Iowa Historic Property Study: Iowana Farms Milk Company, 1416 State Street, City of Bettendorf, Scott County, Iowa, 2012

The Iowana Farms Milk Company factory building was considered to retain sufficient integrity and possess sufficient significance to be considered eligible for the National Register of Historic Places under Criteria A and C for its historical and architectural significance in the Bettendorf community. The Iowana Farms Milk Company was an important early to mid-twentieth-century business in Bettendorf, and was among the few that was not owned or operated by the Bettendorf Company. It was a strong and thriving business for many years, and its products were well known in the Quad Cities region. The importance of this property becomes even more significant when one considers that most of the buildings once associated with the actual Bettendorf Company, which was undeniably the most important business and industry in town, are now gone. As a result, the Iowana Farms Milk Company factory building was a physical vestige of the once-thriving commercial industries that made Bettendorf into a city in the twentieth century. This property was further significant for its representation of the evolution of the dairy industry in the twentieth century from farm to factory production. It also reflected the changes to the industry based on scientific discoveries, mechanical innovations, and governmental regulations related to improved sanitation and the pure milk movement. The Iowana Farms Milk Company represented a model plant for the time, and the marketing strategies it employed followed the trends of the industry. The Iowana Farms Milk Company plant had to be removed to make room for a new I-74 bridge over the Mississippi River at Bettendorf. The construction of the new bridge also required removal of the historic Iowa-Illinois Memorial Bridge. The documentation reported herein and for that of the Iowa-Illinois Memorial Bridge fulfills the requirements of the Memorandum of Agreement regarding the removal of these historic properties.

An efficient algorithm to perform multiple testing in epistasis screening

Background: Research in epistasis or gene-gene interaction detection for human complex traits has grown over the last few years. It has been marked by promising methodological developments, improved translation efforts of statistical epistasis to biological epistasis and attempts to integrate different omics information sources into the epistasis screening to enhance power. The quest for gene-gene interactions poses severe multiple-testing problems. In this context, the maxT algorithm is one technique to control the false-positive rate. However, the memory needed by this algorithm rises linearly with the amount of hypothesis tests. Gene-gene interaction studies will require a memory proportional to the squared number of SNPs. A genome-wide epistasis search would therefore require terabytes of memory. Hence, cache problems are likely to occur, increasing the computation time. In this work we present a new version of maxT, requiring an amount of memory independent from the number of genetic effects to be investigated. This algorithm was implemented in C++ in our epistasis screening software MBMDR-3.0.3. We evaluate the new implementation in terms of memory efficiency and speed using simulated data. The software is illustrated on real-life data for Crohn’s disease. Results: In the case of a binary (affected/unaffected) trait, the parallel workflow of MBMDR-3.0.3 analyzes all gene-gene interactions with a dataset of 100,000 SNPs typed on 1000 individuals within 4 days and 9 hours, using 999 permutations of the trait to assess statistical significance, on a cluster composed of 10 blades, containing each four Quad-Core AMD Opteron(tm) Processor 2352 2.1 GHz. In the case of a continuous trait, a similar run takes 9 days. Our program found 14 SNP-SNP interactions with a multiple-testing corrected p-value of less than 0.05 on real-life Crohn’s disease (CD) data. Conclusions: Our software is the first implementation of the MB-MDR methodology able to solve large-scale SNP-SNP interactions problems within a few days, without using much memory, while adequately controlling the type I error rates. A new implementation to reach genome-wide epistasis screening is under construction. In the context of Crohn’s disease, MBMDR-3.0.3 could identify epistasis involving regions that are well known in the field and could be explained from a biological point of view. This demonstrates the power of our software to find relevant phenotype-genotype higher-order associations.

Creació d’un model de simulació pels propulsors del robot submarí Girona 500 mitjançant CFD

S’arriba a un acord entre el grup de recerca GREFEMA i ViCOROB per estudiar els propulsors de palesutilitzats fins a l’actualitat en el robot submarí Girona 500, de forma que el model creatserveixi d’eina per apoder estudiar qualsevol tipus de propulsor que es vulgui fer servir.Es crearà un model de simulació amb CFD d’ANSYS per tal de poder recrear qualsevol situació ambqualsevol model de propulsor que es vulgui emprar, estalviant en costos de compra o fabricació, a mésd’evitar un muntatge experimental que pot no ser del tot fiable.A partir de geometries de propulsors de pales comercials existents es realitzarà una simulació amb elprograma de dinàmica de fluids computacional (CFD) d’ANSYS.La informació proporcionada per l’eina de simulació es compararan amb els resultats obtinguts de formaempírica a les instal•lacions del Parc Científic i Tecnològic de la Universitat de Girona i amb el model teòric.D’aquesta forma, es comprovarà la bondat de la simulació i es validarà el model numèric utilitzat

Anàlisi hidrodinàmic de vehicles submarins mitjançant eines de simulació CFD

El grup VICOROB de la UdG té una àmplia experiència en l’àmbit dels vehicles irobots submarins, amb diferents prototips degudament validats experimentalment.L’interès d’aquest grup de recerca és anar més enllà i conèixer exactament elcomportament del vehicle dins de l’aigua.El grup VICOROB disposa d’un vehicle subaquàtic, l’anomenat GIRONA 500 que haestat dissenyat com una plataformad'investigació amb capacitat per tornara configurar-se per a moltes aplicacionsdiferents, que van des dels clàssicssonar i servei d’imatges de vídeo fins atasques d'intervenció autònomesdifícilsL’objectiu és d’aquest projecte és obtenir a partir de la geometria real del vehicleGIRONA 500 els coeficients hidrodinàmics del submarí complet i de solamentl’estructura per així conèixer l’efecte hidrodinàmic del nombre de propulsors acoblats alrespectiu vehicle aquàtic

Augmented state Kalman filtering for AUV navigation

Addresses the problem of estimating the motion of an autonomous underwater vehicle (AUV), while it constructs a visual map ("mosaic" image) of the ocean floor. The vehicle is equipped with a down-looking camera which is used to compute its motion with respect to the seafloor. As the mosaic increases in size, a systematic bias is introduced in the alignment of the images which form the mosaic. Therefore, this accumulative error produces a drift in the estimation of the position of the vehicle. When the arbitrary trajectory of the AUV crosses over itself, it is possible to reduce this propagation of image alignment errors within the mosaic. A Kalman filter with augmented state is proposed to optimally estimate both the visual map and the vehicle position

Study and modeling of the desintegration kinetics of coated paper

The disintegration of recovered paper is the first operation in the preparation of recycled pulp. It is known that the defibering process follows a first order kinetics from which it is possible to obtain the disintegration kinetic constant (KD) by means of different ways. The disintegration constant can be obtained from the Somerville index results (%lsv and from the dissipated energy per volume unit (Ss). The %slv is related to the quantity of non-defibrated paper, as a measure of the non-disintegrated fiber residual (percentage of flakes), which is expressed in disintegration time units. In this work, disintegration kinetics from recycled coated paper has been evaluated, working at 20 revise rotor speed and for different fiber consistency (6, 8, 10, 12 and 14%). The results showed that the values of experimental disintegration kinetic constant, Ko, through the analysis of Somerville index, as function of time. Increased, the disintegration time was drastically reduced. The calculation of the disintegration kinetic constant (modelled Ko), extracted from the Rayleigh’s dissipation function, showed a good correlation with the experimental values using the evolution of the Somerville index or with the dissipated energy

Study and modeling of the desintegration kinetics of coated paper

The disintegration of recovered paper is the first operation in the preparation of recycled pulp. It is known that the defibering process follows a first order kinetics from which it is possible to obtain the disintegration kinetic constant (KD) by means of different ways. The disintegration constant can be obtained from the Somerville index results (%lsv and from the dissipated energy per volume unit (Ss). The %slv is related to the quantity of non-defibrated paper, as a measure of the non-disintegrated fiber residual (percentage of flakes), which is expressed in disintegration time units. In this work, disintegration kinetics from recycled coated paper has been evaluated, working at 20 revise rotor speed and for different fiber consistency (6, 8, 10, 12 and 14%). The results showed that the values of experimental disintegration kinetic constant, Ko, through the analysis of Somerville index, as function of time. Increased, the disintegration time was drastically reduced. The calculation of the disintegration kinetic constant (modelled Ko), extracted from the Rayleigh’s dissipation function, showed a good correlation with the experimental values using the evolution of the Somerville index or with the dissipated energy

Altruisme robòtic

L'altruisme és cabdal en l'evolució humana perque contribueix al fet que els nostres gens passin a la següent generació.

Profile Following for Inspection of Underwater Structures

We present a seabed profile estimation and following method for close proximity inspection of 3D underwater structures using autonomous underwater vehicles (AUVs). The presented method is used to determine a path allowing the AUV to pass its sensors over all points of the target structure, which is known as coverage path planning. Our profile following method goes beyond traditional seabed following at a safe altitude and exploits hovering capabilities of recent AUV developments. A range sonar is used to incrementally construct a local probabilistic map representation of the environment and estimates of the local profile are obtained via linear regression. Two behavior-based controllers use these estimates to perform horizontal and vertical profile following. We build upon these tools to address coverage path planning for 3D underwater structures using a (potentially inaccurate) prior map and following cross-section profiles of the target structure. The feasibility of the proposed method is demonstrated using the GIRONA 500 AUV both in simulation using synthetic and real-world bathymetric data and in pool trials

JXTA-Overlay P2P Platform and Its Application for Robot Control

The design of an efficient collaborative multirobot framework that ensures the autonomy and the individualrequirements of the involved robots is a very challenging task. This requires designing an efficient platform for inter-robot communication. P2P is a good approach to achieve this goal. P2P aims at making the communication ubiquitous thereby crossing the communication boundary and has many attractive features to use it as a platform for collaborative multi-robot environments. In this work, we present the JXTA Overlay P2P system and its application for robot control. Since JXTAOverlay is able to overcome Firewalls, Routers and NATs, it is possible to control end-devices in a WAN without changing the network security policy. We used JXTA-Overlay for the control of robot motors. We evaluated the proposed system by many experiments and have shown that the proposed system has a good performance and can be used successfully for the control of robot.

Impingement jet cooling of end windings in a high-speed electric machine

The rotational speed of high-speed electric machines is over 15 000 rpm. These machines are compact in size when compared to the power rate. As a consequence, the heat fluxes are at a high level and the adequacy of cooling becomes an important design criterion. In the high-speed machines, the air gap between the stator and rotor is a narrow flow channel. The cooling air is produced with a fan and the flow is then directed to the air gap. The flow in the gap does not provide sufficient cooling for the stator end windings, and therefore additional cooling is required. This study investigates the heat transfer and flow fields around the coil end windings when cooling jets are used. As a result, an innovative and new assembly is introduced for the cooling jets, with the benefits of a reduced amount of hot spots, a lower pressure drop, and hence a lower power need for the cooling fan. The gained information can also be applied to improve the cooling of electric machines through geometry modifications. The objective of the research is to determine the locations of the hot spots and to find out induced pressure losses with different jet alternatives. Several possibilities to arrange the extra cooling are considered. In the suggested approach cooling is provided by using a row of air jets. The air jets have three main tasks: to cool the coils effectively by direct impingement jets, to increase and cool down the flow that enters the coil end space through the air gap, and to ensure the correct distribution of the flow by forming an air curtain with additional jets. One important aim of this study is the arrangement of cooling jets in such manner that hot spots can be avoided to wide extent. This enables higher power density in high-speed motors. This cooling system can also be applied to the ordinary electric machines when efficient cooling is needed. The numerical calculations have been performed using a commercial Computational Fluid Dynamics software. Two geometries have been generated: cylindrical for the studied machine and Cartesian for the experimental model. The main parameters include the positions, arrangements and number of jets, the jet diameters, and the jet velocities. The investigated cases have been tested with two widely used turbulence models and using a computational grid of over 500 000 cells. The experimental tests have been made by using a simplified model for the end winding space with cooling jets. In the experiments, an emphasis has been given to flow visualisation. The computational analysis shows good agreement with the experimental results. Modelling of the cooling jet arrangement enables also a better understanding of the complex system of heat transfer at end winding space.

Metsäkonetuotannon hitsauksen robotisointi

Diplomityön tavoitteena oli selvittää robottihitsauksen antamat mahdollisuudet metsäkoneen runkorakenteiden hitsauksessa. Työn teoriaosassa selvitettiin kaarihitsauksen automatisointia ja sen tuomia etuja manuaaliseen hitsaukseen verrattuna. Työssä käytiin läpi kaarihitsauksen automatisointiinsoveltuvat robottivaihtoehdot, nykyaikaisen robotin hitsausvarustus, sekä kappaleenkäsittelylaitteet ja robotisoidun käytön turvallisuus. Hitsauksen robotisointiin soveltuvat eri hitsausmenetelmät ja perinteisten menetelmien tehostamiskeinot käytiin lävitse teoriaosuudessa. Hitsaustuotannon laatuun vaikuttavia asioitaja robottihitsattavan kappaleen suunnittelun huomioonottamista tuotesuunnittelussa tarkasteltiin myös työn teoriaosuudessa. Käytännön osiossa tarkasteltiin robotilla hitsattavat tuotteet ja tehtiin niille luoksepäästävyystarkasteluja. Laadittiin vaatimusluettelo tarvittavalle hitsausrobottilaitteistolle ja mallinnettiin erilaisia vaihtoehtoisia ratkaisuja hitsausrobottiympäristöstä kaarihitsauksen graafista simulointiohjelmaa käyttäen. Vertailtiin eri laitetoimittajilta saatuja 'avaimet käteen'- periaatteella tarjottuja ratkaisuja janiiden vastaavuutta laadittuun vaatimusluetteloon sekä eri laiteratkaisujen keskinäistä paremmuutta kyseiseen tapaukseen. Päätuotteille määritettiin hitsausajat ja selvitettiin laitteiston hitsauskapasiteettia. Investoinnin taloudellista kannattavuutta tarkasteltiin eri laskentamenetelmien avulla. Lopuksi arvioitiin hitsaustuotannon jatkokehitystarpeita tulevaisuutta ajatellen.

Voimalaitoksen ylläpitosuunnitelma

Tässä diplomityössä on tehtyylläpitosuunnitelma Oulun Energian Toppila 1 - voimalaitokselle, jota on tavoitteena käyttää vuoteen 2015. Työssä on tarkasteltu aluksi voimalaitoksen tulevaisuuden käytön näkymiä ja tärkeimpien järjestelmien käyttökuntoa. Kattilalaitoksenkriittisille komponenteille on suoritettu ylläpito- ja epäkäytettävyyskustannusten vertailu sekä pyritty selvittämään komponenteille paras ylläpitomalli. Turbiinille on analysoitu erilaisia revisio- ja tarkastusmahdollisuuksia, ja vertailtu niistä muodostuvia kustannuksia. Tulosten perusteella voidaan sanoa, että tehostetut ylläpitotoimenpiteet ovat jatkossa kriittisille komponenteille taloudellisin ylläpitomalli, koska riittävällä määrällä tarkastuksia jakorjauksia voidaan hallita ongelmallisimpien komponenttien vaurioitumiskäyttäytymistä. Jos voimalaitosta käytetään vuoteen 2015, saattavat uusia investointeja olla eko I, eko II ja tertiääritulistin. Tämän työn perusteella investointeja eikannata tehdä, mutta komponenttien kuntoa sen sijaan on syytä arvioida vuosittain. Turbiinin kriittiset komponentit vaikuttaisivat olevan suhteellisen hyvässä kunnossa. Suurimmat vaurioitumismahdollisuudet liittyvät juoksusiipien väsymisvaurioihin.

A programming environment having three levels of complexity for mobile robotics = Entorno de programación con tres niveles de complejidad para robótica móvil

This paper presents a programming environment for supporting learning in STEM, particularly mobile robotic learning. It was designed to maintain progressive learning for people with and without previous knowledge of programming and/or robotics. The environment was multi platform and built with open source tools. Perception, mobility, communication, navigation and collaborative behaviour functionalities can be programmed for different mobile robots. A learner is able to programme robots using different programming languages and editor interfaces: graphic programming interface (basic level), XML-based meta language (intermediate level) or ANSI C language (advanced level). The environment supports programme translation transparently into different languages for learners or explicitly on learners’ demand. Learners can access proposed challenges and learning interfaces by examples. The environment was designed to allow characteristics such as extensibility, adaptive interfaces, persistence and low software/hardware coupling. Functionality tests were performed to prove programming environment specifications. UV BOT mobile robots were used in these tests

Ylisoonisen yksivaiheisen aksiaaliturbiinin suunnittelu

Tässä diplomityössä suunnitellaan yksivaiheisen turbiinin ylisooninen staattori ja alisooninen roottori, tulo-osa ja diffuusori. Työn alussa tarkastellaan aksiaaliturbiinin käyttökohteita ja teoriaa, jonka jälkeen esitetään suunnittelun perustana olevat menetelmät ja periaatteet. Perussuunnittelu tehdään Traupelinmenetelmällä WinAxtu 1.1 suunnitteluohjelmalla ja hyötysuhde arvioidaan lisäksiExcel-pohjaisella laskennalla. Ylisooninen staattori suunnitellaan perussuunnittelun tuloksiin perustuen, soveltamalla karakteristikoiden menetelmää suuttimen laajenevaan osaan ja pinta-alasuhteita suppenevaan osaan. Roottorin keskiviiva piirretään Sahlbergin menetelmällä ja siiven muoto määritetään A3K7 paksuusjakauman sekä tiheän siipihilan muotoilun periaatteita yhdistämällä. Tulo-osa suunnitellaan mahdollisimman jouhevaksi geometriatietojen ja kirjallisuuden esimerkkien mukaisesti. Lopuksi tulo-osaa mallinnetaan CFD-laskennalla. Diffuusori suunnitellaan käyttämällä soveltuvin osin kirjallisuudessa esitettyjätietoja, tulo-osan geometriaa ja CFD-laskentaa. Suunnittelutuloksia verrataan lopuksi kirjallisuudessa esitettyihin tuloksiin ja arvioidaan suunnittelun onnistumista sekä mahdollisia ongelmakohtia.