Marine diatoms in deep sea sediments

Long-term evolution is thought to take opportunities that arise as a consequence of mass extinction (as argued, for example, by Gould, 2002) and the following biotic recovery, but there is absolutely no evidence for this being the case. However, our study shows that eutrophication by oceanic mixing also played a part in the enhancement of several evolutionary events amongst marine organisms, and these results could indicate that the rates of oceanic biodiversification may be slowed if upwelling becomes weakened by future global warming. This paper defines three distinct evolutionary events of resting spores of the marine diatom genus Chaetoceros, to reconstruct past upwelling through the analysis of several DSDP, ODP and land-based successions from the North, South and equatorial Pacific as well as the Atlantic Ocean during the past 40 million years. The Atlantic Chaetoceros Explosion (ACE) event occurred across the E/O boundary in the North Atlantic, and is characterized by resting spore diversification that occurred as a consequence of the onset of upwelling following changes in thermohaline circulation through global cooling in the early Oligocene. Pacific Chaetoceros Explosion events-1 and -2 (PACE-1 and PACE-2) are characterized by relatively higher occurrences of iron input following the Himalayan uplift and aridification at 8.5 Ma and ca. 2.5 Ma in the North Pacific region. These events not only enhanced the diversification and increased abundance of primary producers, including that of Chaetoceros, other diatoms and seaweeds, but also stimulated the evolution of zooplankton and larger predators, such as copepods and marine mammals, which ate these phytoplankton and plants. Current thinking suggests new evolutionary niches open up after a mass extinction, but our study finds that eutrophication can also stimulate evolutionary diversification. Moreover, in the opposite fashion, our results show that as thermohaline circulation abates, global warming progresses and the ocean surface becomes warmer, many marine organisms will be affected by the environmental degradation.

Physical properties and abundance of diatoms of the ANDRILL AND1-1B drill core

In the austral summer of 2006/7 the ANDRILL MIS (ANtarctic geological DRILLing- McMurdo Ice Shelf) project recovered a 1285 m sediment core from beneath the Ross Ice Shelf near Hut Point Peninsula, Ross Island, Antarctica in a flexural moat associated with the volcanic loading of Ross Island. Contained within the upper ~600 m of this core are sediments recording 38 glacial to interglacial cycles of Early Pliocene to Pleistocene time, including 13 discrete diatomite units (DU). The longest of these, DU XI, is ~76 m thick, contains two distinct unconformities marked by layers of volcanic brecciated sands, and has been assigned an Early to Mid-Pliocene age (5-3 Ma). A detailed record (avg. sample spacing of 33 cm) of the siliceous microfossil assemblages have been generated for DU XI and used in conjunction with geochemical and sedimentological data to subdivide DU XI into four discrete subunits of continuous sedimentation. Within each unit, changes in diatom assemblages have been correlated with the d18O record, providing a temporal resolution as high as 600 yr, and allowing for the construction of a detailed age model and calculation of associated sediment accumulation rates within DU XI. Results indicate a productivity-dominated sedimentary record with higher sediment accumulation rates containing a greater proportion of hemipelagic mud occurring during relatively cool periods and reduced accumulation during warmer intervals. This implies that even during periods of substantial warmth, Milankovitch-paced changes in Antarctic ice volume can be linked to ecological changes recorded as shifts in diatom assemblages.

Vegetation, soil and site characteristics of samples taken along the Yamal Transet in 2007-2008

The overarching goal of the Yamal portion of the Greening of the Arctic project is to examine how the terrain and anthropogenic factors of reindeer herding and resource development combined with the climate variations on the Yamal Peninsula affect the spatial and temporal patterns of vegetation change and how these changes are in turn affecting traditional herding of the indigenous people of the region. The purpose of the expeditions was to collect groundobservations in support of remote sensing studies at four locations along a transect that traverses all the major bioclimate subzones of the Yamal Peninsula. This data report is a summary of information collected during the 2007 and 2008 expeditions. It includes all the information from the 2008 data report (Walker et al. 2008) plus new information collected at Kharasavey in Aug 2008. The locations included in this report are Nadym (northern taiga subzone), Laborovaya (southern tundra = subzone E of the Circumpolar Arctic Vegetation Map (CAVM), Vaskiny Dachi (southern typical tundra = subzone D), and Kharasavey (northern typical tundra = subzone C). Another expedition is planned for summer 2009 to the northernmost site at Belyy Ostrov (Arctic tundra = subzone B). Data are reported from 10 study sites - 2 at Nadym, 2 at Laborovaya, and 3 at Vaskiny Dachi and 3 at Kharasavey. The sites are representative of the zonal soils and vegetation, but also include variation related to substrate (clayey vs. sandy soils). Most of the information was collected along 5 transects at each sample site, 5 permanent vegetation study plots, and 1-2 soil pits at each site. The expedition also established soil and permafrost monitoring sites at each location. This data report includes: (1) background for the project, (2) general descriptions and photographs of each locality and sample site, (3) maps of the sites, study plots, and transects at each location, (4) summary of sampling methods used, (5) tabular summaries of the vegetation data (species lists, estimates of cover abundance for each species within vegetation plots, measured percent ground cover of species along transects, site factors for each study plot), (6) summaries of the Normalized Difference Vegetation Index (NDVI) and leaf area index (LAI) along each transect, (7) soil descriptions and photos of the soil pits at each study site, (8) summaries of thaw measurements along each transect, and (9) contact information for each of the participants. One of the primary objectives was to provide the Russian partners with full documentation of the methods so that Russian observers in future years could repeat the observations independently.

Methane, helium isotope and hydrogen data from the Nibelungen hydrothermal area, Mid Atlantic Ridge

Hydrothermal emission of mantle helium appears to be directly related to magma production rate, but other processes can generate methane and hydrogen on mid-ocean ridges. In an on-going effort to characterize these processes in the South Atlantic, the flux and distribution of these gases were investigated in the vicinity of a powerful black smoker recently discovered at 8°17.9' S, 13°30.4' W. The vent lies on the shoulder of an oblique offset in the Mid-Atlantic Ridge and discharges high concentrations of methane and hydrogen. Measurements during expeditions in 2004 and 2006 show that the ratio of CH4 to 3He in the neutrally buoyant plume is quite high, 4 x 10**8. The CTD stations were accompanied by velocity measurements with lowered acoustic Doppler current profilers (LADCP), and from these data we estimate the methane transport to have been 0.5 mol/sec in a WSW-trending plume that seems to develop during the ebb tidal phase. This transport is an order of magnitude greater than the source of CH4 calculated from its concentration in the vent fluid and the rise height of the plume. From this range of methane fluxes, the source of 3He is estimated to be between 0.14 and 1.2 nmol/sec. In either case, the 3He source is significantly lower than expected from the spreading rate of the Mid-Atlantic Ridge. From the inventory of methane in the rift valley adjacent to the vent, it appears that the average specific rate of oxidation is 2.6 to 23/yr, corresponding to a turnover time between 140 and 16 days. Vertical profiles of methane in the surrounding region often exhibited Gaussian-like distributions, and the variances appear to increase with distance from the vent. Using a Gaussian plume model, we obtained a range of vertical eddy diffusivities between 0.009 and 0.08 m2m2/sec. These high values may be due to tidally driven internal waves across the promontory on which the vent is located.

Diatom biostratigraphy, Argon ages and chronology of ODP Hole 183-1138A

A thick Neogene section was recovered in the upper ~300 m of Ocean Drilling Program Hole 1138A, drilled on the Central Kerguelen Plateau in the Indian sector of the Southern Ocean. Sediment lithologies consist primarily of mixed carbonate and biosiliceous clays and oozes, with several thin (1-3 cm) tephra horizons. The tephras are glass rich, well sorted, and dominantly trachytic to rhyolitic in composition. Volcaniclastic material in these horizons is interpreted to have originated from Heard Island, 180 km northwest of Site 1138, and was likely emplaced through both primary ash fall and turbiditic, submarine flows. A Neogene age-depth model for Hole 1138A is constructed primarily from 36 diatom biostratigraphic datums. Nannofossil and planktonic foraminifer biostratigraphy provides supporting age information. Additionally, four high-precision 40Ar-39Ar ages are derived from ash and tephra horizons, and these radiometric ages are in close agreement with the biostratigraphic ages. The integrated age-depth model reveals a reasonably complete lower Miocene to upper Pleistocene section in Hole 1138A, with the exception of a ~1-m.y. hiatus at the Miocene/Pliocene boundary. Another possible hiatus is also identified at the Oligocene/Miocene boundary. High Neogene sedimentation rates and the presence of both calcareous and siliceous microfossils, combined with datable tephra horizons, establish Site 1138 as a suitable target for future drilling legs with paleoceanographic objectives. This report also proposes two new diatom species, Fragilariopsis heardensis and Azpeitia harwoodii, from Pliocene strata of Hole 1138A.

Temperature- and strain-rate-dependent microfabric evolution in monomineralic mylonite: evidence from in situ deformation of norcamphor

Norcamphor (C7H10O) was subjected to plane strain simple shear in a see-through deformation rig at four different strain rate and temperature conditions. Two transient stages in the microfabric evolution to steady state are distinguished. The grain scale mechanisms associated with the microstructural and textural evolution vary with the applied temperature, strain rate and strain. In high-temperature-low-strain-rate experiments, computer integrated polarization microscopy reveals that the texture evolution is closely related to the crystallographic rotation paths and rotation rates of individual grains. High c-axis rotation rates at low to intermediate shear strains are related to the development of a symmetrical c-axis cross girdle by the end of the first transient stage (γ = 1.5 to 2). During the second transient stage (γ = 1.5 to 6), the cross girdle yields to an oblique c-axis single girdle as c-axis rotation rates decrease and the relative activity of grain boundary migration recrystallization increases. Steady state (γ > 8) is characterized by a stable end orientation of the sample texture and the cyclic growth, rotation and consumption of individual grains within the aggregate.

The evolution of high-temperature mylonitic microfabrics: evidence from simple shearing of a quartz analogue (norcamphor)

Plane strain simple shearing of norcamphor (C7H10O) in a see-through deformation rig to a shear strain of γ = 10.5 at a homologous temperature of Th = 0.81 yields a microfabric similar to that of quartz in amphibolite facies mylonite. Synkinematic analysis of the norcamphor microfabric reveals that the development of a steady-state texture is linked to changes in the relative activities of several grain-scale mechanisms. Three stages of textural and microstructural evolution are distinguished: (1) rotation and shearing of the intracrystalline glide planes are accommodated by localized deformation along three sets of anastomozing microshears. A symmetrical c-axis girdle reflects localized pure shear extension along the main microshear set (Sa) oblique to the bulk shear zone boundary (abbreviated as SZB); (2) progressive rotation of the microshears into parallelism with the SZB increases the component of simple shear on the Sa microshears. Grain-boundary migration recrystallization favours the survival of grains with slip systems oriented for easy glide. This is associated with a textural transition towards two stable c-axis point maxima whose skeletal outline is oblique with respect to the Sa microshears and the SZB; and (3) at high shear strains (γ > 8), the microstructure, texture and mechanism assemblage are strain invariant, but strain continues to partition into rotating sets of microshears. Steady state is therefore a dynamic, heterogeneous condition involving the cyclic nucleation, growth and consumption of grains.

Strength and stiffness of repaired tendons

Rotator cuff tears of the shoulder are a common cause of pain and disability. Although surgery is frequently beneficial, re-tearing of the tendons is likely to re-occur. In many cases even if the reparation is successful it will still generate discomfort, problems with mobility, as well as a sharp pain. This project is funded in the cooperation with the Hospital Clinico San Carlos de Madrid. The purpose of this work is to analyze the effect of the surgical repair and the application of different therapies, including mesenchymal stem cell therapy on the biomechanical properties (strength and stiffness) of the repaired tendon. An animal model of rotator cuff tendon reparations has been developed on laboratory rats.To obtain the mechanical response of the healthy and repaired tendons, it was necessary to develop an experimental set up to reproduce the in-vivo working conditions of the tendons (37 ºC, immersed in physiological serum), and especially the load transfer. The biomechanical properties (maximum load and stiffness) have been measured in healthy and repaired tendons. A total of 70 rats are used in this particular study. It has been found that the repaired tendon is stronger than the original on. However, the repaired tendons demonstrate less flexibility than the healthy (original) ones prior to the damage

Mejora de la seguridad de las presas de escollera frente a percolación accidental mediante protecciones tipo repié

Esta tesis doctoral es el fruto de un trabajo de investigación cuyo objetivo principal es definir criterios de diseño de protecciones en forma de repié en presas de materiales sueltos cuyo espaldón de aguas abajo esté formado por escollera. La protección propuesta consiste en un relleno de material granular situado sobre el pie de aguas abajo de la presa y formado a su vez por una escollera con características diferenciadas respecto de la escollera que integra el espaldón de la presa. La función de esta protección es evitar que se produzcan deslizamientos en masa cuando una cantidad de agua anormalmente elevada circula accidentalmente por el espaldón de aguas abajo de la presa por distintos motivos como pueden ser el vertido por coronación de la presa o la pérdida de estanqueidad del elemento impermeable o del cimiento. Según los datos de la International Commission on Large Dams (ICOLD 1995) el 70% de las causas de rotura o avería grave en presas de materiales sueltos en el mundo están dentro de las que se han indicado con anterioridad. Esta circulación accidental de agua a través del espaldón de escollera, típicamente turbulenta, se ha denominado en esta tesis percolación (“through flow”, en inglés) para diferenciarla del término filtración, habitualmente utilizada para el flujo laminar a través de un material fino. El fenómeno físico que origina la rotura de presas de materiales sueltos sometidas a percolación accidental es complejo, entrando en juego diversidad de parámetros, muchas veces no deterministas, y con acoplamiento entre procesos, tanto de filtración como de arrastre y deslizamiento. En esta tesis se han realizado diferentes estudios experimentales y numéricos con objeto de analizar el efecto sobre el nivel de protección frente al deslizamiento en masa que producen los principales parámetros geométricos que definen el repié: la anchura de la berma, el talud exterior y su altura máxima desde la base. También se han realizado estudios sobre factores con gran influencia en el fenómeno de la percolación como son la anisotropía del material y el incremento de los caudales unitarios en el pie de presa debidos a la forma de la cerrada. A partir de los resultados obtenidos en las distintas campañas de modelación física y numérica se han obtenido conclusiones respecto a la efectividad de este tipo de protección para evitar parcial o totalmente los daños provocados por percolación accidental en presas de escollera. El resultado final de la tesis es un procedimiento de diseño para este tipo de protecciones. Con objeto de completar los criterios de dimensionamiento, teniendo en cuenta los mecanismos de rotura por erosión interna y arrastre, se han incluido dentro del procedimiento recomendaciones adicionales basadas en investigaciones existentes en la bibliografía técnica. Finalmente, se han sugerido posibles líneas de investigación futuras para ampliar el conocimiento de fenómenos complejos que influyen en el comportamiento de este tipo de protección como son el efecto de escala, la anisotropía de la escollera, las leyes de resistencia que rigen la filtración turbulenta a través de medios granulares, los efectos de cimentaciones poco competentes o la propia caracterización de las propiedades de la escollera de presas. This thesis is the result of a research project that had the main objective of defining criteria to design rockfill toe protections for dams with a highly‐permeable downstream shoulder. The proposed protection consists of a rockfill toe berm situated downstream from the dam with specific characteristics with respect to the rockfill that integrates the shoulder of the main dam. The function of these protections is to prevent mass slides due to an abnormally high water flow circulation through the dam shoulder. This accidental seepage flow may be caused by such reasons as overtopping or the loss of sealing at the impervious element of the dam or its foundation. According to data from the International Commission on Large Dams (ICOLD 1995), 70% of the causes of failure or serious damage in embankment dams in the world are within that described previously. This accidental seepage of water through the rockfill shoulder, typically turbulent, is usually called through‐flow. The physical phenomenon which causes the breakage of the rockfill shoulder during such through‐flow processes is complex, involving diversity of parameters (often not deterministic) and coupling among processes, not only seepage but also internal erosion, drag or mass slide. In this thesis, numerical and experimental research is conducted in order to analyze the effects of the main parameters that define the toe protection, i.e. the toe crest length, its slope and maximum height. Additional studies on significant factors which influence the seepage, such as the anisotropy of the material and the increase of the unit flows at the dam toe due to the valley shape are also performed. In addition, conclusions regarding the effectiveness of this type of protection are obtained based on the results of physical and numerical models. The main result of the thesis is a design procedure for this type of protection to avoid mass sliding. In order to complete the design criteria, additional recommendations about internal and external erosion based on the state of the art are included. Finally, new lines of research are suggested for the future to expand the level of knowledge of the complex phenomena that influence the behavior of this type of protection, such as the effects of scale, rockfill anisotropy, non‐linear seepage laws in turbulent seepage through granular media, effects of erodible foundations, or new procedures to characterize the properties of dam rockfill as a construction material.

Influencia de un programa de ejercicio aeróbico en la calidad de vida de pacientes afectadas por cáncer de mama = Influence of an aerobic exercise program on breast cancer patients’ quality of life

INTRODUCCIÓN Actualmente las supervivientes de cáncer de mama viven durante más tiempo. Sin embargo, los tratamientos utilizados presentan importantes efectos secundarios que afectan y marcan su calidad de vida. Numerosos estudios han mostrado que el ejercicio es una herramienta apta, segura y efectiva reduciendo algunos de estos efectos secundarios y, en suma, mejorando la calidad de vida de estas pacientes, aspecto que presenta al ejercicio físico como una intervención integral para ellas. Por el contrario, se ha observado que las supervivientes de cáncer de mama reducen la cantidad de ejercicio que realizan después de dichos tratamientos. Por ello, el objetivo de este proyecto es examinar los efectos de un programa integral de ejercicio en la calidad de vida y la cantidad de ejercicio físico que realizan las pacientes con cáncer de mama en su tiempo, tras finalizar sus tratamientos. MATERIAL Y MÉTODOS Se diseñó un Ensayo Clínico Aleatorizado. Noventa pacientes diagnosticadas de cáncer de mama en estadios tempranos que habían terminado sus tratamientos de radioterapia y quimioterapia recientemente, fueron reclutadas por la Universidad Politécnica de Madrid, desde enero de 2013 hasta junio de 2014. Las pacientes fueron aleatorizadas tras las mediciones iniciales al grupo control (tratamientos habituales) o grupo intervención, durante tres meses. La intervención consistió en 24 clases de ejercicio combinando práctica aeróbica y de fuerza con el fin de reducir los efectos secundarios de dichos tratamientos. La calidad de vida, la cantidad de ejercicio físico realizado en tiempo de ocio, VO2max, la fuerza, la movilidad articular del hombro, la fatiga, la depresión y la ansiedad fueron medidos al inicio y después de los tres meses en todos los pacientes. RESULTADOS Un total de 89 pacientes con una media de 49.06±8.75 de edad fueron finalmente analizadas. El grupo intervención (n=44) mostraron significativamente mejores resultados en calidad de vida (p=0.0001; d=0.85), cantidad de ejercicio en tiempo de ocio (p=0.0001; d=2.77), en variables de la composición corporal, en variables físicas y en variables psicológicas comparado con el grupo control (n=45). Además, se observó una correlación significativa entre la calidad de vida y el ejercicio realizado en tiempo de ocio en el grupo intervención (r= 0.58; p=0.001), que no fue patente en el grupo control. Se observaron cambios significativos en el grupo de intervención relativos a la composición corporal, con aumento de la masa muscular (p=0.001) y reducción de la masa grasa (p=0.0001). Tanto las variables físicas como psicológicas también mostraron diferencias significativas a favor al grupo de intervención en las comparaciones entre grupos. CONCLUSIONES Según estos resultados, un programa de ejercicio físico específico es una intervención integral que mejora los hábitos y la calidad de vida de las supervivientes de cáncer de mama, lo que reduce determinados efectos secundarios de los tratamientos y aumenta la salud física y psicológica general de estas mujeres. Este tipo de intervenciones pude ser una herramienta barata y efectiva para ofrecer a los pacientes, integrada en los tratamientos habituales. ABSTRACT INTRODUCTION It is well known that breast cancer survivors are living longer. However, breast cancer treatments present serious side effects, which could affect breast cancer survivors’ (BCS) health and quality of life (QoL). Exercise has been presented as a feasible, safe and effective tool in reducing some of these side effects and to improve survivors’ QoL, acting as an integrative treatment for them, although it has been observed that BCS reduce their leisure time exercise (LTE) levels. Therefore, the aim of this study was to examine the effects of an integrative exercise program in QoL and LTE in BCS after the completion of their adjuvant treatment. MATERIAL AND METHODS A randomized controlled trial (RCT) was designed. Ninety patients diagnosed with an early stage of breast cancer and who recently finished chemotherapy and radiotherapy treatments were recruited by the Technical University of Madrid from January 2013 to June 2014. Patients were randomized after baseline assessments to the intervention group (IG) or to the control group (CG) (usual care) for three months. The Intervention consisted in 24 supervised exercise classes, combining aerobic and resistance exercises in order to reduce the most common side effects of the treatments. QoL, LTE, body composition, VO2max, strength, shoulder range of motion, fatigue, depression and self-esteem were measured in all the patients at baseline and after three months. RESULTS A total of 89 patients aged 49.06±8.75 years were finally assessed. IG (n=44) showed significant better results in QoL (p=0.0001; d=0.85), LTE (p=0.0001; d=2.77), in body composition, in the physical variable and in psychological outcomes, compared with the CG (n=45). In addition, a correlation between QoL and LTE (r= 0.58; p=0.001) was found in the IG, while CG did not show this correlation. Significant changes in body composition were observed in the group comparisons, especially in lean mass (p=0.001) and body fat mass (p= 0.0001). Positive changes were also observed in the physical and psychological variables in comparisons between groups. CONCLUSIONS These results suggest that this exercise program may be an integrative intervention, which is able to improve QoL and LTE levels in breast cancer survivors, reducing breast cancer side effects of treatments and improving their physical and psychological general health. Exercise may be an effective and inexpensive strategy to be included in patients integrative care.

Injuries in strength training: review and practical application

Purpose: This systematic review examines what is known about injuries in strength training. Methods: A systematic search was performed in PubMed and SportDiscus. Studies were included if they examined powerlifters, weightlifters, strongman athletes, bodybuilding athletes, individuals who undertook recreational weight training or weight training to complement athletic performance. Exposure variables were incidence, severity and body part injury. Results: After examining 1214 titles and abstracts, 62 articles were identified as potentially relevant. Finally, 11 were included in this systematic review. Conflicting results were reported on the relationships between injury definition and incidence or severity recorded. The lower back followed by the shoulder and knee are the most frequently affected areas in strength sports. Conclusion: Strength training is safe. However, the variety of injury definitions has makes it difficult to compare different studies in this field. New styles of reporting injuries have appeared, and could make increases these ratios. If methodological limitations in measuring incidence rate and severity injuries can be resolved, more work can be conducted to define the real incidence rate, compare it with others sports, and explore cause and effect relationships in randomized controlled trials. Key Words: strength training, injuries, specific strength sports, severity

Diseño de un modelo para la identificación y análisis de tramos de carreteras sin accidentes : una nueva visión de la seguridad vial

El planteamiento tradicional de análisis de la accidentalidad en carretera pasa por la consideración de herramientas paliativas, como son la identificación y gestión de los puntos negros o tramos de concentración de accidentes, o preventivas, como las auditorías e inspecciones de seguridad vial. En esta tesis doctoral se presenta un planteamiento complementario a estas herramientas, desde una perspectiva novedosa: la consideración de los tramos donde no se producen accidentes; son los denominados Tramos Blancos. La tesis persigue demostrar que existen determinados parámetros del diseño de las carreteras y del tráfico que, bajo características generales similares de las vías, tienen influencia en el hecho de que se produzcan o no accidentes, adicionalmente a la exposición al riesgo, como factor principal, y a otros factores. La propia definición de los Tramos Blancos, entendidos como tramos de carreteras de longitud representativa donde no se han producido accidentes con víctimas mortales o heridos graves durante un periodo largo de tiempo, garantiza que esta situación no se produzca como consecuencia de la aleatoriedad de los accidentes, sino que pudiera deberse a una confluencia específica de determinados parámetros de la geometría de la vía y del tráfico total y de vehículos pesados. Para el desarrollo de esta investigación se han considerado la red de autopistas de peaje y las carreteras convencionales de la Red del Estado de España, que supone un total de 17.000 kilómetros, y los datos de accidentes con víctimas mortales y heridos graves en el periodo 2006-2010, ambos incluidos, en estas redes (un total de 10.000 accidentes). La red viaria objeto de análisis supone el 65% de la longitud de la Red de Carreteras del Estado, por la que circula el 33% de su tráfico; en ella se produjeron en el año 2013 el 47% de los accidentes con víctimas y el 60% de las víctimas mortales de la Red de Carreteras del Estado. Durante la investigación se ha desarrollado una base de datos de 250.130 registros y más de 3.5 millones de datos en el caso de las autopistas de peaje de la Red de Carreteras del Estado y de 935.402 registros y más de 14 millones de datos en el caso de la red convencional del Estado analizada. Tanto las autopistas de peaje como las carreteras convencionales han sido clasificadas según sus características de tráfico, de manera que se valoren vías con nivel de exposición al riesgo similar. Para cada tipología de vía, se ha definido como longitud de referencia para que un tramo se considere Tramo Blanco la longitud igual al percentil 95 de las longitudes de tramos sin accidentes con heridos graves o víctimas mortales durante el periodo 2006-2010. En el caso de las autopistas de peaje, en la tipología que ha sido considerada para la definición del modelo, esta longitud de referencia se estableció en 14.5 kilómetros, mientras que en el caso de las carreteras convencionales, se estableció en 7.75 kilómetros. Para cada uno de los tipos de vía considerados se han construido una base de datos en la que se han incluido las variables de existencia o no de Tramo Blanco, así como las variables de tráfico (intensidad media diaria total, intensidad de vehículos pesados y porcentaje de vehículos pesados ), la velocidad media y las variables de geometría (número de carriles, ancho de carril, ancho de arcén derecho e izquierdo, ancho de calzada y plataforma, radio, peralte, pendiente y visibilidad directa e inversa en los casos disponibles); como variables adicionales, se han incluido el número de accidentes con víctimas, los fallecidos y heridos graves, índices de peligrosidad, índices de mortalidad y exposición al riesgo. Los trabajos desarrollados para explicar la presencia de Tramos Blancos en la red de autopistas de peaje han permitido establecer las diferencias entre los valores medios de las variables de tráfico y diseño geométrico en Tramos Blancos respecto a tramos no blancos y comprobar que estas diferencias son significativas. Así mismo, se ha podido calibrar un modelo de regresión logística que explica parcialmente la existencia de Tramos Blancos, para rangos de tráfico inferiores a 10.000 vehículos diarios y para tráficos entre 10.000 y 15.000 vehículos diarios. Para el primer grupo (menos de 10.000 vehículos al día), las variables que han demostrado tener una mayor influencia en la existencia de Tramo Blanco son la velocidad media de circulación, el ancho de carril, el ancho de arcén izquierdo y el porcentaje de vehículos pesados. Para el segundo grupo (entre 10.000 y 15.000 vehículos al día), las variables independientes más influyentes en la existencia de Tramo Blanco han sido la velocidad de circulación, el ancho de calzada y el porcentaje de vehículos pesados. En el caso de las carreteras convencionales, los diferentes análisis realizados no han permitido identificar un modelo que consiga una buena clasificación de los Tramos Blancos. Aun así, se puede afirmar que los valores medios de las variables de intensidad de tráfico, radio, visibilidad, peralte y pendiente presentan diferencias significativas en los Tramos Blancos respecto a los no blancos, que varían en función de la intensidad de tráfico. Los resultados obtenidos deben considerarse como la conclusión de un análisis preliminar, dado que existen otros parámetros, tanto de diseño de la vía como de la circulación, el entorno, el factor humano o el vehículo que podrían tener una influencia en el hecho que se analiza, y no se han considerado por no disponer de esta información. En esta misma línea, el análisis de las circunstancias que rodean al viaje que el usuario de la vía realiza, su tipología y motivación es una fuente de información de interés de la que no se tienen datos y que permitiría mejorar el análisis de accidentalidad en general, y en particular el de esta investigación. Adicionalmente, se reconocen limitaciones en el desarrollo de esta investigación, en las que sería preciso profundizar en el futuro, reconociendo así nuevas líneas de investigación de interés. The traditional approach to road accidents analysis has been based in the use of palliative tools, such as black spot (or road sections) identification and management, or preventive tools, such as road safety audits and inspections. This thesis shows a complementary approach to the existing tools, from a new perspective: the consideration of road sections where no accidents have occurred; these are the so-called White Road Sections. The aim of this thesis is to show that there are certain design parameters and traffic characteristics which, under similar circumstances for roads, have influence in the fact that accidents occur, in addition to the main factor, which is the risk exposure, and others. White Road Sections, defined as road sections of a representative length, where no fatal accidents or accidents involving serious injured have happened during a long period of time, should not be a product of randomness of accidents; on the contrary, they might be the consequence of a confluence of specific parameters of road geometry, traffic volumes and heavy vehicles traffic volumes. For this research, the toll motorway network and single-carriageway network of the Spanish National Road Network have been considered, which is a total of 17.000 kilometers; fatal accidents and those involving serious injured from the period 2006-2010 have been considered (a total number of 10.000 accidents). The road network covered means 65% of the total length of the National Road Network, which allocates 33% of traffic volume; 47% of accidents with victims and 60% of fatalities happened in these road networks during 2013. During the research, a database of 250.130 registers and more than 3.5 million data for toll motorways and 935.042 registers and more than 14 million data for single carriageways of the National Road Network was developed. Both toll motorways and single-carriageways have been classified according to their traffic characteristics, so that the analysis is performed over roads with similar risk exposure. For each road type, a reference length for White Road Section has been defined, as the 95 percentile of all road sections lengths without accidents (with fatalities or serious injured) for 2006-2010. For toll motorways, this reference length concluded to be 14.5 kilometers, while for single-carriageways, it was defined as 7.75 kilometers. A detailed database was developed for each type of road, including the variable “existence of White Road Section”, as well as variables of traffic (average daily traffic volume, heavy vehicles average daily traffic and percentage of heavy vehicles from the total traffic volume), average speed and geometry variables (number of lanes, width of lane, width of shoulders, carriageway width, platform width, radius, superelevation, slope and visibility); additional variables, such as number of accidents with victims, number of fatalities or serious injured, risk and fatality rates and risk exposure, have also been included. Research conducted for the explanation of the presence of White Road Sections in the toll motorway network have shown statistically significant differences in the average values of variables of traffic and geometric design in White Road Sections compared with other road sections. In addition, a binary logistic model for the partial explanation of the presence of White Road Sections was developed, for traffic volumes lower than 10.000 daily vehicles and for those running from 10.000 to 15.000 daily vehicles. For the first group, the most influent variables for the presence of White Road Sections were the average speed, width of lane, width of left shoulder and percentage of heavy vehicles. For the second group, the most influent variables were found to be average speed, carriageway width and percentage of heavy vehicles. For single-carriageways, the different analysis developed did not reach a proper model for the explanation of White Road Sections. However, it can be assumed that the average values of the variables of traffic volume, radius, visibility, superelevation and slope show significant differences in White Road Sections if compared with others, which also vary with traffic volumes. Results obtained should be considered as a conclusion of a preliminary analysis, as there are other parameters, not only design-related, but also regarding traffic, environment, human factor and vehicle which could have an influence in the fact under research, but this information has not been considered in the analysis, as it was not available. In parallel, the analysis of the circumstances around the trip, including its typology and motivation is an interesting source of information, from which data are not available; the availability of this information would be useful for the improvement of accident analysis, in general, and for this research work, in particular. In addition, there are some limitations in the development of the research work; it would be necessary to develop an in-depth analysis in the future, thus assuming new research lines of interest.

Efecto sobre el rendimiento productivo y calidad de la canal de la inclusión de guisantes (Pisum sativum) y alberjón (Vicia narbonensis) en el pienso de lechones y cerdos de cebo

Las leguminosas grano presentan un perfil nutricional de gran interés para alimentación de ganado porcino, debido principalmente a su elevado contenido proteico. Sin embargo, la presencia de factores antinutritivos (FAN), que según el género difieren en calidad y cantidad, condiciona la absorción de la proteína, el nutriente más valorado. El objetivo de esta Tesis Doctoral ha sido el estudio del efecto de los principales FAN de guisante y alberjón sobre el rendimiento productivo, de canal y de piezas nobles, cuando sustituyen a la soja, parcial o totalmente, durante la fase estárter y el periodo de engorde de cerdos grasos. Con este motivo se llevaron a cabo 4 ensayos con machos castrados y la misma línea genética: híbrido Duroc x (Landrace x Large white). En el ensayo 1, se estudió la influencia de distintos niveles de inhibidores de proteasas (IP) en el pienso sobre la productividad de lechones durante la fase estárter (40 a 61 días de edad). Para ello, se utilizaron tres variedades de guisantes de invierno que contenían diferentes cantidades de IP, tanto de tripsina (IT) como de quimotripsina (IQ) [unidades de tripsina inhibida/mg (UTI), unidades de quimotripsina inhibida/mg (UQI): 9,87- 10,16, 5,75-8,62 y 12,55-15,75, para guisantes Cartouche, Iceberg y Luna, respectivamente] más elevadas que en la harina de soja 47 (HnaS) y en la soja extrusionada (SE) (UTI/mg - UQI/mg: 0,61-3,56 y 2,36-4,65, para HnaS y SE, respectivamente). El diseño experimental fue al azar, con cuatro tratamientos dietéticos que diferían en las fuentes proteicas y en la cantidad de IP, enfrentando un pienso control de soja a otros tres piensos con guisantes de invierno de las variedades indicadas, que sustituían parcialmente a la soja. Cada tratamiento se replicó cuatro veces, siendo la celda con 6 lechones la unidad experimental. Los animales que consumieron el pienso con guisante Cartouche tuvieron más ganancia media diaria (GMD) que el resto (P < 0,001) con el mismo consumo medio diario (CMD) e índice de conversión (IC). No hubo diferencias significativas entre los animales del pienso control y los que consumieron piensos con guisantes Iceberg y Luna. En el ensayo 2 la leguminosa objeto de estudio fue el alberjón y su FAN el dipéptido _Glutamyl-S-Ethenyl-Cysteine (GEC). El diseño y el periodo experimental fueron los mismos que en el ensayo 1, con cuatro dietas que variaban en el porcentaje de alberjones: 0%, 5%, 15% y 25%, y de GEC (1,54% del grano). Los lechones que consumieron el pienso con 5% tuvieron un CMD y GMD más elevado (P < 0,001), con el mismo IC que los animales pertenecientes al tratamiento 0%. Los índices productivos empeoraron significativamente y de manera progresiva al aumentar el porcentaje de alberjones (15 y 25%). Se obtuvieron ecuaciones de regresión con estructura polinomial que fueron significativas tanto para el nivel de alberjón como para la cantidad de GEC presente en el pienso. El ensayo 3 se efectuó durante el periodo de engorde, sustituyendo por completo la soja a partir de los 84 días de edad con las tres variedades de guisantes de invierno, observando el efecto sobre el rendimiento productivo, de canal y piezas nobles. El diseño, en bloques completos al azar, tuvo cuatro tratamientos según el guisante presente en el pienso y, por lo tanto, los niveles de IP: Control-soja, Cartouche, Iceberg y Luna, con 12 réplicas de 4 cerdos por tratamiento. De 84 a 108 días de edad los animales que consumieron los piensos Control-soja e Iceberg, tuvieron el mismo CMD y GMD, empeorando en los cerdos alimentados con Luna y Cartouche (P < 0,05). El IC fue igual en los tratamientos Control-soja e Iceberg, ocupando una posición intermedia en Cartouche y peor en los cerdos del pienso Luna (P < 0,001). De 109 a 127 días de edad la GMD y el IC fueron iguales, con un CMD más elevado en Control-soja e Iceberg que en los cerdos que consumieron Cartouche y Luna (P < 0,05). No hubo diferencias significativas durante el acabado (128 a 167 días de edad). Globalmente el CMD y GMD fueron más elevados en los cerdos que comieron los piensos Iceberg y Control-soja, empeorando por igual en los que comieron Cartouche y Luna (P < 0,05); el IC fue el mismo en todos los tratamientos. No se observaron diferencias en los datos relacionados con peso y rendimiento de canal y piezas nobles (jamón, paleta y chuletero), ni del contenido de grasa intramuscular en el lomo y proporción de ácidos grasos principales (C16:0, C18:0, C18:1n-9) en la grasa subcutánea. En el ensayo 4, realizado durante el periodo de engorde (60 a 171 días de edad), se valoró el efecto de dietas con distintos niveles de alberjones, y en consecuencia de su factor antinutritivo el dipéptido GEC, sobre el rendimiento productivo y la calidad de la canal y piezas nobles. El diseño fue en cuatro bloques completos al azar, con cuatro tratamientos según el porcentaje de inclusión de alberjón en el pienso: 0%, 5%, 15% y 25%, con 12 réplicas por tratamiento y cuatro cerdos en cada una de ellas. El tratamiento con 5% mejoró la GMD al final de la fase de cebo (152 días de vida) y, junto con el 0%, presentaron los resultados más favorables de peso e IC al final del ensayo (171 días de vida). Del mismo modo, el peso y rendimiento de canal fueron más elevados en los cerdos alimentados con los tratamientos 0% y 5% (P < 0,001). Piensos con el 15 y 25% de alberjones empeoraron los resultados productivos, así como el rendimiento y peso de canal. Sucedió lo mismo con el peso de las piezas nobles (jamón, paleta y chuletero), significativamente superior en 0% y 5% frente a 15% y 25%, siendo los cerdos que consumieron este último pienso los peores. Por el contrario el rendimiento de jamón y chuletero fue más elevado en los cerdos de los tratamientos 25% y 15% que en los que consumieron los piensos con 5% y 0% (P < 0,001); en el rendimiento de paletas se invirtieron los resultados, siendo mayores en los animales de los tratamientos 0% y 5% (P < 0,001). Se obtuvieron ecuaciones de regresión polinomial, para estimar las cantidades de inclusión de alberjones y de GEC más favorables desde el punto de vista productivo, así como los contrastes ortogonales entre los distintos tratamientos. ABSTRACT The grain legumes have a nutritional profile of great interest to feed pigs, mainly due to high protein content. However, the presence of antinutritional factors (ANF), which differ in quality and quantity according to gender, hinder the absorption of the protein, the most valuable nutrient. The aim of this thesis was to study the effect of the main ANF of pea and narbon vetch (NV) on productive performance, of the carcass and main lean cuts, when replacing soybean, partially or totally, during the starter phase and the fattening period of heavy pigs. For this reason were carried four trials with barrows and the same genetic line: Duroc hybrid x (Landrace x Large white). In trial 1, was studied the influence of different levels of protease inhibitors (PI) in the diet over productivity of piglets during the starter phase (40-61 days of age). For this, were used three varieties of winter peas containing different amounts of PI, both trypsin (TI) and chymotrypsin (CI) [inhibited units/mg trypsin (TIU), inhibited units/mg chymotrypsin (CIU): 9.87 - 10.16, 5.75 - 8.62 and 12.55 - 15.75, for peas Cartouche, Iceberg and Luna, respectively] higher than in soybean meal 47 (SBM) and soybeans extruded (SBE) (TIU/mg - CIU/mg: 0.61 - 3.56 and 2.36 - 4.65 for SBM and SBE, respectively). The design was randomized with four dietary treatments differing in protein sources and the amount of PI, with a control diet of soybean and three with different varieties of winter peas: Cartouche, Iceberg and Luna, which partially replace soybean. Each treatment was replicated four times, being the pen with 6 piglets the experimental unit. Pigs that ate the feed with pea Cartouche had better growth (ADG) than the rest (P < 0.001), with the same average daily feed intake (ADFI) and feed conversion ratio (FCR). There were no significant differences between piglets fed with control diet and those fed Iceberg and Luna diets. In trial 2 the legume under study was the NV and your ANF the dipeptide _Glutamyl FAN-S-Ethenyl-Cysteine (GEC). The experimental period and the design were the same as in trial 1, with four diets with different percentage of NV: 0%, 5%, 15% and 25%, and from GEC (1.52% of the grain). The piglets that consumed the feed containing 5% had higher ADG and ADFI (P < 0.05), with the same FCR that pigs belonging to the 0% treatment. Production rates worsened progressively with increasing percentage of NV (15 and 25%). Were obtained regression equations with polynomial structure that were significant for NV percentage and amount of GEC present in the feed. The test 3 was carried out during the fattening period, completely replace soy from 84 days of age with three varieties of winter peas, observing the effect on the yield, carcass and main lean cuts. The design, randomized complete blocks, had four treatments with different levels of PI: Control-soy, Cartouche, Iceberg and Luna, with 12 replicates of 4 pigs per treatment. From 84 to 108 days of age the pigs fed with Control-soy and Iceberg feed, had the same ADFI and ADG, worsening in pigs fed with Luna and Cartouche (P < 0.05). The FCR was similar in diets Control-soy and Iceberg, occupying an intermediate position in Cartouche and worse in pigs fed with Luna (P < 0.001). From 109-127 days of age the ADG and FCR were equal, with higher ADFI in pigs fed with Control-soy and Iceberg, regarding pigs fed with Cartouche and Luna (P < 0.05). There was no difference in the finishing phase (128-167 days of age). In global period, the ADFI and ADG were higher in pigs that ate Control-soy and Iceberg, and worse in those who ate Cartouche and Luna. The FCR was the same in all treatments. No significant differences were observed in the data related to weight and carcass yield, main lean cuts (ham, shoulder and loin chop) and intramuscular fat loin content and major fatty acids proportion (C16:0, C18:0, C18:1n-9) of subcutaneous fat. In experiment 4, made during the fattening period (60-171 days of age), was assessed the effect of diets with different levels of NV, and consequently of GEC, in the performance and quality of carcass and main lean cuts. There was a completely randomized design with four dietary treatments differing in percentage of NV: 0%, 5%, 15% and 25%, with 12 replicates per treatment and four pigs each. Treatment with 5% improved the ADG at the end of the fattening phase (152 days of age) and, together with 0%, showed the most favorable body weight and FCR at the end of the trial (171 days of age). Similarly, the weight and performance of carcass were higher for pigs fed with diets 0% and 5% (P < 0.05). Diets with 15 and 25% worsened the productive and carcass results. The weight of the main lean cuts (ham, shoulder and loin chop) was significantly higher in 0% and 5% vs 15% and 25%.The diet 25% was the worst of all. By contrast the performance of ham and loin chop was higher in pigs fed with diets 25% and 15%, that those who ate diets with 5% and 0% (P < 0.001); the results of shoulder performance were reversed, being greater in pigs feed with diets 0% and 5% (P < 0.001). Polynomial regression equations were obtained to estimate the percentage of NV and GEC more favorable from the point of view of production, and orthogonal contrasts between treatments.