Avaliação de gases efeito estufa na cidade do Rio de Janeiro

O presente trabalho teve como objetivo a validação de uma metodologia de amostragem para GEE Gases do Efeito Estufa, com a utilização de seringas e análise por cromatografia de fase gasosa com múltiplos detectores. O trabalho se dividiu em duas etapas. A primeira etapa consistiu em um teste de estabilidade avaliando o meio de amostragem proposto, a seringa, e comparando-o a dois meios de amostragem convencionais canister e bolsa de teflon -, utilizando uma amostra padrão de GEE. A segunda etapa foi a aplicação desta nova metodologia de amostragem na cidade do Rio de Janeiro, buscando a avaliação da concentração dos GEE em diferentes bairros da cidade e a correlação destas com dados meteorológicos e características da localização dos pontos amostrados. Nestas amostragens realizadas na cidade do Rio de Janeiro obteve-se uma média de 536 ppmv, 2,04 ppmv e 274 ppbv, para o CO2, CH4 e N2O, respectivamente, que foram os GEE analisados. Foi possível neste trabalho verificar o grau de correlação dos GEE estudados com variáveis meteorológicas, bem como com outros poluentes já legislados e participantes de monitoramento contínuo. As conclusões alcançadas foram que a nova metodologia proposta para amostragem de GEE é viável devido ao seu bom desempenho no teste de estabilidade, ao baixo custo do material empregado e à praticidade do mesmo, e que as concentrações dos GEE avaliados na cidade do Rio de Janeiro encontram-se superiores às concentrações indicadas como médias globais para os mesmos. Apontando desta forma, a necessidade de um monitoramento contínuo destes de forma a contribuir para a tomada de ações de mitigação dos GEE

Coupling efficiency of laser beam to multimode fiber

The coupling efficiency of laser beam to multimode fiber is given by geometrical optics, and the relation between the maximum coupling efficiency and the beam propagation factor M-2 is analyzed. An equivalent factor M-F(2) for the multimode fiber is introduced to characterize the fiber coupling capability. The coupling efficiency of laser beam to multimode fiber is calculated in respect of the ratio M-2/M-F(2) by the overlapping integral theory. The optimal coupling efficiency can be roughly estimated by the ratio of M-2 to M-F(2) but with a large error range. The deviation comes from the lacks of information on the detail of phase and intensity profile in the beam factor M-2. (C) 2007 Elsevier B.V. All rights reserved.

Population structure of Pacific yellowfin tuna

ENGLISH: The population structure and production of Pacific yellowfin tuna, Thunnus albacares, were examined by studying most of the basic data available on stock assessment, as well as other data, for the period 1965 to 1972. The data were obtained mainly from the Japanese longline fishery in the Pacific Ocean east of about 1200E and from the purse-seine fishery in the eastern Pacific east of about 140oW. Data from genetic studies of subpopulations were not used due to their preliminary nature. It was concluded that the concept of "semi-independent" subpopulations proposed by Kamimura and Honma (1963) and Royce (1964) defines the population structure of Pacific yellowfin. At least three stocks (i.e. western, central and eastern), relatively independent of each other, are thought to exist, but the actual number and location of subpopulations is still unclear. Possible north-south separations, indicated to some extent by genetic studies and tagging, could be neither substantiated nor rejected on the basis of this study. Finally, unless some major change in the fishing technology occurs, it is doubtful if any significant sustainable increase in yellowfin production from the Pacific is possible. The greatest potential for increase, if any, appears to be based on changing the size structure of yellowfin in the catch from the central Pacific. SPANISH: Se examino la estructura de la población y la producción del atún aleta amarilla del Pacifico Thunnus albacares para estudiar la mayoría de los datos básicos que se tenían sobre el avalúo de la población, como también otra información correspondiente al periodo de 1965·1972. Los datos fueron obtenidos principalmente de las pescas palangreros japonesas del Océano Pacifico al este de los 1200 E y de las pescas con redes de cerco del Pacifico oriental, al este de los 140oW. No se emplearon los datos de estudios genéticos de las subpoblaciones porque eran mas bien preliminares. Se concluyo que el concepto propuesto por Kamimura y Honma (1963) y Royce (1964) de subpoblaciones "semiindependientes" define la estructura de la población del aleta amarilla en el Pacifico. Se cree que existen por 10 menos tres existencias (e.d. la occidental, central y oriental), relativamente independientes la una de la otra, pero no se conoce con certeza cuantas subpoblaciones hay y donde se encuentran. La posible separación norte-sur, indicada, hasta cierto punto, por los análisis genéticos y del marcado, no puede ni confirmarse ni rechazarse basados en este estudio. Finalmente, a no ser que ocurra algún gran cambio en la tecnología pesquera es dudoso que sea posible obtener un aumento constante e importante en la producción del aleta amarilla del Pacifico. El potencial mayor de aumento, si es que existe alguno, parece que se basa en el cambio de la estructura de talla en la captura del aleta amarilla del Pacifico central. (PDF contains 169 pages.)

Fabrication and amplified spontaneous emission spectrum of Er3+-doped tellurite glass fiber with D-shape cladding

Tellurite glass is proposed as a host for broadband erbium-doped fiber amplifiers because of their excellent optical and chemical properties. A single-mode Er3+-doped tellurite glass fiber with D-shape cladding was fabricated in this work. The characterization of amplified spontaneous emission (ASE) from this newly fabricated Er3+-doped tellurite fibers are exhibited. When pumped at 980 nm, a very broad erbium ASE nearly 150 nm around 1.53 mum is observed. The changes in ASE with regard to fiber lengths and pumping power were measured and discussed. The output of 2 mW from Er3+-doped tellurite fiber ASE source was obtained under the pump power of 660 mW. The broad 1.53 mum emission of Er3+ in tellurite glass fiber can be used as host material for potential broadband optical amplifier and tunable fiber lasers. (C) 2004 Elsevier B.V. All rights reserved.

Effects of surface treatment on sapphire substrates

The influence of mechanical polishing, chemo-mechanical polishing (CMP), as well as CMP and subsequent chemical etching on the properties of sapphire substrate surfaces has been studied. The sapphire substrates have been investigated by means of polarizing microscopy, atomic force microscopy (AFM). X-ray diffraction rocking curves (XRCs) and micro-Raman spectroscopy. The results show that CMP with subsequent chemically etching yields the best-quality sapphire substrate surfaces. (C) 2004 Elsevier B.V. All rights reserved.

Effect of air annealing on the spectral properties of Ce : Y3Al5O12 single crystals grown by the temperature gradient technique

Five absorption hands, at 227, 300 340, 370 and 457nm, were observed in the optical absorption spectrum of Ce:Y3Al5O12 (Ce:YAG) crystals grown by the temperature gradient technique (TGT). The absorption bands at 227, 340, and 457 nm were identified Lis belonging to the Ce3+ -ion in the YAG crystal. A near UV optical emission band at 398nm was observed. with an excitation spectrum containing two bands, at 235 and 370nm. No fluorescence was detected under 300 nm excitation. The pair of absorption bands at 235 and 370 nm and the absorption band at 300 nm were attributed to the F- and F+-type color centers, respectively. The color centers model was also applied to explain the spectral changes in the Ce:YAG (TGT) crystal, including the reduction in the Ce 31 -ion absorption intensity, after annealing in an oxidizing atmosphere (air). (C) 2004 Elsevier B.V. All rights reserved.

Comparison of spectroscopic parameters of 15 at% Yb : YAlO3 and 15 at% Yb : Y3Al5O12

Yb: YAlO3 (YAP) (15 at %) and Yb: Y3Al5O12 (YAG)(15 at %) have been grown using the Czochralski method. Their absorption and fluorescence spectra were measured at room temperature and important spectroscopic parameters were calculated. Through the comparison of spectroscopic parameters of Yb:YAP and Yb: YAG, all results indicate that 15 at % Yb:YAP crystal is a potential candidate used for compact, efficient thin chip lasers when the laser output wavelength is 1012 or 103 8 nm. (C) 2004 Elsevier B.V. All rights reserved.

光栅位移测量系统的误差自修正方法研究

文中介绍的误差自修正方法是通过光栅位移测量系统中单片机对光栅传感器的多个零位信号进行计数,并根据测量值和系统设定值得到的误差函数自动进行误差修正。实验结果表明,该方法对光栅位移测量系统的误差既可自动进行有效的修正,又可提高系统的测量精度。

Análisis nutricional y su relación con el estrés psico-físico y el daño muscular en jugadoras profesionales de voleibol a lo largo de una temporada

261 p.

双折射雕塑薄膜的研究进展

倾斜沉积技术制备的雕塑薄膜是一种新型的、具有各向异性结构的薄膜材料。根据基片旋转方式的不同，可得到螺旋状、S形状、C形状、弯曲柱状等不同结构的薄膜，并且出现了晶体中的双折射现象。雕塑薄膜可以实现各向同性薄膜无法实现的光学性质，为光学薄膜的设计与制备开辟了新的途径。本文综述了雕塑薄膜的制备方法，分析了雕塑薄膜的微结构与双折射特性，并阐述了其在光学领域内的应用潜力。