Distribution systems of the food sector in Russia: the perspective of Finnish food industry

Finnish food producers' trade with Russia has experienced profound changes since the collapse of the Soviet Union. Simultaneously, the distribution systems of foodstuffs have changed remarkably. This study sheds some light into these changes and analyses the current situation in distribution systems of foodstuffs in Russia. In addition, the study discusses the possibilities of Finnish food producers to get more of their products to the shelves of Russian food retail stores. Before the 1998 financial crisis, the import of foreign foodstuffs was booming in Russia due to the overvalued rouble. As a result of the financial crisis, food import collapsed. The export of Finnish foodstuffs to Russia has been slowly recovering during the past few years, but in the most important product categories the pre-crisis levels have so far not been reached and maybe will not be reached. In certain product categories the growth has been only marginal. It seems that starting localproduction will become increasingly important in the future. This is further encouraged by the fact that Russian consumers favour domestic food products. Russian consumers are very price conscious and demand quality in food products. The perceived price-quality ratio is an important criterion in the purchase decision.The majority of foodstuff retail is still conducted via unorganised forms of trade (e.g. kiosks and marketplaces) but modern retail chains are developing at a fast pace in Russia. They are also expected to dominate the retail trade in foodstuffs over the unorganised forms of trade in the future. This will change the distribution systems as well. The retail chains are trying to shorten the distribution chain, similarly to what has been seen in the Western countries. This together with the strengthening of retail chains is likely to shrink the role of wholesalers, as the chains increasingly want to work directly with the producers. Many large retail chains are acquiring or have already acquired a distribution centre or centres in order to boost efficiency and control the flow of products. The strengthening of the retail chains also gives them power in negotiations, which the producers and distributors have to adjust to. For example store entry fees and retail chains' own private label products pose challenges to the food producers. In the food production sector the competition is fierce, as large Russianand foreign producers want to ensure their piece of the market. The largest producers utilise their size: they invest in big marketing campaigns and are willing to pay high entry fees to retail chains in order to secure a place on the store shelves and to build a strong brand in Russia. This complicates the situation from the viewpoint of small producers. Currently, the most popular type of distribution system among the interviewed Finnish food producers is based on a network of local distributors. There is, however, a strong consensus on the importanceof starting local production in order to be a serious actor in Russia in the future. Factors that hinder the starting of local production include the lack of local infrastructure and qualified staff, and the low risk tolerance of Finnish firms. Major barriers for entry in Russia are the actions of authorities, fierce competition, fragmented market and Finnish producers' heavy production costs. The suggested strategies for increasing the market share include focusing geographically or segment-wise, introducing new products, starting local production, andcooperation between Finnish producers. Smallness was one reason why Finnish producers had to cut down their operations in Russia due to the 1998 crisis. Smaller producers had fewer resources to tolerate losses during the period of crisis. Smallness is reflected also on trade negotiations with retail chains and distributors. It makes it harder to cope with the store entry fees and to differentiatefrom the mass of products propped up by expensive advertising. Finally, it makes it harder for Finnish producers to start or expand local production, as it is more difficult for a small producer to get financing and to tolerate the increased risks. Compensating for the smallness might become the crucial factor determining the future success of Finnish food producers in the Russian market.

Essays on Innovativeness and its Evaluation in Small and Medium-sized Enterprises

Tutkimus koostuu neljästä artikkelista, jotka käsittelevät suomalaisten pienten ja keskisuurten teollisuusyritysten (PKT-yritysten) innovatiivisuutta, sen attribuutteja (ominaispiirteitä) sekä indikaattoreita. Tutkimuksessa tarkastellaan sekä kirjallisuudessa esitettyjä että PKT-johtajien ja PKT-yritystenkehityshankkeiden rahoituspäätöksiin osallistuvien yritystutkijoiden haastatteluissa esittämiä innovatiivisuuden määritelmiä. Innovatiivisuusindikaattoreista tarkastellaan PKT-yritysten kehittämishankkeille sovellettavia rahoitus- ja arviointikriteerejä sekä yritysten ulkopuolisten rahoittajien että PKT-johtajien näkökulmasta. Erityistä huomiota kohdistetaan sovellettuihin laadullisiin ja ei-numeerisiin innovatiivisuuden arviointikriteereihin. Sekä kirjallisuudessa että kymmenen yritystutkijan ja kuuden esimerkkiyrityksen johtajan haastatteluissa innovaation uutuus yhdistetään innovatiivisuuteen. Muita tärkeitä innovatiivisuuteen liitettyjä ominaisuuksia olivat markkinat, muista yrityksistä erottuminen ja yksilöiden luovuus. Ihmisläheiset ja yksilöihin liittyvät näkökulmat korostuvat yritystutkijoiden ja PKT-johtajien innovatiivisuuden määritelmissä, kun taas kirjallisuudessa annetaan enemmän painoa ympäristölle, tuotteille ja markkinoille. Yritystutkijat pitivät yritykseen ja sen johtajaan liittyviä tekijöitä tärkeinä rahoitettavien kehittämishankkeiden panosten arviointikriteereinä. Tuotteiden kaupallinen menestys oli rahoittajan kannalta tärkein tulostekijä. Tarkastelluissa esimerkkiyrityksissä kehityshankkeista päättäminen ja hankkeiden arviointi on toisaalta intuitiivista ja saattaa olla tiedostamatontakin, koska yritysten kehittämistoiminta on vähäistä. Pienyritysten johtajat korostavat arvioinnissa rahallisiamittareita, vaikka sekä numeerisia että laadullisia kriteereitä sovelletaan. Todennäköisin syy tälle on pienyritysten rajalliset taloudelliset voimavarat. Toinen mahdollinen syy rahoituksellisten tekijöiden painottamiseen on, että tämän päivän ihannejohtaja ymmärretään analyyttiseksi ja mm.rahavirtoja valvovaksi. Kuitenkin innovatiiviset yritysjohtajat pitävät innovaatioiden luomista yhtenä elämän hauskoista puolista. Innovatiiviset esimerkkiyritykset ovat tulevaisuuteen ja kasvuun suuntautuneita strategisella tasolla. Operationaalisella tasolla ne tuottavat keksintöjä ja innovaatioita. Patentteja tarkastelluilla yrityksillä on kuitenkin vähän. Sekä innovatiiviset että vähemmän innovatiiviset esimerkkiyritykset ovat voimakkaasti asiakassuuntautuneita ja erikoistuneita tiettyihin tuotteisiin ja asiakkaisiin. Asiakkaiden tarpeita tyydytetään kehittämällä niitä vastaavia tuotteita. Tästä johtuu, että valtaosa yritysten kehittämistoiminnasta kohdistuu tuotteisiin tai tuotantoon.

Permanent magnet synchronous motor for industrial inverter applications - analysis and design

During the latest few years the need for new motor types has grown, since both high efficiency and an accurate dynamic performance are demanded in industrial applications. For this reason, new effective control systems such as direct torque control (DTC) have been developed. Permanent magnet synchronous motors (PMSM) are well suitable for new adjustable speed AC inverter drives, because their efficiency and power factor are not depending on the pole pair number and speed to the same extent as it is the case in induction motors. Therefore, an induction motor (IM) with a mechanical gearbox can often be replaced with a direct PM motor drive. Space as well as costs will be saved, because the efficiency increases and the cost of maintenance decreases as well. This thesis deals with design criterion, analytical calculation and analysis of the permanent magnet synchronous motor for both sinusoidal air-gap flux density and rectangular air-gapflux density. It is examined how the air-gap flux, flux densities, inductances and torque can be estimated analytically for salient pole and non-salient pole motors. It has been sought by means of analytical calculations for the ultimate construction for machines rotating at relative low 300 rpm to 600 rpm speeds, which are suitable speeds e.g. in Pulp&Paper industry. The calculations are verified by using Finite Element calculations and by measuring of prototype motor. The prototype motor is a 45 kW, 600 rpm PMSM with buried V-magnets, which is a very appropriate construction for high torque motors with a high performance. With the purposebuilt prototype machine it is possible not only to verify the analytical calculations but also to show whether the 600 rpm PMSM can replace the 1500 rpm IM with a gear. It can also be tested if the outer dimensions of the PMSM may be the same as for the IM and if the PMSM in this case can produce a 2.5 fold torque, in consequence of which it may be possible to achieve the same power. The thesis also considers the question how to design a permanent magnet synchronous motor for relatively low speed applications that require a high motor torqueand efficiency as well as bearable costs of permanent magnet materials. It is shown how a selection of different parameters affects the motor properties. Key words: Permanent magnet synchronous motor, PMSM, surface magnets, buried magnets

Dynamic Model of a Small Once-Through Boiler

In this study, a model for the unsteady dynamic behaviour of a once-through counter flow boiler that uses an organic working fluid is presented. The boiler is a compact waste-heat boiler without a furnace and it has a preheater, a vaporiser and a superheater. The relative lengths of the boiler parts vary with the operating conditions since they are all parts of a single tube. The present research is a part of a study on the unsteady dynamics of an organic Rankine cycle power plant and it will be a part of a dynamic process model. The boiler model is presented using a selected example case that uses toluene as the process fluid and flue gas from natural gas combustion as the heat source. The dynamic behaviour of the boiler means transition from the steady initial state towards another steady state that corresponds to the changed process conditions. The solution method chosen was to find such a pressure of the process fluid that the mass of the process fluid in the boiler equals the mass calculated using the mass flows into and out of the boiler during a time step, using the finite difference method. A special method of fast calculation of the thermal properties has been used, because most of the calculation time is spent in calculating the fluid properties. The boiler was divided into elements. The values of the thermodynamic properties and mass flows were calculated in the nodes that connect the elements. Dynamic behaviour was limited to the process fluid and tube wall, and the heat source was regarded as to be steady. The elements that connect the preheater to thevaporiser and the vaporiser to the superheater were treated in a special way that takes into account a flexible change from one part to the other. The model consists of the calculation of the steady state initial distribution of the variables in the nodes, and the calculation of these nodal values in a dynamic state. The initial state of the boiler was received from a steady process model that isnot a part of the boiler model. The known boundary values that may vary during the dynamic calculation were the inlet temperature and mass flow rates of both the heat source and the process fluid. A brief examination of the oscillation around a steady state, the so-called Ledinegg instability, was done. This examination showed that the pressure drop in the boiler is a third degree polynomial of the mass flow rate, and the stability criterion is a second degree polynomial of the enthalpy change in the preheater. The numerical examination showed that oscillations did not exist in the example case. The dynamic boiler model was analysed for linear and step changes of the entering fluid temperatures and flow rates.The problem for verifying the correctness of the achieved results was that there was no possibility o compare them with measurements. This is why the only way was to determine whether the obtained results were intuitively reasonable and the results changed logically when the boundary conditions were changed. The numerical stability was checked in a test run in which there was no change in input values. The differences compared with the initial values were so small that the effects of numerical oscillations were negligible. The heat source side tests showed that the model gives results that are logical in the directions of the changes, and the order of magnitude of the timescale of changes is also as expected. The results of the tests on the process fluid side showed that the model gives reasonable results both on the temperature changes that cause small alterations in the process state and on mass flow rate changes causing very great alterations. The test runs showed that the dynamic model has no problems in calculating cases in which temperature of the entering heat source suddenly goes below that of the tube wall or the process fluid.

La Divisió eclesiàstica en arxiprestats a Catalunya (1800-2005)

Arran del Concordat del 1851 els bisbats espanyols s’organitzen territorialment en arxiprestats. El mapa català d’arxiprestats presenta una complexa evolució històrica. Actualment s’observa una clara tendència envers la reducció del seu nombre (92). L’organització territorial arxiprestal reflecteix l’estructura del territori, la xarxa urbana i la percepció social de la realitat comarcal. Per això, la divisió eclesiàstica és un interessant element de comparació amb l’organització política i administrativa. El mapa de 7 vegueries (noves províncies) amb què treballa el Govern de la Generalitat de Catalunya té una estreta relació amb la divisió tradicional en bisbats. Igualment, totes les noves comarques previstes per la Generalitat tenen una clara correspondència amb algun arxiprestat. Inversament, la designació de Sant Feliu de Llobregat com a seu d’un nou bisbat (2004) no hauria estat possible si aquesta població no hagués estat designada com a cap de partit judicial el 1834.

Grain yield, carbon isotope discrimination and mineral content in mature kernels of barley under irrigated and rainfed conditions

The relationship between yield, carbon isotope discrimination and ash content in mature kernels was examined for a set of 13 barley (Hordeum vulgare) cultivars. Plants were grown under rainfed and well-irrigated conditions in a Mediterranean area. Water deficit caused a decrease in both grain yield and carbon isotope discrimination (Δ). The yield was positively related to Δ and negatively related to ash content, across genotypes within each treatment. However, whereas the correlation between yield and Δ was higher for the set of genotypes under well-irrigated (r=0.70, P<0.01) than under rainfed (r=0.42) conditions, the opposite occurred when yield and ash content were related, ie r=-0.38 under well-irrigated and r=-0.73, (P<0.01) under rainfed conditions. Carbon isotope discrimination and ash content together account for almost 60% of the variation in yield, in both conditions. There was no significant relationship (r=-0.15) between carbon isotope discrimination and ash content in well-irrigated plants, whereas in rainfed plants, this relationship, although significant (r=-0.54, P< 0.05), was weakly negative. The concentration of several mineral elements was measured in the same kernels. The mineral that correlated best with ash content, yield and A, was K. For yield and Δ, although the relationship with K followed the same pattern as the relationhip with ash content, the correlation coefficients were lower. Thus, mineral accumulation in mature kernels seems to be independent of transpiration efficiency. In fact, filling of grains takes place through the phloem pathway. The ash content in kernels is proposed as a complementary criterion, in addition to kernel Δ, to assess genotype differences in barley grain yield under rainfed conditions.

A pilot study on quantification of training load: The use of HRV in training practice.

Recent laboratory studies have suggested that heart rate variability (HRV) may be an appropriate criterion for training load (TL) quantification. The aim of this study was to validate a novel HRV index that may be used to assess TL in field conditions. Eleven well-trained long-distance male runners performed four exercises of different duration and intensity. TL was evaluated using Foster and Banister methods. In addition, HRV measurements were performed 5 minutes before exercise and 5 and 30 minutes after exercise. We calculated HRV index (TLHRV) based on the ratio between HRV decrease during exercise and HRV increase during recovery. HRV decrease during exercise was strongly correlated with exercise intensity (R = -0.70; p < 0.01) but not with exercise duration or training volume. TLHRV index was correlated with Foster (R = 0.61; p = 0.01) and Banister (R = 0.57; p = 0.01) methods. This study confirms that HRV changes during exercise and recovery phase are affected by both intensity and physiological impact of the exercise. Since the TLHRV formula takes into account the disturbance and the return to homeostatic balance induced by exercise, this new method provides an objective and rational TL index. However, some simplification of the protocol measurement could be envisaged for field use.

Identifying the preferred subset of enzymatic profiles in nonlinear kinetic metabolic models via multiobjective global optimization and pareto filters

Optimization models in metabolic engineering and systems biology focus typically on optimizing a unique criterion, usually the synthesis rate of a metabolite of interest or the rate of growth. Connectivity and non-linear regulatory effects, however, make it necessary to consider multiple objectives in order to identify useful strategies that balance out different metabolic issues. This is a fundamental aspect, as optimization of maximum yield in a given condition may involve unrealistic values in other key processes. Due to the difficulties associated with detailed non-linear models, analysis using stoichiometric descriptions and linear optimization methods have become rather popular in systems biology. However, despite being useful, these approaches fail in capturing the intrinsic nonlinear nature of the underlying metabolic systems and the regulatory signals involved. Targeting more complex biological systems requires the application of global optimization methods to non-linear representations. In this work we address the multi-objective global optimization of metabolic networks that are described by a special class of models based on the power-law formalism: the generalized mass action (GMA) representation. Our goal is to develop global optimization methods capable of efficiently dealing with several biological criteria simultaneously. In order to overcome the numerical difficulties of dealing with multiple criteria in the optimization, we propose a heuristic approach based on the epsilon constraint method that reduces the computational burden of generating a set of Pareto optimal alternatives, each achieving a unique combination of objectives values. To facilitate the post-optimal analysis of these solutions and narrow down their number prior to being tested in the laboratory, we explore the use of Pareto filters that identify the preferred subset of enzymatic profiles. We demonstrate the usefulness of our approach by means of a case study that optimizes the ethanol production in the fermentation of Saccharomyces cerevisiae.

Effect of cattle on Salmonella carriage, diversity and antimicrobial resistance in free-ranging wild boar (Sus scrofa) in northeastern Spain

Salmonella is distributed worldwide and is a pathogen of economic and public health importance. As a multi-host pathogen with a long environmental persistence, it is a suitable model for the study of wildlife-livestock interactions. In this work, we aim to explore the spill-over of Salmonella between free-ranging wild boar and livestock in a protected natural area in NE Spain and the presence of antimicrobial resistance. Salmonella prevalence, serotypes and diversity were compared between wild boars, sympatric cattle and wild boars from cattle-free areas. The effect of age, sex, cattle presence and cattle herd size on Salmonella probability of infection in wild boars was explored by means of Generalized Linear Models and a model selection based on the Akaike’s Information Criterion. Prevalence was higher in wild boars co-habiting with cattle (35.67%, CI 95% 28.19–43.70) than in wild boar from cattle-free areas (17.54%, CI 95% 8.74–29.91). Probability of a wild boar being a Salmonella carrier increased with cattle herd size but decreased with the host age. Serotypes Meleagridis, Anatum and Othmarschen were isolated concurrently from cattle and sympatric wild boars. Apart from serotypes shared with cattle, wild boars appear to have their own serotypes, which are also found in wild boars from cattle-free areas (Enteritidis, Mikawasima, 4:b:- and 35:r:z35). Serotype richness (diversity) was higher in wild boars co-habiting with cattle, but evenness was not altered by the introduction of serotypes from cattle. The finding of a S. Mbandaka strain resistant to sulfamethoxazole, streptomycin and chloramphenicol and a S. Enteritidis strain resistant to ciprofloxacin and nalidixic acid in wild boars is cause for public health concern.

Increased risk of cardiovascular disease (CVD) with age in HIV-positive men : a comparison of the D:A:D CVD risk equation and general population CVD risk equations

OBJECTIVES: The aim of the study was to statistically model the relative increased risk of cardiovascular disease (CVD) per year older in Data collection on Adverse events of anti-HIV Drugs (D:A:D) and to compare this with the relative increased risk of CVD per year older in general population risk equations. METHODS: We analysed three endpoints: myocardial infarction (MI), coronary heart disease (CHD: MI or invasive coronary procedure) and CVD (CHD or stroke). We fitted a number of parametric age effects, adjusting for known risk factors and antiretroviral therapy (ART) use. The best-fitting age effect was determined using the Akaike information criterion. We compared the ageing effect from D:A:D with that from the general population risk equations: the Framingham Heart Study, CUORE and ASSIGN risk scores. RESULTS: A total of 24 323 men were included in analyses. Crude MI, CHD and CVD event rates per 1000 person-years increased from 2.29, 3.11 and 3.65 in those aged 40-45 years to 6.53, 11.91 and 15.89 in those aged 60-65 years, respectively. The best-fitting models included inverse age for MI and age + age(2) for CHD and CVD. In D:A:D there was a slowly accelerating increased risk of CHD and CVD per year older, which appeared to be only modest yet was consistently raised compared with the risk in the general population. The relative risk of MI with age was not different between D:A:D and the general population. CONCLUSIONS: We found only limited evidence of accelerating increased risk of CVD with age in D:A:D compared with the general population. The absolute risk of CVD associated with HIV infection remains uncertain.

Handwriting and pre-frailty in the Lausanne cohort 65+ (Lc65+) study

BACKGROUND: Frailty is detected by weight loss, weakness, slow walking velocity, reduced physical activity or poor endurance/exhaustion. Handwriting has not been examined in the context of frailty, despite its functional importance. OBJECTIVE: Our goal was to examine quantitative handwriting measures in people meeting 0, 1, and 2 or more (2+) frailty criteria. We also examined if handwriting parameters were associated with gait performance, weakness, poor endurance/exhaustion and cognitive impairment. METHODS: From the population-based Lc65+, 72 subjects meeting 2+ frailty criteria with complete handwriting samples were identified. Gender-matched controls meeting 1 criterion or no criteria were identified. Cognitive impairment was defined by a Mini-Mental State Examination score of 25 or less or the lowest 20th percentile of Trail Making Test Part B. Handwriting was recorded using a writing tablet and measures of velocity, pauses, and pressure were extracted. RESULTS: Subjects with 2+ criteria were older, had more health problems and need for assistance but had higher education. No handwriting parameter differed between frailty groups (age and education adjusted). Writing velocity was not significantly slower among participants from the slowest 20th percentile of gait velocity but writing pressure was significantly lower among those from the lowest 20th percentile of grip strength. Poor endurance/exhaustion was not associated with handwriting measures. Low cognitive performance was related to longer pauses. CONCLUSIONS: Handwriting parameters might be associated with specific aspects of the frailty phenotype, but not reliably with global definitions of frailty at its earliest stages among subjects able to perform handwriting tests.

Kalsium-käsittelyn vaikutus materiaalin lastuttavuuteen vannesahauksessa

Diplomityö käsittelee aiemmin Suomessa vähän tutkittua metallin vannesahausta. Työ keskittyy lähinnä tangon sahaukseen vaakatyyppisellä vannesahalla. Työn teoriaosuudessa luodaan silmäys erityyppisiin vannesahoihin ja perehdytään tarkemmin terän teoriaan, mm. terän valmistukseen, terämateriaaleihin, geometriaan, erilaisiin hammasmuotoihin sekä haritukseen. Lisäksi käsitellään lastuamisparametreja ja lastuamisvoimia vannesahauksessa. Tarkasteltavana on myös vannesahauksen kustannusrakenne ja sen muodostuminen. Kokeellisessa osiossa tutkitaan teräksille suoritettavan lastuttavuutta parantavan kalsium-käsittelyn vaikutusta sahattavuuteen. Kalsium-käsittely parantaa sahattavuutta 15-80 % käytettävästä terämateriaalista ja tarkastelutavasta riippuen. Kokeellisessa osiossa suoritetaan myös terävertailu kolmen eri terän välillä. Terävertailulla pyritään löytämään kustannustehokkain, eli pienimmän kustannuksen katkaisua kohti tuottava terä vertailuun valittujen vaihtoehtojen joukosta. Kustannustehokkaimmaksi teräksi osoittautui Amadan Super HLG M42 Bi-metalliterä.

Psychometric properties and dimensional structure of the Spanish version of the Coping Responses Inventory - Adult Form

One of the goals of psychological assessment focuses on the adaptation of its instruments to different populations. The objective of this study is to establish the psychometric properties and dimensional structure of the Spanish version of the Coping Responses Inventory- Adult Form (CRI-Adult, Moos, 1993). The following criteria were analyzed: a) descriptive statistics; b) internal consistency reliability (Cronbach"s alpha, and intercorrelations between scales); c) test-retest reliability (4-week interval); d) dimensionality of CRI-Adult (exploratory factor analysis); e) construct validity (confirmatory factor analysis); f) convergent criterion validity (correlations between CRI-Adult and Coping Strategies Indicator, CSI, Amirkhan, 1990), and g) predictive criterion validity (correlations between CRI-Adult, and SCL-90-R, Derogatis, 1983). The results, obtained with 800 adults from Barcelona and surrounding area (334 men and 466 women, aged between 18 to 76 years) indicate that the Spanish version of CRIAdult has satisfactory psychometric properties that allow using this test with guarantee.

Genotypic classification of patients with Wolfram syndrome: insights into the natural history of the disease and correlation with phenotype

Purpose: Wolfram syndrome is a degenerative, recessive rare disease with an onset in childhood. It is caused by mutations in WFS1 or CISD2 genes. More than 200 different variations in WFS1 have been described in patients with Wolfram syndrome, which complicates the establishment of clear genotype-phenotype correlation. The purpose of this study was to elucidate the role of WFS1 mutations and update the natural history of the disease. Methods: This study analyzed clinical and genetic data of 412 patients with Wolfram syndrome published in the last 15 years. Results: (i) 15% of published patients do not fulfill the current ­inclusion criterion; (ii) genotypic prevalence differences may exist among countries; (iii) diabetes mellitus and optic atrophy might not be the first two clinical features in some patients; (iv) mutations are nonuniformly distributed in WFS1; (v) age at onset of diabetes mellitus, hearing defects, and diabetes insipidus may depend on the patient"s genotypic class; and (vi) disease progression rate might depend on genotypic class. Conclusion: New genotype-phenotype correlations were established, disease progression rate for the general population and for the genotypic classes has been calculated, and new diagnostic criteria have been proposed. The conclusions raised could be important for patient management and counseling as well as for the development of treatments for Wolfram syndrome.

All-sky search algorithms for monochromatic signals in bar gravitational wave detector data

In this paper we design and develop several filtering strategies for the analysis of data generated by a resonant bar gravitational wave (GW) antenna, with the goal of assessing the presence (or absence) therein of long-duration monochromatic GW signals, as well as the eventual amplitude and frequency of the signals, within the sensitivity band of the detector. Such signals are most likely generated in the fast rotation of slightly asymmetric spinning stars. We develop practical procedures, together with a study of their statistical properties, which will provide us with useful information on the performance of each technique. The selection of candidate events will then be established according to threshold-crossing probabilities, based on the Neyman-Pearson criterion. In particular, it will be shown that our approach, based on phase estimation, presents a better signal-to-noise ratio than does pure spectral analysis, the most common approach.