On the mechanism of the formation of horizontal cracks in a vertical column of saturated sand

Extended horizontal cracks have! been observed experimentally in a vertical column of saturated sand when a flow of water is forced to percolate upward through it. This paper provides a theory for this phenomenon. It will be shown that the presence of inhomogeneity in permeability along the length of the column is essential for such cracks to develop. It will also be shown that small initial inhomogeneity may be magnified through the transport of the finer component of the sand by percolation. Under certain conditions liquefaction takes place at a section of the sand column causing a crack to initiate and grow there. This theory is found to be in good qualitative agreement with the experimental findings.

Detección oportuna de niños en riesgo pre-lector : ponderación del valor potencial de instrumentos de evaluación de la consciencia fonológica

Se evalúan validez, confiabilidad y nivel de dificultad de instrumentos de evaluación de la conciencia fonológica, a fin de analizar su potencialidad como herramientas de detección oportuna, de pre-lectores en riesgo en una muestra de niños que crecen en un ambiente de vulnerabilidad social. Los instrumentos se seleccionaron en función de los dos niveles de CF: unidad lingüística y nivel de dificultad. Se ponderó la validez del instrumento mediante la técnica de análisis de contenido de investigaciones previas. Obtuvo buena confiabilidad (alpha de Cronbach: 0.84) y potencialidad discriminativa. Se hallan niveles diferenciales de dificultad en la resolución de las distintas tareas en pre-lectores en riesgo en comparación con buenos lectores de la misma edad. El análisis de regresión simple destaca el valor predictivo de las tareas de evaluación seleccionadas en este estudio sobre el posterior nivel alcanzado por los niños en habilidades básicas de la lectura.

An In-Situ Observation On Initial Aggregation Process Of Colloidal Particles Near Three-Phase Contact Line Of Air, Water And Vertical Substrate

The self-assembling process near the three-phase contact line of air, water and vertical substrate is widely used to produce various kinds of nanostructured materials and devices. We perform an in-situ observation on the self-assembling process in the vicinity of the three phase contact line. Three kinds of aggregations, i.e. particle-particle aggregation, particle-chain aggregation and chain-chain aggregation, in the initial stage of vertical deposition process are revealed by our experiments. It is found that the particle particle aggregation and the particle-chain aggregation can be qualitatively explained by the theory of the capillary immersion force and mirror image force, while the chain-chain aggregation leaves an opening question for the further studies. The present study may provide more deep insight into the self-assembling process of colloidal particles.

Role Of Vertical Component Of Surface Tension Of The Droplet On The Elastic Deformation Of Pdms Membrane

Poly(dimethylsiloxane) (PDMS) has been widely used in lab-on-a-chip and micro- total analysis systems (mu-TAS), thus wetting and electrowetting behaviors of PDMS are of great importance in these devices. PDMS is a kind of soft polymer material, so the elastic deformation of PDMS membrane by a droplet cannot be neglected due to the vertical component of the interfacial tension between the liquid and vapor, and this vertical component of liquid-vapor surface tension is also balanced by the stress distribution within the PDMS membrane. Such elastic deformation and stress distribution not only affect the exact measurement of contact angle, but also have influence on the micro-fluidic behavior of the devices. Using ANSYS code, we simulated numerically the elastic deformation and stress distribution of PDMS membrane on a rigid substrate due to the liquid-vapor surface tension. It is found that the vertical elastic deformation of the PDMS membrane is on the order of several tens of nanometers due to the application of a droplet with a diameter of 2.31 mm, which is no longer negligible for lab-on-a-chip and mu-TAS. The vertical elastic deformation increases with the thickness of the PDMS membrane, and there exists a saturated membrane thickness, regarded as a semi-infinite membrane thickness, and the vertical elastic deformation reaches a limiting value when the membrane thickness is equal to or thicker than such saturated thickness. (C) Koninklijke Brill NV, Leiden, 2008.

Reconstructing The Vertical Distribution Of The Aeolian Saltation Mass Flux Based On The Probability Distribution Of Lift-Off Velocity

The probability distribution of lift-off velocity of the saltating grains is a bridge to linking microscopic and macroscopic research of aeolian sand transport. The lift-off parameters of saltating grains (i.e., the horizontal and vertical lift-off velocities, resultant lift-off velocity, and lift-off angle) in a wind tunnel are measured by using a Phase Doppler Particle Analyzer (PDPA). The experimental results show that the probability distribution of horizontal lift-off velocity of saltating particles on a bed surface is a normal function, and that of vertical lift-off velocity is an exponential function. The probability distribution of resultant lift-off velocity of saltating grains can be expressed as a log-normal function, and that of lift-off angle complies with an exponential function. A numerical model for the vertical distribution of aeolian mass flux based on the probability distribution of lift-off velocity is established. The simulation gives a sand mass flux distribution which is consistent with the field data of Namikas (Namikas, S.L., 2003. Field measurement and numerical modelling of acolian mass flux distributions on a sandy beach, Sedimentology 50, 303-326). Therefore, these findings are helpful to further understand the probability characteristics of lift-off grains in aeolian sand transport. (c) 2007 Elsevier B.V. All rights reserved.

Hydrodynamic interaction between two vertical cylinders in water waves

The hydrodynamic interaction between two vertical cylinders in water waves is investigated based on the linearized potential flow theory. One of the two cylinders is fixed at the bottom while the other is articulated at the bottom and oscillates with small amplitudes in the direction of the incident wave. Both the diffracted wave and the radiation wave are studied in the present paper. A simple analytical expression for the velocity potential on the surface of each cylinder is obtained by means of Graf's addition theorem. The wave-excited forces and moments on the cylinders, the added masses and the radiation damping coefficients of the oscillating cylinder are all expressed explicitly in series form. The coefficients of the series are determined by solving algebraic equations. Several numerical examples are given to illustrate the effects of various parameters, such as the separation distance, the relative size of the cylinders, and the incident angle, on the first-order and steady second-order forces, the added masses and radiation-damping coefficients as well as the response of the oscillating cylinder.

Numerical study on rainfall infiltration in rock-soil slop

A mathematical model for the rain infiltration in the rock-soil slop has been established and solved by using the finite element method. The unsteady water infiltrating process has been simulated to get water content both in the homogeneous and heterogeneous media. The simulated results show that the rock blocks in the rock-soil slop can cause the wetting front moving fast. If the rain intensity is increased, the saturated region will be formed quickly while other conditions are the same. If the rain intensity keeps a constant, it is possible to accelerate the generation of the saturated region by properly increasing the vertical filtration rate of the rock-soil slop. However, if the vertical filtration rate is so far greater than the rain intensity, it will be difficult to form the saturated region in the rock-soil slop. The numerical method was verified by comparing the calculation results with the field test data.

Synchronization of modified Chua's circuit with x vertical bar x vertical bar function

This paper considers the chaos synchronization of the modified Chua's circuit with x vertical bar x vertical bar function. We firstly show that a couple of the modified Chua systems with different parameters and initial conditions can be synchronized using active control when the values of parameters both in drive system and response system are known aforehand. Furthermore, based on Lyapunov stability theory we propose an adaptive active control approach to make the states of two identical Chua systems with unknown constant parameters asymptotically synchronized. Moreover the designed controller is independent of those unknown parameters. Numerical simulations are given to validate the proposed synchronization approach.

Posibilidades de control químico de malezas con Imazethapyr en pre emergencia sobre el cultivo de soya (Glycine max (L) Merr)

Se realizó un estudio de evaluación de imazethapyr en diferentes dosis sobre el control de malezas el cultivo de la soya, en terrenos del centro experimental del algodón (CEA); siendo estos imazethapyr en dosis de 0.53, 0.70, y 1.06 1/ha, limpia mecánica a los 15 y 30 días y enhierbano todo el tiempo. Se logró determinar que ninguna de las tres dosis presento fitotoxicidad sobre el cultivo y que las dosis de 0.7 y 1.06 1/ha ejercieron buen control sobre las diferentes especies de malezas (monocotiledonias, dicotiledóneas, y ciperáceas). Sobre los rendimientos ninguna de las tres dosis estudiadas manifestó efecto negativo .

Effect of a laser pre-quenched steel substrate surface on the crack driving force in a coating-steel substrate system

A mechanical model of a coating/laser pre-quenched steel substrate specimen with a crack oriented perpendicular to the interface between the coating and the hardened layer is developed to quantify the effects of the residual stress and hardness gradient on the crack driving force in terms of the J-integral. It is assumed that the crack tip is in the middle of the hardened layer of the pre-quenched steel substrate. Using a composite double cantilever beam model, analytical solutions can be derived, and these can be used to quantify the effects of the residual stress and the hardness gradient resulting from the pre-quenched steel substrate surface on the crack driving force. A numerical example is presented to investigate how the residual compressive stress, the coefficient linking microhardness and yield strength and the Young's modulus ratio of the hardened layer to the coating influence the crack driving force for a given crack length. (C) 2007 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Evaluación comparativa de concentrados pre-iniciadores comerciales vs. ración convencional para cerdos en etapa de iniciación

En las instalaciones de Porcina Gallo Solo S.A. ubicadas en el Departamento de León, se efectuó una prueba de alimentación durante el periodo comprendido del 31 de Enero al 21 de Abril, para verificar la calidad de tres concentrados comerciales (A,B,C), al compararlos con una ración convencional (D), en cerdos en etapa de iniciación. El experimento comprendió 2 etapas. Inicialmente se utilizaron las camadas provenientes de 24 cerdas, distribuidas al azar en 4 grupos, a las cuales se llevo registro de peso semanal y consumo de alimentos, hasta los 42 días, fecha de destete. El diseño utilizado fue completamente azarizado. Como segunda etapa se seleccionaron 72 cerdos de 7-8 semanas de edad, se desparasitaron y fueron distribuidos en 4 tratamientos, y continuaron recibiendo sus respectivos concentrados pre-iniciadores durante 3 semanas, hasta alcanzar aproximadamente 23 kilogramos de peso vivo. El numero de cerdos destetados por camada fue sometido a análisis de varianza; y las ganancias de peso vivo en ambos periodos analizados fueron sometidos a análisis de covarianza y prueba de Duncan. La ganancia de peso vivo, de 5.45 kilogramos obtenida por los lechones en el tratamiento "D", durante el periodo de lactancia, fue similar a la de los tratamientos "A" y "C", pero significativamente diferente P(.05), con la lograda por el tratamiento "B", de 3.78 kilogramos. La mayor ganancia de peso vivo, durante el periodo post-destete, se obtuvo con los cerdos que recibian la racion comercial "B" (9.59 kgs), la que fue similar a la del tratamiento "D"; siendo diferentes de las obtenidas con los tratamientos "A" (6.09 kgs.) y "C" (7.52 kgs.). El mayor promedio, de 8.66 lechones destetados por camada, se obtuvo con el tratamiento "C". Sin embargo no se encontraron diferencias significativas al compararlo con los resultados obtenidos con los tratamientos A, B y D respectivamente. El tratamiento "B" resulto ser la ración comercial mas económica, revelando un costo unitario de C$ 3.. por kilogramo de cerdo producido durante el periodo post-destete. Los costos unitarios obtenidos con los tratamientos "A" (C$ 3.93) y "C" (3.88) fueron mayores a los obtenidos con el testigo "D" (3.36).