Cost-effectiveness of a new combined immunosuppressive and anti-infectious regimen in kidney transplantation.

OBJECTIVES: The aims of this study were to assess the 1-year cost-effectiveness of a new combined immunosuppressive and anti-infectious regimen in kidney transplantation to prevent both rejection and infectious complications. METHODS: Patients (pts) transplanted from January 2000 to March 2003 (Group A) and treated with a conventional protocol were compared with pts submitted to a combined regimen including universal cytomegalovirus (CMV) prophylaxis between April 2003 and July 2005 (Group B). Costs were computed from the hospital accounting system for hospital stays, and official tariffs for outpatient visits. Patients with incomplete costs data were excluded from analysis. RESULTS: Fifty-three patients were analyzed in Group A, and 60 in Group B. Baseline characteristics including CMV serostatus were not significantly different between the two groups. Over 12 months after transplantation, acute rejections decreased from 41.5 percent in Group A to 6.7 percent in Group B (p < .001), and CMV infections from 47 percent to 15 percent (p < .001). Overall, readmissions decreased from 68 percent to 55 percent (p = .160), and average hospital days from 28 +/- 19 to 20 +/- 11 days (p < .007). The average number of outpatient visits decreased from 49 +/- 10 to 39 +/- 8 (p < .001). Average 1-year immunosuppressive and CMV prophylaxis costs (per patient) increased from CHF20,402 +/- 7,273 to 27,375 +/- 6,063 (p < .001), graft rejection costs decreased from CHF4,595 +/- 10,182 to 650 +/- 3,167 (p = .005), CMV treatment costs from CHF2,270 +/- 6,161 to 101 +/- 326 (p = .008), and outpatient visits costs from CHF8,466 +/- 1'721 to 6,749 +/- 1,159 (p < .001). Altogether, 1-year treatment costs decreased from CHF39'957 +/- 16,573 to 36,204 +/- 6,901 (p = .115). CONCLUSIONS: The new combined regimen administered in Group B was significantly more effective, and its additional costs were more than offset by savings associated with complications avoidance.

Finding the Fit Between Engineering Design and Cost Information

This paper analyzes the possibilities of integrating cost information and engineering design. Special emphasis is put on finding the potential of using the activity-based costing (ABC) method. Today, the problem of cost estimation in engineering design is that there are two separate extremes of knowledge. On the one extreme, the engineers model the technical parametres behindcosts in great detail but do not get appropriate cost information to their elegant models. On the other extreme, the accounting professionals are stuck with traditional cost accounting methods driven by the procedures and cycles of financial accounting. Therefore, in many cases, the cost information needs of various decision making groups, for example design engineers, are not served satisfactorily. This paper studies if the activity-based costing (ABC) method could offer a compromise between the two extremes. Recognizing activities and activity chains as well as activity and cost drivers could be specially beneficial for design engineers. Also, recognizing the accurate and reliable product costs of existing products helps when doing variant design. However, ABC is not at its best if the cost system becomes too complicated. This is why a comprehensive ABC-cost information system with detailed cost information for the use of design engineers should be examined critically. ABC is at its best when considering such issues as which activities drive costs, the cost of product complexity, allocating indirect costs on the products, the relationships between processes and costs, and the cost of excess capacity.

Value added logistical support service: logistics cost structure and performance in the new concept. Part 3

The aim of this study is to present an Activity-Based Costing spreadsheet tool for analyzing the logistics costs. The tool can be used both by customer-companies and logistics service providers. The study discusses the influence of different activity models on costs. Additionally this paper discusses about the logistical performance across the total supply chain This study is carried out using ananalytical research approach and literature material has been used for supplementing the concerned research approach. Cost structure analysis was based on the theory of activity-based management. This study was outlined to spare part logistics in machine-shop industry. The outlines of logistics services and logisticalperformance discussed in this report are based on the new logistics business concept (LMS-concept), which has been presented earlier in the Valssi-project. Oneof the aims of this study is to increase awareness of different activity modelson logistics costs. The report paints an overall picture about the business environment and requirements for the new logistics concept.

Communicating Cost Information to Design Engineers using an Activity-based Costing Method

This paper analyzes the possibilities of integrating cost information and engineering design. Special emphasis is on finding the potential of using the activity-based costing (ABC) method when formulating cost information for the needs of design engineers. This paper suggests that ABC is more useful than the traditional job order costing, but the negative issue is the fact that ABC models become easily too complicated, i.e. expensive to build and maintain, and difficult to use. For engineering design the most suitable elements of ABC are recognizing activities of the company, constructing acitivity chains, identifying resources, activity and cost drivers, as wellas calculating accurate product costs. ABC systems including numerous cost drivers can become complex. Therefore, a comprehensive ABC based cost information system for the use of design engineers should be considered criticaly. Combining the suitable ideas of ABC with engineering oriented thinking could give competentresults.

Three essays in dynamic corporate finance

The three essays constituting this thesis focus on financing and cash management policy. The first essay aims to shed light on why firms issue debt so conservatively. In particular, it examines the effects of shareholder and creditor protection on capital structure choices. It starts by building a contingent claims model where financing policy results from a trade-off between tax benefits, contracting costs and agency costs. In this setup, controlling shareholders can divert part of the firms' cash ows as private benefits at the expense of minority share- holders. In addition, shareholders as a class can behave strategically at the time of default leading to deviations from the absolute priority rule. The analysis demonstrates that investor protection is a first order determinant of firms' financing choices and that conflicts of interests between firm claimholders may help explain the level and cross-sectional variation of observed leverage ratios. The second essay focuses on the practical relevance of agency conflicts. De- spite the theoretical development of the literature on agency conflicts and firm policy choices, the magnitude of manager-shareholder conflicts is still an open question. This essay proposes a methodology for quantifying these agency conflicts. To do so, it examines the impact of managerial entrenchment on corporate financing decisions. It builds a dynamic contingent claims model in which managers do not act in the best interest of shareholders, but rather pursue private benefits at the expense of shareholders. Managers have discretion over financing and dividend policies. However, shareholders can remove the manager at a cost. The analysis demonstrates that entrenched managers restructure less frequently and issue less debt than optimal for shareholders. I take the model to the data and use observed financing choices to provide firm-specific estimates of the degree of managerial entrenchment. Using structural econometrics, I find costs of control challenges of 2-7% on average (.8-5% at median). The estimates of the agency costs vary with variables that one expects to determine managerial incentives. In addition, these costs are sufficient to resolve the low- and zero-leverage puzzles and explain the time series of observed leverage ratios. Finally, the analysis shows that governance mechanisms significantly affect the value of control and firms' financing decisions. The third essay is concerned with the documented time trend in corporate cash holdings by Bates, Kahle and Stulz (BKS,2003). BKS find that firms' cash holdings double from 10% to 20% over the 1980 to 2005 period. This essay provides an explanation of this phenomenon by examining the effects of product market competition on firms' cash holdings in the presence of financial constraints. It develops a real options model in which cash holdings may be used to cover unexpected operating losses and avoid inefficient closure. The model generates new predictions relating cash holdings to firm and industry characteristics such as the intensity of competition, cash flow volatility, or financing constraints. The empirical examination of the model shows strong support of model's predictions. In addition, it shows that the time trend in cash holdings documented by BKS can be at least partly attributed to a competition effect.

Practical applications of a systematic approach to the chemical abatement of pollutants in water and air

The present dissertation is devoted to the systematic approach to the development of organic toxic and refractory pollutants abatement by chemical decomposition methods in aqueous and gaseous phases. The systematic approach outlines the basic scenario of chemical decomposition process applications with a step-by-step approximation to the most effective result with a predictable outcome for the full-scale application, confirmed by successful experience. The strategy includes the following steps: chemistry studies, reaction kinetic studies in interaction with the mass transfer processes under conditions of different control parameters, contact equipment design and studies, mathematical description of the process for its modelling and simulation, processes integration into treatment technology and its optimisation, and the treatment plant design. The main idea of the systematic approach for oxidation process introduction consists of a search for the most effective combination between the chemical reaction and the treatment device, in which the reaction is supposed to take place. Under this strategy,a knowledge of the reaction pathways, its products, stoichiometry and kinetics is fundamental and, unfortunately, often unavailable from the preliminary knowledge. Therefore, research made in chemistry on novel treatment methods, comprisesnowadays a substantial part of the efforts. Chemical decomposition methods in the aqueous phase include oxidation by ozonation, ozone-associated methods (O3/H2O2, O3/UV, O3/TiO2), Fenton reagent (H2O2/Fe2+/3+) and photocatalytic oxidation (PCO). In the gaseous phase, PCO and catalytic hydrolysis over zero valent ironsare developed. The experimental studies within the described methodology involve aqueous phase oxidation of natural organic matter (NOM) of potable water, phenolic and aromatic amino compounds, ethylene glycol and its derivatives as de-icing agents, and oxygenated motor fuel additives ¿ methyl tert-butyl ether (MTBE) ¿ in leachates and polluted groundwater. Gas-phase chemical decomposition includes PCO of volatile organic compounds and dechlorination of chlorinated methane derivatives. The results of the research summarised here are presented in fifteenattachments (publications and papers submitted for publication and under preparation).

Cost information in engineering design -Potentials and limitations of activity-based costing

The purpose of this thesis is to analyse activity-based costing (ABC) and possible modified versions ofit in engineering design context. The design engineers need cost information attheir decision-making level and the cost information should also have a strong future orientation. These demands are high because traditional management accounting has concentrated on the direct actual costs of the products. However, cost accounting has progressed as ABC was introduced late 1980s and adopted widely bycompanies in the 1990s. The ABC has been a success, but it has gained also criticism. In some cases the ambitious ABC systems have become too complex to build,use and update. This study can be called an action-oriented case study with some normative features. In this thesis theoretical concepts are assessed and allowed to unfold gradually through interaction with data from three cases. The theoretical starting points are ABC and theory of engineering design process (chapter2). Concepts and research results from these theoretical approaches are summarized in two hypotheses (chapter 2.3). The hypotheses are analysed with two cases (chapter 3). After the two case analyses, the ABC part is extended to cover alsoother modern cost accounting methods, e.g. process costing and feature costing (chapter 4.1). The ideas from this second theoretical part are operationalized with the third case (chapter 4.2). The knowledge from the theory and three cases is summarized in the created framework (chapter 4.3). With the created frameworkit is possible to analyse ABC and its modifications in the engineering design context. The framework collects the factors that guide the choice of the costing method to be used in engineering design. It also illuminates the contents of various ABC-related costing methods. However, the framework needs to be further tested. On the basis of the three cases it can be said that ABC should be used cautiously when formulating cost information for engineering design. It is suitable when the manufacturing can be considered simple, or when the design engineers are not cost conscious, and in the beginning of the design process when doing adaptive or variant design. If the design engineers need cost information for the embodiment or detailed design, or if manufacturing can be considered complex, or when design engineers are cost conscious, the ABC has to be always evaluated critically.

Welding time models for cost calculations in the early stages of the design process

It is generally accepted that between 70 and 80% of manufacturing costs can be attributed to design. Nevertheless, it is difficult for the designer to estimate manufacturing costs accurately, especially when alternative constructions are compared at the conceptual design phase, because of the lack of cost information and appropriate tools. In general, previous reports concerning optimisation of a welded structure have used the mass of the product as the basis for the cost comparison. However, it can easily be shown using a simple example that the use of product mass as the sole manufacturing cost estimator is unsatisfactory. This study describes a method of formulating welding time models for cost calculation, and presents the results of the models for particular sections, based on typical costs in Finland. This was achieved by collecting information concerning welded products from different companies. The data included 71 different welded assemblies taken from the mechanical engineering and construction industries. The welded assemblies contained in total 1 589 welded parts, 4 257 separate welds, and a total welded length of 3 188 metres. The data were modelled for statistical calculations, and models of welding time were derived by using linear regression analysis. Themodels were tested by using appropriate statistical methods, and were found to be accurate. General welding time models have been developed, valid for welding in Finland, as well as specific, more accurate models for particular companies. The models are presented in such a form that they can be used easily by a designer, enabling the cost calculation to be automated.

Cost-effectiveness of early detection of breast cancer in Catalonia (Spain)

Background: Breast cancer (BC) causes more deaths than any other cancer among women in Catalonia. Early detection has contributed to the observed decline in BC mortality. However, there is debate on the optimal screening strategy. We performed an economic evaluation of 20 screening strategies taking into account the cost over time of screening and subsequent medical costs, including diagnostic confirmation, initial treatment, follow-up and advanced care. Methods: We used a probabilistic model to estimate the effect and costs over time of each scenario. The effect was measured as years of life (YL), quality-adjusted life years (QALY), and lives extended (LE). Costs of screening and treatment were obtained from the Early Detection Program and hospital databases of the IMAS-Hospital del Mar in Barcelona. The incremental cost-effectiveness ratio (ICER) was used to compare the relative costs and outcomes of different scenarios. Results: Strategies that start at ages 40 or 45 and end at 69 predominate when the effect is measured as YL or QALYs. Biennial strategies 50-69, 45-69 or annual 45-69, 40-69 and 40-74 were selected as cost-effective for both effect measures (YL or QALYs). The ICER increases considerably when moving from biennial to annual scenarios. Moving from no screening to biennial 50-69 years represented an ICER of 4,469€ per QALY. Conclusions: A reduced number of screening strategies have been selected for consideration by researchers, decision makers and policy planners. Mathematical models are useful to assess the impact and costs of BC screening in a specific geographical area.

Persistence of Transmitted HIV-1 Drug Resistance Mutations Associated with Fitness Costs and Viral Genetic Backgrounds.

Transmission of drug-resistant pathogens presents an almost-universal challenge for fighting infectious diseases. Transmitted drug resistance mutations (TDRM) can persist in the absence of drugs for considerable time. It is generally believed that differential TDRM-persistence is caused, at least partially, by variations in TDRM-fitness-costs. However, in vivo epidemiological evidence for the impact of fitness costs on TDRM-persistence is rare. Here, we studied the persistence of TDRM in HIV-1 using longitudinally-sampled nucleotide sequences from the Swiss-HIV-Cohort-Study (SHCS). All treatment-naïve individuals with TDRM at baseline were included. Persistence of TDRM was quantified via reversion rates (RR) determined with interval-censored survival models. Fitness costs of TDRM were estimated in the genetic background in which they occurred using a previously published and validated machine-learning algorithm (based on in vitro replicative capacities) and were included in the survival models as explanatory variables. In 857 sequential samples from 168 treatment-naïve patients, 17 TDRM were analyzed. RR varied substantially and ranged from 174.0/100-person-years;CI=[51.4, 588.8] (for 184V) to 2.7/100-person-years;[0.7, 10.9] (for 215D). RR increased significantly with fitness cost (increase by 1.6[1.3,2.0] per standard deviation of fitness costs). When subdividing fitness costs into the average fitness cost of a given mutation and the deviation from the average fitness cost of a mutation in a given genetic background, we found that both components were significantly associated with reversion-rates. Our results show that the substantial variations of TDRM persistence in the absence of drugs are associated with fitness-cost differences both among mutations and among different genetic backgrounds for the same mutation.

Data collection and criticality analysis for cost effective maintenance during the life cycle of a flue gas line

Työn tarkoituksena oli kerätä käyttövarmuustietoa savukaasulinjasta kahdelta suomalaiselta sellutehtaalta niiden käyttöönotosta aina tähän päivään asti. Käyttövarmuustieto koostuu luotettavuustiedoista sekä kunnossapitotiedoista. Kerätyn tiedon avulla on mahdollista kuvata tarkasti laitoksen käyttövarmuutta seuraavilla tunnusluvuilla: suunnittelemattomien häiriöiden lukumäärä ja korjausajat, laitteiden seisokkiaika, vikojen todennäköisyys ja korjaavan kunnossapidon kustannukset suhteessa savukaasulinjan korjaavan kunnossapidon kokonaiskustannuksiin. Käyttövarmuustiedon keräysmetodi on esitelty. Savukaasulinjan kriittisten laitteiden määrittelyyn käytetty metodi on yhdistelmä kyselytutkimuksesta ja muunnellusta vian vaikutus- ja kriittisyysanalyysistä. Laitteiden valitsemiskriteerit lopulliseen kriittisyysanalyysiin päätettiin käyttövarmuustietojen sekä kyselytutkimuksen perusteella. Kriittisten laitteiden määrittämisen tarkoitus on löytää savukaasulinjasta ne laitteet, joiden odottamaton vikaantuminen aiheuttaa vakavimmat seuraukset savukaasulinjan luotettavuuteen, tuotantoon, turvallisuuteen, päästöihin ja kustannuksiin. Tiedon avulla rajoitetut kunnossapidon resurssit voidaan suunnata oikein. Kriittisten laitteiden määrittämisen tuloksena todetaan, että kolme kriittisintä laitetta savukaasulinjassa ovat molemmille sellutehtaille yhteisesti: savukaasupuhaltimet, laahakuljettimet sekä ketjukuljettimet. Käyttövarmuustieto osoittaa, että laitteiden luotettavuus on tehdaskohtaista, mutta periaatteessa samat päälinjat voidaan nähdä suunnittelemattomien vikojen todennäköisyyttä esittävissä kuvissa. Kustannukset, jotka esitetään laitteen suunnittelemattomien kunnossapitokustannusten suhteena savukaasulinjan kokonaiskustannuksiin, noudattelevat hyvin pitkälle luotettavuuskäyrää, joka on laskettu laitteen seisokkiajan suhteena käyttötunteihin. Käyttövarmuustiedon keräys yhdistettynä kriittisten laitteiden määrittämiseen mahdollistavat ennakoivan kunnossapidon oikean kohdistamisen ja ajoittamisen laitteiston elinaikana siten, että luotettavuus- ja kustannustehokkuusvaatimukset saavutetaan.

Strategisen tuotteen materiaalitoimittajan valintaprosessi

Työn tavoitteena on esittää strategisen tuotteen toimittajan valintaprosessi. Tavoitteena on esittää valintaprosessin eri vaiheet ja niissä huomioitavat asiat sekä eri vaiheisiin sovellettavia menetelmiä ja työkaluja.Valintaprosessi alkaa tarpeen määrittämisellä, joka käsittää sekä tuotteen ominaisuuksien että toimittajasuhteen kuvaamisen. Strategisten tuotteiden kohdalla tavoitteena on useimmiten pitkäaikainen yhteistyömuoto valitun toimittajan kanssa. Tarpeen määrittämisen jälkeen etsitään eri lähteistä, kuten erilaisista kaupallisista hakemistoista, internetistä, ammattijulkaisuista sekä henkilökohtaisten kontaktien avulla, potentiaalisia toimittajia, joista luodaan ehdokaslista. Seuraavana on vuorossa sovellettavien valintakriteerien määrittäminen. Tyypillisesti tarkastellaan ainakin toimittajan taloudellista tilannetta, laatua, tuotantoa, kuljetusta, palvelua ja raportointia ja tiedonvälitystä. Tämän jälkeen suoritetaan ensimmäinen seulonta, jossa karsitaan epäsopivimmat ehdokkaat pois prosessin jatkovaiheista. Tarvittavia tietoja voidaan hankkia kirjallisten kyselyiden sekä puhelin- ja henkilöhaastatteluiden avulla. Yksityiskohtaisessa arvioinnissa suoritetaan perusteellinen toimittajien vertailu aikaisemmin valittujen valintakriteerien mukaan. Toimittajan yksityiskohtaiseen arviointiin on tarjolla erilaisia menetelmiä, kuten luokiteltu arviointi, painotettu pistearviointi ja kustannussuhdearviointi. Neuvotteluihin valitaan tyypillisesti muutama sopivin toimittaja ja neuvotteluiden jälkeen on pystyttävä valitsemaan sopivin toimittaja tai vaihtoehtoisesti pari toimittajaa, joiden kesken sopimus jaetaan.

The development of an information infrastructure for cost estimating in the automotive industry

Työn tavoitteena on luoda yleinen informaatioinfrastruktuuri autoteollisuuden valmistuskustannusten arviointiin. Nykyään tämä kustannusarviointi on laajassa käytössä oleva menetelmä. Se mahdollistaa tuotekustannusten hallitsemisen, mikä lisää autovalmistajien kilpailukykyä. Kustannusarvioinnissa tarvitaan laadukasta tietoa, mutta suoritetussa tutkimuksessa paljastui, että useat seikat haittaavat tätä arviointia. Erityisesti resurssien vähyys, tiedonhankinta ja tiedon luotettavuuden varmentaminen aiheuttavat ongelmia. Nämä seikat ovat johtaneet kokemusperäisen asiantuntemuksen laajaan käyttöön, minkä johdosta erityisesti kokemattomilla kustannusarvioijilla on vaikeuksia ymmärtää kustannusarvioiden tietovaatimuksia. Tämän johdosta tutkimus tuo esiin kokeneiden kustannusarvioijien käyttämiä tietoja ja tietolähteitä päämääränä lisätä kustannusarvioiden ymmärtämistä. Informaatioinfrastruktuuri, joka sisältää tarvittavan tiedon järkevien ja luotettavien kustannusarvioiden luontiin, perustuu tutkimuksen tuloksiin. Infrastruktuuri määrittelee tarvittavan kustannustiedon ja niiden mahdolliset tietolähteet. Lisäksi se selvittää miksi tieto on tarpeellista ja miten tiedon oikeellisuus pitäisi varmentaa. Infrastruktuuria käytetään yhdessä yleisen kustannusarvioprosessimallin kanssa. Tämä integrointi johtaa tarkempiin ja selkeämpiin kustannusarvioihin autoteollisuudessa.