Stochastic Modelling Using Markov Chains

Department of Statistics, Cochin University of Science and Technology

Investigations on Dezincification of Brass and Epoxy Coated Brass

Brasses are widely used as constructional materials in marine environment due to their anticorrosive,antifouling and mechanical properties.However, its resistance to corrosion and fouling may vary according to local marine environmental condition and the seasons.The dezincification of brass is one of the forms of selective corrosion which has attracted the attention of researchers for the last two decades.Many of the dezincification mechanistic studies have been performed in noncomplex media and hence their conclusions cannot be extended to esturine water,which is of great significance since brass is extensively used in marine environment.Inhibited α brasses are largely immune to dezincication and the effect of tin and arsenic addition to α/beta brasses is not so reliable in controlling the dezincification. There have been many cases of dezincification in duplex brasses in both freshwater and seawater.Though there is some protection methods such as inhibitors,electro deposition and electro polymerization,there is no reliable method of inhibiting the dezincification of two-phase brass.Organic coatings are effectively used for the protection metals due to their capacity to act a physical barrieer between the metal surface and corrosive environment.Hence,pure epoxy coating is selected for this as it has antocorrosiion effect on brass.The dezincification behaviour of brass of the present study has been highlighted in terms of corrosion rate,weight gain/loss,corrosion current and polarization resistence,open circuit potential,dezincification factor. The marine fouling as biomass on brass was assessed and presented in this thesis, The physicochemical properties of estuarine water were correlated with corrosion behaviour of brass.The deterioration of the brass subjected to the effect of estuarine water was also investigated as a measure of loss in mechanical properties such as tensile strength,yield strength,percntage elongation and percentage reduction in area.To validate dezincification data,visual observation,spot analysis,surface morphology before and after removal of corrosion products and corrosion product analysis were performed.The dezincification behavior of epoxy coated brass of the present study has beenhighlighted in terms of corrosion rate ,weight gain/loss,corrosion current and polarization resistance,open circuit potential.dezincification factor.The marine fouling as biomass on epoxy coated brass subjeted to the effect of estuarine water was also investigated as ameasure of loss in mechanical properties such as tensile strength,percentage elongation and percentage reduction in area.The results of dezincification behavior of brass and epoxy coated brass in Cochin estuary water has been presented and discussed.Attempt has been made to correlate the dezincification behavior of brass with epoxy coated brass.

Curing studies of elastomer blends with special reference to NR/ NBR and NR/BR blends

There are a large number of commercial examples and property advantages of immiscible elastomer blends.73 Blends of natural rubber (NR) and polybutadiene (BR) have shown various advantages including heat stability, improved elasticity and abrasion resistance. Ethylene-propylene-diene-rubber (EPDM) blended with styrene-butadiene rubber (SBR) has shown improvements in ozone and chemical resistance with better compression set properties. Blends of EPDM and nitrile rubber (NBR) have been cited as a compromise for obtaining moderate oil and ozone resistance with improved low temperature properties. Neoprene (CR)/BR blends offer improved low temperature properties and abrasion resistance with better processing characteristics etc. However, in many of the commercial two-phase elastomer blends, segregation of the crosslinking agents, carbon black or antioxidants preferentially into one phase can result in failure to attain optimum properties. Soluble and insoluble compounding ingredients are found to be preferentially concentrated in one phase. The balance of optimum curing of both phases therefore presents a difficult problem. It has been the aim of this study to improve the performance of commercially important elastomer blends such as natural rubber (NR)/styrene-butadiene rubber (SBR) and natural rubber/polybutadiene rubber (BR) by industrially viable procedures

Dezincification of Epoxy Coated Brass in Cochin Estuary, India

Inhibited α brasses are largely immune to dezincification in most water, but the effect of tin and arsenic addition to α/β brasses is not so reliable or predictable in controlling the problem. There have been many cases of dezincification in duplex brasses in both fresh water and seawater. There is no reliable method of inhibiting the dezincification of two-phase brass despite there are some protection methods such as inhibitors, electro deposition and electro polymerization. Organic coatings are effectively used for the protection of metals due to their capacity to act as a physical barrier between the metal surface and corrosive environment. Hence, epoxy coating on brass was applied and effect of this against dezincification in Cochin estuarine water over a period of one year was studied and reported in this paper

Exploiting non-Markovianity for quantum control

Quantum technology, exploiting entanglement and the wave nature of matter, relies on the ability to accurately control quantum systems. Quantum control is often compromised by the interaction of the system with its environment since this causes loss of amplitude and phase. However, when the dynamics of the open quantum system is non-Markovian, amplitude and phase flow not only from the system into the environment but also back. Interaction with the environment is then not necessarily detrimental. We show that the back-flow of amplitude and phase can be exploited to carry out quantum control tasks that could not be realized if the system was isolated. The control is facilitated by a few strongly coupled, sufficiently isolated environmental modes. Our paradigmatic example considers a weakly anharmonic ladder with resonant amplitude control only, restricting realizable operations to SO(N). The coupling to the environment, when harnessed with optimization techniques, allows for full SU(N) controllability.

Microscale thermal engineering of electronic systems

The electronics industry is encountering thermal challenges and opportunities with lengthscales comparable to or much less than one micrometer. Examples include nanoscale phonon hotspots in transistors and the increasing temperature rise in onchip interconnects. Millimeter-scale hotspots on microprocessors, resulting from varying rates of power consumption, are being addressed using two-phase microchannel heat sinks. Nanoscale thermal data storage technology has received much attention recently. This paper provides an overview of these topics with a focus on related research at Stanford University.

Preconditioning and iterative solution of symmetric indefinite linear systems arising from interior point methods for linear programming

We study the preconditioning of symmetric indefinite linear systems of equations that arise in interior point solution of linear optimization problems. The preconditioning method that we study exploits the block structure of the augmented matrix to design a similar block structure preconditioner to improve the spectral properties of the resulting preconditioned matrix so as to improve the convergence rate of the iterative solution of the system. We also propose a two-phase algorithm that takes advantage of the spectral properties of the transformed matrix to solve for the Newton directions in the interior-point method. Numerical experiments have been performed on some LP test problems in the NETLIB suite to demonstrate the potential of the preconditioning method discussed.

Application for fault location in electrical power distribution systems

Fault location has been studied deeply for transmission lines due to its importance in power systems. Nowadays the problem of fault location on distribution systems is receiving special attention mainly because of the power quality regulations. In this context, this paper presents an application software developed in Matlabtrade that automatically calculates the location of a fault in a distribution power system, starting from voltages and currents measured at the line terminal and the model of the distribution power system data. The application is based on a N-ary tree structure, which is suitable to be used in this application due to the highly branched and the non- homogeneity nature of the distribution systems, and has been developed for single-phase, two-phase, two-phase-to-ground, and three-phase faults. The implemented application is tested by using fault data in a real electrical distribution power system

Spondyloarthropathies in autoimmune diseases and vice versa

Polyautoimmunity is one of the major clinical characteristics of autoimmune diseases (ADs). The aim of this study was to investigate the prevalence of ADs in spondyloarthropathies (SpAs) and vice versa. This was a two-phase cross-sectional study. First, we examined the presence of ADs in a cohort of patients with SpAs (). Second, we searched for the presence of SpAs in a well-defined group of patients with ADs () including rheumatoid arthritis (RA), systemic lupus erythematosus (SLE), and Sjögren’s syndrome (SS). Among patients with SpAs, ankylosing spondylitis was observed in the majority of them (55.6%). There were two patients presenting with SS in the SpA group (1.4%) and 5 patients with autoimmune thyroiditis (3.5%). The global prevalence of ADs in SpAs was 4.86%. In the ADs group, there were 5 patients with SpAs (0.46%). Our results suggest a lack of association between SpAs and ADs. Accordingly, SpAs might correspond more to autoinflammatory diseases rather than to ADs.

Prevalencia de enfermedad celiaca en Latinoamérica: revisión sistemática de la literatura y meta-análisis

Introducción: La enfermedad celiaca (EC) es una enfermedad autoinmune (EA) intestinal desencadenada por la ingesta de gluten. Por la falta de información de la presencia de EC en Latinoamérica (LA), nosotros investigamos la prevalencia de la enfermedad en esta región utilizando una revisión sistemática de la literatura y un meta-análisis. Métodos y resultados: Este trabajo fue realizado en dos fases: La primera, fue un estudio de corte transversal de 300 individuos Colombianos. La segunda, fue una revisión sistemática y una meta-regresión siguiendo las guías PRSIMA. Nuestros resultados ponen de manifiesto una falta de anti-transglutaminasa tisular (tTG) e IgA anti-endomisio (EMA) en la población Colombiana. En la revisión sistemática, 72 artículos cumplían con los criterios de selección, la prevalencia estimada de EC en LA fue de 0,46% a 0,64%, mientras que la prevalencia en familiares de primer grado fue de 5,5 a 5,6%, y en los pacientes con diabetes mellitus tipo 1 fue de 4,6% a 8,7% Conclusión: Nuestro estudio muestra que la prevalencia de EC en pacientes sanos de LA es similar a la notificada en la población europea.

A qualitative analysis of immigrant population health practices in the Girona Healthcare Region

The research we present here forms part of a two-phase project - one quantitative and the other qualitative - assessing the use of primary health care services. This paper presents the qualitative phase of said research, which is aimed at ascertaining the needs, beliefs, barriers to access and health practices of the immigrant population in comparison with the native population, as well as the perceptions of healthcare professionals. Moroccan and sub-Saharan were the immigrants to who the qualitative phase was specifically addressed. The aims of this paper are as follows: to analyse any possible implications of family organisation in the health practices of the immigrant population; to ascertain social practices relating to illness; to understand the significances of sexual and reproductive health practices; and to ascertain the ideas and perceptions of immigrants, local people and professionals regarding health and the health system. Methods: qualitative research based on discursive analysis. Data gathering techniques consisted of discussion groups with health system users and semi-structured individual interviews with healthcare professionals. The sample was taken from the Basic Healthcare Areas of Salt and Banyoles (belonging to the Girona Healthcare Region), the discussion groups being comprised of (a) 6 immigrant Moroccan women, (b) 7 immigrant sub-Saharan African women and (c) 6 immigrant and native population men (2 native men, 2 Moroccan men and 2 sub-Saharan men); and the semi-structured interviews being conducted with the following healthcare professionals: (a) 3 gynaecologists, (b) 3 nurses and 1 administrative staff. Results: use of the healthcare system is linked to the perception of not being well, knowledge of the healthcare system, length of time resident in Spain and interiorization of traditional Western medicine as a cure mechanism. The divergences found among the groups of immigrants, local people and healthcare professionals with regard to healthcare education, use of the healthcare service, sexual and reproductive healthcare and reticence with regard to being attended by healthcare personnel of the opposite sex demonstrate a need to work with the immigrant population as a heterogeneous group. Conclusions: the results we have obtained support the idea that feeling unwell is a psycho-social process, as it takes place within a specific socio-cultural situation and spans a range of beliefs, perceptions and ideas regarding symptomology and how to treat it

Polydispersity-induced macrophase separation in diblock copolymer melts

The effect of A-block polydispersity on the phase behavior of AB diblock copolymer melts is examined using a complete self-consistent field theory treatment that allows for fractionation of the parent molecular-weight distribution. In addition to observing the established shift in phase boundaries, we find the emergence of significant two-phase coexistence regions causing, for instance, the disappearance of the complex phase window. Furthermore, we find evidence that polydispersity relieves packing frustration, which will reduce the tendency for long-range order.

What do patients want to know about their medicines, and what do doctors want to tell them?: a comparative study

A two phase study is reported. In the first phase, we asked a number of doctors to rate a list of information categories (identified by Berry, Gillie and Banbury 1995) in terms of how important they felt it was for the items to be included in an explanation to a patient about a drug prescription. In the second phase, we presented a large sample of people with a scenario about visiting their doctor and being prescribed medication, together with an explanation about the prescription which was said to be provided by the doctor. Four different explanations were compared, which were either based on what people in our earlier study wanted to know about drug prescriptions or on what the doctors thought it was important lo tell them. We also manipulated whether or not the explanations conveyed negative information (e.g. about the possible side effects of the medication). The results showed that people 'preferred' the explanations based on what the participants in the earlier study wanted to know about their medicines, rather than those based on what the doctors thought they should be told. They also 'preferred' the explanations that did not convey negative information, rather than those that did convey some negative information. In addition, the inclusion of negative information affected ratings of likely compliance with the prescribed medication.

The structure of crystallisable copolymers of L-lactide, epsilon-caprolactone and glycolide

We apply a new X-ray scattering approach to the study of melt-spun filaments of tri-block and random terpolymers prepared from lactide, caprolactone and glycolide. Both terpolymers contain random sequences, in both cases the overall fraction of lactide units is similar to 0.7 and C-13 and H-1 NMR shows the lactide sequence length to be similar to 9-10. A novel representation of the X-ray fibre pattern as series of spherical harmonic functions considerably facilitates the comparison of the scattering from the minority crystalline phase with hot drawn fibres prepared from the poly(L-lactide) homopolymer. Although the fibres exhibit rather disordered structures we show that the crystal structure is equivalent to that displayed by poly(L-lactide) for both the block and random terpolymers. There are variations in the development of a two-phase structure which reflect the differences in the chain architectures. There is evidence that the random terpolymer includes non-lactide units in to the crystal interfaces to achieve a well defined two-phase structure. (c) 2005 Published by Elsevier Ltd.