Foreign Direct Investment, Clean Development Mechanism, and Environmental Management: A case of Sub-Saharan Africa

This doctoral dissertation explores the contribution of environmental management practices, the so-called clean development mechanism (CDM) projects, and foreign direct investment (FDI) in achieving sustainable development in developing countries, particularly in Sub- Saharan Africa. Because the climate change caused by greenhouse gas emissions is one of the most serious global environmental challenges, the main focus is on the causal links between carbon dioxide (CO2) emissions, energy consumption, and economic development in Sub-Saharan Africa. In addition, the dissertation investigates the factors that have affected the distribution of CDM projects in developing countries and the relationships between FDI and other macroeconomic variables of interest. The main contribution of the dissertation is empirical. One of the publications uses crosssectional data and Tobit and Poisson regressions. Three of the studies use time-series data and vector autoregressive and vector error correction models, while two publications use panel data and panel data estimation methods. One of the publications uses thus both timeseries and panel data. The concept of Granger causality is utilized in four of the publications. The results indicate that there are significant differences in the Granger causality relationships between CO2 emissions, energy consumption, economic growth, and FDI in different countries. It appears also that the causality relationships change over time. Furthermore, the results support the environmental Kuznets curve hypothesis but only for some of the countries. As to CDM activities, past emission levels, institutional quality, and the size of the host country appear to be among the significant determinants of the distribution of CDM projects. FDI and exports are also found to be significant determinants of economic growth.

Development of Piping Stress Analysis Guideline for Neste Jacobs' Projects

The aim of this research was to develop a piping stress analysis guideline to be widely used in Neste Jacobs Oy’s domestic and foreign projects. The company’s former guideline to performing stress analysis was partial and lacked important features, which were to be fixed through this research. The development of the guideline was based on literature research and gathering of existing knowledge from the experts in piping engineering. Case study method was utilized by performing stress analysis on an existing project with help of the new guideline. Piping components, piping engineering in process industry, and piping stress analysis were studied in the theory section of this research. Also, the existing piping standards were studied and compared with one another. By utilizing the theory found in literature and the vast experience and know-how collected from the company’s employees, a new guideline for stress analysis was developed. The guideline would be widely used in various projects. The purpose of the guideline was to clarify certain issues such as which of the piping would have to be analyzed, how are different material values determined and how will the results be reported. As a result, an extensive and comprehensive guideline for stress analysis was created. The new guideline more clearly defines formerly unclear points and creates clear parameters to performing calculations. The guideline is meant to be used by both new and experienced analysts and with its aid, the calculation process was unified throughout the whole company’s organization. Case study was used to exhibit how the guideline is utilized in practice, and how it benefits the calculation process.

Business process re-engineering -menetelmät myyntiprosessin tehokkuuden parantamisessa (Case-yritys)

Tämän Pro Gradu-tutkielman tavoite on tutkia Business Process Re-engineering menetelmiä myyntiprosessien tehostamisessa. Tutkimuksen teoreettinen viiteke-hys rakentuu myynninjohtamisen, myyntiprosessien ja Business Process Mana-gementin ja Business Process Re-enineeringin ympärille. IT-järjestelmät ovat myös oleellinen osa-alue tutkimuksen kannalta ja niiden osuutta kuvataan niin myyntiprosesseissa kuin Business Process Re-engineering -menetelmien yhtey-dessä. Tutkielmassa perehdytään aikaisempaan tutkimusmateriaaliin ja akateemiseen kirjallisuuteen yllämainituilla osa-alueilla. Tavoitteena on löytää aikaisempia tutki-muksia myyntiprosessien tehostamisesta ja BPR:n roolista näissä tapauksissa. Myös myynninjohtamisen vaikutusta tehokkaaseen myyntiprosessiin tutkitaan, kuten myös IT-järjestelmien erilaisia rooleja tehokkaissa myyntiprosesseissa. Tutkielman empiirinen osio on kvalitatiivinen Case-tutkimus eräässä rahoitusalan yrityksessä. Tutkimus tehdään haastattelemalla myyntihenkilöstöä ja esimiehiä. Lisäksi analysoidaan yrityksen myyntiprosessiin liittyvää muuta materiaalia. Case-tutkimuksen tuloksia peilataan aiempaan akateemiseen tutkimukseen ja tuloksista pyritään löytämään ratkaisuja, miten BPR -menetelmillä voidaan tehostaa yrityksen myyntiprosessia.

Rapport au travail et dynamique de transformation du métier d'ingénieur dans le contexte algérien: le cas de l'entreprise Sonatrach

Cette recherche a pour objet l'étude de la dynamique de transformation du métier d'ingénieur dans le contexte algérien saisi à travers le rapport au travail. Elle repose sur une approche théorique s'inspirant d'une sociologie des groupes professionnels avec une démarche alliant méthodes quantitatives et qualitatives. Prenant appui sur des données recueillies à l'aide d'un questionnaire et d'entretiens approfondis menés dans Sonatrach, la plus grande entreprise d'Algérie, notre étude s'est attachée à faire ressortir les facteurs qui agissent au niveau individuel, organisationnel et sociétal sur les pratiques professionnelles pour deux générations d'ingénieurs. La première a eu pour mission de bâtir le pays à travers les grands projets de développement qui ont caractérisé la période après l'indépendance. La deuxième est arrivée sur le marché de l'emploi, à la fin des années 80, dans un contexte de crise et a payé un lourd tribut à la détérioration de la conjoncture économique. Les pratiques professionnelles se construisent tout d'abord dans le travail, mais aussi dans l'exercice des activités quotidiennes, les relations avec les autres et enfin la satisfaction à l'égard du travail. Tels ont été les points focaux de notre démarche d'explicitation du rapport au travail chez nos ingénieurs. Nous avons mis en lumière l'effet de la position hiérarchique au sein de l'organisation et des types de fonction. La satisfaction tient de la fierté d'appartenir à une entreprise prestigieuse. Chez les jeunes, elle s'exprime aussi dans les avantages matériels et une vision du métier fondée sur la maîtrise technique. Les plus âgés, encore marqués par l'idéologie nationaliste, mettent l'accent sur la participation à l'édification du pays, mais aussi sur la réalisation de soi et la fidélité à l'entreprise. Le rapport au travail s'élabore également au fil du temps dans son cheminement professionnel. Nous l'avons abordé, dans une deuxième étape, en documentant les processus d'intégration et de mobilité au sein de l'entreprise. Les trajectoires professionnelles sont régies par des politiques et des procédures de gestion qui en définissent les modalités, mais elles obéissent également à des opportunités et à des pratiques informelles qui jouent un rôle tout aussi important dans la détermination des profils de carrière. Enfin, le rapport au travail est tributaire de facteurs qui dépassent le cadre de l'entreprise. Dans une troisième étape, nous avons analysé les transformations du système éducatif et leur impact sur la certification des ingénieurs, la crise économique et ses effets en termes de chômage et de précarité et enfin la montée du discours religieux et ses manifestations chez les ingénieurs. Ces facteurs liés au contexte sociétal modifient les représentations et modèlent les attitudes et comportements au travail et à l'égard de celui-ci. Comme le montre notre recherche, le rapport au travail articule, dans une composition complexe, parcours individuels et histoires collectives vécus dans des environnements en évolution. La pratique d'un métier se trouve liée aux différents contextes de socialisation qui traversent les individus. Elle se situe, dans le cas algérien, au croisement d'une formation scientifique et technique qui montre peu de réactivité aux besoins mouvants de l'opérateur économique qu'elle est censée satisfaire, d'une entreprise bureaucratique dans son organisation et dans son fonctionnement où le contournement des règles peut s'ériger en principes de gestion et enfin d'un contexte sociétal qui oscille entre modernité et tradition. Cette dernière est réinterprétée de manière orthodoxe par les mouvements religieux en action dans la société. Ainsi, les ingénieurs investis initialement d'une mission de développement et considérés alors comme "vecteur de modernité" connaissent une détérioration de leur statut et la crise touche la profession vécue cependant différemment selon les générations.

La réforme de l'université au Maroc vue par les acteurs universitaires : une étude de cas de l'Université Maohammed V, Rabat-Salé

Cette étude est consacrée à l’université publique marocaine. Elle se situe dans le champ de l’enseignement supérieur public. Les chercheurs du secteur universitaire au Maroc qualifient la gestion de l’enseignement supérieur de centralisée, bureaucratisée, rigide et incapable de trouver des réponses efficaces à la société. L’université publique marocaine vit une crise : elle a fait l’objet de nombreux critiques sur la nature des services universitaires. Sur le plan académique, elle est inappropriée pour faire face à la demande sociale en matière de l’enseignement universitaire. Sur le plan interne, elle est inadaptée à cause de dysfonctionnement pédagogie, organisationnel et administratif. L’université publique n’a pas été apte à s’adapter au secteur privé en créant des débouchés viables pour ses diplômés. Devant la gravité de la situation de l’enseignement supérieur public marocain, une Commission Royale Spéciale a été créée, dont le mandat était de trouver une meilleure façon de rationaliser le système universitaire. C’est ainsi qu’en 1999, la Commission a établi une Charte nationale de l’éducation et de la formation. Les premiers éléments de la nouvelle réforme ont été mis en application dès la rentrée universitaire 2003-2004. Cette nouvelle réforme est perçue comme un moyen d’améliorer le fonctionnement des établissements universitaires publics. Son objectif principal est de réformer d’une manière globale le système universitaire public. Dans les recherches qui se sont intéressées à la réforme de l’université publique marocaine, nous avons constaté qu’il y a une absence de documentation en ce qui trait aux réactions des acteurs universitaires et professionnels face aux orientations de cette réforme. Dans le but d’apporter des éclaircissements, nous nous sommes fixé un double objectif : déterminer, à partir de la perception d’acteurs universitaires, les effets des orientations de la nouvelle réforme et de ses modalités; connaître les changements organisationnels et leurs exigences. La stratégie de recherche répondant le mieux à notre double objectif était la recherche exploratoire. La démarche que nous avons privilégiée fut celle d’une première étude avant l’implantation de la nouvelle réforme et d’une autre après trois semestres de son implantation. Les questions qui ont soutenu notre recherche sont les suivantes : les attitudes des acteurs universitaires ont-elles été modifiées par l’introduction de la nouvelle réforme? Si oui, dans quel sens ont-elles été modifiées? Est-ce que la nouvelle réforme a modifié les pratiques pédagogiques et financières dans le sens indiqué par la charte? Quelles formes de contribution des acteurs universitaires peuvent-ils apporter à une implantation efficace de la nouvelle réforme? Parmi les quatorze universités publiques que compte le Maroc, nous avons choisi l’Université Mohammed V de Rabat-Salé. Cet établissement est l'une des universités les plus anciennes au Maroc. Elle est caractérisée par un nombre significatif de départements qui ont un potentiel de recherche et une réputation nationale. Aucune université ne dispose d’autant de facultés et de différentes disciplines : lettres, sciences, économie, droit, médecine et pharmacie, médecine dentaire, ingénierie, technologie et autres. La démarche méthodologique retenue est axée sur des entrevues auprès des acteurs universitaires et professionnels de trois facultés : 1) faculté des Lettres et Sciences humaines, 2) faculté des Sciences juridiques, économiques et sociales, 3) faculté des Sciences. Celles-ci sont considérées comme des facultés pilotes par rapport à la nouvelle réforme. Nous avons entrepris deux séries d’entrevues : la première en 2001 avant l’implantation de la nouvelle réforme de l’université et la deuxième en 2005 après son implantation. Nous avons mené au total quarante-cinq (45) entrevues qui se sont déroulées en deux périodes : la première a eu lieu entre décembre 2000 et janvier 2001 et la deuxième entre décembre 2004 et janvier 2005. Lors de la première série d’entrevues, notre protocole était composé de questions spécifiques portant sur les initiatives inhérentes à la mise en application d’un système modulaire, sur les procédures pour restructurer la formation universitaire publique, sur le développement de projets spéciaux et de matériel didactique en rapport avec le nouveau système pédagogique et sur les propositions et les procédures pour la participation de l’université au marché du travail. Nous avons aussi posé des questions concernant les aspects financiers. Enfin, pour mieux comprendre le contexte, des questions portaient sur les évaluations et les recommandations de la nouvelle réforme de l’université publique. Au cours de la deuxième période d’entrevues, nous avons recueilli des données sur le soutien du département au pilotage des objectifs de la nouvelle réforme universitaire, le soutien des instances professionnelles à l’avancement de la réforme, la coopération des enseignants au plan de l’avancement des pratiques pédagogiques et les conditions nécessaires à une implantation efficace. Les réponses obtenues auprès des acteurs universitaires et professionnels ont été soumises à une analyse de contenu. Nous avons opté pour le modèle politique comme cadre conceptuel de notre recherche. Ce modèle nous a aidés à montrer l’importance des acteurs universitaires et professionnels dans les démarches pour l’application de la nouvelle réforme. Il nous a aidés également à comprendre comment les caractéristiques de la communauté universitaire peuvent faciliter ou bloquer la réussite de la réforme en cours. Cette recherche montre dans quelle mesure les objectifs de la nouvelle réforme fixés par la Commission Royale Spéciale sont en voie de réalisation. En ce sens, notre recherche pourrait être utile au plan national marocain : elle pourrait aider les responsables politiques et les administrateurs universitaires à prendre des décisions appropriées au processus d’implantation de la nouvelle réforme universitaire.

A STUDY ON SOFTWARE DEVELOPMENT PROJECT RISK, RISK MANAGEMENT, PROJECT OUTCOMES AND THEIR INTER-RELATIONSHIP

This research was undertaken with an objective of studying software development project risk, risk management, project outcomes and their inter-relationship in the Indian context. Validated instruments were used to measure risk, risk management and project outcome in software development projects undertaken in India. A second order factor model was developed for risk with five first order factors. Risk management was also identified as a second order construct with four first order factors. These structures were validated using confirmatory factor analysis. Variation in risk across categories of select organization / project characteristics was studied through a series of one way ANOVA tests. Regression model was developed for each of the risk factors by linking it to risk management factors and project /organization characteristics. Similarly regression models were developed for the project outcome measures linking them to risk factors. Integrated models linking risk factors, risk management factors and project outcome measures were tested through structural equation modeling. Quality of the software developed was seen to have a positive relationship with risk management and negative relationship with risk. The other outcome variables, namely time overrun and cost over run, had strong positive relationship with risk. Risk management did not have direct effect on overrun variables. Risk was seen to be acting as an intervening variable between risk management and overrun variables.

MQFD: A Model for Synergizing TPM and QFD

This thesis presents the methodology of linking Total Productive Maintenance (TPM) and Quality Function Deployment (QFD). The Synergic power ofTPM and QFD led to the formation of a new maintenance model named Maintenance Quality Function Deployment (MQFD). This model was found so powerful that, it could overcome the drawbacks of TPM, by taking care of customer voices. Those voices of customers are used to develop the house of quality. The outputs of house of quality, which are in the form of technical languages, are submitted to the top management for making strategic decisions. The technical languages, which are concerned with enhancing maintenance quality, are strategically directed by the top management towards their adoption of eight TPM pillars. The TPM characteristics developed through the development of eight pillars are fed into the production system, where their implementation is focused towards increasing the values of the maintenance quality parameters, namely overall equipment efficiency (GEE), mean time between failures (MTBF), mean time to repair (MTIR), performance quality, availability and mean down time (MDT). The outputs from production system are required to be reflected in the form of business values namely improved maintenance quality, increased profit, upgraded core competence, and enhanced goodwill. A unique feature of the MQFD model is that it is not necessary to change or dismantle the existing process ofdeveloping house ofquality and TPM projects, which may already be under practice in the company concerned. Thus, the MQFD model enables the tactical marriage between QFD and TPM.First, the literature was reviewed. The results of this review indicated that no activities had so far been reported on integrating QFD in TPM and vice versa. During the second phase, a survey was conducted in six companies in which TPM had been implemented. The objective of this survey was to locate any traces of QFD implementation in TPM programme being implemented in these companies. This survey results indicated that no effort on integrating QFD in TPM had been made in these companies. After completing these two phases of activities, the MQFD model was designed. The details of this work are presented in this research work. Followed by this, the explorative studies on implementing this MQFD model in real time environments were conducted. In addition to that, an empirical study was carried out to examine the receptivity of MQFD model among the practitioners and multifarious organizational cultures. Finally, a sensitivity analysis was conducted to find the hierarchy of various factors influencing MQFD in a company. Throughout the research work, the theory and practice of MQFD were juxtaposed by presenting and publishing papers among scholarly communities and conducting case studies in real time scenario.

Re-engineering and Re-defining University Libraries in the context of modern Information and Communication Technologies: a study with special reference to the University Libraries in Kerala

Information and communication technologies are the tools that underpin the emerging “Knowledge Society”. Exchange of information or knowledge between people and through networks of people has always taken place. But the ICT has radically changed the magnitude of this exchange, and thus factors such as timeliness of information and information dissemination patterns have become more important than ever.Since information and knowledge are so vital for the all round human development, libraries and institutions that manage these resources are indeed invaluable. So, the Library and Information Centres have a key role in the acquisition, processing, preservation and dissemination of information and knowledge. ln the modern context, library is providing service based on different types of documents such as manuscripts, printed, digital, etc. At the same time, acquisition, access, process, service etc. of these resources have become complicated now than ever before. The lCT made instrumental to extend libraries beyond the physical walls of a building and providing assistance in navigating and analyzing tremendous amounts of knowledge with a variety of digital tools. Thus, modern libraries are increasingly being re-defined as places to get unrestricted access to information in many formats and from many sources.The research was conducted in the university libraries in Kerala State, India. lt was identified that even though the information resources are flooding world over and several technologies have emerged to manage the situation for providing effective services to its clientele, most of the university libraries in Kerala were unable to exploit these technologies at maximum level. Though the libraries have automated many of their functions, wide gap prevails between the possible services and provided services. There are many good examples world over in the application of lCTs in libraries for the maximization of services and many such libraries have adopted the principles of reengineering and re-defining as a management strategy. Hence this study was targeted to look into how effectively adopted the modern lCTs in our libraries for maximizing the efficiency of operations and services and whether the principles of re-engineering and- redefining can be applied towards this.Data‘ was collected from library users, viz; student as well as faculty users; library ,professionals and university librarians, using structured questionnaires. This has been .supplemented by-observation of working of the libraries, discussions and interviews with the different types of users and staff, review of literature, etc. Personal observation of the organization set up, management practices, functions, facilities, resources, utilization of information resources and facilities by the users, etc. of the university libraries in Kerala have been made. Statistical techniques like percentage, mean, weighted mean, standard deviation, correlation, trend analysis, etc. have been used to analyse data.All the libraries could exploit only a very few possibilities of modern lCTs and hence they could not achieve effective Universal Bibliographic Control and desired efficiency and effectiveness in services. Because of this, the users as well as professionals are dissatisfied. Functional effectiveness in acquisition, access and process of information resources in various formats, development and maintenance of OPAC and WebOPAC, digital document delivery to remote users, Web based clearing of library counter services and resources, development of full-text databases, digital libraries and institutional repositories, consortia based operations for e-journals and databases, user education and information literacy, professional development with stress on lCTs, network administration and website maintenance, marketing of information, etc. are major areas need special attention to improve the situation. Finance, knowledge level on ICTs among library staff, professional dynamism and leadership, vision and support of the administrators and policy makers, prevailing educational set up and social environment in the state, etc. are some of the major hurdles in reaping the maximum possibilities of lCTs by the university libraries in Kerala. The principles of Business Process Re-engineering are found suitable to effectively apply to re-structure and redefine the operations and service system of the libraries. Most of the conventional departments or divisions prevailing in the university libraries were functioning as watertight compartments and their existing management system was more rigid to adopt the principles of change management. Hence, a thorough re-structuring of the divisions was indicated. Consortia based activities and pooling and sharing of information resources was advocated to meet the varied needs of the users in the main campuses and off campuses of the universities, affiliated colleges and remote stations. A uniform staff policy similar to that prevailing in CSIR, DRDO, ISRO, etc. has been proposed by the study not only in the university libraries in kerala but for the entire country.Restructuring of Lis education,integrated and Planned development of school,college,research and public library systems,etc.were also justified for reaping maximum benefits of the modern ICTs.

Sustainable Watershed Management: Illusion or Reality? A case of Kerala State in India

Soil erosion is more detrimental and affects the chemical, physical and biological properties of the soil. Degradation of soil and water resources is a worldwide problem. Over the next two decades, it is expected that the world will need 17% more water to grow food for the increasing population in developing countries and that total water use will increase by 40%. The total land area subjected to human-induced soil degradation is estimated as 20 x 106 (km)2 Hence conservation of soil and water is essential for the subsistence of life. This can be made possible through sustainable watershed management. This thesis aims at investigating the condition under which sustainable watershed management is possible in Kerala, in South India. The research has been carried out in three stages. In the first stage a conceptual framework is formulated (Chapter 3) based on the relevant literature (Chapter 2) in the field of watershed management. In the second stage this framework is applied to two existing case studies in Kerala State (Chapter 4). In the third stage, the methodology is used to test out geo textile innovation (Chapter 5) in two field experiments (Chapter 6).

Time and cost overruns of industrial projects in kerala

Poor project planning, implementation and control and the subsequent cost and time overruns are ubiquitous features that have been posing serious concern at all levels - state, national and international. It results in wastage of the nation's scarce resources and retards the socio-economic progress. Although several studies peripheral on project overruns have been made at the national level, no serious attempt has been made at the state level to identify the magnitude of overruns, their causes and impacts on industrial projects. The present study "Time and Cost Overruns of Industrial Projects in Kerala" is an earnest attempt to probe in depth the time and cost overruns and their impact on industrial projects. The study places emphasise on the identification of the real reasons behind the cost and time overruns. It also covers the present project management practices of industrial projects in Kerala.

Ecolabeling and Green Certification for Effective Fisheries Management – An Analysis

Nowadays there is a growing environmental concern and the business communities have slowly started recognising environmental protection and sustainable utilization of natural resources into their marketing strategies. This paper discusses the various Ecolabeling and Certification Systems developed world over to regulate and introduce Fair Trade in Ornamental Fish Industry. Ecolabeling and green certification are considered as part of these strategies implemented partly out of compulsion from the National and International Regulatory Bodies and Environmental Movements. All the major markets of ornamental fishes like European Union, USA and Japan have started putting restrictions on the trade to impose ecolabeling as a non tariff barrier like the one imposed on seafood and aqua cultured products. A review was done on the available Ecolabeling and Green Certification Schemes available at local, national and international levels for fisheries including aquaculture and ornamental fish trade and to examine the success and constraints faced by these schemes during its implementation. The primary downside of certification is the multiplicity of ecolabels and cost incurred by applicants for certification, costs which may in turn be passed on to consumers. The studies reveal serious inadequacies in a number of ecolabels and cast doubt on their overall contribution to effective fisheries management and sustainability. The paper also discusses the inititive taken in India to develop guidelines for Green Certification of Fresh water ornamental fishes.

Integrated Environment for Launch Vehicle Telemetry Data Management

The telemetry data processing operation intended for a given mission are pre-defined by an onboard telemetry configuration, mission trajectory and overall telemetry methodology have stabilized lately for ISRO vehicles. The given problem on telemetry data processing is reduced through hierarchical problem reduction whereby the sequencing of operations evolves as the control task and operations on data as the function task. The function task Input, Output and execution criteria are captured into tables which are examined by the control task and then schedules when the function task when the criteria is being met.

Knowledge management and open access e-theses: Indian initiatives

This paper aims to describe recent developments in the services provided by Indian electronic thesis and dissertation (ETD) repositories. It seeks to explore the prospect of knowledge formation and diffusion in India and to discuss the potential of open access e-theses repositories for knowledge management.This study is based on literature review and content analysis of IndianETDrepository websites. Institutional repositories and electronic thesis and dissertation projects in India were identified through a literature survey as well as internet searching and browsing. The study examines the tools, type of contents, coverage and aims of Indian ETD repositories.The paper acknowledges the need for knowledge management for national development. It highlights the significance of an integrated platform for preserving, searching and retrieving Indian theses. It describes the features and functions of Indian ETD repositories.The paper provides insights into the characteristics of the national repository of ETDs of India, which encourage and support open access to publicly-funded research

Construction waste management in India

The management of construction waste is important today. The scarcity in the availability of aggregate for the production of concrete is one of the important problems facing by the construction industry. Appropriate use of the construction waste is a solution to the fast degradation of virgin raw materials in the construction industry. This paper enlightens the importance of reduce, reuse and recycle (3R) concept for managing the construction waste in India