulus, le blocage de CB1R diminue l'amplitude de l'onde-b, alors qu’à des intensités plus élevées, le blocage de CB2R augmente l'amplitude des deux-ondes a et b. De plus, le blocage des récepteurs cannabinoïdes provoque une augmentation de la latence des deux ondes a et b. Dans des conditions d’adaptation à l'obscurité, le blocage de CB1R et CB2R réduit l’amplitudes de l'onde a seulement à des intensités plus élevées et réduit l’onde b à intensités plus faibles. Des augmentations significatives de latence ont été observées dans les deux cas. Ces résultats indiquent que les récepteurs CB1 et CB2 chez les primates non humains sont impliqués dans la fonction rétinienne conditions photopiques. En outre, nous avons évalué le profil d'expression du CB1R, de FAAH et de NAPE-PLD au-delà de la rétine dans le corps géniculé latéral des singes et nous rapportons pour la première fois que CB1R et FAAH sont exprimés davantage dans les couches magnocellulaires. La NAPE-PLD a été localisée à travers les couches magno- et parvocellulaires. Aucune de ces composantes n’est exprimée dans les couches koniocellulaires. Ces résultats nous aident à mieux comprendre les effets des cannabinoïdes sur le système visuel qui pourraient nous mener à trouver éventuellement de nouvelles cibles thérapeutiques.

Early adversity, brain development and emotion processing in monozygotic twins

Il existe actuellement de nombreuses preuves démontrant que des facteurs génétiques et environnementaux interagissent pendant des périodes spécifiques du développement pour rendre une personne vulnérable aux troubles psychologiques via diverses adaptations physiologiques. Cette thèse porte sur l'impact de l’adversité prénatale (représentée par le petit poids à la naissance, PPN) et de l’adversité postnatale précoce (symptômes dépressifs maternels et comportements maternels négatifs), sur le développement du cerveau, particulièrement les régions fronto-limbiques impliquées dans le traitement des émotions, pendant l'enfance et l'adolescence. Des jumeaux monozygotes (MZ) sont utilisés, lorsque possible, afin de contrôler pour les effets génétiques. Les chapitres 1 et 2 présentent les résultats de la vérification de l'hypothèse que l’adversité prénatale et postnatale précoce sont associées à une altération du fonctionnement des régions fronto-limbique tels que l’amygdale, l’hippocampe, l’insula, le cortex cingulaire antérieur et le cortex préfrontal, en réponse à des stimuli émotifs chez des enfants et des adolescents. On observe que les symptômes dépressifs maternels sont associés à une activation plus élevée des régions fronto-limbiques des enfants en réponse à la tristesse. Les résultats de l’étude avec des adolescents suggèrent que le PPN, les symptômes dépressifs et les comportements maternels négatifs sont associés à une fonction altérée des régions fronto-limbiques en réponse à des stimuli émotionnels. Chez les jumeaux MZ on observe également que la discordance intra-paire de PPN et de certains comportements maternels est associée à une discordance intra-paire du fonctionnement du cerveau et que ces altérations diffèrent selon le sexe. Le chapitre 3 présente les résultats de la vérification de l'hypothèse que l’adversité prénatale et postnatale précoce sont associées à un volume total réduit du cerveau et de l’hypothèse que les comportements maternels peuvent servir de médiateur ou de modérateur de l'association entre le PPN et le volume du cerveau. Avec des jumeaux MZ à l’adolescence on observe a) que le PPN est effectivement associé à une diminution du volume total du cerveau et b) que la discordance intra-paire de PPN est associée à une discordance du volume du cerveau. En somme, cette thèse présente un ensemble de résultats qui soutiennent deux hypothèses importantes pour comprendre les effets de l’environnement sur le développement du cerveau : que l’environnement prénatal et postnatal précoce ont un impact sur le développement du cerveau indépendamment du code génétique et que les mécanismes impliqués peuvent différer entre les garçons et les filles. Finalement, l’ensemble de ces résultats sont discutés à la lumière des autres travaux de recherche dans ce domaine et des avenues à explorer pour de la recherche ultérieure sont proposées.

Aristotle on Thumos and Phantasia

What is Aristotle’s conception of thumos? This question can be broken down into two separate but related questions: (a) what is the object of desire for thumos, and (b) in which faculty of the soul is thumos grounded? The latter question is the focus of this paper. In this paper, “grounded in” is to be taken physiologically; the second question can be rephrased as “Which faculty of the soul is thumos a function of?” As a general rule Aristotle employs both a colloquial and a technical sense of thumos throughout the corpus. When I ask “What is thumos?,” I am interested in the technical sense that appears primarily in On the Soul and in the Nicomachean Ethics, where thumos is defined as a category of desire (a subset of orexis). The main argument of this paper is that Aristotle’s thumos is grounded in the faculty of phantasia – specifically, a sub-faculty called definite phantasia.

Analysis of Some Single and Two Commodity Inventory Problems

This thesis is devoted to the study of some stochastic models in inventories. An inventory system is a facility at which items of materials are stocked. In order to promote smooth and efficient running of business, and to provide adequate service to the customers, an inventory materials is essential for any enterprise. When uncertainty is present, inventories are used as a protection against risk of stock out. It is advantageous to procure the item before it is needed at a lower marginal cost. Again, by bulk purchasing, the advantage of price discounts can be availed. All these contribute to the formation of inventory. Maintaining inventories is a major expenditure for any organization. For each inventory, the fundamental question is how much new stock should be ordered and when should the orders are replaced. In the present study, considered several models for single and two commodity stochastic inventory problems. The thesis discusses two models. In the first model, examined the case in which the time elapsed between two consecutive demand points are independent and identically distributed with common distribution function F(.) with mean  (assumed finite) and in which demand magnitude depends only on the time elapsed since the previous demand epoch. The time between disasters has an exponential distribution with parameter . In Model II, the inter arrival time of disasters have general distribution (F.) with mean  ( ) and the quantity destructed depends on the time elapsed between disasters. Demands form compound poison processes with inter arrival times of demands having mean 1/. It deals with linearly correlated bulk demand two Commodity inventory problem, where each arrival demands a random number of items of each commodity C1 and C2, the maximum quantity demanded being a (< S1) and b(articular case of linearly correlated demand is also discussed

Photothermal Investigations on Certain Plasma Polymerized Thin Films and Near IR Overtone Studies of Some Organic Molecules

Photothermal effect refers to heating of a sample due to the absorption of electromagnetic radiation. Photothermal (PT) heat generation which is an example of energy conversion has in general three kinds of applications. 1. PT material probing 2. PT material processing and 3. PT material destruction. The temperatures involved increases from 1-. 3. Of the above three, PT material probing is the most important in making significant contribution to the field of science and technology. Photothermal material characterization relies on high sensitivity detection techniques to monitor the effects caused by PT material heating of a sample. Photothermal method is a powerful high sensitivity non-contact tool used for non-destructive thermal characterization of materials. The high sensitivity of the photothermal methods has led to its application for analysis of low absorbance samples. Laser calorimetry, photothermal radiometry, pyroelectric technique, photoacoustic technique, photothermal beam deflection technique, etc. come under the broad class ofphotothermal techniques. However the choice of a suitable technique depends upon the nature of the sample, purpose of measurement, nature of light source used, etc. The present investigations are done on polymer thin films employing photothermal beam deflection technique, for the successful determination of their thermal diffusivity. Here the sample is excited by a He-Ne laser (A = 6328...\ ) which acts as the pump beam. Due to the refractive index gradient established in the sample surface and in the adjacent coupling medium, another optical beam called probe beam (diode laser, A= 6500A ) when passed through this region experiences a deflection and is detected using a position sensitive detector and its output is fed to a lock-in amplifier from which the amplitude and phase of the deflection can be directly obtained. The amplitude and phase of the signal is suitably analysed for determining the thermal diffusivity.The production of polymer thin film samples has gained considerable attention for the past few years. Plasma polymerization is an inexpensive tool for fabricating organic thin films. It refers to formation of polymeric materials under the influence of plasma, which is generated by some kind of electric discharge. Here plasma of the monomer vapour is generated by employing radio frequency (MHz) techniques. Plasma polymerization technique results in homogeneous, highly adhesive, thermally stable, pinhole free, dielectric, highly branched and cross-linked polymer films. The possible linkage in the formation of the polymers is suggested by comparing the FTIR spectra of the monomer and the polymer.Near IR overtone investigations on some organic molecules using local mode model are also done. Higher vibrational overtones often provide spectral simplification and greater resolution of peaks corresponding to nonequivalent X-H bonds where X is typically C, N or O. Vibrational overtone spectroscopy of molecules containing X-H oscillators is now a well established tool for molecular investigations. Conformational and steric differences between bonds and structural inequivalence ofCH bonds (methyl, aryl, acetylenic, etc.) are resolvable in the higher overtone spectra. The local mode model in which the X-H oscillators are considered to be loosely coupled anharmonic oscillators has been widely used for the interpretation of overtone spectra. If we are exciting a single local oscillator from the vibrational ground state to the vibrational state v, then the transition energy of the local mode overtone is given by .:lE a......v = A v + B v2 • A plot of .:lE / v versus v will yield A, the local mode frequency as the intercept and B, the local mode diagonal anharmonicity as the slope. Here A - B gives the mechanical frequency XI of the oscillator and B = X2 is the anharmonicity of the bond. The local mode parameters XI and X2 vary for non-equivalent X-H bonds and are sensitive to the inter and intra molecular environment of the X-H oscillator.

Novel Low Loss A(A1/4 B2/4 C1/4)O3 Dielectrics and Their Applications In Broadband Antennas

This thesis presents the microwave dielectric properties of two novel dielectric resonator materials with the composition Ca(Ca1/4Nb2/4Ti1/4)O3 and Ca(Ca1/4Ta2/4Ti1/4)O3 ceramics and their application in the fabrication of wideband antennas. The microwave dielectric properties of the ceramics were tailored by several techniques such as doping, glass addition and solid solution formations in the complex perovskite A and B-sites with suitable substitutions. Among the wide variety of DRs developed, ceramic resonators with optimum properties were identified to fabricate broadband dielectric resonator loaded microstrip patch antennas. Furthermore, wideband, high permittivity dielectric resonator antennas were fabricated and explored the possibility of tuning their characteristics by modifying the feed line geometries.

Studies on isolation, purification and properties of Endoglucanase from the hepatopancreas of Perna viridis

In the attempt to find out catalytic potency and properties of the endoglucanase of green mussel, it could be highlighted that the enzyme is efficient in degrading carboxymethylcellulose to reducing sugars. The immobilized enzyme will find applications in the food industry, paper and pulp industry, wood preservation, alcohol and pharmaceutical industry.The purification method employed i.e. Sephadex G100 chromatography employing affinity and exclusion principles simplify the purification procedure.Addition of Mg2+ and Co2+ at 10mM concentrations enhances endoglucanase activity of green mussel.The immobilized endoglucanase can be used for deinking mixed office waste paper. The endoglucanase if supplemented with exoglucanase and B-glucosidase under appropriate conditions would help in the recycling of paper.

Glycogen degrading enzymes and their regulation in benthic animals and estuarine fish

Alpha glucan phosphorylase plays a very significant role in glycolysis. The inhibition and activation of this enzyme have significant effect on the rate of glycolysis. The rate of glycolysis is also determined by the interconversion between the active 3 and inactive Q forms of phosphorylase by two specific enzymes called phosphorylase phosphatase and phosphorylase kinase. The allosteric properties and interconversion mechanism reported for well—studied animal muscle phosphorylases do not fall under a general pattern. Studies using purified phosphorylase from marine sources are scanty. Detailed studies using specialised tissues from more marine animals are necessary to find the factors that control the properties and activities of the enzyme. This thesis is an attempt in this direction. The thesis deals with a detailed study of the control of the phosphorylase by both allosterism and interconversion between the g and b forms from four different aquatic animals of different habitat. Phosphorylase frm the four different animal muscles were purified either partially or completely and the kinetic and control properties were studied.

Studies on metal resistant bacteria in cochin estuary and its response towards antibiotics and silver nanoparticles

The Cochin estuary (CE), which is one of the largest wetland ecosystems, extends from Thanneermukkam bund in the south to Azhikode in the north. It functions as an effluent repository for more than 240 industries, the characteristics of which includes fertilizer, pesticide, radioactive mineral processing, chemical and allied industries, petroleum refining and heavy metal processing industries (Thyagarajan, 2004). Studies in the CE have been mostly on the spatial and temporal variations in the physical, chemical and biological characteristics of the estuary (Balachandran et al., 2006; Madhu et al., 2007; Menon et al., 2000; Qasim 2003;Qasim and Gopinathan 1969) . Although several monitoring programs have been initiated in the CE to understand the level of heavy metal pollution, these were restricted to trace metals distribution (Balachandran et al., 2005) or the influence of anthropogenic inputs on the benthos and phytoplankton (Madhu et al., 2007;Jayaraj, 2006). Recently, few studies were carried out on microbial ecology in the CE(Thottathil et al 2008a and b;Parvathi et al., 2009and 2011; Thomas et al., 2006;Chandran and Hatha, 2003). However, studies on metal - microbe interaction are hitherto not undertaken in this estuary. Hence, a study was undertaken at 3 sites with different level of heavy metal concentration tounderstand the abundance, diversity and mechanisms of resistance in metal resistant bacteria and its impact on the nutrient regeneration. The present work has also focused on the response of heavy metal resistant bacteria towards antibacterial agent’s antibiotics and silver nanoparticles

Tailoring Magnetic Properties of Co-Fe Thin Films by Topographical Modifications Using Thermal Annealing and Swift Heavy Ion Irradiation and Fabrication of Magnetoelectric Multilayers for Device Applications

Magnetism and magnetic materials have been playing a lead role in improving the quality of life. They are increasingly being used in a wide variety of applications ranging from compasses to modern technological devices. Metallic glasses occupy an important position among magnetic materials. They assume importance both from a scientific and an application point of view since they represent an amorphous form of condensed matter with significant deviation from thermodynamic equilibrium. Metallic glasses having good soft magnetic properties are widely used in tape recorder heads, cores of high-power transformers and metallic shields. Superconducting metallic glasses are being used to produce high magnetic fields and magnetic levitation effect. Upon heat treatment, they undergo structural relaxation leading to subtle rearrangements of constituent atoms. This leads to densification of amorphous phase and subsequent nanocrystallisation. The short-range structural relaxation phenomenon gives rise to significant variations in physical, mechanical and magnetic properties. Magnetic amorphous alloys of Co-Fe exhibit excellent soft magnetic properties which make them promising candidates for applications as transformer cores, sensors, and actuators. With the advent of microminiaturization and nanotechnology, thin film forms of these alloys are sought after for soft under layers for perpendicular recording media. The thin film forms of these alloys can also be used for fabrication of magnetic micro electro mechanical systems (magnetic MEMS). In bulk, they are drawn in the form of ribbons, often by melt spinning. The main constituents of these alloys are Co, Fe, Ni, Si, Mo and B. Mo acts as the grain growth inhibitor and Si and B facilitate the amorphous nature in the alloy structure. The ferromagnetic phases such as Co-Fe and Fe-Ni in the alloy composition determine the soft magnetic properties. The grain correlation length, a measure of the grain size, often determines the soft magnetic properties of these alloys. Amorphous alloys could be restructured in to their nanocrystalline counterparts by different techniques. The structure of nanocrystalline material consists of nanosized ferromagnetic crystallites embedded in an amorphous matrix. When the amorphous phase is ferromagnetic, they facilitate exchange coupling between nanocrystallites. This exchange coupling results in the vanishing of magnetocrystalline anisotropy which improves the soft magnetic properties. From a fundamental perspective, exchange correlation length and grain size are the deciding factors that determine the magnetic properties of these nanocrystalline materials. In thin films, surfaces and interfaces predominantly decides the bulk property and hence tailoring the surface roughness and morphology of the film could result in modified magnetic properties. Surface modifications can be achieved by thermal annealing at various temperatures. Ion irradiation is an alternative tool to modify the surface/structural properties. The surface evolution of a thin film under swift heavy ion (SHI) irradiation is an outcome of different competing mechanism. It could be sputtering induced by SHI followed by surface roughening process and the material transport induced smoothening process. The impingement of ions with different fluence on the alloy is bound to produce systematic microstructural changes and this could effectively be used for tailoring magnetic parameters namely coercivity, saturation magnetization, magnetic permeability and remanence of these materials. Swift heavy ion irradiation is a novel and an ingenious tool for surface modification which eventually will lead to changes in the bulk as well as surface magnetic property. SHI has been widely used as a method for the creation of latent tracks in thin films. The bombardment of SHI modifies the surfaces or interfaces or creates defects, which induces strain in the film. These changes will have profound influence on the magnetic anisotropy and the magnetisation of the specimen. Thus inducing structural and morphological changes by thermal annealing and swift heavy ion irradiation, which in turn induce changes in the magnetic properties of these alloys, is one of the motivation of this study. Multiferroic and magneto-electrics is a class of functional materials with wide application potential and are of great interest to material scientists and engineers. Magnetoelectric materials combine both magnetic as well as ferroelectric properties in a single specimen. The dielectric properties of such materials can be controlled by the application of an external magnetic field and the magnetic properties by an electric field. Composites with magnetic and piezo/ferroelectric individual phases are found to have strong magnetoelectric (ME) response at room temperature and hence are preferred to single phasic multiferroic materials. Currently research in this class of materials is towards optimization of the ME coupling by tailoring the piezoelectric and magnetostrictive properties of the two individual components of ME composites. The magnetoelectric coupling constant (MECC) (_ ME) is the parameter that decides the extent of interdependence of magnetic and electric response of the composite structure. Extensive investigates have been carried out in bulk composites possessing on giant ME coupling. These materials are fabricated by either gluing the individual components to each other or mixing the magnetic material to a piezoelectric matrix. The most extensively investigated material combinations are Lead Zirconate Titanate (PZT) or Lead Magnesium Niobate-Lead Titanate (PMNPT) as the piezoelectric, and Terfenol-D as the magnetostrictive phase and the coupling is measured in different configurations like transverse, longitudinal and inplane longitudinal. Fabrication of a lead free multiferroic composite with a strong ME response is the need of the hour from a device application point of view. The multilayer structure is expected to be far superior to bulk composites in terms of ME coupling since the piezoelectric (PE) layer can easily be poled electrically to enhance the piezoelectricity and hence the ME effect. The giant magnetostriction reported in the Co-Fe thin films makes it an ideal candidate for the ferromagnetic component and BaTiO3 which is a well known ferroelectric material with improved piezoelectric properties as the ferroelectric component. The multilayer structure of BaTiO3- CoFe- BaTiO3 is an ideal system to understand the underlying fundamental physics behind the ME coupling mechanism. Giant magnetoelectric coupling coefficient is anticipated for these multilayer structures of BaTiO3-CoFe-BaTiO3. This makes it an ideal candidate for cantilever applications in magnetic MEMS/NEMS devices. SrTiO3 is an incipient ferroelectric material which is paraelectric up to 0K in its pure unstressed form. Recently few studies showed that ferroelectricity can be induced by application of stress or by chemical / isotopic substitution. The search for room temperature magnetoelectric coupling in SrTiO3-CoFe-SrTiO3 multilayer structures is of fundamental interest. Yet another motivation of the present work is to fabricate multilayer structures consisting of CoFe/ BaTiO3 and CoFe/ SrTiO3 for possible giant ME coupling coefficient (MECC) values. These are lead free and hence promising candidates for MEMS applications. The elucidation of mechanism for the giant MECC also will be the part of the objective of this investigation.

In vitro characterization of two small nucleolytic ribozymes-the hairpin and the hammerhead ribozymes in their natural context

Hairpin Ribozyme kommen natürlich in den Minussträngen der Satelliten RNAs dreier Pflanzenviren (sTRsV, sArMV and sCYMoV) vor. In dieser Arbeit wurden mit dem Programm Mfold darin mehrere distinkte Sekundärstrukturelemente gefunden, die außerhalb des katalytischen Zentrums der Ribozyme lokalisieren. Verschiedene Varianten der drei Ribozyme wurden hergestellt und die Funktion der beobachteten peripheren Strukturelemente biochemisch untersucht. Die sTRsV Hairpin Ribozyme mit unterschiedlichen Längen in Arm C wiesen ähnliche cis-Spaltungsreaktionen auf, unabhängig von der Anzahl interner bulges in Arm C. Das gleiche Verhalten, jedoch bei schnelleren Spaltungsraten, wurde nach Entfernen der three-way junction, die 3’ von der Spaltstelle in Arm A liegt, beobachtet. Hier hat Arm C demnach keinen Einfluss auf die Katalyse, wogegen ein verlängerter Arm A die Reaktion verlangsamt. Unter den experimentellen Bedingungen war die Rückreaktion in Anwesenheit des natürlichen Arms A nicht messbar. Im Gegensatz dazu zeigten alle Varianten ohne die Arm A Erweiterung Ligationsaktivität, die am höchsten in dem Molekül mit dem längsten Arm C war, und gleichermaßen erniedrigt für zwei Varianten mit kürzerem Arm C. Keine der Reaktionen diverser sArMV Hairpin Ribozyme konnte reproduzierbar analysiert werden. Für das sCYMoV Hairpin Ribozym wurde schließlich in cis-Spaltungsreaktionen eine Zunahme der Geschwindigkeit mit Abnahme der Länge von Arm D beobachtet. Dies war der Fall in Anwesenheit der three-way junction in Arm A, nicht jedoch in ihrer Abwesenheit, wo Varianten mit unterschiedlichen Längen des Arms D ähnliche Spaltungsreaktionen aufwiesen. In Anwesenheit der three-way junction in Arm A war eine Reduzierung der Ligationsgeschwindigkeit zu beobachten, und bei ihrer Abwesenheit stieg diese mit der Länge von Arm D. Dies zeigt, dass sowohl die three-way junction in Arm A, als auch die Länge und Anzahl der bulges in Arm D die Reaktion des Hairpin Ribozyms aus sCYMoV beeinflussen, wobei sich Unterschiede in Vorwärts- und Rückreaktion auf die experimentellen Bedingungen zurückführen lassen. In zwei Serien wurde die zentrale five-way junction dieses Ribozyms durch verschiedene four-way junctions ersetzt. Die kinetischen Parameter der Selbstspaltung waren ähnlich für Varianten ohne Arm E auf, jedoch verlangsamt bei Varianten ohne Arm C. Dies zeigt, dass das sCYMoV Hairpin Ribozym auch um eine four-way junction gebildet werden kann, deren konstituierenden Helices jedoch nicht beliebig sind. In einem zweiten Projekt wurde die Konservierung von Hammerhead Ribozym-motiven, die bereits früher im Genom der Brassicacee A. thaliana gefunden worden waren, exemplarisch an zehn Mitgliedern dieser Familie untersucht. Da deren Genome nicht sequenziert sind, wurde PCR mit Primern angewandt, die für die A. thaliana Motive spezifisch waren. Damit konnten Ribozymmotive in allen untersuchten Brassicaceen außer B. nigra and B. oleracea gefunden werden. Diese gehören zu den sechs Brassica Pflanzen, für die der koreanische Botaniker U 1935 im “triangle of U” die genetische Verwandtschaft beschrieb. Darin ist B. carinata, für die Ribozymmotive gezeigt wurden, die Tochterspezies der Brassica Pflanzen ohne diese Motive. Dieser Widerspruch könnte darauf zurückzuführen sein, dass in der PCR unspezifische Primer genutzt wurden, oder aber die Motive aus B. carinata könnten ein Artefakt aus einer Luft-übertragenen Kontamination sein. Technische Schwierigkeiten in der Durchführung von Southern Blots, mit denen zwischen diesen Möglichkeiten unterschieden werden sollte, haben eine abschließende Antwort verhindert. Nach einer Optimierung der Methode sollte diese aber geeignet sein, diese Frage zu klären.

Systematics and evolution of the genus Deuterocohnia Mez (Bromeliaceae)

The present study investigates the systematics and evolution of the Neotropical genus Deuterocohnia Mez (Bromeliaceae). It provides a comprehensive taxonomic revision as well as phylogenetic analyses based on chloroplast and nuclear DNA sequences and presents a hypothesis on the evolution of the genus. A broad morphological, anatomical, biogeographical and ecological overview of the genus is given in the first part of the study. For morphological character assessment more than 700 herbarium specimens from 39 herbaria as well as living plant material in the field and in the living collections of botanical gardens were carefully examined. The arid habitats, in which the species of Deuterocohnia grow, are reflected by the morphological and anatomical characters of the species. Important characters for species delimitation were identified, like the length of the inflorescence, the branching order, the density of flowers on partial inflorescences, the relation of the length of the primary bracts to that of the partial inflorescence, the sizes of floral bracts, sepals and petals, flower colour, the presence or absence of a pedicel, the curvature of the stamina and the petals during anthesis. After scrutinizing the nomenclatural history of the taxa belonging to Deuterocohnia – including the 1992 syonymized genus Abromeitiella – 17 species, 4 subspecies and 4 varieties are accepted in the present revision. Taxonomic changes were made in the following cases: (I) New combinations: A. abstrusa (A. Cast.) N. Schütz is re-established – as defined by Castellanos (1931) – and transfered to D. abstrusa; D. brevifolia (Griseb.) M.A. Spencer & L.B. Sm. includes accessions of the former D. lorentziana (Mez) M.A. Spencer & L.B. Sm., which are not assigned to D. abstrusa; D. bracteosa W. Till is synonymized to D. strobilifera Mez; D. meziana Kuntze ex Mez var. carmineo-viridiflora Rauh is classified as a subspecies of D. meziana (ssp. carmineo-viridiflora (Rauh) N. Schütz); D. pedicellata W. Till is classified as a subspecies of D. meziana (ssp. pedicellata (W. Till) N. Schütz); D. scapigera (Rauh & L. Hrom.) M.A. Spencer & L.B. Sm ssp. sanctae-crucis R. Vásquez & Ibisch is classified as a species (D. sanctae-crucis (R. Vásquez & Ibisch) N. Schütz); (II) New taxa: a new subspecies of D. meziana Kuntze ex Mez is established; a new variety of D. scapigera is established; (the new taxa will be validly published elsewhere); (III) New type: an epitype for D. longipetala was chosen. All other species were kept according to Spencer and Smith (1992) or – in the case of more recently described species – according to the protologue. Beside the nomenclatural notes and the detailed descriptions, information on distribution, habitat and ecology, etymology and taxonomic delimitation is provided for the genus and for each of its species. An key was constructed for the identification of currently accepted species, subspecies and varieties. The key is based on easily detectable morphological characters. The former synonymization of the genus Abromeitiella into Deuterocohnia (Spencer and Smith 1992) is re-evalutated in the present study. Morphological as well as molecular investigations revealed Deuterocohnia incl. Abromeitiella as being monophyletic, with some indications that a monophyletic Abromeitiella lineage arose from within Deuterocohnia. Thus the union of both genera is confirmed. The second part of the present thesis describes and discusses the molecular phylogenies and networks. Molecular analyses of three chloroplast intergenic spacers (rpl32-trnL, rps16-trnK, trnS-ycf3) were conducted with a sample set of 119 taxa. This set included 103 Deuterocohnia accessions from all 17 described species of the genus and 16 outgroup taxa from the remainder of Pitcairnioideae s.str. (Dyckia (8 sp.), Encholirium (2 sp.), Fosterella (4 sp.) and Pitcairnia (2 sp.)). With its high sampling density, the present investigation by far represents the most comprehensive molecular study of Deuterocohnia up till now. All data sets were analyzed separately as well as in combination, and various optimality criteria for phylogenetic tree construction were applied (Maximum Parsimony, Maximum Likelihood, Bayesian inferences and the distance method Neighbour Joining). Congruent topologies were generally obtained with different algorithms and optimality criteria, but individual clades received different degrees of statistical support in some analyses. The rps16-trnK locus was the most informative among the three spacer regions examined. The results of the chloroplast DNA analyses revealed a highly supported paraphyly of Deuterocohnia. Thus, the cpDNA trees divide the genus into two subclades (A and B), of which Deuterocohnia subclade B is sister to the included Dyckia and Encholirium accessions, and both together are sister to Deuterocohnia subclade A. To further examine the relationship between Deuterocohnia and Dyckia/Encholirium at the generic level, two nuclear low copy markers (PRK exon2-5 and PHYC exon1) were analysed with a reduced taxon set. This set included 22 Deuterocohnia accessions (including members of both cpDNA subclades), 2 Dyckia, 2 Encholirium and 2 Fosterella species. Phylogenetic trees were constructed as described above, and for comparison the same reduced taxon set was also analysed at the three cpDNA data loci. In contrast to the cpDNA results, the nuclear DNA data strongly supported the monophyly of Deuterocohnia, which takes a sister position to a clade of Dyckia and Encholirium samples. As morphology as well as nuclear DNA data generated in the present study and in a former AFLP analysis (Horres 2003) all corroborate the monophyly of Deuterocohnia, the apparent paraphyly displayed in cpDNA analyses is interpreted to be the consequence of a chloroplast capture event. This involves the introgression of the chloroplast genome from the common ancestor of the Dyckia/ Encholirium lineage into the ancestor of Deuterocohnia subclade B species. The chloroplast haplotypes are not species-specific in Deuterocohnia. Thus, one haplotype was sometimes shared by several species, where the same species may harbour different haplotypes. The arrangement of haplotypes followed geographical patterns rather than taxonomic boundaries, which may indicate some residual gene flow among populations from different Deuteroccohnia species. Phenotypic species coherence on the background of ongoing gene flow may then be maintained by sets of co-adapted alleles, as was suggested by the porous genome concept (Wu 2001, Palma-Silva et al. 2011). The results of the present study suggest the following scenario for the evolution of Deuterocohnia and its species. Deuterocohnia longipetala may be envisaged as a representative of the ancestral state within the genus. This is supported by (1) the wide distribution of this species; (2) the overlap in distribution area with species of Dyckia; (3) the laxly flowered inflorescences, which are also typical for Dyckia; (4) the yellow petals with a greenish tip, present in most other Deuterocohnia species. The following six extant lineages within Deuterocohnia might have independently been derived from this ancestral state with a few changes each: (I) D. meziana, D. brevispicata and D. seramisiana (Bolivia, lowland to montane areas, mostly reddish-greenish coloured, very laxly to very densely flowered); (II) D. strobilifera (Bolivia, high Andean mountains, yellow flowers, densely flowered); (III) D. glandulosa (Bolivia, montane areas, yellow-greenish flowers, densely flowered); (IV) D. haumanii, D. schreiteri, D. digitata, and D. chrysantha (Argentina, Chile, E Andean mountains and Atacama desert, yellow-greenish flowers, densely flowered); (V) D. recurvipetala (Argentina, foothills of the Andes, recurved yellow flowers, laxly flowered); (VI) D. gableana, D. scapigera, D. sanctae-crucis, D. abstrusa, D. brevifolia, D. lotteae (former Abromeitiella species, Bolivia, Argentina, higher Andean mountains, greenish-yellow flowers, inflorescence usually simple). Originating from the lower montane Andean regions, at least four lineages of the genus (I, II, IV, VI) adapted in part to higher altitudes by developing densely flowered partial inflorescences, shorter flowers and – in at least three lineages (II, IV, VI) – smaller rosettes, whereas species spreading into the lowlands (I, V) developed larger plants, laxly flowered, amply branched inflorescences and in part larger flowers (I).

Poor people and risky business

We try to explain why economic conflicts and illegal business often take place in poor countries. We use the concept of subsistence level of consumption (d) and assume a regular concave utility function for consumption levels higher than d. For consumption levels lower than d utility is constant and equal to zero. Under this framework poor agents are risk-lovers. This result helps to explain why economic conflicts are more likely to appear in poor economies and why poor agents are more willing to undertake illegal business.

Factor saving innovations and factor income shares

We present an endogenous growth model where innovations are factor saving. Technologies can be changed paying a cost and technological change takes place only if the benefits are larger than the costs. Since the gains derived from factor saving innovations depend on factor abundance, biased innovations respond to changes in factors supply. Therefore, as an economy becomes more capital abundant agents try to use capital more intensively. Consequently, (a) the elasticity of output with respect to reproducible factors depends on the capital abundance of the economy and (b) the income share of reproducible factors increases as the economy grows. Another insight of the model is that in some economies the production function converges to an AK in the long run, while in others long-run growth is zero

Economic shocks and crime: evidence from the crash of ponzi schemes

In November 2008, Colombian authorities dismantled a network of Ponzi schemes, making hundreds of thousands of investors lose tens of millions of dollars throughout the country. Using original data on the geographical incidence of the Ponzi schemes, this paper estimates the impact of their break down on crime. We find that the crash of Ponzi schemes differentially exacerbated crime in affected districts. Confirming the intuition of the standard economic model of crime, this effect is only present in places with relatively weak judicial and law enforcement institutions, and with little access to consumption smoothing mechanisms such as microcredit. In addition, we show that, with the exception of economically-motivated felonies such as robbery, violent crime is not affected by the negative shock.