Development and validation of an ecological driver distraction evaluation tool

This paper describes the development and validation of a PC based MUARC Driver Distraction Test designed to measure simulated driving performance while the driver is performing a secondary task. The paper discusses the logic behind the development of the test, including the principles that were used to guide its design, as well as the results of a pilot validation study. The findings from this study were consistent with previous research and theory and were consistent with those obtained with the LCT. The results did, however, highlight a number of refinements that were necessary to improve the utility of the test.

Evaluation of shear stress and slip relationship of composite lap joints

Advanced composite materials offer remarkable potential in the strengthening of Civil Engineering structures. This research is targeted to provide in depth knowledge and understanding of bond characteristics of advanced and corrosion resistant material carbon fibre reinforced polymer (CFRP) that has a unique design tailor-ability and cost effective nature. The objective of this research is to investigate and compare the bonding mechanism between CFRP strengthened single and double strap steel joints. Investigations have been made in regards to failure mode, ultimate load and effective bond length for CFRP strengthened double and single strap joints. A series of tensile tests were conducted with different bond lengths for both type of joints. The bond behaviour of these specimens was further investigated by using nonlinear finite element analysis. Finally a bilinear relationship of shear stress-slip has been proposed by using the Finite element model for single and double strap joints.

Education for sustainability : a case study of pre-service primary teachers' knowledge and efficacy

This study investigated the relationships between knowledge and efficacy for teaching sustainability in a sample of 266 pre-service primary teachers at a large, metropolitan university in Australia. A survey gathered information about the participant’s attitudes and self-efficacy for education for sustainability, along with their perceived and actual knowledge of environmental sustainability issues. The participants typically believed they were confident in their abilities to engage with education for sustainability with self-efficacy increasing with increased levels of perceived knowledge. However no relationship was found between perceived knowledge and actual knowledge which suggests that the participants either do not feel constrained by their lack of knowledge, or are perhaps unaware of their actual knowledge of sustainability issues. This lack of relationship may have implications for the development of pedagogical content knowledge with pre-service teachers potentially developing shallow, tokenistic approaches to Education for Sustainability.

People capabilities for promoting sustainability in facilities management practices

Sustainability needs to be embedded throughout the life-cycle of a construction project. From project conception, planning, design, construction stage, operation and maintenance to demolition, each phase of development should embrace principles of sustainability and the stakeholder involved should be empowered with the necessary skills. Past research explored the importance of ensuring sustainability measures during the occupancy phase based on considerations of Life-Cycle Cost Analysis and a project’s long-term detrimental impact on the environment. Facility managers are in a unique position to promote sustainability over longer periods of project engagement and can apply a high level of influence on the built assets through management and upgrades. There is growing interest among facility managers in incorporating sustainability measures into day-to-day practice. More, however, needs to be done. Previous studies have identified barriers such as the lack of sustainability knowledge and skills, poor access to information, and unwillingness to change among facility management (FM) practitioners and stakeholders. This inhibits proper implementation of sustainable practices in the FM sector. A number of key factors, such as knowledge discrepancy, time constraints, diversity of FM functions and a lack of incentives, require urgent remedy. The capability of FM professionals and stakeholders will be a key enabler in managing the sustainability agenda, as it is central to the improvement of competency and innovation in an organization. Compared to the attempts at developing sustainability guidelines and performance measurement, research efforts relating to people capabilities and skills are still lagging behind. This paper discusses the progress to date of a research project aimed at formulating a people capabilities framework for sustainable FM practices based on expert opinions and industry feedback. Through literature review, the paper explores the challenges of incorporating sustainability principles into general FM practices before focusing specifically on FM personnel capabilities that may impact on the implementation of a holistic sustainability agenda in real life practice. The results of an industry survey are used to propose an action framework to identify, promote and utilise people capabilities in order to promote sustainability integration in FM practices. The paper provides a useful information source for FM personnel and organizations to bridge the gap between extensive tools on sustainable design and construction assessment at the front end and the need to maintain focus throughout the project life-cycle.

Evaluation in health outcomes research : linking theories, methodologies and practice in health promotion.

Health outcomes research has developed as a means of evaluating the effectiveness of health care interventions and as an approach to informing resource allocation. The use of a health outcomes approach in health promotion has made increasing demands on evaluation methodologies to demonstrate program effectiveness. However, criticism of the contribution of health promotion to outcomes research has made several assumptions about the use of qualitative methodologies and the content of program objectives largely derived from a biomedical approach. In contrast to the measurement of biomedical interventions in clinical health care, health promotion practice involves social phenomena, wide-reaching cultural, psychological, political and ideological problems and issues. The integration of methodologies of health promotion evaluation will inform further conceptualisation of the health outcomes approach with the differentiation of three types of outcomes: health development outcomes; social health outcomes; and biomedical health outcomes. It is concluded that this differentiation moves away from dualist concepts that advocate the replacement of goals and targets with regional and locally based approaches. Rather, the future direction for health promotion evaluation needs to employ a framework that elaborates multiple methodologies and approaches necessary for establishing what relationships exist between morbidity, mortality, health advancement and equity.

International trends in early childhood education for sustainability

Early childhood education for sustainability (ECEfS) is an emerging field within education – a synthesis of early childhood education and education for sustainability. As a distinct field of educational inquiry and practice, it is less than 20 years old in Australia. My personal story is one that emerged from teaching Aboriginal children in an Indigenous community. These experiences made me question the marginalization of Indigenous peoples in Australian society, the colonizing impacts of education, gave me deeper understandings of human-environment interactions, and the effects of poverty and powerlessness on options for Indigenous people in Australia and elsewhere where people and their lands have been exploited. These experiences saw me return to university to undertake a degree in environmental studies to help me better understand the nexus between society, environment and economy. Hence my background in education for sustainability comes as much from the social sciences as from the biological/ecological sciences and shapes my orientation to my work in ECEFS...

A methodological evaluation of business process compliance management frameworks

Existing compliance management frameworks (CMFs) offer a multitude of compliance management capabilities that makes difficult for enterprises to decide on the suitability of a framework. Making a decision on the suitability requires a deep understanding of the functionalities of a framework. Gaining such an understanding is a difficult task which, in turn, requires specialised tools and methodologies for evaluation. Current compliance research lacks such tools and methodologies for evaluating CMFs. This paper reports a methodological evaluation of existing CMFs based on a pre-defined evaluation criteria. Our evaluation highlights what existing CMFs offer, and what they cannot. Also, it underpins various open questions and discusses the challenges in this direction.

REFRAME : a new approach to evaluation in higher education

Evaluation practices in the higher education sector have been criticised for having unclear purpose and principles; ignoring the complexity and changing nature of learning and teaching and the environments in which they occur; relying almost exclusively on student ratings of teachers working in classroom settings; lacking reliability and validity; using data for inappropriate purposes; and focusing on accountability and marketing rather than the improvement of learning and teaching. In response to similar criticism from stakeholders, in 2011 Queensland University of Technology began a project, entitled REFRAME, to review its approach to evaluation, particularly the student survey system it had been using for the past five years. This presentation will outline the scholarly, evidence based methodology used to undertake institution-wide change, meet the needs of stakeholders suitable to the cultural needs of the institution. It is believed that this approach is broadly applicable to other institutions contemplating change with regard to evaluation of learning and teaching.

ClusterEval 1.0 : Cluster quality Evaluation software

This report describes the available functionality and use of the ClusterEval evaluation software. It implements novel and standard measures for the evaluation of cluster quality. This software has been used at the INEX XML Mining track and in the MediaEval Social Event Detection task.

Sustainability reporting in construction contractors : a case study

Construction activities have significant impacts on the environment, economy and society. As a result, sustainability has become an agenda in construction related business. This is evidenced by an increasingly number of construction related companies adopting sustainability reporting practice. Construction contractors are no exception. This study aims to investigate the sustainability reporting practices adopted by top Chinese contractors active in the international arena. The focus is placed on those Chinese contractors ranked top 50 by the Engineering News Record (ENR) top 225 international contractors. The results showed that the sustainability reporting practices of these top Chinese contractors, in terms of both approaches and the depth, varied significantly however there is a clear trend of growing level of disclosure of sustainability related information. Similarly, environmental sustainability seems the predominate focus of sustainability reporting exercises of top international contractors from China. These findings help to assist senior management of construction contractors to form business strategies to facilitate disclosure and other sustainability related practices.

Identification and evaluation of service bundles for governmental one-stop portals

Recent advances in the area of ‘Transformational Government’ position the citizen at the centre of focus. This paradigm shift from a department-centric to a citizen-centric focus requires governments to re-think their approach to service delivery, thereby decreasing costs and increasing citizen satisfaction. The introduction of franchises as a virtual business layer between the departments and their citizens is intended to provide a solution. Franchises are structured to address the needs of citizens independent of internal departmental structures. For delivering services online, governments pursue the development of a One-Stop Portal, which structures information and services through those franchises. Thus, each franchise can be mapped to a specific service bundle, which groups together services that are deemed to be of relevance to a specific citizen need. This study focuses on the development and evaluation of these service bundles. In particular, two research questions guide the line of investigation of this study: Research Question 1): What methods can be used by governments to identify service bundles as part of governmental One-Stop Portals? Research Question 2): How can the quality of service bundles in governmental One-Stop Portals be evaluated? The first research question asks about the identification of suitable service bundle identification methods. A literature review was conducted, to, initially, conceptualise the service bundling task, in general. As a consequence, a 4-layer model of service bundling and a morphological box were created, detailing characteristics that are of relevance when identifying service bundles. Furthermore, a literature review of Decision-Support Systems was conducted to identify approaches of relevance in different bundling scenarios. These initial findings were complemented by targeted studies of multiple leading governments in the e-government domain, as well as with a local expert in the field. Here, the aim was to identify the current status of online service delivery and service bundling in practice. These findings led to the conceptualising of two service bundle identification methods, applicable in the context of Queensland Government: On the one hand, a provider-driven approach, based on service description languages, attributes, and relationships between services was conceptualised. As well, a citizen-driven approach, based on analysing the outcomes from content identification and grouping workshops with citizens, was also conceptualised. Both methods were then applied and evaluated in practice. The conceptualisation of the provider-driven method for service bundling required the initial specification of relevant attributes that could be used to identify similarities between services called relationships; these relationships then formed the basis for the identification of service bundles. This study conceptualised and defined seven relationships, namely ‘Co-location’, ‘Resource’, ‘Co-occurrence’, ‘Event’, ‘Consumer’, ‘Provider’, and ‘Type’. The relationships, and the bundling method itself, were applied and refined as part of six Action Research cycles in collaboration with the Queensland Government. The findings show that attributes and relationships can be used effectively as a means for bundle identification, if distinct decision rules are in place to prescribe how services are to be identified. For the conceptualisation of the citizen-driven method, insights from the case studies led to the decision to involve citizens, through card sorting activities. Based on an initial list of services, relevant for a certain franchise, participating citizens grouped services according to their liking. The card sorting activity, as well as the required analysis and aggregation of the individual card sorting results, was analysed in depth as part of this study. A framework was developed that can be used as a decision-support tool to assist with the decision of what card sorting analysis method should be utilised in a given scenario. The characteristic features associated with card sorting in a government context led to the decision to utilise statistical analysis approaches, such as cluster analysis and factor analysis, to aggregate card sorting results. The second research question asks how the quality of service bundles can be assessed. An extensive literature review was conducted focussing on bundle, portal, and e-service quality. It was found that different studies use different constructs, terminology, and units of analysis, which makes comparing these models a difficult task. As a direct result, a framework was conceptualised, that can be used to position past and future studies in this research domain. Complementing the literature review, interviews conducted as part of the case studies with leaders in e-government, indicated that, typically, satisfaction is evaluated for the overall portal once the portal is online, but quality tests are not conducted during the development phase. Consequently, a research model which appropriately defines perceived service bundle quality would need to be developed from scratch. Based on existing theory, such as Theory of Reasoned Action, Expectation Confirmation Theory, and Theory of Affordances, perceived service bundle quality was defined as an inferential belief. Perceived service bundle quality was positioned within the nomological net of services. Based on the literature analysis on quality, and on the subsequent work of a focus group, the hypothesised antecedents (descriptive beliefs) of the construct and the associated question items were defined and the research model conceptualised. The model was then tested, refined, and finally validated during six Action Research cycles. Results show no significant difference in higher quality or higher satisfaction among users for either the provider-driven method or for the citizen-driven method. The decision on which method to choose, it was found, should be based on contextual factors, such as objectives, resources, and the need for visibility. The constructs of the bundle quality model were examined. While the quality of bundles identified through the citizen-centric approach could be explained through the constructs ‘Navigation’, ‘Ease of Understanding’, and ‘Organisation’, bundles identified through the provider-driven approach could be explained solely through the constructs ‘Navigation’ and ‘Ease of Understanding’. An active labelling style for bundles, as part of the provider-driven Information Architecture, had a larger impact on ‘Quality’ than the topical labelling style used in the citizen-centric Information Architecture. However, ‘Organisation’, reflecting the internal, logical structure of the Information Architecture, was a significant factor impacting on ‘Quality’ only in the citizen-driven Information Architecture. Hence, it was concluded that active labelling can compensate for a lack of logical structure. Further studies are needed to further test this conjecture. Such studies may involve building alternative models and conducting additional empirical research (e.g. use of an active labelling style for the citizen-driven Information Architecture). This thesis contributes to the body of knowledge in several ways. Firstly, it presents an empirically validated model of the factors explaining and predicting a citizen’s perception of service bundle quality. Secondly, it provides two alternative methods that can be used by governments to identify service bundles in structuring the content of a One-Stop Portal. Thirdly, this thesis provides a detailed narrative to suggest how the recent paradigm shift in the public domain, towards a citizen-centric focus, can be pursued by governments; the research methodology followed by this study can serve as an exemplar for governments seeking to achieve a citizen-centric approach to service delivery.

Children as change agents for sustainability : an action research case study in a kindergarten

At a time when global consumption and production levels are 25 percent higher than the Earth’s sustainable carrying capacity, there are worldwide calls to find ways to sustain the Earth for this and future generations. A central premise of this study is that education systems have an obligation to participate in this move towards sustainability and can respond by embedding education for sustainability into curricula. This study took early childhood education as its focus due to the teacherresearcher’s own concerns about the state of the planet, coupled with early childhood education’s established traditions of nature-based and child-centred pedagogy. The study explored the experiences of a class of kindergarten children as they undertook a Project Approach to learning about environmental sustainability. The Project Approach is an adaptation of Chard’s work which is situated within a constructivist theoretical framework (Chard, 2011). The Project Approach involves in-depth investigations around an identified topic of interest. It has three phases: introductory, synthesising and culminating phase. The study also investigated the learning journey of the classroom teacher/researcher who broadened her long-held co-constructivist teaching approaches to include transformative practices in order to facilitate curriculum which embedded education for sustainability. While coconstructivist approaches focus on the co-construction of knowledge, transformative practices are concerned with creating change. An action research case study was conducted. This involved twenty-two children who attended an Australian kindergarten. Data were collected and analysed over a seven week period. The study found that young children can be change agents for sustainability when a Project Approach is broadened to include transformative practices. The study also found that the child participants were able to think critically about environmental and sustainability issues, were able to create change in their local contexts, and took on the role of educators to influence others’ environmental behaviours. Another finding was that the teacher-researcher’s participation in the study caused a transformation of both her teaching philosophy and the culture at the kindergarten. An important outcome of the study was the development of a new curriculum model that integrates and has applicability for curriculum development and teacher practice.

Quantitative evaluation of polymer gel dosimeters by broadband ultrasound attenuation

Ultrasound has been examined previously as an alternative readout method for irradiated polymer gel dosimeters, with authors reporting varying dose response to ultrasound transmission measurements. In this current work we extend previous work to measure the broadband ultrasound attenuation (BUA) response of irradiated PAGAT gel dosimeters, using a novel ultrasound computed tomography system.

Quality Assessment Matrix : A Collaborative Evaluation Using Multiple Lines of Evidence

Welcome to the Quality assessment matrix. This matrix is designed for highly qualified discipline experts to evaluate their course, major or unit in a systematic manner. The primary purpose of the Quality assessment matrix is to provide a tool that a group of academic staff at universities can collaboratively review the assessment within a course, major or unit annually. The annual review will result in you being read for an external curricula review at any point in time. This tool is designed for use in a workshop format with one, two or more academic staff, and will lead to an action plan for implementation.